Can CHARM be setup to ignore Invalid  Component Version?

Hi Gurus.
Our SOLMAN Prod is on version 7.0 SP 25 and I'm trying to activate a new system to use the CHARM for transports.
Can CHARM be configured to take  u201Cignore Invalid  Component Versionu201D  as a default import option like  u201CLeave Transport Requester Queue for  later Importu201D?
Any suggestions?
Thanks,
Tess

Hi Tess,
Please check below note and link:
1581638 : SAP component checks no longer working in TMS
https://css.wdf.sap.corp/sap/support/notes/1581638
http://help.sap.com/saphelp_nwes72/helpdata/en/5c/d21880fe3c11d2b461006094b9ea64/frameset.htm
I hope this will help you.
Thanks
Regards,
Vikram

Similar Messages

  • Imports - EHP5 - Ignore Invalid Component Versions option

    Hello,
       EHP5 has introduced an additional option - "ignore invalid component version" import option. What is the code equivalent while using this unconditional mode option.
    tp import help says:
    U<nnn>                specify one or more unconditional modes
    <nnn>       umode digits, i.e. 0,1,2,..,9
    Which umode digit corresponds too  "ignore invalid component version"

    Hi,
    Meaning for the different unconditional modes with tp command:
    http://help.sap.com/SAPhelp_nw70/helpdata/en/3d/ad5b814ebc11d182bf0000e829fbfe/content.htm
    U mode 2 overwrite original objects could correspond to ignore component version option.
    Regards,
    Srikishan

  • How can i download setup for cs6? trial version?

    its for another pc. when i start download from adobe site,it gets installed in the system. i need the set up.

    Please download the setup again from Internet and keep a copy of it for future use.
    http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-download s.html
    Please download both files, Navigate to the directory where you saved the installation files and double-click the .exe(file1), this would extract the installation files.
    After the files finish extracting, the installer launches automatically. If it doesn’t, go to the folder that contains the extracted files. Double-click Set-up.exe to begin installation.
    Follow the onscreen instructions to install
    When prompted for a serial number, enter your serial number and complete the installation.
    Follow the instructions mentioned carefully.
    Regards,
    Ashutosh

  • Does not match component version

    Hi,
    We have four system landscape. We have already upgrade our DEV and ITT to EHP5.We still have to upgrade our UAT and prod to EHP5. When I see the transport queue on ITT system.I see all the transport that was imported on ITT before the upgrade is showing as "Does not match component version".
    I can understand that the version before the upgrade was different so it should show that message.
    I just wanted to check if this is normal or I need to make changes to TMS?
    Regards!
    Ravi

    Hi,
    You can do as follows:
    Switch it off with parameter : SP_TRANS_SYNC = OFF
    Procedure:
    Call transaction STMS
    Goto 'Systems Overview'
    Double click <SID> you wish to add the parameter to
    Goto 'Transport Tool' tab
    Goto 'change mode'
    Add  SP_TRANS_SYNC  to parameter column and OFF to value column
    Save, activate and distribute
    With Version SAP_BASIS 702 a new feature was added to the TMS system,
    tp is now checking the component version of the transport which was
    released and the component version of the system where the transport is
    going to be imported. If there is a difference, this difference is
    highlighted in the import queue (transaction stms_import) and if you try
    to import the transport, the import will stop with a warning message
    about the difference in the SAPCOMPONENT versions.
    If you wish to by-pass with warning then you can choose 'Ignore invalid
    Component version'.
    Regards,
    Aidan

  • How can I set the field ICt in component table of the Tasklist as "Input" ?

    Hi experts,
    How can I set the field ICt (BOM's Item Category (POSTP)) in component table of the Tasklist as "Input" Status (The system is in gray now).
    I can define the different Category value by IB01 or IB02,then I can select them at the Tasklist's component table.But sometimes I need batch input such as LSMW,so pls kindly tell me how to setup it,thanks!
    Yinjun

    Hi,
    BOM is created with some component and item category.
    In task list when you go to component, in normal case one selects and copies BOM over there by clicking component selection button.
    Once BOM is copied over there the BOM item category will get copied. As it is BOM item category in Task list it is greyed and it will get copied automatically from BOM.
    You specify item category required by you in IB01 or IB02 and then use that BOM in task list. Go to componenet tab and click component selection button. Once BOM is copied over there the BOM item category will get copied

  • How do i ignore invalid samples?

