Can anyone help; re: Faxing problems with my 6200 all in one
Our HP office jet 6210 which we use only for faxing and minor printing intermittenly goes crazy with blinking red and amber lights
when a fax is being received or when we are sending one. When the fax fails and we stop the blinking lights, it self tests then turns off. Sometimes when it does this we get an error message printed that says "Power Failure." The party being faxed gets 1/2 a fax or 1 page out of 5. I'll unplug it from the electric and plug it back in and then it will work fine for a day or two. We have tried faxing from the glass when we have problems and that seems to work when self-feed faing doesn't. We have not installed any drivers as this is not plugged into a computer but stands alone with it's own designated phone line.
Any ideas??? The machine is 5 years old and has never given us any trouble until now. Is it time to upgrade?
Thanks so very much!!!!
Joanne
I have a new photosmart plus printer B209a CD035A and I have never been able to set up the fax, I get a message saying that the phone line is not connected to the modem, the phone is connected to my modem or I would not have an internet connection, perhaps I am not understanding it, I have the printer set up wireless now but it was wired before and I still could not set it up, I purchased it in April this year along with my new desktop Elite HPE-150f model AY603AA, using windows7 64 bit, now I have a problem with the alignment, all the fonts are cut off down each side which makes it hard to read instructions, can someone give me some help with this. The alignment problem has only just started this past 2 weeks. thanks
Similar Messages
-
Can anyone help me? Problems with external mixer?
Hey all,
First off i would like to say hey to everyone as i am new so i hope someone out there can help me and me likewise in the future.
Onto my problem. I recently bought an Alesis Multimix 8 USB and i am having a few problems with my iBook recieving the left and right signals from the device. I am currently running it through Ableton Live however when it recognises the mixer it says that there is only one input, the left one.
For the work i am trying to do i would need the left and right inputs to act as seperate channels into Live. When i first bought the mixer it worked fine and Live read 2 inputs easily however now for some reason it has stopped seeing one.
I think it may be a problem with the audio software in OS X 3.9 but i am not sure, i am trying to repair what i can however it seems to me that the only option i may have would be reinstalling 3.9 again from scratch.
If anyone has any ideas about what could be wrong or how to get the 2 inputs back i would be very grateful.
Please help me as this is driving me mad!
Cheers
JonHi Jon and welcome to Apple Discussions.
I cannot pretend that I know anything about your subject but a couple of non invasive things you can try before resorting to a re-install. (Usually a last resort with Macs).
1) Have a look at Audio MIDI setup in your Applications>Utilities folder and see if there is a setting there that with resolve your problem.
2) Create a new user in System Preferences>Accounts.(always a good troubleshooting measure this, whatever the problem). Log out of your own account and into the new. Does the problem persist? If it doesn't there'll probably be a preference file somewhere to do with the device you are using.
If the problem does persist then it could be the unit itself, the lead (have you tried a different one/port?), or - worst case scenario- a hardware/sw problem with your iBook.
Not a lot of constructive help, I'm afraid, but some avenues to explore…
Best of luck,
Adrian -
Can anyone help? having problems with Spry Horizontal Menu in IE
Hi can anyone take a look at the code ive got or go to the site www.cj-it-pcfix.info ( using IE ) and see why the sub-submenu covers half of the submenu box? If you hover on "computer Store" then hover over any of the tabs below that you will see what i mean. here is the code...
ANY HELP WOULD BE GREAT!!
