Can any one help about visit planning

Hi SAP Gurus,
               can any one knows about visit planning in sapcrm and how we will integrate and without crm also they can plan their visits in ms-outlook
Regards,
reddy

as a starter use the following link:http://help.sap.com/saphelp_crm50/helpdata/en/48/7b044017355c0ce10000000a1550b0/frameset.htm
this will give a good overview of the functionality.
hope this helps
RH

Similar Messages

  • Can any one explain about the SAP Testing process in Implementation Project

    Can any one explain about the SAP Testing process to be carried out by BW Consultant in an Implementation Project which is in Testing Phase..

    hi bharat,
    Two types of testing is possible in bw
    unit testing
    integration testing
    Integration testing - It is the phase of software testing in which individual software modules are combined and tested as a group. It follows unit testing and precedes system testing.
    Integration testing takes as its input modules that have been checked out by unit testing, groups them in larger aggregates, applies tests defined in an Integration test plan to those aggregates, and delivers as its output the integrated system ready for system testing.
    Unit testing - One part or the whole part of transfer rules , update rules, etc..
    Integration testing - The whole data flow cycle to be tested
    This link will give u detailed description
    http://en.wikipedia.org/wiki/Software_testing
    Stress testing in BI..
    /people/mike.curl/blog/2006/12/05/how-to-stress-test-bw-the-easy-way
    REFER THIS REG CATT
    http://help.sap.com/saphelp_erp2005/helpdata/en/d7/e21221408e11d1896b0000e8322d00/frameset.htm
    Check this doc on Unit Testing
    unit testing
    Look at the threads below :
    Testing Methods in BW
    Unit Testing in BW
    How to do testing in BW
    Hi...BW testing
    Re: Hi...BW testing
    Hi...BW testing
    Pls refer following links...
    http://help.sap.com/saphelp_nw04/helpdata/en/d7/e210c8408e11d1896b0000e8322d00/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/3c/aba235413911d1893d0000e8323c4f/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2123b408e11d1896b0000e8322d00/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/721d6a73-0901-0010-47b3-9756a0a7ff51
    https://service.sap.com/upgrade-bw
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7dc0cc90-0201-0010-4fa7-d557f2bd65ef .
    https://websmp204.sap-ag.de/~sapdownload/011000358700009385902004E
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/67acb63d-0401-0010-b685-b1b87dd78892
    Hope it helps you!
    ****Assign Points If Helpful****
    Regards,
    yunus

  • HT204023 hi there can any one help me i have a iphone 5 but my mobile internet not working but i can connect to my wifi no bother

    hi there can any one help me i have a iphone 5 but my mobile data is not working but a can connect to my wifi no bother

    talk to your carrier about the data subscription and possible settings changes to their apn than

  • Hello i am having a problem in my 4s that it dosent run any USSD code it goes on calling , can any one help me i am mack from Karachi Pakistan

    Hello i am having a problem in my 4s that it dosent run any USSD code it goes on calling , can any one help me i am maqsood  from Karachi Pakistan

    Ok so I've done what you said and this is what it's come back ....
    I don't know that these are the errors , but they're the things which don't look right ...
    Throughout the shut down there is a recurring line ;
    It says ;
    Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
    Then there are 2 more which I think are related ;
    Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
    Then the same with fseventd 48 and diskarbitrationd 13
    Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
    Then the last process says "about to call: reboot (RB_AUTOBOOT).
    Continuing...
    And stops ...
    Hope this means something to you ... Thanks again for your help so far :-)

  • Can not down load new i tunes up date says old bonjour can not be removed seek advice i tunes is nothing but a pain can any one help

    can not down load i tunes up date because old bonjour can not be removed can any one help
    because apple must know about this problem but are not help full

    I would try uninstalling all of the Apple software and then reinstalling it using these instructions:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    You migh want to try doing this when in safe mode.

  • Can any one help? "Windows cannot repair this computer automatically."

