Camileo P100 camcorder won't store the date and time

My recently purchased camileo P100 camcorder won't store the date and time.
Every time it is started it has to be reset as it returns to the default date.
Has anybody else had this problem

I've got the same problem and reported it allready to Toshiba support.
Although I mentioned that there were allready more people who posted this problem, toshiba replied that they didn't receive such complaints. I was advised to return my camera to the reseller which I did'n do because I think it's a software problem so all the P100's have the same problem

Similar Messages

  • My Apple TV won't set the date and time! What can I do???

    My Apple TV won't set the date and time! What can I do???

    That means it's having trouble connecting to the network. Make sure location is set correctly. DNS should be set to automatic. Ensure router is up to date, reboot all devices. If on wifi try ethernet.

  • Why won't the date and time stay in the menu bar?

    I just installed 10.6.2 and even when I use System Preferences to check the box in the Date/Time panel they flicker and disappear from the menu bar. Why won't the Date and Time stay in the Menu Bar? Any suggestions? Thanks.
    Frank B

    Doesn't any bring up the fact that Apple has so many customers with problems that the refuse to help unless you pay them cash? They update you and screw you over and then offer no useful troubleshooting scenarioius to help their millions of customers. It is because they want millions of our dollars. I hate Apple.

  • Camileo S20 - How to display the date and time

    Hi, to all. I have got as Christmas present the Camileo S20 and I am not able to display the date and time at video. In manual is no mention about this, just how to set the correct date and time. But what is intention of setting the date and time into camera, if it is not possible to display them on video ?

    Hi,
    of course, I did it repeatly, it is written in my question above. I am not stupid.
    This question is aimed to owners of camera Camileo S20 and also Camileo S10 - Camileo S20 is derived of Camileo S10, may be any of them discovered the way how to get the date and time into video.

  • Hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!

    hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!please help!

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • How can i have the date and time show up on my canon vixia hf m50

    Cannot get the date and time to show up onscreen in ANY videos on my new vixia HF M50. Can somebody help me on this?

    Hello Jerrysulew, 
    You can show the date and time using the Captions option.  The process is described below.
    Add a new level of enjoyment to your scenes by decorating them. You can add animated graphics, stamps and even your own freehand drawings. The supplied stylus pen will be especially useful for decorating scenes.
    You can decorate scenes as they are being recorded.
    IMPORTANT
    The screens and settings that appear may differ depending on the model you are using.
    NOTE
    You can open the decoration screen when the LCD panel is stowed with the LCD screen facing away from the camcorder. In such case, make sure [Autostart Decoration] is set to [On].
    Decorating Scenes while Recording
    1. Touch [ 
    2. Touch [Decoration].
    3. The decoration mode screen appears.
    On the decoration screen, there is a canvas where you can draw freely, and a toolbar with tools lined up for creating your drawings.
    Select the tool you want to use from the toolbar, and make drawings on the canvas.
    Icon
    Tool name
    Function
    Pens and Stamps
    Select the type of pen or stamp and its color. You can also save a canvas or load a previously saved canvas.
    Animated Stamps
    Select animated stamps to add to your decoration.
    Captions
    Add the date, date and time, story title* or story theme* as a caption that will be included in the recording.
    Image Mix**
    Choose one of 27 different frames to add onto the canvas. Image mix can be used in combination with the pens, stamps and animated stamps.
    Freeze screen**
    In recording mode: pause the live video. Touch [ 
     again to restore the live video. You can add decorations to and record the frozen image.
    In playback mode: pause the playback. Touch [ 
     ] to resume playing back the scene.
    Minimize toolbar
    Minimize the toolbar to the top of the screen to view almost all of the canvas. Touch [ 
     ] to restore the toolbar.
    * Not available in 
     mode.
    **Not available in 
     mode and for MP4 movies.
    4. Use a tool from the toolbar as explained in the following procedures.
    5. PressYou can add decorations even while recording a scene.
    6. Touch [ 
     ] to exit the decoration screen.
    NOTE
    For AVCHD movies, decorations will appear in the thumbnails of scenes in the [ AVCHD Movies] index screen and gallery. For MP4 movies, decorations will not appear in thumbnails.
    To use [Pens and Stamps]
    1. Touch [ 
    The [Pens and Stamps] screen will appear.
    2. Select the desired pen or stamp from [Tools].
    Select Colors.
    Touch [ 
    Select white or black from [Colors].
    Alternatively, you can touch [ 
     ] and select a color from the displayed colors.
    3. Draw freely on the canvas.
    Touch [ 
     ] > [Clear] > [Yes] to clear the canvas and start again.
    NOTE
    The canvas with decorations can be deleted, saved, and loaded.
    You can save the decorated canvas right after a decorating action.
    If the memory that contains the canvas is initialized, the canvas will be deleted.
    To use [Animated Stamps]
    1. Touch [ 
    2. Touch one of the control buttons.
    3. Touch anywhere on the canvas to place the selected animated stamp. You can also drag some animated stamps to a different location.
    NOTE
    When the [Animated Stamps] tool is used, the date/time will not be displayed or recorded.
    To use [Captions]
    1. Touch [ 
    2. Touch [Date] or [Time].
    When recording a scene using Story Creator, you can also select [Title]
    (the story&&&&&&&&&s title) or [Story Scene] (the story scene category).
    3. Select the desired text settings and touch [ 
    Touch [ 
     ] (white text on dark background), [ 
     ] (white text) or [ 
     ] (black text).
    Touch the caption and drag it to the desired location.
    To use image mix
    1. Touch [ 
     ] to open the [Select Image] screen.
    2. Touch [ON].
    3. Touch [+] or [-] to select a different image mix frame.
    You can touch one of the memory icons at the bottom of the screen to read image mix frames saved on a different memory (When recording on or playing back scenes from a memory card).
    Touch [ 
     ] to mix the selected frame with the live video.
    NOTE
    When [Rec Media for Movies] is set to [ 
     ] (the built-in memory), you will not be able to select image mix frames saved on a memory card (For camcorders that have internal memory only).
    For AVCHD movies, image mix cannot be selected during playback or while converting a scene to standard definition (For camcorders that have internal memory only). Select the image mix during playback pause or before starting the conversion.
    To use freeze screen
    1. Touch [ 
    The control button will change to [ 
     ] and the picture will be frozen.
    Decorate the screen using the other tools in the palette.
    2. Press the
    The decorations created will be recorded with recording scenes that are on pause.
    Press the
    Touch [ 
     ]. The screen will return to normal.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How to have the Date and Time appear on printouts