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - Revision: Spry Preview Release 1.4 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
cursor: default;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
margin: 0;
padding: 0;
list-style-type: none;
font-size: 10.3px;
position: relative;
cursor: pointer;
width: 12em;
float: left;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
padding: 0;
list-style-type: none;
font-size: 100%;
z-index: 1020;
cursor: default;
width: 8.2em;
position: absolute;
margin: 0;
left: -1000em;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
left: auto;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
width: 13.5em;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
margin-top: 0%;
margin-right: 0;
margin-bottom: 0;
margin-left: 100%;
position: absolute;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
left: auto;
top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
border: 1px solid #CCC;
#MenuBar2 {
padding-left: 5px;
.border {
border-right-width: 1px;
border-right-style: solid;
border-right-color: #f0f0f0;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
display: block;
cursor: pointer;
background-color: #0579b1;
color: #FFFFFF;
text-decoration: none;
padding-top: 0.5em;
padding-right: 0.75em;
padding-bottom: 0.5em;
padding-left: 0.75em;
border-left-width: 1px;
border-left-style: solid;
border-left-color: #f0f0f0;
text-align: left;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
background-color: #000000;
color: #FFFFFF;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
background-color: #a8a8a8;
color: #FFFFFF;
border: 1px solid #000000;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
position: absolute;
z-index: 1010;
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarHorizontal li.MenuBarItemIE
display: inline;
background: #FFF;
float: left;You have a set of conflicting widths:
ul.MenuBarHorizontal li { width: 12em;}
ul.MenuBarHorizontal ul { width: 8.2em;}
ul.MenuBarHorizontal ul li { width: 13.5em;}
ul.MenuBarHorizontal ul ul
margin-top: 0%;
margin-right: 0;
margin-bottom: 0;
margin-left: 100%;
position: absolute;
So, to translate:
All list items will be 12 ems wide
First submenu list (ul) will be 8.2ems wide
First submenu list items will be 13.5ems wide
this supersedes the 12ems for all sub and sub-submenu list items
Sub-submenu lists (ul) will hang off the right side (margin-left: 100%)
Internet Explorer is interpreting #4 to mean at the right side of the ul (which is at 8.2em)
Other browsers are interpreting #4 to mean at the right side of the li (which is at 13.5em)
I believe that is what is happening on your menus.
Beth -
Can anyone help on integrating Unifier with WebCenter Portal ? We are looking for a solution where we can show Unifier pages within WebCenter Portal application. Is this possible ?
If you simply would have posted here first, there are plenty of people who would have informed you of the current policy to have a data plan active on an account during the entire contract if purchasing a discounted smartphone.
Unfortunately, there are just as many on here who would claim the people informing you about this policy of being Verizon plants spreading disinformation and trying to make people afraid to upgrade via this route.
Yes this is a new policy, one which has been pointed out multiple times in these forums. Good luck, but I doubt you will have an outcome over this which will make you happy.
Verizon is closing as many loopholes to keep unlimited data as they can. -
Where can I find my fax number? I have all-in-one 3050A--J611 Series
where can I find my fax number? I have all-in-one 3050A--J611 Series
it seems ur printer model doesn't have a fax option ........
-
We used to have BT as our broadband provider and then switched to Talk Talk. Since the switch we cannot send e mails although we are receiving them on the old address. We don't understand what has gone wrong. Can anyone help?
Thank you
EllieYou need to contact T-T and find out their SMTP settings ( which allows the sending of emails over wifi via your ISP) This info is probably on their website
I assume you do not have a 3G iPad .In which case go to the Apple site
http://www.apple.com/support/ipad/
where you should find very clear guidance on most issues -
Can anyone help: my iphone 4 says no signal all the time
Hey guys,
Can anyone help me? I have done a factory reset on my phone and ever since, my phone will not regester any signal what so ever.
It just says "no signal" all the time. I have tried to reset network settings on it, but that doesnt work. Ive also tried to change carrier as it keeps telling me "your selected mobile network is restricted, you can choose a different network in settings." so ive tried every other network there is, but up until I did a factory reset it was working perfectly well on O2 if anybody could help itd be much appriciated.
