Can a PC share a hard drive connected to Airport Extreme?

I have a new Airport Extreme with a Seagate FreeAgent Desk for Mac 1.5 TB hard drive connected via USB. The Airport connects to the internet via a Linksys Vonage router, and two Macs are set up to use the Airport via wireless. The FreeAgent drive has 4 partitions: 1 for a TimeMachine backup from both Macs, 2 for SuperDuper backups of both Macs, and 1 for home video files and other backups. I also have a Dell PC running Windows XP SP2 hardwired to the same Linksys Vonage router.
I'd like to use partition 4 on the FreeAgent drive to backup the PC. Is this possible, and if so, how do I get the PC to recognize the FreeAgent drive?
Thanks very much for your help.

dwhewlings, Welcome to the discussion area!
Yes, you need to use Bonjour for Windows.

Similar Messages

  • How do I access external hard drive connected to AirPort Extreme via iPad

    Hello,
    How do I access external hard drive connected to AirPort Extreme via iPad / windows laptop.
    I donot have a Mac and I use windows laptop.

    For your iPad, you will need an app, like FileBrowser, to access the external drive.
    For your Windows laptop, you would access the drive like any other network share. The basic format is: \\<servername>\<sharename>, where, in this case, the servername is the base station name and the sharename is the name of the external drive.

  • HT204057 Time machine back up via USB hard drive connected to Airport Extreme.

    Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?  It worked very well.

    Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?
    Time Machine backups are supported via USB hard drive connected to the AirPort Extreme"ac" version.
    Time Machine backups were not supported via USB hard drive connected to earlier versions of the AirPort Extreme.
    Some users who tried this on earlier version AirPort Extremes seemed to have some success with Time Machine backups....some had moderate success and some had no success with this. Count me in the "no success" category.
    See the topic about Time Machine support for USB disks in this Apple Support document:
    http://support.apple.com/kb/HT5924?viewlocale=en_US&locale=en_US

  • Using Time Machine w/external hard drive connected to airport extreme

    I hooked up an external hard drive on my airport extreme. I see it in sharing, however, Time Machine doesn't recognize it as a back-up drive unless I have it directly connected to my MacBook Pro. How do I get Time Machine to recognize the external drive when it's connected to the airport?

    FWIW, the AEBS has known problems sharing a directly connected HD. Take a look over in the AEBS forums, and you'll see that this is a very common problem. Perhaps Apple will update the firmware and rectify this problem.
    Cheers,
    Andreas

  • Can i access music on my hard drive connected to airport extreme with my iphone 5

    Can I access  photos and music on my usb hard drive connected to an airport extreme using an iPhone 5? I can access theme with mac and pc.
    Thanks, Kevex.

    Yes, but not out of the box. You have to download an app like FileBrowser.

  • External hard drive connected to Airport Extreme not working on PC

    I have a Macbook Pro running 10.9.1 and my work laptop, which runs Windows 7. I have a WD 2TB external hard drive connected to my Airport Extreme, with 1TB formatted for Mac and the other 1TB formatted in FAT format. My Macbook can connect to the drive and read/write perfectly fine, but I'm not even seeing the drive on my PC anywhere. I'm wanting to use the Mac formatted partition to backup photos and personal documents and the FAT partition to backup my work.
    Is there a setup thing I need to do on either the Airport Extreme or on my PC to connect to have the drive visible? Both drives are setup to allow file sharing and my Airport Extreme is running version 7.6.4.
    Thanks!

    There are 3 different methods to establish a connection from your PC to the hard drive in this Apple support document:
    http://support.apple.com/kb/HT1331

  • Two hard drives connected to Airport Extreme. How to include one of them in TimeMachine Backup and use other disc as Time Machine backup disc?

