Camera Raw camera profiles does not see D70

I shoot photos with a Nikon D2X and my wife uses a Nikon D70. If I open a D70 raw file, and then go to camera calibration, the profiles available are for various standard profiles and D2X profiles. The D70 profiles do not show in the drop down list. All of the profiles have been downloaded, from Adobe, and installed.
If I open a D2X raw file, the standard and D2X profiles are shown in the dropdown box.
Have I missed something in the installation? Do the profiles have to be loaded somehow?
Thaks, Dennis Edson

Hi Dennis,
This is better asked in the CR forum:
http://www.adobeforums.com/webx?13@@.3bb6a85c
I believe the reason for seeing the D2X label is because that is the same label Nikon uses for all it's models. But it would be best to confirm over there.
cheers!

Similar Messages

ACR does not see D70 in Camera calibrate profiles

I shoot photos with a Nikon D2X and my wife uses a Nikon D70. If I open a D70 raw file, and then go to camera calibration, the profiles available are for various standard profiles and D2X profiles. The D70 profiles do not show in the drop down list. All of the profiles have been downloaded, from Adobe, and installed.
If I open a D2X raw file, the standard and D2X profiles are shown in the dropdown box.
Have I missed something in the installation? Do the profiles have to be loaded somehow?
We are using PhotoShop CS4 on 64 bit and 32 bit systems with ACR 5.2. Bothe the 32 bit and 64 bit Photoshop have the same result.
Thanks, Dennis Edson

You installation is working correctly. ALL the profiles (including the "standard" ones) you see are for just your current camera model.
The "D2X" in some of the profile names are part of the name of the Nikon picture style they emulate.

Camera Raw 8.4 does not show profiles for my Sony A850.

Camera Raw 8.4 does not show the profiles for my Sony A850. The camera profiles are in the directory, Camera Raw recognizes the photo as being from my A850 in the Camera Raw banner, but the only profile available is Adobe Standard. This all used to work OK a few months ago.

I don’t see any of these on either my Windows 7 or Windows 8 computer in that normal ACR profiles location. Both have PS-CC/ACR8.4 so maybe they used to be there and were removed?
However, if they are valid profiles you can probably get them to work by putting them in the user-customer-profiles folder:
%APPDATA%\Adobe\CameraRaw\CameraProfiles
%APPDATA% = C:\Users\yourusername\AppData\Roaming
I have over a dozen custom-created profiles in this folder and both Photoshop and Lightroom see them all.
A few years back it wasn't this way, but more recently Adobe recognizes which profiles are theirs and will ignore any others in the Adobe profile area, but it expects to see others in the user-custom-profile area, so move the .dcp files over there.
Did your A850 profiles come from a third party like these:
Imprescindibles
Maurizio Piraccini Photography: Sony (and Minolta) color profiles for Adobe Camera Raw and Adobe Lightroom - UPDATED 201…
http://pskiss.com/shop/cross-camera-color-profiles/

Capture mode does not see external camera

When I use the capture in iMovie, it only allows you to choose the built in iSight camera, and the external web cam is long listed as a choice. The external works fine in other programs (like skype).
Is iMovie intentionally crippled to only work with iSight in capture mode? Or am I doing something wrong?
THanks
bob

Thanks for your help...
It is a Logitech Quickcam Pro 9000 using drivers from mac.
It does show up in USB section under apple system profiler.
It is connected through a powered hub (I have tried it directly connected with no difference).
It is recognized fine in other programs, such as Skype (you can change from isight to external web cam).
I downloaded and installed iGlasses 2, but that did not solve the problem. Curiously, if memory serves me correctly, photobooth only works with isight internal, but after iGlasses 2 install, it works (only) with external (when external is available).
Any other ideas on why iMovie does not see the external web cam?
bob

CAMERA RAW 8.7 DOES NOT WORK.

I have downloaded Camera Raw and DNG Converter 8.7. DNG Converter works fine. Camera Raw 8.7 does not appear in Photoshop CS6 Camera Raw Processor, but opens as 8.4...How do I get 8.7 in Camera Raw/CS6, I also have Lightroom 5.7, but when I go back into Photoshop CS6 a warning says I must have 8.7 Camera Raw.....IS THERE A FIX?

