Camera tracked points not showing up

Hey.
I am familiar with the built in Camera Tracker in After Effects and I have had no problems with it up untill this point.
My problem is that after the 3D Camera Tracker is done analyzing the frames, the track points does not show up on the screen.
If i check on "Render Track Points", they do show up, but when i check it off again, the points disappear again, so that doesn't help me at all.
I got 8 gb ram and a decent graphics card.
Does anyone know a solution to my problem?
Thanks in advance.

Are your view options set to show layer controls?
http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103906c6dea-7eaf a.html#WS66A7ECEA-27AB-4fab-B6D6-39977725A870a

Similar Messages

3D camera track points not displaying correctly

Just bought a new iMac and am re-installing all of my programs including Creative Cloud programs. I am having an issue with After Effects not displaying all the track points when I use the 3D camera tracker. I get maybe 6-10 points displaying but that is it. They are there because I can still create nulls, solids, shadow catchers, etc... but the points themselves will not display. I have used the camera tracker in the past with no problems at all. Any idea why this would be going on? Here are my iMac specs...

Try some of your older footage. Some footage produces very few tracking points, other footage produces a lot. Sometimes you need to scale up the size of the track points to see more of them. A screen shot would help us diagnose your problems.

Null object not following 3D camera tracking points.

After applying the 3d camera tracker I right click between three targets and select "create null and camera", this creates a null object correctly aligned with the selected target and a camera, however, when I scrub through the timeline the null object is not tracking along with the selected target in the scene, it just stays in the one spot on the screen. It only just started to have this problem, it had been working fine before and all of a sudden its not working. Is there a way of fixing this? Did i accidentally deactivate the feature some how? Cheers Luke.

I'm not sure I follow your description. When you say the null does not track with the target, that would be correct if the target is something that is moving in the scene because the 3D camera tracker solves for a moving camera solution by analyzing the change in parallax of fixed geometry in the scene. IOW, it's looking for things like buildings and roads and rocks that do not move. The camera is then added to the scene and 3D object you add to the scene should stick to the plane in the scene where it was placed. In other words, if you stuck a null to the sidewalk or to a wall, the null would stay stuck to the wall.
If, on the other hand, you want to attach a null to something moving through the scene, like someone walking or a car driving, then Camera tracking is not the right tool. You need to use AE's motion tracker or Mocha to track the moving object inside the scene. That tracking data is what you must use to attach a null, or a layer, or text to something that is moving through the scene.

Camera new d810 not showing pix up in raw files in elements 11

camera new d810 not showing pix up in raw files in elements 11 and lightroom 4

DNGC 8.7 can be found, here: http://www.adobe.com/downloads/updates/
You can purchase upgrades to LR and/or PSE, here:
http://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_software _sl_mostpopular.html

My camera button is not showing up in my Locked Screen on my iPhone 4 but will show up when I get a notification.

My camera button is not showing up in my Locked Screen on my iPhone 4 but will show up when I get a notification.

Double Click home button, then tap the camera icon next to the slide to unlock.

Changes I make in camera raw do not show up or update in bridge.

Greetings.
I’m working in PS CS4 in XP(government).
Changes I make in camera raw do not show up or update in bridge.
These images DO process with the changes when I run my actions.
For example: Open images in bridge. Edit. Open reaming images in camera raw. Push the images two stops in camera raw. Close camera raw. Images in bridge show no change. Run action to turn raw files into psd. Final PSD appear pushed two stops.
Purging Cache make no difference.
Thoughts?

You are using Embedded thumbnails. These are small and fast, but do not show raw edits.
You need to use one of the HQ thumb options to see the edits.