    Hi,
    the title says it all. I've got an airport extreme and two hard drives connected to it. My idea was to use one as my additional storage (say DISC STORAGE) and the other one as my backup drive (say DISC BACKUP). I would like to backup my mac AND DISC STORAGE together to DISC BACKUP using time machine. My mac has 256 GB HDD, DISC STORAGE is 1 TB big, DISC BACKUP 2 TB. So there are no space issues.
    Problem: DISC STORAGE is not included in Time Machine's backup to DISC BACKUP. At the moment, only the mac is backed up to DISC BACKUP.
    Does anybody know if and how I can include DISC STORAGE in the backup process?
    By the way, DISC STORAGE is not listed in the "exclude from backup" list in Time Machine.
    Thanks!
    Arne

    Unforrtunately, Time Machine cannot backup from a network drive to another drive. Time Machine will only backup a Mac and a drive that is directly attached to the Mac, via USB or FireWire.
    You will need to use an application like Carbon Copy Cloner or SupoerDuper to be able to backup from DISC BACKUP to DISC STORAGE.

  • Connecting to an external hard drive connected to airport extreme via usb

    I have two computers running off my airport extreme base station. I have a desktop computer connected via an ethernet connection and i have a laptop that connects wirelessly. I have an external hard drive connected via the usb on my Airport. I installed my airport disk utility software on my desktop as it is the computer i store all my itunes material on and it syncs to my ATV. I am able to see my external hard drive as a networked drive on my desktop, and it works fine. However i am not able to see the networked drive on my laptop. I am running Norton 360 on both machines and both machines are running Windows Vista.
    Do I have to install the Airport Disk Utility on both machines? I have read thru lots of threads about this and have not been able to solve this problem. I have gone into my firewall settings and allowed file sharing on my laptop. I cannot think of anything else to do. Any help would be greatly appreciated as this is the main reason I purchased my Airport Extreme.

    I have exactly the same set-up, but I can see the portable drive with my MacBookPro but not with the PC connected by an ethernet cable to the Airport Extreme. How did you get the PC to see the portable drive on the Airport?

  • How do I access my hard drive connected to airport extreme?

    I've already imported video to my hard drive. I had it previously connected via firewire. It's there in an imovie 08. However, when I open up imovie in the "Event Library" panel, my hard drive has a yellow triangle with an exclamation point on it. Does anyone know how I can access this?
    Do I have to choose "import" first and then copy the movie back into imovie? I think this would defeat the purpose of storing the footage on the external drive, right? I'm trying to make my first movie, so please be gentle if this is an easy question to answer. It's throwing me for a loop right now.
    Thanks again!

    sorry, the hard drive is connected via USB to my airport extreme. Here's how i can look at the files:
    Macintosh HD, under "shared" i select my hard drive, open it and then click on imovie events, then i can access the 19 different folders which contain multiple clips in each folder, along with an imovie thumbs file etc.
    However, in imovie when create a new project, then click on import, it will ask me where i want to save the files, and on the drop down arrow, the only choice is my macintosh HD and I can't choose anything else. I really don't want to save them to my computer's hard drive if i don't have to. It seems there should be an easier way to do this, but i'm overlooking something. I just want to be able to make a movie with the clips that are already saved on my hard drive which is connected via airport extreme. Thanks again!

  • Can Time Machine back up a external hard drive connected to Airport Extreme

    I recently purchased a new macbook pro, and airport extreme.
    I attached a 750 GB external hard drive to the macbook pro, and reformatted it so time machine made the initial back up and hourly back ups from there.
    Is it possible to now to unattach the external hard drive and attach it to the airport extreme, where the mac book time machine will back up to the external hard drive through airport extreme?
    i have seen conflicting posts is if this is possible.

    That would probably be safest.
    Note that Apple's position on this got even more negative with Snow Leopard: http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html
    It does work well for some folks, not so well for some, and not at all for others.
    I got a refurb dual-band model in September. It worked well for about 3 months, but lately I get the error 109 and corrupted backups every few days, that Disk Utility can't fix. Once, Disk Warrior could, but since then, if they're corrupted, nothing helps. That's on a year-old Seagate drive that seems fine otherwise, especially when connected directly.
    And I have an excellent wireless connection; it's only about 10 feet from my Mac, speeds are great, S/N ratio is good, etc.
    It makes no sense to me that a TC would work better, but they seem to.