Try downloading and manually installing Camera Raw 8.7 from here:
http://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html

I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5

I have moved my Photoshop CS5 to my traveling computer,a Surface Pro 3. I have photoshop loaded but in trying to look at raw images it says my camera raw does not support the sony alpha 65 which is what I have. I went out and tried to download the newest raw version and even went out and did a zipfile download and it will not update my current version. What should I do

I have 6.0. Tried to download newest verion and it will not download. Went out and then downloaded a zipfile and it still will not download, thus cannot look at my raw pictures.
Thanks, John
m: gener7
Sent: Thursday, December 11, 2014 6:01 PM
To: JOHN STAHLY
Subject: I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5
I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5
created by gener7 <https://forums.adobe.com/people/gener7> in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7007148#7007148>

Capture / FCP does not see camera

I just upgraded to Final Cut Pro 4.0 from Final Cut Express 2.0. and Upgraded to Tiger. The program does not see my camera attached via firewire, though it is seen in system settings. The program crashes when I chose file/capture. I deleted preferences and capture still won't work. Any ideas?
Dual 1.42 GHz PowerPC G4 Mac OS X (10.4) 2 GB DDR SDRAM

You can't just upgrade to QT7 for some reason..you have to do some other trickery to get it to recognize your camera.
Again, found by simple search:
1. Navigate to Library -> Receipts on your main drive (not from your personal folder).
2. Remove all files of the form QuickTime*.pkg, where "*" is a version number. E.g. QuickTime600.pkg, QuickTime650.pkg, Quicktime700.pkg and QuickTime701.pkg. This simply tells your system that those packages are not installed.
3. Go to http://www.apple.com/quicktime/downloads and click on the "download Quicktime" link. DO NOT USE THE AUTOMATIC UPDATE UTILITY. Download QuickTimeInstallerX.dmg. Double click this file (probably on your desktop) and then invoke the installer by double clicking QuickTime701.pkg.
4. After your computer reboots, you should be able to restart FCE and see your camera.

HT4101 I have a NIKON COOLPIX P500 but am unable to download photos through the IPad camera connection kit. I have tried to use the Sandisk card also - no result. Any suggestions? The Ipad does not "see" the card or camera?

I have a Nikon Coolpix P500 but am unable to download photos from it to my iPad2 via the iPad Camera Connection kit. The iPad does not see either the Sandisk 8GB card or the Nikon camera. I have turned the camera on, but it seems that the camera just want to recharge its battery through the iPad as the iPad states that the devices draws too much power?? Anybodu solved this problem yet? Advise please?

One thing to check is the format that the camera is saving pics to the card in. Many are selectable and, in most cases, if PTP is one of the options then you need to have that one selected for the files to be visible to iOS and the CCK (connection kit).
Another thing which sometimes comes up, especially with older cameras and therefore probably not with yours, is the filenaming conventions used by the camera. iOS is quite strict about what it expects to see and if files are being stored with unsupported name formats then they simply won't be seen at all.

Skype does not see camera

Skype does not see the camera any more. I think it was working before - camera works fine with facetime, etc.
I installed recently ESET - could that be it?
Any help greatly appreciated. Fedele

Fedele1965 wrote: ...I may as well use facetime ...
Understood. That is what i do whenever I can. In fact, I always use Apple apps if they can do the job.
BTW, after I posted, it seems that the workaround link I cited may have been edited or modified.
If you decide to try to get Skype working again now, corrected workaround info is available here: http://discussions.apple.com/message/22984254#22984254
Message was edited by: EZ Jim
Mac OSX 10.8.4

IPhoto does not see my camera

iPhoto '09 did see my new Panasonic camera at first, and I could import the images and videos without any issues.
Now - a day later - there is some images and movies on my camera's SDHC card, and it does not see the camera at all. I do see the camera card in the finder. So the card is readable. It is just that all of sudden iPhoto does not see it anymore. I tried hence and forth restarting iPhoto and camera but no luck.
The only thing I did in between was loading of a bunch of images from my camera card (via Camera Connector Kit) to my iPad 3. And removing the images (the iPad 3 does not seem to recognize the videos - which is another issue...) via the Photo app on iPad. I then wanted to load the videos (and some new images I tookl direcfly to iPhoto on my iMac. But htat now does not seem to work.
Any tips are much appreciated!

