Can Aironet 1300 Series configure as Bridges and AP in the same time?

I need to configure another Briding End point to be Access point too. Is it possible?

Yes, 1300 supports a feature called Link Role flexibility which enables each radio in this bridge to act in different role.

Similar Messages

Can I watch video through my iPhone and TV at the same time?

Can I watch video through my iPhone and TV at the same time while using the Apple composite video cables? I am planning a trip in my car and would like to play videos for my kids through their video screen while my wife watches on the iphone from the passenger seat. I didn't want to spend $50 to find out it doesn't work.
Thanks in advance!

It doesn't work that way, sorry. When video out is being utilized, only the movie artwork (the cover or image) is displayed, and the actual movie is not displayed on the iPhone's screen.

Can't connect to internet via router and airtunes at the same time

Can anyone help me connect to the internet via my BT Homehub, and play AirTunes through my Airport base station at the same time? I can only seem to do one at a time.
I've seen the articles about setting up clients etc but don't get it. Using the Airport Assistant utilty doesn't really help either. Would like someone to go through the steps I need to follow.
Thanks

To set up AirTunes on the AirPort Express Base Station (AX), connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, use the AirPort Admin Utility to check these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- Wireless Mode: Join an Existing Wireless Network (Wireless Client)
- Wireless Network: <select your BT Homehub wireless network>
Music tab
- Enable AirTunes on this base station (checked)
- Enable AirTunes over the Ethernet port (optional)
- iTunes Speaker Name: <whatever you wish>
- iTunes Speaker Password (optional)
In iTunes:
iTunes > Preferences... > Advanced > General
- Look for remote speakers connected with AirTunes (checked)

On my PC, can I have both indesign 5.5 and 6 at the same time?

I like working in indesign 5.5 for one magazine but i need indesign 6 for another. Can i install indesign 6 and run them both at the same time?
Do i need the full version of both or is the upgrade to 6 enough to do this?

The upgrade and non-upgrade versions differ only in price and the installer looking for a qualified upgrade product. The programs themselves are the same.
As we said before, you will have no problem with both versions installed (I run back to CS3 here). If you purchase an upgrade, though, you must choose the right one. If CS5.5 is a Suite package you cannot use an InDesign-only upgrade.

Can I run two midi controllers (keyboard and pad) at the same time?

ie.....can I play keyboard and use a pad for an effect of some sort - creating two instraments at the same time. I want to play say, piano on one instrament w/ a keyboard and at the same time play a synth effect on a trigger pad with another instrament (es 2)????????

Yes.
set 2 instruments to different midi channels.set the keyboard and pad to match.
record enable both tracks in arrange.
check: file/song settings/recording/auto demix by channel if multi-track recording
this will allow you to record them both.

Creative Cloud: Can I have it on a PC and Apple at the same time?

I have a prescription for Creative Cloud on my PC. I bought an Apple Mac Pro. Can I have Creative Cloud on both computers or must I choose one? If so I want the new Apple. How do I make this change?

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each
-Both subscriptions MAY be in use at the same time https://forums.adobe.com/thread/1683787

Can I use DisplayPort (for a monitor) and Thunderbolt at the same time?

Hi all,
I have a mid 2011 MacBook Air 13 inch with a single Thunderbolt port.
I have the Apple Mini DisplayPort to Dual-Link DVI Adapter cable which I am able to use to run a Dell 24 inch monitor - this cable connects to both the DisplayPort/Thunderbolt port and also a USB port on the Air.
I want to be able to run this Dell monitor, and also run a Thunderbolt hard drive - one with 2 Thunderbolt ports.
Is this possible?
Can I connect the DisplayPort part of the cable to the pass-through Thunderbolt port on the hard drive, and then connect the hard drive to the Thunderbolt port on the Air?
Thanks, for any advice :-)
I would like to buy the Apple Thunderbolt display (which would solve this issue), but I suspect it will may refreshed soon. So I don't intend to get one until then.
Thanks :-)

OK,
I have tried this myself and it does work.
Macbook Air - connect to Seagate GoFlex Thunderbolt (Using Thunderbolt cable)
Seagate Goflex Thunderbolt passthrough to a Dell 24 Inch monitor (using Apple Mini DisplayPort to Dual-Link DVI Adapter cable).
Both the Seagate GoFlex and the Dell 24 inch monitor work :-)
I am happy with this result, so I won't need to get a Thunderbolt moniter just yet - I will wait for Gen 2 :-)

Can I watch videos on my iPad and browse at the same time?

I want to watch a Ted talk that I downloaded and browse the internet, but everytime I try to leave iTunes it automatically shuts off what I'm watching. Can this thing seriously not do more than one thing at once? It seems odd. Same thing happens, if I'm watching somethign on YouTube and try to browse the internet in a new window whatever is on YouTube always shuts off.

Yes, that's the way it works. Multi-tasking doesn't extend to separate windows, there is no Desktop for them to be displayed on, no file handling system to keep track of them, etc., etc.
TED has their own app, by the way .... no need to download via iTunes. Still just one thing at a time, so just sayin ....

Bulk load users into Directory and Messaging at the same time

Can I bulk load users into Directory and Messaging at the same
time?
<P>
Yes, but you are not really loading users into the Messaging
Server. The Directory Server contains all kinds of information about
users, including information about their email. So if you want to
load user information into the Directory Server, including the users'
messaging infromation, you must install the Directory server first.
Configure the directory server. Then install the Messaging Server.
Then you can load users into both by loading an LDIF file with the
user information.

Hi,
You can check the documentation: Multiple Copies of RMAN Backups ;-)
When backing up datafiles, archived redo log files, server parameter files and control files into backup pieces, RMAN can duplex the backup set, producing up to four identical copies of each backup piece in the backup set on different backup destinations with one BACKUP command. (Note that duplexing is not supported for backup operations that produce image copies.)
There are three ways to specify duplexing of backup sets when using the BACKUP command:
Specify a default level of duplexing with CONFIGURE... BACKUP COPIESAll backup commands that back up data into backup sets will be affected if you use this option, unless you specify different duplexing options for a command using SET BACKUP COPIES or provide a COPIES option for the BACKUP command.
Use SET BACKUP COPIES in a RUN block All commands in the RUN block will be affected, overriding any CONFIGURE... BACKUPCOPIES setting, except those where you provide a COPIES option as part of the BACKUP command.
Provide a COPIES option to the BACKUP command For this specific BACKUP command, files will be duplexed to produce the number of copies you specify.
Cheers
Legatti

Use one external harddrive on both pc and mac at the same time

i bought an iomega external harddrive today
can i use it on both mac and pc at the same times?
for ex:
when i plug in both computer
i could able to read and write on the hdd on both computer
since i format it into 4 partitions (2 journal and 2 doc)
so i wish i can use them separately in 2 computers

Hi Jerry_L and welocme to Discussions,
using such USB or Firewire connected external harddrives with two computers at the same time is usually not recommended by the manufacturer.
Doing so might lead to data-loss and the like.
Check with the manual of that harddisk to verify.
Using it with one computer at a time with your partitioning should be doable.
Regards
Stefan

My SB Audigy 2 card can't use headset and musicamplifier at the same time

Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
please help, thx.
Michael

If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
Another option:
Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
--> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
= You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
.jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

Recording Audio and Midi at the same time in Logic 7 Express Can it be done

I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

Can we use both INSERT and UPDATE at the same time in JDBC Receiver

Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,

Hi ,
          If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
    Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
    There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.

Can Aironet 1300 Series configure as Bridges and AP in the same time?

Similar Messages

Maybe you are looking for