    I have a laptop satellite L455-S5000.
    And when I try and trun on my computer a black screen comes on that says "windows is loading files..."
    and after it loads a window pops up saying "startup repair is checking your computer for problems..."
    and after that gets done it says "Windows cannot repair this computer automatically" so I click "Send information about this problem (recommended)" and then I click "finish" then it shuts down. when I try turning it back on it does the same thing over. Please can any one help me fix it? Im really clueless about computers and I have know Idea what is wrong with it, or how to even go about fixing it. thanks.

    _Ashley_
    Turn the laptop off, hold down F8, turn the laptop on and let go of F8 when you see the Advanced Boot Options.
    In here, choose Repair Your Computer then press enter, follow the prompts, choose System Restore and restore your laptop to a point before the problems started.
    If the laptop cant get you there, a system recovery starts the laptop from it's factory state but you loose your programs and files doing that. Holding the "0" beside "9" while you turn the laptop on boots the laptop from its recovery partition if you accept data loss.

  • Hello everyone, can any one help regarding activation

    i have got iphone 4s, i factory unlocked my iphone 4s, but now when ever i put any sim apart from the orignal SIM,it goes on to activation required, then it says Sim not valid , though i get the signal bars at the top, and carrier in SETTINGS->GENERAL->ABOUT-> also changed from orignal carrier to new. I dont know what to do, Can any one help me, i have paid for the factory unlocking to a guy and now that guy is not picking my phone, i dont know what to do.

    Ask him... he is not the carrier. ONLY the carrier can authorize unlocking it. There is a process that has to be followed involving restoring the phone after the unlock has been approved. If the phone was hacked at any time prior to requesting a legitimate unlock, it may not be usable at all after attempting to have it legitimately unlocked.

  • Can any one help in creating a sales order

    Can any one help in creating a sales order  using va01 transaction ?
    I have a reference sales order number .
    Reason why I need this sales order :- I need it to check my task.
    The task was to generate a routine using VOFM ,create a Ztable with fields:sales area and condition types .The routine is activated if the combination of condition types and sales area exists in the Ztable.
    Can anyone tell me what is relationship between the three :Ztable ,routine and sales order?

    VA01 - Create Sales Order
    Use these steps to create a sales (or project) order for the purpose of billing a cost reimbursable project. The sales order is the document that links the sponsor to the project.
    Get started (SAP menu path, fast path)
    Create sales order: initial screen
    Create project order: overview
    Create Variant to simplify VA01 data entry
    1. Get Started
    SAP menu path: (not in role ZSBM)
    SAP Fast Path
    At the Command Line, enter: /nVA01
    2. Create Sales Order: initial screen
    Order Type: (Use default = "ZPS" for Project Order)
    Organizational data: (Use defaults)
    Sales organization ("1000" for Sponsored Billing)
    Distribution channel ("10" for MIT Distribution Channel)
    Division ("10" for MIT Division)
    or ENTER
    The Create Project: Overview screen displays, as shown below.
    3. Create Project Order: overview
    Sold-to party (type in 10-digit sponsor ID number, as shown below)
    In Material field of first line item: (type PROJECT to identify as sales order for sponsor billing, as shown below)
    (or ENTER)
    Result: A field for entering the WBS element displays, as shown below.
    WBS element (type in 7-digit WBS number for project)
    Click on  or F11 to SAVE.
    A message states that Project order XXXX has been saved.
    4. Create Variant to simplify VA01 data entry
    Run VA01 as described in step 1, so that the "Create Project Order: overview" screen displays (shown at start of step 3).
    On Item Overview tab, scroll to right to find WBS element column (about half way across).
    Click on column title, WBS Element; hold and drag all the way to left; then drop next to Material column, as shown below.
    Click on tiny (multicolored) icon  above vertical scroll bar (shown above, to far right) to display Table Settings dialogue box, shown below.
    Under Maintain Variants, type name for Variant, for example "my_settings" (leaving Use as standard setting checked); click on Create; then click on Save button to close dialogue box.
    From now on, the WBS element column displays next to Material column when you run VA01.
    Check the path as
    http://web.mit.edu/cao/www/SB2002/CR/VA01.htm

  • HT204053 i got this massege on my iphone the maximum number of free accounts have been activated on this iphone can any one help?

    i got this massege on my iphone the maximum number of free accounts have been activated on this iphone can any one help?