Try these:
1) Go to Disk Utilities and repair permission -- see if it works. If not go to #2
2) If that doesn't work d/l a program call OnyX. Make sure you get the the specific version for the version of OS X you are running. Run the program and go to Maintenance and run all three options Permissions (reset home directory checked), Scripts (run all, but don't delete logs), and rebuild (check LaunchServices and dyld's shared cache). Then go to Cleaning. In System check Kernal and Extentions and Other components. In User make sure at least Applications and Temporary items are checked. You can check the others if you want - no harm will come, just more time. You will be asked to restart your computer each time, but ignore until you have reached this point. When you have done all of the above reboot
Test again. Your camera shoud show up.

I am trying to import i frame from an SD90 video camera to iMovie, but it does not see the camera. Footage goes to i photo Why?

I am trying to import video ( i frame) from an sd90 ( listed for mac) but i movie does not see the camera. It imports into i photo. Is this normal ?

If you quit iPhoto and iMovie (with the camera still attached) then put the camera into VCR playback mode. Then launch iMovie and see if it can see the camera. If not, get out the power adapter for the camera and plug it into the wall, plug the camera into the power adapter. Reboot your Mac and wait for iPhoto to launch again automatically. Don't let it import the clips, just say No, quit the program. Then put the camrea int VCR/Playback mode, launch iMovie and check again to see if it can see the camera. Once iMovie sees it the first time it should be quicker to recognize it in future. But iPhoto does try to race in there and grab everything first.
To turn this off go to iPhoto Menu in iPhoto > Preferences > Look for Connecting camera opens: (click on the pulldown menu and choose No Application) This effectively turns off iPhoto when you first attach the camera. And it opens the way to iMovie recognizing it quicker.

I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good.

I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good. Has something changed? Thanks!

If neither iPhoto not IC can seethe card it might suggest an issue with the card or the ports on the camera/mac.
Try reformat the card, change the ports and/or use a USB Card Reader.

I have had no previous problem downloading iPhone pict to my Mac, but now, although the Mac sees the iPhone, iPhoto does not see the camera roll. Any ideas?

I have had no previous problem downloading iPhone pict to my Mac, but now, although the Mac sees the iPhone, iPhoto does not see the camera roll. Any ideas?

Repair your disk permission: http://bit.ly/OeD7U3.
Run Cleanup tool http://bit.ly/vnukXY
Download updated driver from Lexmark website www.lexmark.com
Run firmware update http://bit.ly/AcNqbg
Reset printing system http://support.apple.com/kb/HT1341

IPhoto does not see the camera

iPhoto does not see the camera, although it worked really well for two years. Computer has been regularly updated. Please help, thank You.

Image Capture doesn't see the camera. I have tried with two different Sony cameras, that I have been using for a long time on this computer. It is iMac 27''. Both of these cameras work normaly in MacBook Air, that means that the problem is not in the camera, or the cards. Those are the things I have tried so far. Only difference I created on the computer is that I have, two or three days ago, installed external hard drive WD My Book Studio which is connected to the computer by FireWire 800.

I imported from an SD card onto my iPad air 2, how do I get them into LR? LR mobile does not see them, only sees camera roll not the rest of my photos. HELP!

Using the import connection to my iPad Air 2 I uploaded pictures taken on my DSLR. I want to get them into LR Mobile and then into LR but LR mobile and even CC does not see them on my iPad. What do I do? Any and all help appreciated.
Thank you.

RAW import is not yet supported. Just guessing that this is what you were trying . - Guido

Camera Raw camera profiles does not see D70

Similar Messages

Maybe you are looking for