Thanks in advance
SarahMarc,
Here's my story. Received iphone 5.... went to verizon and had them turn it on to my account. On to apple store to buy apple care. Put on Zagg sheild cover in the mall. Returned home. Played with phone.. no service. Tried to call myself via house phone.. no luck. No mail box set up. Can't set it up if I cant use the phone. Bummed. Called Verizon. He (David) suggested I return the phone to Apple store. Made an appt at the genius bar for the next day. In the store I had two bars, gal next to me had 4 bars on Iphone 4s with Sprint, Guy across had ATT with 3 bars. Now I had a new phone. New one was great - now had 4 bars in the apple store. Left... went to ZAGG, reinstall cover sheild then to Verizon and had them set it up with my phone number. Worked great while out and about.
Get home -- no service. Bummed again.... I checked the Verizon map and I was on the cusp of G4/G3. My phone was reading -- "o" and flipping to no service. David had told me he would call me back later that day, after I made a swap of my phone. David did call and suggest I get a signal booster. I placed an order for one. It arrived in two days, set it up - easy - and waited for all the lights to turn blue.... WALAA! Called the special number and the phone works great from home.
I get G3 service at home and when I am out LTE service. Funny - the LTE service light comes on right when I am exiting my driveway to the road. But I am glad that I have service from home. David called me again to check on how things worked out. So far I am good with my phone and service.
Signal booster from Verizon was my fix. Hope my story helps someone in the same situation. -
I cannot get all the Flaming Pear plug-ins to work. I have dragged them into my Photoshop CS6 plug-ins folder but they do not show up under "filters". Also among the ones that do show up and that do work, I am having crashing problems. I chatted with Adobe (they do not answer their phone) and they said "You cannot use any plug-ins with Photoshop-uninstall them right away". When I said, "Then what's the use of Photoshop?" the guy ended my chat session!?!?!?!
Flaming Pear does not reply. What is the problem with the plug-ins?Kreplach,
Open CS6 > Preferences > Plug-ins
in the preferences menu > select plugins on the left column > and check the box additional plugins folder
choose > location of a plugins folder (make one or use the mounted volume of the dmg I downloaded from pear site)
You need to close Photoshop CS6 and reopen it for the plugin to load:
Enjoy,
Sidonsoft -
Power problem with my 4620 all in one printer / scanner / fax
Hi,
My problem is this. I have a 4620 all-in-one printer / scanner / fax. However, I have discovered this problem.
Scenario:
The printer hasn't been used for a day or two but is plugged in still with the light above the power cord on. I want to print a word doc or whatever. I click print. I obtain a message that the computer (via wifi) can't communicate with the printer. Pressing the Power on button on the printer interface doesn't work.
My solution, I have to disconnect the power supply from the printer, then reconnect and then press the Power On button.
This isn't normal I think. I don't think for one minute that I should have to go and disconnect and reconnect the power suppy for it to print etc.
Any ideas?
Thank you in advance!!maybe here: http://discussions.apple.com/thread.jspa?messageID=11110856� ?
found doing a quick search of the forum
all results here: http://discussions.apple.com/search.jspa?objID=c263&search=Go&q=laser+printer
JGG -
Having problem with HP Deskjet All-in-One 3050
I am trying to help someone who was given a Compaq Presario C700 (running Vista) and a HP All-in-One 3050 by her son. She doesn't understand how to use her computer, and it contains the remnants of things people have done to it trying to help her.
I believe her son set her up to use gmail by logging in the the gmail site and reading/writing her mail there. She would like to print her mail on the printer, and we managed to do that, even printing attached photos, but now printing doesn't work. It prints a Gmail header and her email address in color, but the text of the message, which is in b/w doesn't get printed. Print preview shows it as it should be. I created a simple document in wordpad and tried to print it and the same thing happened, except in this case the page was completely blank.
On the other hand, when I printed her inbox at gmail.com using File>Print, it did print the titles of messages listed.
The printer is connected to the computer over the local wireless network.
Could this have something to do with the cartridge being used up? Also, were that the case, wouldn't the printer indicate that somehow.