    The Date and Time used to appear (at the bottom right) on things printed from websites. For example, receipts from an online purchase, an article on the web etc.
    I am able to see the setting to appear at bottom right (in the "File" dropdown).
    Following a Firefox update, I no longer get that very useful "Time & Date Stamp".
    This is very frustrating. Can anyone help?
    Thanks,

    Are you saying you can see the date and time in the "Print Preview" or in the "Page Setup" dialog under the "Margins & Header/Footer" tab. The date and time won't display if it is not set correctly in the "Page Setup" dialog. Also, is this on one specific printer or many different ones? If this is only happening on one printer there may be a problem with the print driver, even though there would be probably more serious things going on than a missing footer. You could also experiment and create a pdf using "PDF Creator" at http://www.pdfforge.org/pdfcreator and see if it comes up on the created document.
    Hope this gives you some headway.

  • How do I find the date and time stamp on pictures?

    How do I find the date and time stamp for my pictures?

    The Photos app will not do this but other apps will. iPhoto has an icon that when tapped with the photo open will show the EXIF information you are looking for. iPhoto is not free but you can purchase it in the App Store.
    There may be other photo apps that provide this information as well.
    PhotoForge2 will show the EXIF data as well as the GPS data if it is available.

  • TS1368 My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?

    My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?

    Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
    If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
    Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
    I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful.

  • Second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

    second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up           
    . Place the iOS device in Recovery Mode if necessary to allow the restore.
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Get the date and time from iframe.

    Hi,
    Am using jdeveloper 11.1.1.6.0., I have used the following iframe source which gets the date and time.
    <af:form>
    <iframe src="http://free.timeanddate.com/clock/i3xb4nm0/n1722/tt0/tw0/ts1" frameborder="0" width="244" height="19">
          </iframe>
    </af:form>
    I need to get the date and time separately to perform some validation. How can i  get it.
    regards,
    Prasad K T,
    9840021070

    Prasad,
    I don't understand your use case. The url you use is a json web service which returns it's result as either xml or json payload. Why do you pretty print this as a web page and try to get to the result this way?
    Why don't you get the result directly using the json result or (AFAIK) the java script api which the service also provides.  Check the documentation of the service.
    From your description I understand that the user enters a time. You need to know if the time is before or after 2:30pm and have to set a 'shift' to A or B.
    Where do I need a timeservice in this validation?
    From what I see your approach won't work. As I still don't understand the use case I don't know how to help.
    Timo

  • Can't change the date and time

    On a recent trip abroad, my N96 automatically switched to the local time on arrival, but it failed to switch back to UK time when I returned. Now my phone is stuck 3 hours ahead, and it won't let me change the date or time manually. When I select Settings | General | Date and time, and click Open, 'Change' flashes up briefly, but even if I'm fast enough to click it, nothing happens.
    I've tried reverting to the Factory Settings, but that did not resolve the problem. I've also checked for Firmware updates, but there aren't any. Any suggestions for fixing this would be very welcome...