    This restriction has no relation to creating free accounts, it means you may not sign in to another free account, on that iDevice because the serial number of the device (on apple's server) has their limit of free accounts associated to it. the only way around this is to use one of the three free accounts on the device which the server has associated, OR have apple reset the account/remove the restriction for that serial number...This has been posted in dozens of discussions, but they continue to ingnore the problem, what's worse is the telephone support is RUDE about it if you inquire.

  • Can any one help me in fi/sl extraction

    can any one help me in fi/sl extraction.i am not able to get data in cube please send me screen cut of fi/sl extraction.
    Edited by: chaitanya pissay on Apr 11, 2008 7:26 AM

    Hi Chaitanya,
    Check here........
    FI-SL Extraction
    FI /SL extraction
    http://help.sap.com/saphelp_nw70/helpdata/EN/04/e04c40cc538437e10000000a155106/frameset.htm
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FISL/FISL.pdf
    Fi_SL data model
    http://help.sap.com/saphelp_bw32/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
    Regards,
    Vijay.

  • Can any one help me in this code

    Hi all,
    I have created a selection screen and my aim is to display some fields or some block dynamically by choosing some radio button is it possible.
    can any one help me in this.
    REPORT  z_g_test.
    TABLES: spfli,sbook,sscrfields.
    SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS:s_carrid FOR spfli-carrid.
    SELECTION-SCREEN END OF BLOCK 1.
    PARAMETERS:rad1 RADIOBUTTON GROUP g1 USER-COMMAND us1,
               rad2 RADIOBUTTON GROUP g1 DEFAULT 'X' .
    SELECTION-SCREEN BEGIN OF SCREEN 001 as subscreen ."WITH FRAME TITLE text-002.
    SELECT-OPTIONS: s_fldate FOR sbook-fldate.
    SELECTION-SCREEN END OF SCREEN 001.
    DATA ok_code LIKE sy-ucomm.
    INITIALIZATION.
    START-OF-SELECTION.
      SELECT * FROM spfli WHERE carrid IN s_carrid.
      ENDSELECT.
    END-OF-SELECTION.
      WRITE:spfli-carrid.
    AT SELECTION-SCREEN.
      CASE sscrfields-ucomm.
          WHEN'US1'.
    *      call screen 001 starting at 55 40.
      ENDCASE.
    Is i am going on the right way
    Regards,
    Lisa.
    Message was edited by: Lisa Roy
    Message was edited by: Lisa Roy
    Message was edited by: Lisa Roy

    This is what I meant. Copy this and try as it is and see if it serves your purpose.
    REPORT ztest1 .
    TABLES: spfli, sscrfields, sbook.
    SELECTION-SCREEN BEGIN OF TABBED BLOCK tabb1 FOR 4 LINES.
    SELECTION-SCREEN TAB (25) tabs1 USER-COMMAND ucomm1
                         DEFAULT SCREEN 001.
    SELECTION-SCREEN TAB (25) tabs2 USER-COMMAND ucomm2
                         DEFAULT SCREEN 002.
    SELECTION-SCREEN END OF BLOCK tabb1.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE abc.
    PARAMETERS: p_date LIKE sy-datum.
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF SCREEN 001 AS SUBSCREEN .
    SELECT-OPTIONS: s_fldate FOR sbook-fldate.
    SELECTION-SCREEN END OF SCREEN 001.
    SELECTION-SCREEN BEGIN OF SCREEN 002 AS SUBSCREEN .
    SELECT-OPTIONS:s_carrid FOR spfli-carrid.
    SELECTION-SCREEN END OF SCREEN 002.
    INITIALIZATION.
      tabs1 = 'Search by flight date'.
      tabs2 = 'Search by flight number'.
      abc   = 'Some other parameters'.
    AT SELECTION-SCREEN OUTPUT.
      CASE sscrfields-ucomm.
        WHEN 'UCOMM1'.
          tabb1-prog = sy-repid.
          tabb1-dynnr   = 001.
          tabb1-activetab = 'TABS1'.
        WHEN 'UCOMM2'.
          tabb1-prog = sy-repid.
          tabb1-dynnr   = 002.
          tabb1-activetab = 'TABS2'.
      ENDCASE.

