Can a single ACS appliance be integrated with a diff OU in the AD (maybe with a diff IP address range).

Hello Everyone,
Can a single ACS appliance be integrated with a diff OU in the AD (maybe with a diff IP address range). If yes, how?
Thanks,
Rishi

Rishi,
Are you looking to leverage certain group in AD to be assigned to a specific subnet? If yes, then this can be done through dynamic vlan assignment.
Thanks,
Tarik Admani

Similar Messages

Can i set up my iPad and iPod to use iMessage between the two devices with the same Apple ID?

Can i set up my iPad and iPod to use iMessage between the two devices with the same Apple ID? SO i could iMessage if out from my iPod to my iPad at home to be viewed by a family member?

Look into using Apple Configurator. It's the easiest way to "reimage" and Manage iPads that I know of right now.
http://itunes.apple.com/us/app/apple-configurator/id434433123?mt=12
Also, look into using the Educational Volume Purchase Program, if you have not already done so.
http://www.apple.com/education/volume-purchase-program/

I reset all the settings last night, now I cant get any icons up, plus I'm on a local computer that cant download itunes, anyone know how i can get my screen back to normal? All it shows is the itunes sybol with the usb cord connecting to it.

I reset all the settings last night, now I cant get any icons up, plus I'm on a local computer that cant download itunes, anyone know how i can get my screen back to normal? All it shows is the itunes sybol with the usb cord connecting to it.

Your only option at this point is to connect the device to a computer running iTunes so you can restore it.
B-rock

Can not access a website but everyone else is doing well and the old computer with the same internet coming in on that side.

Can not access a website but everyone else is doing well and the old computer with the same internet coming in on that side. side is www.miun.se

You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make a note of those passwords and bookmarks.
You can't recover from this 'forget' unless you have a backup of the involved files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

Thanks - I guess it is like there were two of me!
I bought the iPhone first and it seemed natural to link it to the (work) e-mail address which was in constant use. The iMac for home use came next and it seemed natural to use my home e-mail address, particularly as I knew by then that I would lose the work address after my imminent retirement. The same logic went for the recent puchase of the MacAir. I am not sure what happened with the iPad (also a recent purchase) - iTunes seemed to puch me towards the same ID as the iPhone.
It is not a huge problem - just makes my persona look schizoid! Otherwise very happy with everything Apple.

My MacBook uses Mac OS X Version 10.6.8. I am unable to access some websites, such as Facebllk, Gooogle, etc, but I can access other websites such as MSN, Amazon. I have emptied the Safari cache with no change. Appreciate any help.

My MacBook uses Mac OS X Version 10.6.8. I am unable to access some websites, such as Facebook and Google, but I can access other sites such as MSN and Amazon. I have emptied the Safari cache with no change. Appreciate any help in solving this problem.

My MacBook uses Mac OS X Version 10.6.8. I am unable to access some websites, such as Facebook and Google, but I can access other sites such as MSN and Amazon. I have emptied the Safari cache with no change. Appreciate any help in solving this problem.

I can not sync my iCal in my Mac Book Pro with other iOS5 Devices. The server responded with "507" to operation CalDAVWriteEntityQueueableOperation.

The iCal in my Mac Book Pro does not seem to sync / push in iCloud. I can not synchronize the iCal in my iPad2. A window pops out with the message: The server responded with a "507" to operation CalDAVWriteEntityQueueableOperation.

That may not be what you want, but it's what's going to happen if you sync it to your Mac. You are trying to sync media to your phone from an iTunes library other than the one it is set up to sync with.
Transfer the data from the computer you have been syncing with to the new one, then set up a new sync relationship.

Audio sync problems with greenscreen I have replaced the camera audio with my zoom recorder audio and it is in sync. When I apply greenscreen the audio goes out of sync. What am i doing wrong?? So frustrating..Thanks, Peter

I have replaced the DSLR audio with audio from my Marantz recorder and it is in sync with the dialogue. I apply green screen and the audio goes out of sync. Cannot seem to make it work. what am I doing wrong? Thanks, Peter

Thanks for the reply. I don't have time for this. is it time to switch to a different editor?

