Camera not recognised

I have a JVC Model GZ-MG27-E Video camera with USB 2.0 output (no fire-wire)
This camera type is not on the list of recognised cameras for Final Cut Express HD
1) Is there a software patch available that will enable it to be recognised?
2) Does Final Cut Express HD only work with a Fire-wire interface?
3) Am I stuck with incompatable hardware and software?
iMac G5   Mac OS X (10.4.7)  
Leeuw

The Apple list of qualified devices is not comprehensive, never has been, never will be. Nearly any miniDV camera with FW will work with FCE, with some you might not have device control but you can still capture & print to tape.
FCE works with DV video via FW. Those are the two key specs to look for - DV and FireWire. MPEG-2 and FW don't make it, you'd still have to use one of the techniques I mentioned earlier.
Are you sure the model 37E supports DV and FW ? The spec sheet doesn't mention them, only MPEG-2 and USB, just like the 27E.

Similar Messages

  • Canon cameras not recognised in iPhoto 11

    Hi, since upgrading to iPhoto 11 my canon cameras (Powershot A3000 and eos 350D) are not recognised. The eos shows 'busy' on the screen but does not show up in iPhoto, and the powershot does nothing. The cameras are not showing in System Profiler of Image Capture either, and do not mount onto the desktop (they have never done that).
    I have checked the firmware of the eos and it looks as if it has the latest version.
    Does anyone have any ideas what to do next?
    Many thanks
    Lisa

    I've been away on holiday so it's been a while since I've bothered to try & sort this... however, today I looked through the related software updates for Canon EOS 350D (http://software.canon-europe.com/products/0010192.asp) and downloaded 2 updates just for the **** of it (http://software.canon-europe.com/software/0039362.asp?model= and http://software.canon-europe.com/software/0039378.asp?model=) and I'm guessing one of them resolved the issue, because when I connected up my camera and switched it on, iPhoto swung into action and there was my camera!
    Yippee!! Normal service has been resumed!

  • Dv camera not recognised pe10

    hi cant get my panasonic nv-dx110 recognised by premier elements 10. my sony dcr-tr7000e has no problems. it has full remote etc. but the pano is not recognised at all, i have tried refreshing the device listings in the registry, but to no avalil!!
    using w7 64 bit

    According to this SITE, your Panny should work just fine.
    However, there can be issues:
    FW cable - but if it works with your Sony, it should be fine.
    FW connector on the computer - but if it works with your Sony, it should be fine.
    FW controller, either on the MoBo, or a FW card - but if it works with your Sony, it should be fine.
    FW connector on your Panny - try it on another computer, or with other Capture software to test.
    The order that you are turning on PrE's Capture module, or the camera. See below).
    Plug in the camera, turn it on, and set to the necessary Mode, such as VCR (do not know that camera) launch PrE and select theand test.
    Plug in the camera, launch PrE, then choose Capture, turn on camera, and select Mode.
    Variations on above.
    Some cameras need things done is a certain order, and that order can make a major difference. When you find the right combo, make note of it.
    Good luck,
    Hunt

  • Camera not recognised Premiere Elements - Vista

    Just moved to Vista (new PC) and find that when trying to use Adobe Premiere Elements 4 my Sony dcr-pc110e digital handycam is not recognised! This is strange as if I connect my camera (via firewire)and turn it on it automatically starts Premiere...also sometimes it will start the camera running (you leave it in pause mode) but not actually capture any footage. I must have a setting wrong somewhere but I can't see what...the firewire card and camera are recpgnised by windows and do not report any problems...in Premiere itself it says no device detected and device offline..!looked on the adobe site and have been through their solutions but as I said all seems ok in this area...Works perfectly on my wife's XP machine. Tried turning off firewalls etc...no joy...Any assistance gratefully received.
    Al

    Hi Al & others
    I also moved to a new notebook & VISTA around May.
    I haven't done any editing for months now.
    We bought Pr.El4 so that it would work with Vista.
    I by chance also have a SONY PC110E. When I plug it in & press play on the camera it doesn't even start-up Pr.El. Then if I start up Pr.El separately it doesn't see that there is a camera attached.
    So my problem seems a bit different to yours but your issue doesn't bode well for helping me.
    Do I need to do something to tell Pr.El that the camera is there. I did the set-up for my camera & Pr.El2 on my old computer so long ago that I can't remember if anything is required
    If you get any advice from Adobe please let me know
    Thanks
    Ashley in Johannesburg

  • Build in Camera not recognised

    Guys,
    I have  Macbook Air 11" 2012 model.
    I wanted to make a snapshot of something using photo booth but I got the message that no camera was attached. When I tried facetime, it said the same thing. Is it possible that there is some hidden setting soemwhere that secretly got switched so I cannot use the camera or is my laptop simply broken?

