Can anyone help me? Should be ea
Hi all.. I have an older Sound Blaster Li've 5. card i am trying to install on my wife's new HP. I lost the old install disk and when i put in the card and booted up, i got the New Hardware Found thing...but when i try and update the drivers from this website, it's saying no sound blaster card installed? It's also not showing up in Device Manager? When i run the "auto update" from this site though..it read the card on the PC?!! Wierd huh? Any ideas on what i can do to fix this? PC is brand new btw..card is over 2 years old..but working as far as i know.
I have XP...i would like to use this PCI slot to keep the card away form the x950pro card as that thing runs pretty hot. I will try to reseat the card again i guess.... Strange though..under sounds,video and game controller it shows a Creative SB Gameport..but under Other Devices it has the yellow question mark. Seems to know it's there..but just not all the way. At any rate..i cant install drivers because it isnt showing where it needs to.
Similar Messages
-
My mail forms created by muse 2014.0.1.30 do not work. PHP 5.4 is enabled by my hoster, so they should work. Can anyone help me, for these forms are crucial for my business. The forms confirm delivery, but the mails are not recieved. No spam filters enabled.
Meanwhile, I was able to narrow the problem down: PHP seems not to accept a re-directed mail address as sender of the mail in some cases. So, it has nothing to do with the mail form itself.Hi Ingo,
Please refer to this document, Troubleshooting Muse Form Widgets Used on Third-Party Servers
Last section, "I've uploaded my new Muse form, and tried submitting it in the browser, but I never receive an email with the form data. What's wrong?"
- Abhishek Maurya -
When I power up my Mac-Pro I only get a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?
Whatever the problem is you no longer have a bootable system. You need to try reinstalling OS X.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Need help with burning a dve from an imovie I have completed. I cannot find iDVD which i understand I should have with my original package.
Can anyone help.
Many thanksiDVD has been discontinued by Apple and new machines don't include it or even a DVD drive for burning.
If you've purchased the iLife suite on DVD then you can re-install iDVD from it. It is not a part of any OS X. -
My iphone keeps freezing, especially in the mail setting. The support center indicates i should go to settings, then general settings, and then to update software, but there is no "update software" selection under general settings. can anyone help? Thanks!
PS i think I have an iphone4, but not sureYou may connect it to iTunes and update it from there.
-
i updated my iphone to ios 6. now i can not charge my phone with any cable. it says charging do not support this accessory. what should i do now? can anyone help please!!!!!!!
I upgraded my iPhone 4 last evening to iOS 6, the upgrade completed and the device was usable. Then in the morning I went to the device to check E-mail, Voice Messages, Test Messages, etc... and the phone was dead. I tried plugging the device into a charger (for a couple of hours) - still dead. Plugged into computer with iTunes, device not recognized or discovered, and iPhone was still dead... Took the iPhone into an Apple Store and the Technician looked it over for any visible signs of defect/malfunction, then performed various tasks to breathe life into the phone - nothing... His suggestion, at this point, was to replace the phone. He speculated that the iOS upgrade possibly corrupted the iPhone's charging firmware, and that this device was now a BRICK. Keep in mind that the phone and it's charging abilities were perfectly fine prior to the iOS Upgrade. I hate to go through the replacement hassle and the cost ($159.00) when the iOS upgrade caused the problem. Any suggestions? Thanks!
-
My iPad 2 screen has greenish, pinkish streaks all over. I have hard started and restored but no change. What should I do? It's still under warranty. Can anyone help here?
Call apple or take it into an Apple store. What's wrong is beyond a user fix.
-
for the past 2 weeks I can not sync my iphone contacts or calendar to outlook. I have spent 5 hours reading on how to fix this matter but nothing works.
Can anyone help me?The warranty entitles you to complimentary phone support for the first 90 days of ownership.
-
Hi Just wondered if anyone can help with the above question? I had O2 phone unlocked and bought a local sim card, but although the calls are fine i have no option for internet etc. I have done searches and got the info details from the sim provider to activate, but instructions say i go to : Settings; General; Network and then Celluar Data Network, but I dont get that option ? When i put back my O2 sim card, the option reappears?
Can anyone help me please? Off to Australia again soon and really could do with it working properly this time.
