Camera raw is not working on my NEF files D600
camera raw is not working on my NEF files D600.. I ALREADY TRIED all of the updates ( first 7.3, 7.4 even the 8.1) i have the photoshop cs6 and im not finding a way to make it read my files!!! even the DMG converter its not reading them!!
It might be the way you are downloading them. I believe that Nikon Transfer has been updated to overcome a corruption bug which affects Adobe products.
If you are using Nikon Transfer, it might be worth updating to the latest version, and downloading your photos again. Or use Adobe Photodownloader instead (I would).
Also, accepted wisdom is to download photos off the memory card using a card reader, rather than via the camera USB, as it is less prone to problems. YMMV.
Similar Messages
-
I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?
it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
Camera Raw: How to use Adobe DNG Converter - YouTube -
Camera Raw CS6 not working properly
I have upagraded from Ps Cs5 to CS6.
I open a file in CR, and modify the exposition. After that, I modify the clarity: immediatly, the exposition goes back as it was before the modification ...
After the work on CR, I finish the file and go back to bridge: the image is not modified ! But if I dobble click on the same image in bridge, the file is opening in CR with the modifications: so this modifications are note visble on bridge ...
Some body can help me ?
I work with the last version of Br and Ps CS6.
Thanks,
Michel, [email protected]Thanks a lot, Adriana, it is working ! You are right, it is the Nike plugins responsibility. Everything is OK now.
Salutations and many thanks from Guadeloupe, French West Indies
Michel GOGNY-GOUBERT
Le 4 mars 2014 à 17:42, adriana ohlmeyer <[email protected]> a écrit :
Re: Camera Raw CS6 not working properly
created by adriana ohlmeyer in Adobe Camera Raw - View the full discussion
If you have Nik plugins installed, please check reply # 8 on this thread:
http://forums.adobe.com/message/6045415#6045415
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6179192#6179192
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6179192#6179192
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6179192#6179192. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Camera Raw at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Camera Raw synchronization not working
I'm using camera raw 8.1 in photoshop cs6 extended. When I select several images in bridge to synchronize the settings camera raw will not change all of the files. It will work occassionally when I select only 1 file to sync. This was working in the past and just started acting up. Any advice or how I need to set preferences? Thanks.
Hi there.
I have exactly the same problem with Bridge CC 6.0.1.6 and ACR 8.3.0.141. This always worked properly when I was using Bridge CS3. I am using a Mac running Mac OS 10.8.5
The only change on the detail tab that is consistently synchronized to all selected photos is the white balance (when not set to auto). I called Adobe tech support last night. They gave me the following steps. It appeared momentarily to resolve the problem but it persists. I already had the latest Bridge and ACR versions installed and the permissions on the cache folder was set correctly.
Howard
Troubleshooting steps from Adobe:
Please follow these steps to begin with basic trouble shooting regarding your bridge cc issue:
1. Update to the latest version of Bridge.
Download the latest Bridge update by going to Help > Updates or from the Adobe website at http://www.adobe.com/downloads/updates.html.
2. Reset preferences, reset the default workspace, and purge the cache.
You can also purge the cache by doing the following:
Choose Edit > Preferences (Windows) or Bridge > Preferences (Mac OS).
Select the Cache panel.
Click Purge Cache.
Or, you can manually purge the cache by doing the following:
Bridge > Preferences (Mac OS).
Select the Cache panel.
Look at Location and note the path for the Cache folder.
In the Finder, navigate to the Cache folder.
Drag the Cache folder to the Trash (Mac OS).
3. Reset the permissions of Application Support Folder:
In top menu Bar -> Go->Go to folder
Type in ~\Library
Select Application Support right click get info and Under sharing Permissions please change all permission to read and write. -
Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When
I try to open Nikon D810 NEF files, I get photoshop error that says
"cannot complete request your because it is not the right kind of
document. These NEF files wont open in Bridge at all. What am I doing wrong?Camera Raw plug-in | Supported cameras
-
Camera Raw 4.6 Update & Nikon D810 NEF File Issue
Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When
I try to open Nikon D810 NEF files, I get photoshop error that says
"cannot complete request your because it is not the right kind of
document. These NEF files wont open in Bridge at all. What am I doing wrong?8.6 Camera Raw plug-in | Supported cameras
-
"open in camera RAW" is not an option in the file menu
Using Photoshop/Bridge CS3, Windows XP Pro SP2, and ACR 4.5, the "open in camera RAW" is not an option in the file menu. Why is this option missing and how can I get it back?
