Can anyone explain origination/destination on the billing summary?

can anyone explain origination/destination on the billing summary?

The destination of a call made by the cell phone is where billing is based, if you are calling them.
For example, if I call my friend who has a NYC number and she is standing next to me here in GA and I have a MI number, The origination will show Podunk GA, but the destination will still show NYC.
Now if she calls me from GA, on my bill it will Destination, Incoming Call
Whether incoming or outgoing, on the bill, you, the line holder, are always the Origination. Look at the pic below and look at the calls from 8.5. my friend from NYC, visiting Hiram, when calling her shows NYC. Yet when she called me, it is Incoming Call
So basically, you never know WHERE the person on the other end actually is.
Hoped this helps

Similar Messages

Can anyone explain how to post the manual entries in BCS?

Hi All,
Can anyone explain how to post the manual entries in BCS?

Dear,
Depands on posting level.
There is Manual Posting under Consolidation Functions.
Please creat document and task.
Next you add this task for consolidation monitor. There is "Consolidation Monitor " and you choose Hierarchy task and add your task for manul data.
In document you kind in mind: choose manula posting !!!!!!!!!!!!!!!!!!!!! in page tab Propertis under Posting!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.
If you would like to entry in posting level 01 or 10, please choose Local currency and trasaction currency +- group currency.
If you would like to entry in posting level 20 or 30, please choose Group currency.
In SEM_BCS are posting level is very important.
Regards,
anka

My G4 desktop won't cold start. I have to plug in to the outlet for about 15 minutes every time. Can anyone explain why?

My G4 desktop won't cold start. I have to plug in to the outlet for about 15 minutes every time. Can anyone explain why? Otherwise, the desktop runs fine.
The battery is new, and I zapped the little button on the main board once. I've noticed that the power supply plug is a little longer than the usual one for G4, and the AGP slot has an extra slot, which is black and about half inch long.

Hi Ursula,
the AGP slot has an extra slot, which is black and about half inch long.
I believe that is for ADC Monitor power if you had one, or a card with ADC, like the little tab on this one...
I think your startup problem is bad capacitors in the power supply or on the logic board, and the need to bleed off their charge before they work right to start.

Can anyone explain this? ORA-01722

Hi all,
Can anyone understand this?
I have 3 database servers both running on windows 2000 advanced server, they're used by the development team. Also we have our production database.
The 3 databases are cloned from the production, so database configuration parameters are all equal. Today I've received a query from the development team to run on the production, the query is just simple like this:
SELECT *
FROM x
WHERE x.field_v = 177762522
I get this error
ORA-01722: invalid number
this is a hudge table, and the fiedl_v is a varchar2(9) type.
The worst thing is that on the others 3 databases this query returns results, except on the production.
So, can anyone explain me why does the implicit (char to number) conversion occours on the development databases , and fails on the production? What are the main reasons that can influence datatype conversion like this one?
Both databases have the 9.0.6 patch.
The 3 development BD's are totally cloned from the production.
Thanks.

William:
There is no guarantee on the order of evaluation of the predicates. Even with your isnum function, the invalid number could arise. The only safe way is to compare strings to strings as in your first example.
To make the isnum "safe", you would need something more like:
SELECT *
FROM (SELECT *
      FROM x
      WHERE isnum(x.field_v) = 'Y' and
            ROWNUM > 0)
WHERE x.field_v = 177762522;The ROWNUM > 0 predicate in the in-line view will prevent predicate pushing and guarantee that the isnum condition is evaluated first.
John

I keep getting an error message when downloading a new app which states " Zinio and 5 other apps cannot be purchased at this time" and then it let's me purchase the app that I was looking at? Can anyone explain that?