  • Can't save to external hard drive connected to Airport Ex from networked pc

    Hi,
    I have always been able to access the files on my external harddrive that's connected to my Airport Extreme from my wirelessly networked laptop pc and make changes, deletions, save files, etc.
    Sometime in the past couple of weeks, it changed. I still can get to my files on the ext drive and open them, but I cannot save a file that I edited. For example, if I'm on my pc laptop and I'm in Photoshop, I can still get to the files on the external drive that's connected to my Airport Extreme, but once I make my changes to the graphic and hit save, I cannot save the file to the external drive. As a matter of fact, I've now discovered that I can open files, but not save them, change the file name, etc. on the external drive. I have always been able to. My connections, hardware, etc have not changed.
    When I connect to the external drive from my laptop pc, I connect with my mac user name and password. I am an administrator. Thoughts?

    Hello,
    Try running Disk Utility and Repairing Disk Permissions...
    Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select FirstAid, then click: Repair Disk Permissions. Quit DU when it's finished and reboot.
    Carolyn

  • How do I find a hard drive connected to Airport Extreme Base Station?

    *Apple Says:* "If your base station supports it, you can connect a USB hard disk to the USB port on your base station and computers on your network (both wired and wireless) can connect to it to access, share, and store files and data."
    Cool. So I followed the instructions. The drive is recognized by the base station and listed in the Airport Utility. It looks like it's ready to go...
    So... How do I access the drive? I don't see it on my desktop, it's not under network. I've tried "Connect to server..." and browsing, I can't see the drive, anywhere. Yeah, I've searched the crap out of this issue on google and this message board as well as apple support knowledge base. I'm sure this is a simple issue and I'm just missing the obvious. Help me out.

    Hello Timothy Uhl. Welcome to the Apple Discussions!
    Try the following to mount the disk...
    o Click on the Desktop to enter Finder
    o Go > Connect to Server...
    o Enter 10.0.1.1 for the server
    o Enter Disk Password
    o Connect
    If this still doesn't solve the problem, let's double-check your disk sharing settings...
    AirPort Extreme Base Station (AEBSn) - File Sharing Setup
    Either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN ports of the AEBSn, and then, using the AirPort Utility in Manual Mode, check these settings:
    Disks - File Sharing
    o Secure Shared Disks: <With disk password | With base station password | With accounts >
    (Note: Choose "With a disk password," or "With base station password" if you want to secure the shared disk with a password, or choose "With accounts" if you want to secure the disk using accounts.
    If you choose to use accounts, click Configure Accounts, click the Add "+" button, and then enter a name and password for each user that will access the disk.)
    o Guest Access: <Not allowed | Read only | Read and write>
    o Share disks over Ethernet WAN port: (unchecked)
    (Note: Select the "Share disks over Ethernet WAN port" checkbox if you want to provide remote access to the disk over the WAN port.)
    o Advertise disks globally using Bonjour: (unchecked)
    o Workgroup: <Windows workgroup name>
    o WINS server: <WINS server IP address>

  • I want to use external hard drive connected to airport extreme that contains iTunes library to airplay library to apple tv

    I have a macbook 4.1 with 4gb ram running lion. I have a 3 tb external drive that i use for time machine bakcups and a partition for my itunes library. When I want to watch a movie I connect the external hard drive to my macbook, open itunes and airplay it to my apple tv. However, this solution is not optimal because I lose the use of my macbook when it has to be connected via usb to my hard drive.
    What I want to do is be able to watch a movie on my apple tv via my external hard drive wirelessly.
    I realize that hooking up an airport extreme to a harddrive for time capsule purposes is not supported and thats fine.
    However, will this work for the purpose of airplaying itunes library to apple tv.
    Also would this work with most other wireless routers that support external hard drives? Not asking for specifics here, because i know no one can know every device. But is there any technical problem that would prevent it.
    Thanks