Any suggestions about how to proceed would be helpful.Hello,
If you want to have the printer hooked up with a USB cable with printing option, then please try the below steps..
1.Click Start button on the Computer .
2.then click on Control Panel .
3.then Printers and Faxes
4.On top-left, click on Add a Printer
5.Click on Add a Local Printer
6.Then while "Use an Existing port" is selected , select "Virtual USB port ... " then click Next
7.from the Manufacturer list, select HP, and then under Printers list select Deskjet 990c" , then Click next and complete the wizard
Now try printing . It should work.
If you want to try using wireless installation then please visit www.hp.com/go/wirelessprinting
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP. -
Printing problem with HP F380 All-in One printer.
My HP F380 All-in One has stopped printing in colour. Don't know if I've accidentally changed a setting but I've unchecked 'Print in grayscale' and no difference. Can anyone please advise.
Hi there,
Welcome to the HP Forums!
I understand that your HP F380 has stopped printing in color, and I am happy to help you with this printing issue!
For further assistance, I will need to know the following:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please take a look through this guide. Streaks or Lines in the Printed Image.
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Wireless printing problem with HP Envy all-in-one 110 when running Mac OS 10.7
I just bought the HP Envy all-in-one 110. I have a Macbook Air running IS 10.7. I managed to install the software correctly and the wirless network light is showing on the printer. I ran a test page from the printer and all the settings say they are "enabled." But I still can't get the printer to print over the wireless network. When I plugged in a USB cable, I managed to get it to print. I have a wireless router running over the Sonic.net DSL network. Network strength is good. I've switched off and restarted all equipment several times but still no results. Help!
Hi,
I believe the router may not support Multicasting, a network protocol used for Apple's Bonjour service to operate as it should.
Will be helpful to know the exact router brand and model.
As a workaroung, you may try setting the printer by using standard IP, it should allow you to print, however the router issue (more likely) have to be handled first to allow the full software functionality including scanning.
Follow the steps below to set an IP print queue, it will also help to better understand the cause for the problem:
Enter System Preferences > Print & Scan.
Click the plus sign.
Click the IP icon.
Select the HP Jetdirect Socket protocol.
Enter the printer IP address into the Address field
Now try printing using the newly created print queue, listed as the printer IP address.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Ink Cartridge problem with the 7525 all in one printer
I put all new cartridges in the 7525 all in one printer and it keeps telling me that the cyan cartridge is damaged. also the ink levels on the new cartridges are not appearing full. they are all new HP cartridges.
The troubleshooting steps in the document here may help resolve the issue with your cyan cartridge on your Photosmart 7525 printer.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Printer: Driver Update Problem with HP 6700 All In One Printer
My HP 6700 All in One Printer is not set up correctly on my laptop (16 months old),. I need to update the Driver but the auo system says the driver can not be found, when I try to do in manually it loads onto my lap top but does not update the printer. Any suggestions?
Hi,
I request you to try the following:
For network connection:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03086294&tmp_task=useCategory&cc=us&dlc=en&lc=e...
For USB:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03521864&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "
Kudos! Thumps Up" which is on the right
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue
Regards,
Ray -
Can anybody help solve my problem with compilation?
In win XP i try to compile program.
javac Lematizator.java
Lematozator.java:85: cannot find symbol
symbol : class PodstatneMeno
location : class slovnik.Lematizator
static ArrayList<PodstatneMeno> zoznamPodstatnychMienZoSlovnika = new ArrayList<PodstatneMeno><>;
^
There are more errors this is just example, how can i repair it?