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Digital camera not recognised on iMac

    Hi
    Yesterday I connected my canon digital ixus camera to my iMac and copied over some photos, via usb, no problem. Today I am trying to do exactly the same but the camera is not seen at all. Nothing has changed, and I have used the same procedure as per many times before (plug it in and get on with it!), Indeed troubleshooting so far:
    No new software loaded
    Camera has been reset to factory settings
    CF card is fine as seen through a card reader
    USB cable fine as used with different device
    Other external hard drive recognized as soon as plugged in
    CF card formatted, and only one photo on it so no "time" issues loading over images.
    Camera battery fully charged.
    Frustrating (as would rather just be able to plug in camera and avoid card reader) and wondering if anyone else has had any issues with digital cameras (canon in particular) not being seen on Imac, anyone have any ideas or thoughts? Have I missed something glaringly obvious today?!!
    Much appreciated i
    ynot
    Message was edited by: ynot704

    Hi ynot704
    Check iPhoto to see if the Canon's image shows up there. All of our other camera's (Olympus & Kodak) mount on the desktop plus open iPhoto. Our Canon opens, shows up and download to iPhoto just fine, but does not mount an image on the desktop or show up in disk utility.
    It's not the iMac, look at this Google Search: [canon not mounting on imac desktop|http://www.google.com/custom?q=canon+not%20mounting%20on%20imac%20deskt op&sa=Search&client=pub-6263300333013957&forid=1&ie=ISO-8859-1&oe=ISO-8859-1&cof =GALT:%23008000;GL:1;DIV:%23336699;VLC:663399;AH:center;BGC:FFFFFF;LBGC:336699;A LC:0000FF;LC:0000FF;T:000000;GFNT:0000FF;GIMP:0000FF;FORID:1;&hl=en]
    Dennis

  • Video content on Canon camera not recognised - can"t import

    Hi, I can't see this problem has been posed recently but I am unable to import video content from my Canon 5D Mk11 camera into iMovie. When I connect the camera to my Mac Appeture opens (which is set as default) and enables me to import the stills on the camera. However, when I open iMovie and click on the import from camera icon all I get is the default of the iSight camera. I have previously imported from this camera but can't recall doing it since I upgraded to Snow Leapard. Can anyone offer any advice? Many thanks.
    Gary

    golferl wrote:
    Hi, I can't see this problem has been posed recently but I am unable to import video content from my Canon 5D Mk11 camera into iMovie. When I connect the camera to my Mac Appeture opens (which is set as default) and enables me to import the stills on the camera. However, when I open iMovie and click on the import from camera icon all I get is the default of the iSight camera. I have previously imported from this camera but can't recall doing it since I upgraded to Snow Leapard. Can anyone offer any advice? Many thanks.
    Gary
    If you get no better suggestions, keep uploading your Canon still files into Aperture, but try uploading its videos to your Mac's iPhoto. You can import videos into iMovie from iPhoto.
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
    LED Cinema Display  G4 PowerBook 1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • Why does iPhoto 9.4.3 not recognise RAW files from a Pentax K3 camera?

    Why does iPhoto 9.4.3 not recognise RAW files from a Pentax K3 camera? It does from a K7.

    Because it requires Mavericks - http://support.apple.com/kb/ht5955
    OS X Mavericks provides system-level support for digital camera RAW formats from the following cameras.
    Supported by Digital Camera RAW Compatibility Update 5.04*
    Fujifilm X-E2
    Fujifilm X-T1
    Nikon D3300
    Nikon 1 AW1
    Panasonic LUMIX DMC-GM1
    Pentax K-3
    LN

  • I havent upgraded my iphone 4 to ios 4.3. Now when i try to back up in itunes, it doesnt recognise my iphone, but sees it as a camera, not giving me the links i need to back up. I have removed itunes completely and downloaded it new.

    i havent upgraded my iphone 4 to ios 4.3. Now when i try to back up in itunes, it doesnt recognise my iphone, but sees it as a camera, not giving me the links i need to back up. I have removed itunes completely and downloaded it new.

    What computer OS are you using. Here are links for iTunes not recognizing the iPhone in different OS.
    Apple:  http://support.apple.com/kb/TS1591
    Windows:  http://support.apple.com/kb/TS1538

  • How do I add a new camera so I can still shoot in RAW? my new camera is not recognised.