    Yea I'm just going to wait for a solution I like better. The easiest way would be for apple to have some kind of itunes server software. Theres no reason that my computer running itunes shouldn't be able to communicate with with hard drive wirelessly just as it would with a usb cable. Kind of like wireless itunes synching with my iphone.
    I don't want to use Itunes match because music is not my concern. It is the 1,000 movies that I want to watch on apple tv without tying up my laptop.
    Thanks anyway

  • XP sp3 cannot see usb hard drive connected to airport extreme 802.11n

    I have a sata drive that the airport utility recognizes. I attempted to follow the instructions from post HT1331 but no luck yet. I also reformatted the drive from ntfs to fat32 using vista but with the same result.
    I found another post while writing this one which solved my problem. It turns out how I formatted the drive wasn't usable by AEBS.
    Connecting Large USB Hard Drives to Airport Extreme
    I needed to format the drive using the instructions found below.
    http://www.ridgecrop.demon.co.uk/index.htm?fat32format.htm
    After doing this and plugging in the drive I was able to use the drive intended. Since I had started the post I figured I would list the solution.
    Cheers!

    I don't think two problem are related. Now, for PC, try to disable the firewall software if you ave one. Some firewall can block it, like for ex PC Tools firewall, or ZonaAlarm. Some of them you can configure to work with disk agent.

  • Access external hard drive connected to Airport Extreme USB via Windows & Mac

    I have an Airport Extreme and I would like to connect an external hard drive to it via USB so that I can backup pictures, music, documents etc. I need to be able to see the external hard drive from my windows PC. I eventually will be buying a Mac so I would like to be able to also get to my pictures and documents via the MAC as well.
    I currenlty have an iPhone, iPad and Apple TV so getting to the external drive from these devices would be a huge bonus also if that is possible.
    I recently bought an ioSafe Solo External Hard Drive and I had to return it because it was only formatted for the PC. When I plugged it into my Airport Extreme, I could see the drive via the Airport Disk Utility but I could not see it from my PC and I could not map a drive to it. When I contacted ioSafe support, they said that what I was trying to do was not possible since I did not have a MAC available to me to reformat the drive.
    I hope that I am not trying to accomplish the impossible because I will always need to live in a MAC/PC world.
    Any help would be greatly appreciated. Thank you for your time!

    You must know people with Macs.. it is 2min work to plug a USB drive into a Mac Laptop and format it Mac OS extended with a quick format.. And that is better IMHO than buying a utility or buying a pre-formatted drive which are often more expensive for no very good or obvious reason.
    Another option is a Linux boot disk.. Linux distributions have very similar command line tools to the Mac OS. (some are identical) and HFS+ has been available for ages in Linux.

Maybe you are looking for

  • Error handling in Workflow rules to determine agents.

    Hi there, I have a rule, if it fails. I need to send a SAP mail. Or skip that particular user decision step... Please.let me know what ahould be done for this. Thanks, Sukumar.

  • What sensor should be used to measure speed of motor

    Hi, I am using NI PCI-6624 to control the speed of dc motor. I have used "PWM-Counter Output.vi" example to generate PWM pulses to control the input power of motor. I am using "counter output" and "analog input" terminals of PCI-6624. Counter output

  • GW Migration

    Can I use the GW migration tool to migrate a GW 7.0.3 system to a Windows 2003 server? I'm reading that it is used to migrate to a Linux platform. If not, is there a utility to do so? Any advice is appreciated? Mike

  • Challan Material is Different from Material Document Message No. : 8I 572..

    Dear All, Good afternoon. In my company, after version upgrade from ECC5.0 to ECC6.0, facing one peculiar issue i.e in MIGO for subcontract order : When I enter challan number for reference in pop-up, We are getting the below error "Challan Material

  • Updating status of multiple records after saving the form

    Hi all I have a tabular form It has a column status (new,good ,very good ,excellent are the list options) The user goes and modifies a number of records on the detail block and saves the records what i want to do is that when the user clicks the save