Can anyone get lion to work with the older intel core duo iMacs?

Has anyone been able to get Lion to run on the older Intel Core Duo iMacs?

http://osxdaily.com/2011/04/08/hack-mac-os-x-lion-for-core-duo-core-solo-mac/

Similar Messages

Does itunes work with the new intel core duo processor?

i want to go buy a new laptop and the one I have in mind has the new intel core duo T2300 or the T2400 processor. Can i still download itunes onto this computer? Does it meet the requirments becuase the download page says you need a pentium or BETTER? The new macs are putting them in their computers, but will the windows and intel duo be able to support the itunes application?

are you asking if it is compatible meaning will it
install/run or are you asking if flash is
optimized to take advantage of this particular setup?
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
BAT06 wrote:
> I am currently looking at up grading to a new pc but
have heard that the new
> Intel Core Duo Processor isn't compatible with Flash or
Studio 8?
>
> Has anyone got a PC running with an Intel Core Duo
Processor, and if so does
> it work with Flash and or Studio 8?
>

How can I get Lion to work with label printer- Brother QL 570 or Dymo 450 Turbo?

I can't get Lion to work with label printers, either Brother QL 570 or Dymo Turbo 450. I want to uninstall Lion and use Snow Leopard unless there is a way to make Lion work with these devices. Any ideas?

Dymo has released new drivers since Lion came out. Have you downloaded and
installed them from the Dymo website?
Some people have said that their Dymo label printers were set to off line by Lion, but
worked fine after going to Print & Scan, selecting the Dymo printer, and making sure
it was active/on-line. I had to do that with my Dymo 450 Label Writer.
I cannot offer any tips about Brother, but you may wish to check their website
for latest drivers.

Lion OS to ever support the older Intel Core Duo processors?

Does Apple Lion OS have any intention of supporting the older Intel Core Duo processors? If not, then doesn't that mean there's a lot of Mac's that are going to be left behind? Does Apple plan to do anything else for these Mac's?

Intel Core Duos are older machines - the last one was discontinued in September 2006 (if I remember correctly); that means the newest of them is about 5 1/2 years old - a lifetime for electronics.
As for Apple having any plans for these older machines: first, we are not allowed to speculate here, but I can't see anyone supporting or doing anything for a computer that age.

I'm moderately competent, but can't get exchange to work with the 2 upgrade

My original iPod touch synced perfectly with my Outlook 2003 at work, both contacts and calendar until I updated to 2.0 to enable downloading applications. Now I get the "OutlookSyncClient.exe has encountered an error and must close." Error. I have tried all fixes and will have to move on, unfortunately, unless there’s a fix out there.
This is a corporate email/calendar and I can’t change every entry. It also involves Microsoft exchange, so I’m not sure how the .pst file is involved. Nevertheless. I have tried all the fixes that I can and nothing works. This device has been worthless for the last six months. Clearly something is wrong. I have tried many different computers networked to my account to try and diagnose this. Nothing works.
Any ideas? Anyone?

Hello, sorry to see you are running into this today. Below are some suggestions.
Have you tried uninstalling the following Apple Applications in the following order? After you have done that check out the following directory below.
1. Uninstall the following Apple Software in the following order to help reduce reboots
-Apple Mobile Device Support
-Apple Software Update
-Bonjour
-Windows iPod Updater (Name might be different but look for anything with the word iPod)
-MobileME Control Panel
-Quicktime
-iTunes
*Now reboot the computer
*Once PC is back up and running, then go ahead and go to C:/Program Files/Common Files
In this folder if you see an Apple folder. Delete this folder. Reboot one last time. Then download and install latest iTunes
http://www.apple.com/itunes/download/
*Post back as needed.

How can I get Recipefox to work with the latest version (16) of Firefox?

Recipefox worked on previous versions of Firefox. I could use the Grab It feature on many sites & easily retrieve recipes. Now, with the latest version of Firefox, it does not work on any of the recipe websites. Is there a more recent version of Recipefox that works with Firefox version 16, I am using 0.68. Does Recipefox get updated with newer versions of Firefox.

Hi,
You can try to right-click and '''Find Updates''' via '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''' > '''Extensions'''. You can also '''Remove''' it, and search and install via the Search box on the top right or from [https://addons.mozilla.org/en-US/ AMO].
[https://support.mozilla.org/en-US/kb/Using%20extensions%20with%20Firefox Using Extensions]
If problems persist you can reset Firefox and start afresh with [https://addons.mozilla.org/en-US/firefox/addon/recipefox/?src=search recipefox].
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Can anyone get Aperture to work with a new Canon 60D?

I am using version 2.1.4 but dont want to upgrade to V3 unless I really really have to. Help!