Cisco Secure ACS Appliance - Failed to edit ....Reason: The Host no longer exists.

Hi Team ,
I have 2 Appliance from which I am not able to remove a particuler device from Network Device Group .
When I try to remove the the device following error is thrown
Failed to edit INMUM-VPE-T1-3rdFloor-3750-S.... Reason: The Host no longer exists.
Appliance is running on Version : Cisco Secure ACS4.2.0.124
Could any one come across Such issues . any one knows the solution .
Regards
Vineeth

Hello Vineeth
yes, you are can do through GUI.
On GUI :
1. ACS gui > network configuration > click "search" and click "search" again.
2. Complete list of all network device will appear. On top, you will see an option to "download".
Download the complete file.
Let me know if it helps.
thanks
Devashree Saha

TS4337 Ever since I updated the OSX (V 10.9.1) iCal can't be used, when I open it a message pops saying: The server responded with an error, couldn't move calendars to iCloud because an error occurred. I turned off icloud and the same keeps happening.

Mail is not functioning right, as well as iWorks. And everything started to break down since I updated the OS please help!

To check the local network for some of the common configuration problems, launch Terminal.app and issue the following diagnostic command:
sudo changeip -checkhostname
That'll report some local configuration information and then either no errors detected and no changes required, or it'll point to whatever configuration errors or issues it might detect. That doesn't catch everything, but it catches the common errors.
FWIW, 192.168.0.0/24 and 192.168.1.0/24 are poor choices for the local network, as VPNs are based on IP routing and IP routing gets tangled when the same subnet is used on both ends of the VPN. 192.168.0.0/24 and 192.168.1.0/24 are near ubiquitous in home networks and coffee shops.

11-04-2008, 08:55 AM Hello all, Hoping someone can offer me some help. My macbook won't boot past the grey screen with the apple logo with the spinning disc. I've left it for around an hour and nothing happens.

pls help me need help badlypls help me, need really bad

Look at this support article:
http://support.apple.com/kb/TS2570
Ciao.

Problem with Call_Form to Return to the Previous Screen with Saved Results

Hello All,
I have two forms (e.g. Form A & Form B) both forms have options to call one another with a Push Button included in the form. Our users want to be able to return to Form B from Form A with a previous search result and parameters saved in Form B. I was able to use the following code to make this happen:
1. In Form B, I added the following code in the When-Button-Pressed Trigger for the 'PB_Return_2_Form_A' item:
CALL_FORM('Form_A', HIDE,NO_REPLACE, NO_QUERY_ONLY);
2. In Form A, I used the following code in the When-Button-Pressed Trigger for the 'PB_Return_2_Form_B' item:
EXIT_FORM;
The above code works beautifully when I enter form B first and search the database with all the required parameters entered, the parameters and search results were displayed upon return from Form A. But the problem is when I enter Form A first, the form exits abruptly. I tried to use pre-condition testing in Form A such as the following code:
IF :GLOBAL.DWR01_First_Call = 'Y' THEN
NEW_FORM('DWR_SEL', NO_ROLLBACK);
:GLOBAL.DWR01_First_Call := 'N';
ELSE
EXIT_FORM;
END IF;
(BTW, I initialize the :GLOBAL.DWR01_First_Call variable to 'Y' in the 'When-New-Form-Instance' Triggers in the form level.) But the above code does not work. For some reason this :GLOBAL.DWR01_First_Call = 'Y' condition always gets executed such that the working part of code is by-passed.
If any of you can help me on resolving my problem asap, I would really appreciate it.
Thanks to you all in advance,
Jinlan
--