Camera icon is not showing and mobile gets overheated quickly

The camera icon is not showing And I can't access camera and the device overheating quickly

You could simply access the camera by pressing and holding the camera dedicated key which is placed at the bottom of all other bottons. Was your device every exposed to water? That could also be a reason of heating up. But if no , then you should turn off your device and wait about 10-15 minutes. After that power on your device and change the screen brightness to automatic or lower the brightness . You could also turn off Auto-sunc Data , location NFC , bluetooth. I know that playing boom beach with maximum screen brightness will really heat up your device but i never had a situation where my camera get's closed beucause of the heat. I had warnings that the device is getting warmer . If its possible press dont show again and OK and if the message gets closed you should be able to take some pictures.

I have a mac osx tiger. The camera light is not showing on. Can no longer receive or send video feed for skype calls. How can I get my camera back to working? Thanks Madhu

I have a mac os x tiger. The camera light is not showing as on. I can no longer receive or send video feed. How can I set my camera back to on?
Thanks Madhu

Troubleshooting the iSight camera:
http://support.apple.com/kb/HT2090
and
http://support.apple.com/kb/HT2090

Camera attributes do not show (sometimes)

I am aiming to configure a webcam (Trus Exis) so that the camera attributes can be configured in labview. This followed in a program (see attatched), however it sometimes does not work (camera attributes return empty and cannot be written). I am not totally sure of the problem as it appears quiet random, however after playing around a bit it appeared that it works better if I quickly stop and then start the vi again. To test this I placed the vi in a while loop and added a wait function. If this wait is 10ms the defect disappears, at 1sec it works about half the iterations, and at 10sec it occasionally works.
One thing I also noticed is that in IMAQdx Configure Grab VI the check if session in exists always returns true (so path isn't found) and the standard path (cam0) is sent. Now however, this is the same path that is inputted. So I suspect this might be a couse of the problem too.
Anyone have any ideas on how to solve this? Help is greatly appriciated.
Attachments:
test01.vi ‏58 KB

Hello ThiCop,
Thanks for your reaction, in The max it is showing that the camera connection is DirectShow. I have rebooted my pc so I could give you a clean MAX report (plugged in webcam after windows booted). This is the ni_support.zip. Here all camera Attributes show and can be edited at will (I think this is the sometimes that my program does work). Then I closed the MAX and reopened it (you could see it check for the webcam again and it was found again) this is the second report, here the camera attributes do not show.
I tried opening your reccomended vi to test it but as I have labview 9.0 (student edition) I was unable to open it. I have however used the NI examble Grab and basic attributes.vi and here it worked after rebooting the pc. Stopping and restarting the program makes the vi stop being able to edit the attributes (still getting image though). As said before I suspect it might have something to do with time between starting and stopping the VI. If I place a grab and read attribute configuration in a while loop (so that the camera is configured and stopped multiple times) it appears that with a short wait (so a short time betueen the stopping and restarting) it works more often then with a long wait. Here the long wait still shows a immage if the attributes are not shown.
Although it might seem like a strange problem I hope you can help me further. Just ask for more info if I have not suppied enough.
Thanks in advance
Attachments:
ni_support.zip ‏371 KB
ni_support2.zip ‏370 KB

Just downloaded iOS 5 update to my iPhone4. One new feature is ability to access photo app from lock screen by tapping "camera" icon. Camera icon does not show up on my lock screen. Help?

Just downloaded iOS 5 update to my iPhone4. One new feature is ability to access photo app directly from lock screen by tapping "camera" icon. Camera icon does not show up on my lock screen. Help?

Press the home button once to wake the phone into lock mode. Then press it twice while in lock screen and you will see camera button to right of slide.

Show focus points - not showing...

I'm shooting with a 1D Mark III, and when I select "show focus points" not seeing the focus points...
Is this supposed to actually show where my focus point was on the shot(s)
That would be very helpful. What am I doing wrong?