    Hi! I have Photoshop Elements 11 and I started with a Canon 1000D, I was able to shoot in raw, then convert my images to JPEG for sharing.
    I have since upgraded cameras and when I upload a RAW file off my camera card, it immediately makes a copy of the photo in JPEG and I can only access that one, the program tells me that my camera is not recognised by PSE 11.
    Can somebody please direct me to the right location to change the camera model, so that I can once again shoot in RAW?
    Thank you!!

    Which camera are the camera raw files from?
    Which operating system are you using?

  • Camera connection device not recognised

    Bought iPad 2 yesterday and camera connection kit, with express need to upload pictures. When we plug in camera connection get error 'device not recognised' , camera is EOS 350d. Any ideas please?

    I havn't got a 350D, but on a 20D I had to change the camera's communication setting from 'Normal' to 'PTP' . Check what value that Communication is set to on your camera, PRINT/PTP or PC connection - it should be on the last of the five setting 'headings' on the camera's settings menu

  • PC not recognising iPad as a camera

    When I connect my iPhone 4 to my PC it recognises it under Devices as a camera,yet when I connect my original iPad to my PC it does not recognise the iPad.
    Is there a way of making the PC recognise the iPad it as a camera under devices?

    The camera option should appear if you've got photos that were taken with the iPad or saved from emails/websites - it won't appear if you've only got synced photos on it. As you don't say what version of windows that you've got you can follow the instructions here for Windows XP http://support.apple.com/kb/TS1857, and Vista and 7 here http://support.apple.com/kb/TS1500

  • IPhoto does not recognise the raw files(.NRW) from my new Nikon camera model P7100,any advice please as running latest version of iPhoto(9.2.1)

    Since changing my little everyday camera to a new Nikon Coolpix P7100 iPhoto cannot import any of the raw files(.NRW),says it does not recognise them.
    I have updated iPhoto to the latest version(9.2.1) but still cannot open them.
    Any ideas please

    The raw from the P7100 is not supported at this time.
    The Raw from every model of camera is different. Note: that's every model not every brand. So, the NEF produced by a Nikon D40 is not the same as the NEF produced by a D60, the CR2 produced by a Canon 350 is not the same as the CR2 produced by a Canon 400.
    Therefore the Raw for every camera model needs to be added individually. If yours is not supported then let them know you want it:
    iPhoto menu -> Provide iPhoto Feedback

  • Installed Lightroom 5.7 Update and Camera RAW 8.7 But still will not recognise my Canon 7D MkK ll even though this is now on the list

    Installed Lightroom 5.7 Update and Camera RAW 8.7 But still will not recognise my Canon 7D MkK ll even though this is now on the list- what can I do?
    Operating System OSx Yosemite IMac.

    What exactly does "not recognise" mean, Kathy?
    You're on Mac (thanks for providing that detail): are you getting a "could not be read" message? If you are, it's a write permissions issue with the destination. Change the permission, and all should be well.

  • New Camera RAW to DNG but DNG not recognised

    I recently purchased a Sony Cybershot RX100M3. The RAW files are Sony's ARW2. I have Photoshop CS4 and Bridge. Naturally they won't recognise the new RAW files. I converted then to DNG using Adobe DNG converter. However CS4 and Bridge would not recognise the resulting DNG. I thought all DNG files were the same. Am I wrong? Has any body ideas how to solve the problem short of upgrading?

    When you convert the files to dng using the dng converter, set the Compatibility to Camera Raw 5.4 and later

Maybe you are looking for

  • My iPhone 4 is saying words when I am texting??

    Well I have had my iPhone 4 for a while and I noticed that last night when I was texting every once and a while in a females voice there would be some words like eff you and so on.. I was kinda shocked so I was woundering if anyone has had this probl

  • I have banned you HP

    i spent the whole day trying to fix my {Content Removed} hp printer!! i finally used their "chat serivice" which was NO HELP AT ALL. so i finally called their number. the first guy i talked to was a complete moron. i am not really good with computers

  • How to test if connection pool is set up correctly in WL 7 SP 7

    Hi all, 2 questions. 1) how do i test if the connection pool i set is working? in the testing tab of the jdbc connection pool in the console page, there is a Test Table Name, i entered 'dual' in the text field. After i clicked apply, there is no indi

  • Manual order number

    Hi , Which exit can be used to set the quotation number programmatically in a quotation. I have the following scenario when the user creates a quotation with reference to a quotation , say 300, the revised quotation number must be 300R1, where can i

  • JCA Adapter for MSMQ in SOA 12c

    Where can I find a good tutorial on how to use JCA Adapter for MSMQ in SOA 12c?