    Your operator doesn't seem to support time autoupdate while the operator you connected to while abroad does.
    Go into the clock settings and set auto time update to "off". Then set the time zone to "GMT 0:00 London". This should bring the clock's time back to what it should be. If it doesn't, at least you can do so manually now (having auto time update set to "on" removes your ability to set the date and time manually).
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • My macbook pro keeps crashing and resetting the date and time

    I'm having a problem with my 2010 Macbook pro(ios6.1) with crashing. After it happens I need to reset the date and time. I also have a problem with iphoto, the program won't open. I have reintalled it serveral times and after the update it won't open just the circulating circle appears. I'm running on Mac OS X version 10.6.8  If any one can help it would be greatly appreciated. D.D.D

    If you have to reset the date and time, it may be that there is a power interruption.  I would try a SMC reset.
    http://support.apple.com/kb/HT3964
    I would post you iPhoto issue in the iPhoto forum.
    Ciao.

  • Help... Bug in the Date and Time ?!

    Hello... I have BB Z10 that I bought it a year ago, and very satisfied for my decision to change my Torch into Z10 so far. Recently I have upgrade its OS to the latest one, and I'm quite happy to see myany improvement in it. But after a while, i just realize something strange with my Z10, which I don't know is it really a bug or not? I'm just a loyal user of BB and have no capability in Dev sectors.
    The problem is :
    Everytime I shutdown my BlackBerry, It's clock always change. why it happens? is it really abug?
    First of all, in Date and Time setting, I set my Z10 timezone to my home time zone. And I *set off* the Auto Update Time Zone since i have to work many times to places with different time zone of my home city... and I still want my Z10 to show my Home City Time Zone rather to the place where I stayed for temporary.
    Secondly, sometimes I must Shutdown my Z10, according the rules where I worked. So It's no option at all for setting it to Airplane mode.
    Thirdly, sometimes I always shut my Mobile Service, and change it to Wifi Connection where available. I do it so I can spare my battery life, since in my workplace, sometimes there's no electricity at all, and many times i forgot to bring my charge when i go to town with electricity.
    So... again, everytime i turn on my Z10, the date is always change... and i couldn't recall, is it the time before i'm upgrading my latest OS.
    So, if this is a bug, i hope RIM dev can fix this in the next OS Update. Some other my phone (sucha as Nokia, Samsung, Android, and even my Company Satphone) doesn't have this problem.
    If this is not a bug, what can I do so my Date and Time is not change?
    FYI, as I said before, I CAN NOT set on Auto Update Time Zone, since I LIKE my Z10 to stay in my home zone so it's easier for me to see what time in my home. I've already have to set Date and Time Automatically Bar to *On Position* 9even I don't know for sure what is used for), but when I restarted why Z10, the Date and Time was changing again. Meanfile my Time Zone still the same, to my Home Time Zone. So what exatcly the Set Date and Time Automatically option really use for? My Date and Time still always changing everytime I "turn it on" or "restart" my Z10, regardless that automatic option set on or off.
    Any idea? Thanks for the help
    I sent it from my BBzTen.

    If you back everything up, you can restore everything after the wipe. You will not lose data. After restoring all you have to do is enter your password for your accounts.
    However, if you do that it's possible, not for sure, but it's possible you will restore the problem. If you restore only media and application data you will have to re-add your accounts, reset all your notifications etc. Any apps you had will have to be redownloaded from BBWorld but it's quite quick and easy to do. The wipe will leave the OS in tact so you won't have to do anything with that.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • My iPod 5thG don't work, it turns off all the time, the date and time is other, and I can't connect to the Wi-Fi

    Please I need help my iPod is not working I have problems for the internet, the date and time is other like if today is March 9,2014  and the time is 9:44 Pm it tells me that is March 11,2014  and the time 3:15 Am! And it turns of all the time!

    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.                     
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

Maybe you are looking for