Thanks everyone
RonnieHi Ronnie, was wondering what brand sim card you bought?
Was it from Telstra, Optus, Vodafone, Virgin or Mayasim?
I have a 4 S running iOS 5.01 is there an option in Settings - Network - Carrier? As this should be set to the supplier of the sim card. In my Settings - Network there is no option for Celluar Data Network.
What version of the iOS are you using?
Some prepaid sim cards may not have a lot of data, so I suggest searching the companies websites for the best deals before you come here. Telstra usually have good plans. If you take your phone to the shop you purchased the sim card from they will usually set it up for you.
Telstra runs on a different frequency to others and offers the best coverage in Australia.
Just for the record I am not an employee of any mobile company. -
can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
I can't send emails from iPhone until I connect to my wifi at home. I am with bigpond and have a bigpond email address. Can anyone help me?
Try closing the Mail app completely and see if it works properly when you re-open it : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I got an iPhone 4 on Thursday.
I connected it to my PC, a Windows Vista, that day and nothing showed up besides a "camera."
My computer picked it up as a camera, which I understand is a common occurence in the iPhone.
After browsing countless youtube videos and Apple Forum Questions, nothing helped.
I put it into recovery mode by holding on the power and menu button, but when I opened iTunes it still didn't detect anything.
I feel like I'm almost hurting my iPhone because I turned it off and on so many times, and plugged it in and out several times, and so forth.
Here is what happened after putting it into recovery mode: 1. A Windows "device locator" popped up. 2. It was looking for a solution to help me with the unknown device, or iPhone. 3. I clicked onto the find solution button, and it told me that I needed a disc.
--- I didn't have a disc, so I looked up this problem and it told me to manually find Apple mobile device support on my driver, so I did.---
4. I then went onto Control Panel and clicked on SYSTEM and MAINTENANCE and went to DEVICE MANAGER.
5. There I found my iPhone listed under USB controllers.
6. I uninstalled and installed it several times.
7. I then manually found a program to ease the problem. The program was "apple mobile device support," which was located on my apple driver.
8. Nothing happened, besides it reporting to me that Apple USB was found and that "code 39" or "code 1" was in the way.
9. I didn't know what to do with this....
By this time, I was about to give up on my iPhone and return it back to the store.
I tried again, but in a different way this time.
1. I put it back into recovery mode and I opened itunes.
2. itunes reported to me that some burning or CD/Drive software was missing and that I needed to reinstall it.
3. SO, I reinstalled it several times, about 12 (iTunes), and nothing changed.
4. I then looked up the problem of why the CD/Drive software problem kept popping up.
5. I fixed it by going to my registry and adding an UpperFilter with the code GEARaspi...something like that.
6. The problem was fixed, but still no iPhone onto my itunes.
I stayed up all night last night to fix this problem...I'm annoyed and tired.
I tried another problem to fix this.
1. I didn't put it into recovery mode.
2. My iPhone showed up under portable devices under "device manager," from SYS/MAIN"
3. I did update software.
4. I clicked on "apple mobile device support" but nothing happened.
5. It reported to me of the Code thing again.
I even called the Apple people and they didn't know what to do, so I stopped calling them...because they only had limited options to fix the problem.
Can anyone help me?There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
Can anyone help me ? all songs on my ipod are gone, but still in library.
can anyone help me ?
when i plug my ipod into my computer, itunes comes up,and i noticed that everything under the "playlist" section,for ex."recently added" "recently played" etc., are no longer there.
when i try syncing my ipod an error comes up and says
"songs on the iPod cannot be synced because all of the playlists seleccted for syncing no longer exist"
and all my songs are still on my library, but there are no songs left on my ipod.
can anyone help me fix this problem im having ?
dell Windows MEcan anyone help me ?
when i plug my ipod into my computer, itunes comes
up,and i noticed that everything under the "playlist"
section,for ex."recently added" "recently played"
etc., are no longer there.
when i try syncing my ipod an error comes up and
says
b>"songs on the iPod cannot be synced because all of
the playlists seleccted for syncing no longer
exist"
and all my songs are still on my library, but there
are no songs left on my ipod.
can anyone help me fix this problem im having
dell Windows ME
one of the problems may be that the original files may have been moved.
before you do anything, open itunes, then click on the ipod icon on the left side of the screen. there should be 4 check boxes. make sure the "manually manage music" check box is filled in
for one thing, try finding the folder where all of your music is stored.
then, click and drag the music into itunes, or onto your ipod.