This is code:
package slovnik;
import java.io.BufferedReader;
import java.io.FileReader;
//import java.io.PrintStream;
import java.util.ArrayList;
import java.util.Vector;
public class Lematizator
static String suborSPredlohami = "predlohy.txt";
// static String slovnik = "slova.txt";
static String zoznamPodstatnychMien = "podstatneMena.txt";
static ArrayList<PodstatneMeno> predlohy = new ArrayList<PodstatneMeno>();
static ArrayList<PodstatneMeno> zoznamPodstatnychMienZoSlovnika = new ArrayList<PodstatneMeno>();
static ArrayList<PodstatneMeno> mozneTvarySlova = new ArrayList<PodstatneMeno>();
// static ArrayList<String> slovaZoSlovnika;
// static String slovo = "slovách";
static String slovo = "slová";
// static String slovo = "mestách";
// static String slovo = "cestách";
public static void main(String[] args)
String slovo0 = "slovo";
String slovo1 = "";
String slovo2 = "";
String slovo3 = "";
String slovo4 = "";
if (args.length>0)
slovo0 = args[0];
if (args.length>1)
slovo1 = args[1];
if (args.length>2)
slovo2 = args[2];
if (args.length>3)
slovo3 = args[3];
if (args.length>4)
slovo4 = args[4];
System.out.println(slovo0);
System.out.println(slovo1);
System.out.println(slovo2);
System.out.println(slovo3);
System.out.println(slovo4);
System.out.println();
System.out.println(Lematizator.najdiVsetkyZakladneTvary(slovo0));
System.out.println(Lematizator.najdiVsetkyZakladneTvary(slovo1));
System.out.println(Lematizator.najdiVsetkyZakladneTvary(slovo2));
System.out.println(Lematizator.najdiVsetkyZakladneTvary(slovo3));
System.out.println(Lematizator.najdiVsetkyZakladneTvary(slovo4));
public static String najdiZakladnyTvar (String slovo)
ArrayList<PodstatneMeno> zt = najdiZakladneTvary(slovo, false);
if (zt.size() > 0)
return zt.get(0).getTvar();
else
return null;
public static ArrayList<String> najdiVsetkyZakladneTvary (String slovo)
ArrayList<String> z = new ArrayList<String>();
ArrayList<PodstatneMeno> zt = najdiZakladneTvary(slovo, true);
for (int i = 0; i < zt.size(); i++)
String t = zt.get(i).getTvar();
boolean nebolo = true;
for (int j = 0; j < z.size(); j++)
if (t.equals(z.get(j)))
nebolo = false;
if (nebolo)
z.add(t);
return z;
public static ArrayList<PodstatneMeno> najdiZakladneTvary (String slovo, boolean vsetky)
ArrayList<PodstatneMeno> vystup = new ArrayList<PodstatneMeno>();
if (predlohy.size() == 0)
predlohy = Lematizator.nacitajPredlohy(suborSPredlohami);
if (zoznamPodstatnychMienZoSlovnika.size() == 0)
zoznamPodstatnychMienZoSlovnika = Lematizator.nacitajZoznamPodstatnychMien(zoznamPodstatnychMien);
mozneTvarySlova = Lematizator.najdiMozneTvarySlova(slovo);
for (int i=0; i < mozneTvarySlova.size(); i++)
PodstatneMeno pm = mozneTvarySlova.get(i);
if (pm.jeVZoznamePodstatnychMien(zoznamPodstatnychMienZoSlovnika))
vystup.add(pm);
if (!vsetky)
return vystup;
return vystup;
static ArrayList<PodstatneMeno> nacitajPredlohy(String suborSPredlohami)
ArrayList<PodstatneMeno> vystup = new ArrayList<PodstatneMeno>();
try
PodstatneMeno zt = null;
String nemennaCast = "";
String skratkaRod = "";
String skratkaCislo = "";
String skratkaPad = "";
String koncovka = "";
BufferedReader br = new BufferedReader(new FileReader(suborSPredlohami));
String riadok;
while ((riadok = br.readLine()) != null)
if (riadok.equals("koniec"))
br.close();
return vystup;
if (riadok.startsWith("="))
zt = null;
if (!(riadok.startsWith("-") || riadok.startsWith("=")))
riadok = (riadok+" ").replaceAll("\t",":");
String[] cs = riadok.split(":");