  • Can any one help me to code a browser

    hi ,
    I am Anil, I am doing an application in java. it needs a browser as IE or Morzilla . i tried to implement the browser using jdic.
    i add jdic.jar files as a external jar file and added it to my project. when i run the program in eclipse it works fine. when i want to create a jar file to my application it shows the follwing error..
    when i click on that jar file , it shows a Java Virtual Machine Launcher dialog box and in that dialog box it shows error Could not Find the main class. Program will exit ..
    this is the error.
    can any one help me to over come the error or any alternative method to implement a browser..

    DarrylBurke wrote:
    Corss poster!
    [http://www.java-forums.org/advanced-java/30298-how-write-job-aggregator-java-j2ee.html]
    dbNot anymore, Fubarable has axed that thread.

  • Hello, every one. Over the last few days I haven't been able to download any app from the app store. can any one help me, please?

    Over the last few days I haven't been able to download any app. can any one help me, please ? thank you.

    Andrea...
    You posted in the "Using Mac App Store" forum but your profile indicates you are using an iPad so that's what I'll try helping you with.
    On the iPad tap Settings > General > Reset > Reset Network Settings
    Then restart the iPad.  Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
    If you still can't download apps, the problem may be your Wi-Fi connection >  iOS: Troubleshooting Wi-Fi networks and connections

  • HT1338 When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

    When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

    jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
    Most of the projectors I have used support a 1024X768 res.
    Youcan also try a pram reset if it still does not detect.
    Leave theproctor connected and powered up, power down the MBP.
    Power back up the MBP and hold the following keys before you hear the start up chime:
    Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times.

  • Safari keeps crashing every time I try to open a link from a different application, i.e. Mail. The trouble report says that some problem occurs with libcooliris.dylib plug-in. Can any one help?

    Safari keeps crashing every time I try to open a link from a different application, i.e. Mail. The trouble report says that some problem occurs with libcooliris.dylib plug-in. Can any one help?
    Thanks!

    Dear Linc,
    Thank you for the advice, John Blanchard1  and Linc Davis
    As suggested in your reference thread I removed "/Library/Printers/hp/PDEs/hpPostScriptPDE.plugin" and the problem has been resolved.
    I am guessing the the plug-in for the hp printers got corrupted and effected every thing, or became unsuitable when I installed an Apple update. I would be most grateful if you can confirm how the problem was coursed so I can understand and learn from this experiance.
    Ash

Maybe you are looking for

  • Dynamic Determination of Target Messge Type (IDoc)

    Hello, we have a IDoc - HTTP scenario. A SYSTAT01 IDoc should be sent back to the sender system setting the status depending on the http response. The basic scenario works fine, however depending on the value of one field there should be either a STA

  • Address Rewriting - Sender and Recipient

    Is there any way to perform address re-writing for BOTH the sender address and the recipient address for all outbound mail? We need to use it in-between two separate mail systems. Or is it just limited to sender for outbound and recipient for inbound

  • USB Flash Drive Eject

    Hi, I recently bought a USB flash drive (Sandisk Cruzer Micro) and i've been having some trouble ejecting it. When i plug it in, it works fine and I can drag files to it. I wait until the progress bar is complete (and then usually a few seconds after

  • Searching field name in sap screen

    Hi, is there any easy way to search for a field name in sap screens, like control+F in ms applications. i am searching for "calc formula" in qs21 screen. how to find the same field in qs21 screen.

  • Cflocation problem, opening new browser tab

    I have a cfform with several submit buttons. The form action is itself and depending on what submit button is pressed a different function from a cfc is invoked and then I'm trying to use cfloaction to launch a new page. When this happens it is openi