Windows XP -
I Have an iPad mini, iOS 8.1. When I'm on my iPad, it keeps going in and out of random apps. Going to settings is the worse. As soon as I click settings and it opens,it starts clicking different things and tries turning on and off settings! In Facebook, profiles and status get clicked. The screen zooms in and out multiple times. It reminds me of when you call the help desk for a computer or a computer at work and they gain access and move around clicking and you're doing nothing. Basically things are being clicked and I'm not doing it.....can anyone help?
At this point, I would go for reset to its factory default condition, using the iTunes program to get a clean system install. That way you'll clean everything out and just have it set up the way it would come from the factory. You'll need to do your backup (on the iTunes program too) and be sure you understand which stuff will be saved and which will not (from the links below). Also turn off any anti-virus program you may have on your desktop. Then when you reset it to the factory default condition, don't restore your backup just yet ... until you check it out without your data put back on it. Verify its operation first, to make sure that you know it's okay. Hopefully everything is okay at that point, otherwise you'll have to take it into Apple to check it out for any hardware failure.
Here are the links, and the last one pertains to the reset to factory default condition ...
Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)https://support.apple.com/kb/HT5262
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
http://support.apple.com/kb/ht4946
iOS: Troubleshooting Encrypted Backups
http://support.apple.com/kb/TS5162
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414 -
i carnt hear my message tone,the sound it makes when the phone locks and opens,also i am unable to hear music when playing from my phone but my ringtone and alarm tone work.Ive made sure the silent button is not on,and the volume button on the side of the phone is just showing it blank instead of it going up and down.To try and fix this i have reset my settings and restored my phone,but now its just skipping the music i have purchased from itunes when in a docking station which is now another problem i have as well.Can anyone help????
Hello dbrookes,
Thank you for using Apple Support Communities!
It sounds like even though the Mute switch is not on, sounds are not making the, well, sound they should, and the volume buttons make a blank volume indicator appear on the screen that does not show the volume level.
I wanted to recommend a couple of things.
First, I would reset the phone:
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If that does not resolve the issue, then you may want to try backing up to iTunes, and restoring the iPhone again but this time do not restore the backup and set it up as new to see if the issue persists without the previous configuration.
Just incase you need it, this article will help with that:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Cheers,
Sterling -
please can anyone help me to download some apps for my iphone .. i am simply not able to log in to the itunes store , when i enter my apple id it says that it has not yet been used with the itunes store
Ok, you should generally only get this when you are converting your ID to an iTS account for the first time.
Sign into iTunes with your Apple ID and you should get this.... IRC once you agree or accept it's now an iTS account and you wont get that again.
Maybe you are looking for
-
User permission problem, OSX 10.6 & 10.3.9
We have a small network with an old G3 server (non-Intel even) running 10.3.9. We had 3 Mac minis with 10.3.9, but just upgraded to new minis with 10.6.3. The files saved to the server now get their permissions messed up. They get saved to the ser
-
Server Admin 10.6.5 won't connect to OS X Server 10.6.6
Recently upgraded Xserve to 10 10.6, ran software update to 10.6.6. Cannot connect to it using Server Admin 10.6.5. Checked for updates, and haven't found any. I can connect via Workgroup Manager, and client computers can connect to server. Any sugge
-
Realtek 8188EE wifi card alternative for 15-f018ca
I need to replace the unreliable Realtek 8188EE wifi card that came with my laptop. How do I find a wifi card that is compatable with my computer? Thanks, Bob.
-
Invalid objects found in Repository
I am installing grid control 11.1 to redhat 5.2, with repository database of 11.2 locate on the same host. At step 7 of 13 connect to database, I provided the host, port, service and sys password and clicked Next, and I got a simple error messageInva
-
We use CS3 on one of our machines and now, as some others have experienced, whenever we try to open any CS3 application, the 'register' window opens, but is blank and cannot be skipped. Thus we now cannot use any CS3 products. This has been raised a