if (!cs[0].trim().equals(""))
nemennaCast = cs[0].trim();
if (!cs[1].trim().equals(""))
skratkaRod = cs[1].trim();
if (!cs[2].trim().equals(""))
skratkaCislo = cs[2].trim();
if (!cs[3].trim().equals(""))
skratkaPad = cs[3].trim();
koncovka = cs[4].trim();
PodstatneMeno p = new PodstatneMeno(nemennaCast,koncovka,skratkaRod,skratkaCislo,skratkaPad);
if (zt == null)
zt = p;
p.setZakladnyTvar(zt);
p.setPredloha (p);
vystup.add(p);
br.close();
catch (Exception e)
e.printStackTrace();
return vystup;
static ArrayList<PodstatneMeno> najdiMozneTvarySlova (String slovo)
ArrayList<PodstatneMeno> vystup = new ArrayList<PodstatneMeno>();
for (int i=0; i< predlohy.size(); i++)
PodstatneMeno predloha = predlohy.get(i);
if (slovo.endsWith(predloha.getKoncovka()))
String jadro = slovo.substring(0,slovo.length()-predloha.getKoncovka().length());
PodstatneMeno zPredloha = predloha.getZakladnyTvar();
PodstatneMeno zt = new PodstatneMeno(jadro, zPredloha.getKoncovka(), zPredloha.getRod(), zPredloha.getCislo(), zPredloha.getPad(), null, zPredloha);
//System.out.println(zt);
vystup.add(zt);
return vystup;
static ArrayList<PodstatneMeno> nacitajZoznamPodstatnychMien (String subor)
ArrayList<PodstatneMeno> vystup = new ArrayList<PodstatneMeno>();
try
BufferedReader br = new BufferedReader(new FileReader(subor));
String riadok;
while ((riadok = br.readLine()) != null)
riadok = (riadok+" ").replaceAll("\t",":");
String[] cs = riadok.split(":");
PodstatneMeno pm = new PodstatneMeno(cs[1].trim(), cs[0].trim());
vystup.add(pm);
catch (Exception e)
e.printStackTrace();
return vystup;
return vystup; Thanks
Edited by: 855126 on Apr 27, 2011 11:22 AM
Edited by: EJP on 28/04/2011 21:39: added code tags. Please use them.Please put your code within tags to make it more readable, and then someone will be more willing to offer advice.
As to your error, the message is telling you exactly what the problem is. Your code can't find the class PodstatneMeno. My first question would be, "Is PodstatneMeno in the same package as Lematizator?" If it's not, then you need to import it in your Lematizator class.
Maybe you are looking for
-
I also have safari on my computer and if use it and go to the same website I can open the file. there is a similar message if I try to open the file with Preview.
-
No validation in BPEL server for XSLT
Hi there, I have set up an XSLT mapping from one schema to another, if my input xml is placed in the test tool on the JDeveloper then it succesfully validates the tranformation and shows an error. When the project is deployed the transformation occur
-
Cannot find some .TOC file in TDSHL homogeneous DB copy
We are at the import stage of a homogeneous DB copy for an ABAP only BW system. This homogeneous copy is a part of a TDMS shell creation. In import_monitor.log we see errors as follows: ERROR: 2010-12-29 21:55:19 com.sap.inst.migmon.LoadTask run Load
-
Powershell commands to change operating system image in task sequence
Hello, I am looking for a way to script changing a task sequence to use a different OS image file. So far the only thing I can find using the powershell MDT module is the "import-mdttasksequence" command, but it looks like that can only create a whol
-
Geturl to open at specific page width
how do I get the new window (mytestpages.html) to open to a specific width (600pixels). This is the script i have now and it works just fine but the page is full screen: on (release) { getURL("mytestpages.html", "_blank"); Thanks in advance