Allan Eckert wrote:
I don't know what Kirby is talking about. He seems to be answering someone else's question.
It reads pretty clearly to me.
The camera has a sensor. Additionally, it has an array of focus-sensors that are fixed in position relative to the main sensor. Which of these focus-sensors was used by the auto-focus system to determine the focusing distance is what is displayed by the feature under discussion.
The point I'm trying to make is that the "focus point" in the discussion refers to which exact focus-sensors in the camera were used to achieve auto-focus. Unless your camera and your subject did not move between the time of focus-lock and the time of exposure, there will not be an exact correspondence between the spot on the sensor that is associated with that focus and what is depicted under that spot in the image.
In my practice, I find it much more awkward and time-consuming to select a focus point while the shot is framed than it is to focus with the central cross-type focus-sensors, lock focus, and then frame the exposure. So for me -- and I think many others -- knowing which focus-sensor was used by the auto-focus system doesn't tell me anything: there is no correspondence between the focus-sensor used and the image.
In the linked blog post, the author shows an image with the selected focus-sensor super-imposed over the model's upper eyelid. IME, it is assuming too much to assume that the autofocus system used that spot on the model's face when it determined the focusing distance.
There are programs that will analyze the actual image and attempt to show what parts of the image are in sharpest focus. Aperture does not do that.
This is -- as I indicated -- tangent to the OP's question. But the way s/he worded the question made me think that s/he things there is a certain one-to-one correspondence between the focusing-sensor used and the objects depicted under that focusing-sensor when it is superimposed over the image. There is not. I found that important to know, and so I pass it along.

My iphone has currently been restored but my camera roll is not showing up in my photo application as well as my iphone 4 is reading as a iphone 3

my phone has been not loading uplately taking longer to open apps and also force closing them as well but my main consern is that my camera app and my photo app seem to be out of sync the pictures i take on my caera app do not show up in my carea roll on my photo app

I think you're referring to the import wizard that pops up when you connect any camera to the PC, correct? Yes, it does have it and normally that pops up but it doesn't anymore. I've gone into the control panel and set it so that it asks me everytime what I want to do everything it's connected but that didn't help. I just noticed that when I go into device manager that there's a yellow exclamation mark next to the iphone so I'm assuming that has something to do with the issue but I'm not sure how to resolve it.

Join CD tracks option NOT showing up in iTunes 11.4

Once again, Join CD tracks option refuses to show up when I am trying to import an audiobook CD. The tracks are sorted consecutively by track Name, I am selecting all the tracks, and the options menu upper right of the window does NOT show Join CD Tracks.
I have separately and together varied the following: toggled the compilation CD box off and on;
restarted iTunes;
switched from one CD to another in the same set;
change the 'type' from 'spoken & audio' to audiobooks to music to unclassifiable
and still no joy.
I have used Join Together to join tracks from Audiobooks but if starting from individual tracks, CD by CD, there are always a few chapters out of place. I need this first step to work.
Is there anywhere else to look for a variation to make the lost option reappear?

"The tracks are sorted consecutively by track Name"
You need to sort consecutively by track number for the Join Tracks option to be available.

When i connect my camera - it is not showing up in iPhoto

When I connect my camera to my Airbook - the camera does not show up in iPhoto.

Something is not working - you need to fix it
with no mind readers here it is important to have some information
What version of iPhoto?
What camera?
Has it ever worked?
Does it work with image capture?
Have you tried a card reader?
Any otther info?
Or would you like some random guesses
LN

Camera Calibration profiles not showing

On Vista Business SP1, only ACR 4.4 and ACR 4.2 show in the Camera Calibration tab, in both ACR 5.3 and Lightroom 2.3.
Both
C:\ProgramData\Adobe\CameraRaw\CameraProfiles\Camera
and
C:\ProgramData\Adobe\CameraRaw\CameraProfiles\Adobe Standard
are present, with entries for my Canon 40D. The profiles were showing in earlier (beta) versions of ACR and Lightroom, and, I think, in the latest version, but now are not showing.
Thanks for any help.
Dan Dill

Somehow my install must have gotten munged.
I just reinstalled PS (and so Bridge and ACR) from the CS4 distribution, applied the related updates, and now the camera profile show properly in ACR 5.3 and LR 2.3.
I should say, the reinstall and update process went without a hitch, for which I am grateful.

Camera tracked points not showing up

Similar Messages

Maybe you are looking for