I keep getting an error message when downloading a new app which states " Zinio and 5 other apps cannot be purchased at this time" and then it let's me purchase the app that I was looking at? Can anyone explain that?

apple_master New Delhi, India
This solved my questionRe: Unable to Purchase
Apr 16, 2012 10:22 PM (in response to eight4seven)
This worked for someone
I had this problem for about six weeks. I was following this forum but was too unsure of what might happen to try the fixes that were suggested.
About two weeks ago I decided to delete the downloads.28.sqlitedb file (usingDiskAid(a free program), on a PC running Windows 7). The original downloads.28.sqlitedb was 936 KB. The new one that the system created is 80 Kb., and has stayed at about that size. After about four days I also deleted all the other contents of the Download folder. Ten days later and still no more problems. Downloads are much quicker, nothing greys-out (as was happening frequently before).
Everything has worked well since with no more error messages.
I am using an iPod 4G, iOS 5.1 (originally iOS 5.0). I do not have a manifest file, and as far as I know, have not had one. DiskAid can search the whole "hard drive" on the iPod.
Deleting downloads.28.sqlitedb and the contents of Downloads worked for me.

I recently installed Acrobat Pro X on my Mac. I initially accepted the terms of agreement, but then every few seconds the same prompted window for the terms of agreement keeps popping up. Can anyone explain why this is happening, and how to resolve?

I recently installed Acrobat Pro X on my Mac. I initially accepted the terms of agreement, but then every few seconds the same prompted window for the terms of agreement keeps popping up. Can anyone explain why this is happening, and how to resolve?

Have you tried reinstalling the original drive? Same symptoms with it?

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
BTW the ipod is an ipod video not classic if that makes any difference.
Thanks

Can anyone explain what the other section section in the HDD usage description is for ? I recently used iphoto to send a mail and this "other "section inrease the usage by about 1GB....any ideas why ?

Can anyone explain what the "other" (yellow colour) section in the HDD usage description is for and what it does.It is under the about this mac section and storage option?
I recently used iphoto to send mail with photos attached and this "other" section increased by about 1GB. The mail size was around 900KB.....any ideas ?

Shurig wrote:
Thanks gor replying,,,this is my first time on this site.
Any idea why the "other" continues to increase. I have just got got my mac so no new apps installed yet only been using it for mail and web browsing. I tried the iphoto mail last night and noticed the the "other" section had increased by 1GB which I thought was rather larger. Do you know what this setion actually does ?
Also do you know if it is possible to delete the iphoto emails.
All of your 'stuff' that is not Music Movies Apps Backups or Photos is in Other, that means all your emails, all your files etc, why don't you just leave well enough alone, this is not windows and doesn't need tinkering with,

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Can anyone explain the difference between these 2 versions?

I don't understand why Version 2 works and Version 1 does
not. Both are on the main timeline, however Version 2 nests one
clip inside the other. They both display correctly, however
mouse-dragging only works on the Version 2. The events don't get
fired for Version 1. Can anyone explain what's up?
Version 1:
this.createEmptyMovieClip("thisClip",getNextHighestDepth());
thisClip.loadMovie("man.swf");
thisClip.onPress = image_press;
thisClip.onRelease = image_release;
Version 2:
this.createEmptyMovieClip("thisClip",getNextHighestDepth());
thisClip.createEmptyMovieClip("man",
thisClip.getNextHighestDepth());
thisClip
.man.loadMovie("man.swf");
thisClip.onPress = image_press;
thisClip.onRelease = image_release;
The handlers are defined as simple calls to
startDrag/stopDrag:
function image_press() {
this.startDrag(false);
trace("man press");
function image_release() {
this.stopDrag();
trace("man release");

handlers applied to a movieclip (like your thisClip.onPress
handler) is removed when that movieclip is the target of a
loadMovie() statement. when loading is complete you can assign an
onPress handler that functions as you expect. or you can use
version 2 to target the child of a movieclip and assign handlers to
the parent.

Can anyone explain the process of gifting an app?