Thanks,
TomHi,
The D610 requires camera raw 8.3 which is not compatible with your PSE 10.
You need to upgrade to PSE 12 (or later) or use the free Adobe DNG converter. The converter will take a flder containg your NEF files and converte them to DNG files. The DNG files can then be used by PSE 10.
DNG Converter 8.7
Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5858
Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5864
Useful Tutorial
http://www.youtube.com/watch?v=0bqGovpuihw
Brian -
Bridge and Camera RAW preferences not working
I'm setting up a new Macbook Pro, late 2013 15", 10.9.2
CS6 Production Premium, Also have Indesign CS6, LR5, Acrobat Pro 11. Camera RAW is version 8.4. Everything is up to date.
Bridge and Camera RAW preferences are not working correctly. Bridge prefs related to Bridge display, e.g. color theme, text beneath thumbnails, favorite locations, etc.. all work fine. Bridge prefs open and close fine with no errors. "Double Click Edits Camera RAW Settings in Bridge" does not take. Photoshop launches to open Camera RAW regardless of whether this is checked or not. Camera RAW preferences will not open. Selecting "Camera RAW Preferences" from Bridge does nothing. Camera RAW seems to work fine hosted by Photoshop.
I tried a new user with the same results.
What's up with this? Anyone else seeing this? Solution?
--Davidfixed it with this work around
Camera Raw 8.4 | No metadata or Camera Raw edit -
Please help me? My Camera Raw does not work?
Hi, I recently purchased the full version of Photoshop CS6 from Adobe. However the Camera Raw doesn't work even after I did the updates. I contacted someone in the chat and they refused to help me, because I purchased the full version instead of the CC. Can anyone help me please?
Thank you so much Jim. I really appreciate your support. I opened some files with the Nikon software and it works just fine. :-) I never thought the problem can be in the camera software. Just some quick shots to test the Camera Raw:
-
Camera Raw does not read previously saved XMP files (Canon 60D)
Hi,
I want to ask if it is a real problem or just me doing something wrong.
I open RAW files made with Canon 60D (Photoshop CS5, Camera Raw 6.6), then I do what a do (cropping, exposure changes, sharpen ... etc.), then I click the Done button. Camera Raw saves XMP files along with the RAW files. After this I want to do some more editing, I open the RAW files, but Camera RAW does not "remember" what it did just minutes before. I suppose that it is not reading the XMP files that it created.
So is it me or it is some kind of bug?
I don't have this problem when editing RAW files made with Canon 400D.
Thanks for your time!Bo LeBeau wrote:
If I understand correctly the issue is not viewing in Bridge, but rather that ACR doesn't remember the changes.
There is a discussion in the Camera Raw forum about this issue of not always reading the changes after clicking Done in ACR.
But no solution.
http://forums.adobe.com/message/4096784#4096784
Yes, ACR doesn't remember/show the changes I made.
It seems that I have the same problem as the other forum member from the link. I tried to recreate the issue, but this time all went well and ACR displayed the changes I made ...
It is strange because I had the issue numerous times on two different windows PC's ...
Message was edited by: Orhan Chakarov -
Camera raw is not working.
Why is camera raw not working in photoshop CS6 and bridge? All my photos just show the letters nef. My pdf files show a photo and I can work on them. Help!
We believe we have now fixed the following issue with the Release Candidate version of Camera Raw 8.3, where the plug-in would not work properly under Windows XP. In particular, if you saw this message:
"Entry Point Not Found: The procedure entry point WakeAllConditionVariable could not be located in the dynamic link library KERNEL32.dll."
please download the new build of Camera Raw 8.3 RC from here:
http://labs.adobe.com/downloads/cameraraw8-3.html
If you check the version number of this build, it should be 8.3.0.123 (the early one that didn't work was 8.3.0.122). Build 123 should now work properly.