The support for RAW files must be revesed engineered because the camera companys don't share that information with either Adobe or Apple. So when a camera is released has very little to do with when they are supported. It is more a matter of how many changes were made in the new model. If most of the stuff for the old model only needs to be slightly modified then it quick. If on the otherhand it a total rewrite then it can take some time to get it supported.
Allan

Can't get 4.1 working with ALSA and Intel card

Hello everybody,
My problem is simple, but I cannot find any solution for it.
I have Arch Linux 64 bits installed with ALSA and a Intel onboard sound card
I can get the audio working simply installing ALSA and unmutting the channels, but I get no sound at the rear speakers and the center speaker (subwoofer).
I run:
$ spearker-test -c 5
And all I have is sound at the 2 front speakers.
Looking at alsamixer I only saw configuration for 2,4 and 6 channels. I am currently using the configuration for 4 channels.
I unmuted everything in alsamixer (playback) and nothing changed.
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ lsmod | grep '^snd' | column -t
snd_hda_codec_hdmi 23704 1
snd_hda_codec_realtek 59331 1
snd_hda_intel 25700 7
snd_hda_codec 97464 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74926 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
snd_timer 18966 1 snd_pcm
snd 60021 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
Anyone knows how to make it work? Thanks!

Thanks for the answer, tried this command, here is the output:
$ speaker-test -t wav -c 5 -D surround41
speaker-test 1.0.26
Playback device is surround41
Stream parameters are 48000Hz, S16_LE, 5 channels
WAV file(s)
Broken configuration for playback: no configurations available: Invalid argument
Setting of hwparams failed: Invalid argument
Is there something needed to make this command run correctly?

I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI inputs in the back.

I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
The receiver has two HDMI inputs in the back. However they say they are not for PC's. Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables. I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV. But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
My Email is [email protected]
Do you have any suggestions
Thanks
Bob

I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
Bob

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

My printer is a fairly new all-in-one Brother MFC-7860 DW. It is not listed in the iPad AirPrint printers. Can I get it to work with my new iPad2?

My printer is a fairly new all-in-one Brother MFC-7860 DW. It is not listed in the iPad AirPrint printers. Can I get it to work with my new iPad2?

If it's not an Airprint enabled printer, you can not natively through your iPad. BUT, there are apps you can purchase in the App Store, like Print Central ($9), which is what I use myself and works well for my needs.

I can't get Illustrator to work in the Yosemite Beta. Can anyone help?

Hi there,
I can't get Illustrator to work in the Yosemite Beta. Can anyone help?
Much appreciated,
Jon

Thanks so much for reaching out!!!!
Here’s what I am experiencing more specifically:
1. Illustrator is not showing up in my Application folder.
2. My creative cloud app manager says that Illustrator is installed.
3. I try to download it from Adobe.com and it never initiates the download.
Does that ring any bells?
Thanks so much for your help!
Grateful,
Jon
Jonathan Bailey
Co-founder at Lightstock
(214) 284-2597
@jonathanrbailey
On Wed, Oct 1, 2014 at 5:08 PM, Monika Gause <[email protected]>

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues.

I need help with ISIGHT! I can't get it to work with MSN!

HI,
My issue is this... I have AIM/AOL and I am able to see myself on webcam.. however noone else can unless they HAVE a webcam... My first question is- "DO you have to have a WEBCAM on both ends for both people to see you?" Does the person I am chatting with HAVE to have a webcam to see me? If so WHY? They should atleast be able to see ME if I want them to... Also if they are using windows for PC platform... can they use a pc webcam and still connect with me through my isight although I am on a mac?
My second major ISSUE is.. WHY is the isight only compatible with AOL/AIM? I was told when I bought this it would be compatible with MSN Messenger for windows AND the MAC version... I have both and the isight does not show up on it... CAN ISIGHT be connected to msn messenger for MAC??? PLEASE help me!
I called APPLE tech support and they couldn't even help me! They told me to call Microsoft! Anyhow- one guy did say he was able to get his ISIGHT working with the MSN messenger for MAC platform.. do you have ANY idea how to do that?? The thing is ALL my freinds are on PC's and have MSN messenger..
ALSO- someone on mac rumors told me to look for a guy names RALPH! Said you know A LOT about mac and pc compatibility! PLEASE HELP
Bottom line - I want to use isight with msn so my msn pc friends can share webcam... I also have virtual pc software... is it easier to just get a pc webcam and do it through there? ( i tried that and it didn't work either) i need major TECH SUPPORT!
THANK YOU

Microsoft's Messenger for Mac (MSN) does not support webcams at all.
I have found the best alternative to MSN to be aMSN with macam for the webcam driver (it is a cheap usb webcam). Both are free open source projects. I guess if you use an iSight you will not need macam.
aMSN can be found here: http://amsn.sourceforge.net/
macam can be found here: http://webcam-osx.sourceforge.net/
The speed is substantially faster and it is far more stable than Mercury in my experience.
The only difficulty is the camera is often shown as being "in use by another application". To counter this I start macam, then plug in the camera (or unplug and plug back in). Then I start aMSN.

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

Can anyone get lion to work with the older intel core duo iMacs?

Similar Messages

Maybe you are looking for