Can anyone explain what happens when you gift an app? I tried to gift "Where's My Water" to my son. How does he retrieve the gift? He tried to go to the App Store and download it (I thought it might already be marked "Purchased") but it wasn't. Does he get an e-mail with a retrieval code? His e-mail is set up to only get mail from certain people. What address would we need to add to his address book so the e-mail will go through? How do I get the confirmation resent to him?
Thanks!
Lynne

I used the "gift this app" button, but what happens after that? Does the person I sent the gift to get an e-mail or some kind of notification? My son's e-mail only lets through mail from certain people (and they don't tell you to make sure the person can get mail from [email protected] so they can get a verification). Do you know what address the verification comes from?
Lynne

In the iDVD window, there is a box in the lower left corner. When I scroll over it, I get the message to hide or show the intro movie. Checking or unchecking the box seems to do nothing. Can anyone explain?

Working with iDVD on a project, there is a box in the lower left corner and sometimes another in the lower right corner. Scrolling over the one in the lower left corner, I get a message indicating that this box hides or shows the intro movie. I have checked and unchecked the box, but see nothing different in the project. Nor can I figure out what is meant by "intro movie." Can anyone explain?

Go to iDVD Help and type in Intro Movie, and you will get the full version of this:
Many iDVD themes have “motion menus” that include animations or video that loop, or play repeatedly, until the viewer clicks a menu button. Themes with motion menus have a motion icon in the lower-right corner.
In addition to background video, iDVD motion menus may also feature an intro, or short animation, that plays once before the part that loops. Other motion menus also include an “outro” that plays after the viewer clicks a button, serving as a transition between the menu and the selected content.
An example of an iDVD 6.0 theme with an intro and an outro is Reflection White Main. In this theme, the first drop zones appear in the intro, and the buttons and title appear just before the looping part of the background video. In the outro, everything flies offscreen after the viewer clicks a button.
iDVD provides tools for viewing these motion menus without going into preview mode, which is especially helpful when you are filling drop zones, and for turning the intro or outro off.
Here are ways to view and edit the background movie:
◼
Drag the diamond-shaped motion playhead along the scrubber bar (shown below), to view the background movie, stopping wherever you like.
(If you don’t see the motion playhead in iDVD, choose View > Show Motion Playhead.)
◼
Deselect the checkboxes at the left and right end of the scrubber bar if you don’t want to use the intro or outro, respectively, in your DVD menu.
The scrubber bar shows the intro and outro as shaded areas at the beginning and end.
You can also control the intro and outro from the Menu Info window. With your pointer over the menu (and with no buttons or text objects selected), press Command-I to open that window. Select or deselect the Intro and Outro checkboxes in the Background section of the window.
NOTE: If you drag your own movie to a motion menu background, the outro is automatically removed. To customize the background and keep the outro, use a still image in the menu background instead of a movie.

When trying to sync my iphone in itunes i keep getting the error message "itunes cannot sync apps because the apps installed on the iphone could not be determined." can anyone explain what this means?

when trying to sync my iphone in itunes i keep getting the error message "itunes cannot sync apps because the apps installed on the iphone could not be determined." can anyone explain what this means?

I received the same error message after I had recently updated iTunes to 10.5.1 and I had wirelessly updated 13 apps. I had to go into iTunes and select Apps, on the bottom right it said I needed to update 13 apps. I updated the apps via iTunes and then synced again without an issue.
iPhone 4S / OSX 10.6.8 / iTunes 10.5.1

Ting to my itunes store can anyone explain the issue?

I have a problem connecting to my itunes store but my internet connection works just fine. can anyone explain this issue ?

Thank you for using the Apple Support Communities
From what I understand is that the device will show up in iTunes but it will not allow you to synchronize media over to the device even after you reset the device. When you say you reset the device, do you mean you restored the device in iTunes? What error message you are getting when attempting to synchronize media?

Can anyone explain what the 'other' storage consists of and how I can decrease the size please?

Can anyone explain what the 'other' storage consists of and how I can decrease the size please?

Welcome to Apple Support Communities
"Other" refers to OS X files, caches, downloads, documents. See Other in this website > http://pondini.org/OSX/LionStorage.html
I would not worry about Other because they contain files that you need, but if you want to decrease the size, start deleting downloads and documents

Can anyone explain origination/destination on the billing summary?

Similar Messages

Maybe you are looking for