If you are running on a more recent version of Windows (e.g., Vista, Win 7, Win 8, etc.) or a Mac, you can safely ignore this message because the problem only affected ACR / DNG Converter when running under Windows XP. -
Camera Raw is not working due to computer crashing
I Need some help in figuring out why and how to fix this problem…. My computer crashed and I had it repaired it is the same computer that I initially installed Photoshop Cs6 onto… The photoshop part work just fine, when I try to use the Camera Raw for a Quick Edit. It Tells me That a qualifying product has to be launched at least once to enable this feature… This is very frustrating esp. when you pay so MUCH $$$$$$$ for this product. I do have a license for this… I wish their was a phone number so you actually could talk to someone. But I hope there is someone to help with this issue… Thanks
When your computer crashed and needed to be repaired, I assume something was messed up with Camera Raw and/or Photoshop. I would recommend doing a clean uninstall and then re-installing Photoshop completely. Any PSD you have on your computer will not be affected, but some preferences may be reset to factory defaults.
-
The new Update with the Patch for Camera Raw is not working. Code U44M1P34
Hi there,
i have a problem with the new CC Update - including the patch for Camera Raw 8.7.1
Error Code: U44M1P34
Photoshop CC (2014)
After Effects CC (2014)
Brisge CC
The logfile shows 1 fatal error:
FATAL: Payload 'Photoshop Camera Raw 8_8.7_AdobeCameraRaw8.0All 8.0.0.22 with a number following.
I have tried to uninstall an reinstall. Did not work at all, because the same Problem is shown.
I did not install in other folders. All other updates worked - but not this update. The problem seems to bee only caused by the Camera Raw Update.
Are there others with the same Problem? Any ideas?
Thanks in advance and Greetings,
JoergHi Jeff,
it seems that i have found a dirty, but working solution for my problem on this site: Getting fatal Exit Code 34 when installing an app
To change these 3 folder names and reinstalling of my Programs worked fine without any errors:
Adobe PCD -> Adobe PCDold
backup -> backupold
caps -> capsold
Now the Programs are on the actual status with all updates included and everythings seems to be fine. -
Photoshope CS4 won't open camera raw files from my new camera (Canon EOS 5D Mark II). I've downloaded what should be the correct camera raw plugin update and installed it (5.2) but Photoshop still won't open the files. Any help out there?? Many many thanks for your time in answering this. Inga
Ingadavida,
You need to look for and download the Camera Raw 5.7 update and then install it manually following the instructions on the download page very, very carefully.
While the auto update function seems much improved in CS5 and higher, the Adobe Auto Updater in CS4 (and lower) is totally unreliable, almost always broken in one day or another. Still stuck in the dark ages.
Here's the link for the download page for the Mac version of ACR 5.7:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4682 -
Photoshop Camera Raw Version to Process Nikon 1AW1 NEF Files
I am currently running Photoshop CS6 for Macintosh version 13.0.4 and Camera RAW version 7.4.0.137 and cannot process the raw (NEF) files produced by the new Nikon 1AW1 camera. I have shot test photos with the camera prior to purchase, but can't process the NEF files. Does a Camera Raw plug-in that will work with this camera exist? If not, when will the appropriate plug-in be available?
The Nikon 1 AW1 is not yet supported by Adobe Camera Raw (ACR).
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Adobe never comments on future camera support in ACR but ACR is updated every few months as new cameras come on to the market.
You'll have to use the import software provided by Nikon for now.
Maybe you are looking for
-
Ovi Maps is now going to be completely free
http://www.techradar.com/news/phone-and-communications/mobile-phones/nokia-offers-free-sat-nav-on-ov... Question is, when will this apply to the n900 and when... If tnis post is a cure to your issue, please MARK IT AS SOLUTION. If this post has help
-
Acquire single analog point on each pulse
Hi, I have a query on what i hope is a simple application. Im using a PCI-6220 card and what I would like to do is aquire a single data point which is to be triggered by a digital pulse. The pulse will come from an encoder, and what I would like to d
-
BPC Conversion File - Same External ID for different Dimensions
Hello Experts, I hope you can help me. We are running BPC NW V10.0 SP13 I have a Conversion File for External to Internal Mapping on the DATASRC Dimension. See Image 01 I would now like to use the same 'External ID' to identify the mapping rules for
-
Probs with IOS 8 update on ipad mini
Tried to update my ipad mini for latest version IOS8. Keep getting message that ipad needs to be restored, so tried to do this, and get error message, Ipad could not be restored - unknown error (3014). I have checked that laptop setting are all corre
-
Req. deliv.date should exclude holidays and weekends
Hi guy, When I try to create my sales order. The Req.deliv.date and First date will automatically fill with date. The question is it should exclude weekends and holiday, but the result is not. Just like that The 07/12/2014 is Saturday. How should I m