Thanks all for the information and help. I have read through the information provided in the links above, and modified the global variable accordingly in both the calling and called forms, but all tries failed. From my failed attempts, I realize that my current design might not work because the value of GLOBAL.DWR01_First_Call seems to be 'Y' each time when Form A is called as such the 'EXIT_FORM' statement in the ELSE condition will never be executed. This intrigues me with the following questions:
I. How do I use the debug in Forms 6i to step thru the values of a variable at a given execution state? (Although, I am pretty certain that the :GLOBAL.DWR01_First_Call value is always going to be a 'Y' each time when Form A is called, it would be nice if I could see it myself and not just guessing. :) )
II. By now, I am pretty sure my current design may not work... How do I make my code to work for the situation I described above? For your convenience, I restate my situation again below and hopefully it will clarify my needs:
Both Form A and Form B have options to call one another with a Push Button included in each form. Our users want to be able to return to Form B from Form A with a previous search result and parameters saved in Form B, and the following code works:
1. In Form B, I added the following code in the When-Button-Pressed Trigger for the 'PB_Return_2_Form_A' item:
CALL_FORM('Form_A', HIDE,NO_REPLACE, NO_QUERY_ONLY);
2. In Form A, I used the following code in the When-Button-Pressed Trigger for the 'PB_Return_2_Form_B' item:
EXIT_FORM;
But, the above code kicks the user out of the application completely if the user enter Form A first and then select Form B by pressing the 'PB_Return_2_Form_B' push button(BTW, this access mechanism is most commonly used by our users). So, how do I allow users to enter Form A first and allow them to call Form B and proceed with entering parameters and search query, without exiting the form.
Any and all the help you can provide on this will be greatly appreciated.
Thanks millions in advance,
Jinlan Tomasic
[email protected]
1(907)458-6899

Using Windows 7 Backup (with 3.0 TB drive) the backup fails with an error code of (0x8078002A)

I have tried for over a month to back up my laptop to a new external 3TB drive (DWC130). I have reformatted it, changed my windows backup settings, and read as much as I could about this issue and still have had no success. I have reformatted the drive; I have allowed Windows 7 (64-bit) to back up with its own settings; I have read forums all over and there has been no answer provided that solved this issue. I am hoping someone from Toshiba or this form can provide some direction.

Error code 0x8100002F and or error code 0x80070002 when you back up files in Windows 7
-Jerry

How to use the Camera kit with ipad, How to use the Camera kit with ipad

I bought the iPad CAmera Connection kit the other day and attempt to connect with iPad to upload/download photos from SD card. How? Clueless?

You can only copy from SD Card/Camera to iPad. It won't work from iPad to SD Card.
http://i1224.photobucket.com/albums/ee374/Diavonex/1d0cb10d.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/e8058ab4.jpg

Has anyone come up with a solution on why the red circle with question mark inside appears.

Has a solution been brought

Could the problem be that you're trying to make a template that includes assignments and placeholder frames? Because that won't work ... sorry, would be nice if it could.
You will get a missing assignment icon if you move the InDesign file, duplicate it, or rename it via a Save As. That's because assignments are actually attributes of the original file -- they are NOT linked -- and they don't stick with it when the original file is modified (other than normal "Save's"). The time to create assignments is when the live "final" file (even if it's filled with empty frames) has been created for that specific publication/issue, and it will not be moved or renamed during the production cycle.
So if you're doing what I'm guessing ... if you start w/an InDesign file, create assignments and assign empty text frames, and save that as a template ... then you will always end up with "missing" assignments. That's because a template file, when double-clicked, creates an Untitled copy of itself.
"I am getting the missing link for the assignments after they are finished." If an assignment -- an ICMA file, not the linked stories, the ICML files -- shows the red "missing" icons in the assignments panel, the only solution is to recreate them. They are not linked to the layout so there is nothing to relink.
The fix is to select each missign Assignment in the Assignments panel and choose Change Location. It's a bizarre name for the actual function which is to "recreate the Assignment." Be careful of the linked ICML files that go along with that layout (and those assignments).
You will also run into problems if you try to re-use the same linked ICML files for multiple issues. Best to start with a "normal" INDD file, then export Assignments/linked stories for that one issue. When you're done, unlink all the stories and delete the Assignments, turning it back into a normal INDD file. That normal file is safe to duplicate and use as a starting point for the next issue.
AM

Can a single ACS appliance be integrated with a diff OU in the AD (maybe with a diff IP address range).

Similar Messages

Maybe you are looking for