    In my application I read numbers off of a text file. What can i do to my code so that it ignores invalid data e.g negative numbers or letters
    import java.io.*;
    import java.net.*;
    import java.util.StringTokenizer;
    public class SurveyApp {
         public static void main(String[] args)     {
         try{
              String urlName = "";
              switch (args.length) {
              case 0: urlName = getURL();
              break;
              case 1: urlName = args[0];
         URL url = new URL(urlName);
         URLConnection connection = url.openConnection();
         connection.connect();
         BufferedReader in = new BufferedReader(new InputStreamReader(connection.getInputStream()));
         String line;
         line=in.readLine();
         int noOfPeople = Integer.parseInt(line);
         People people = new People(noOfPeople);
         while ((line = in.readLine()) != null)     {
         StringTokenizer st = new StringTokenizer(line,",");
         while (st.hasMoreTokens())     {  
         int age = Integer.parseInt( st.nextToken().trim() );
         float height = Float.parseFloat( st.nextToken().trim() );
         float weight = Float.parseFloat( st.nextToken().trim() );
         Person p = new Person(age, height, weight);
         people.add(p);
              if (line != null) System.out.println(". . .");
              System.out.println("The file used to supply the data was " +urlName);
              System.out.println("The total number of people surveyed was "+noOfPeople);
              System.out.println("The average age was "+people.mediumAge());
              System.out.println("The average height was "+people.mediumHeight());
              System.out.println("The average weight was "+people.mediumWeight());
              System.out.println();
         catch (FileNotFoundException e){
         System.err.println("This file cannot be accessed");
         catch (IOException e){
              System.err.println("Error: " + e);
         private static String getURL () throws IOException {
              urlInfo();
              String input;
              BufferedReader kbd = new BufferedReader(new InputStreamReader(System.in));
              System.out.println();
              System.out.print("Please enter a valid URL: ");
              input = kbd.readLine().trim();
              return input;     
    private static void urlInfo () {
    System.out.println();
    System.out.println("The URL should be of the format <protocl:resource>");
    System.out.println("Possible protocols are http: ftp: file:");
    System.out.println("E.g. for a web page: http://java.sun.com");
    System.out.println(" for a local file: file:c:/dir1/dir2/file.ext");
    } // end urlInfo function
    class People {
         private Person[] thePeople;
         private int noOfPeople;
         public People (int size) {
         thePeople = new Person[size];
         noOfPeople = 0;
         public void add (Person p) {
         if (noOfPeople < thePeople.length) {
         thePeople[noOfPeople] = p;
         noOfPeople++;
         public double mediumAge(){          
         int sumAge = 0;
         int numPeople = 0;
         for (int j = 0; j < thePeople.length; ++j)     {     
         if (thePeople[j] == null) continue;
         ++numPeople;
         sumAge += thePeople[j].Age();
         return ( (double) sumAge / numPeople);
         public double mediumHeight(){
         float sumHeight = 0;
         int numPeople = 0;
         for (int j = 0; j < thePeople.length; ++j)     {     
         if (thePeople[j] == null) continue;
         ++numPeople;
         sumHeight += thePeople[j].Height();
         return ( (double) sumHeight / numPeople);
         public double mediumWeight(){
         float sumWeight = 0;
         int numPeople = 0;
         for (int j = 0; j < thePeople.length; ++j)     {     
         if (thePeople[j] == null) continue;
         ++numPeople;
         sumWeight += thePeople[j].Weight();
         return ( (double) sumWeight / numPeople);
    class Person {
         private int age;          
         private float height;          
         private float weight;          
         public Person (int a, float h, float w) {
         age = a; height = h; weight =w;
         public Person (Person p) {
         age = p.age; height=p.height;
         weight=p.weight;
         public int Age()
         { return age; }
         public float Height()
         { return height; }
         public float Weight()
         { return weight; }
         public void print() {
         System.out.println("Age: "+age);
         System.out.println("Height: "+height);
         System.out.println("Weight : "+weight);

    I'm assuming you're talking about the following lines?
    int age = Integer.parseInt( st.nextToken().trim() );
    float height = Float.parseFloat( st.nextToken().trim() );
    float weight = Float.parseFloat( st.nextToken().trim() );
    Put a try-catch block around each. If/when you parse something with a letter, you'll get an error. After you determine that you have a number, then you can test it:
    if(age < 0)
      System.err.println("Age is not valid "+age);
    }

  • Setup error 530 invalid command line!!!!??

    hi guys,
    i have the following error in my addon installation process
    <i>"Setup error 530 invalid command line"</i>
    all my files .ard and setup.exe was generated correctly but whene i try to install my addon
    image capture
    http://aycu19.webshots.com/image/13218/2000674717812036508_rs.jpg

    Hi Manza,
    What are you using to create your setup?
    Have you tried the B1DE package? It contains 2 wizards to automatically create the setup of your addon together with the .ard file.
    You can try to use it at least to use it as a sample of what is needed for your setup.
    Are you setting something in the .ard Command Line arguments for installing/deinstalling your addon? Maybe the error is talking about it...
    Regards
    Trinidad.

  • How can we acess the data of one component into othr component in webdynpo?

    How can we acess the data of one component into other component in webdynpro....
    I need an Field input from one webdynpro component(comp1)  which is away from the line of process to the other component(comp2) we need that data........I mean i need the field info of comp1 where we doesn't navigate through the Comp1 in the portal & directly access the  component comp2.........kindly share your ideas.....and possible ways .........
    any doughts do post.....
    thanks in advance!

    Hi,
    Please post your query in forum Web Dynpro ABAP Forum, under Application server.
    You have to define the source component as in the used component in the target one to do that.
    after that you will be able to get data from that component.
    Regards,
    Vaibhav

  • How can we acess the data of one component into othr compnent in webdynpro?

    How can we acess the data of one component into other component in webdynpro....
    I need an Field input from one webdynpro component(comp1) which is away from the line of process to the other component(comp2) we need that data........I mean i need the field info of comp1 where we doesn't navigate through the Comp1 in the portal & directly access the component comp2.........kindly share your ideas.....and possible ways .........
    any doughts do post.....
    thanks in advance!

    Hi Reddy,
    You can do it in multiple ways. One way would be to try transfer the parameters through URL & the other would be to work with the concept of interface nodes. Please try go through these 2 threads ( [Thread 1|Call view of another WDA Component and pass the value to it; & [Thread 2|navigation from one program to another; )where I have explained about working with Interface node in detail. You can refer to this [thread |receving parameters between two standard webdynpro applications;to see as to how you can do the same via parameters in URL.  Hope it would help resolve your problem.
    Regards,
    Uday

  • Had to buy a new laptop and am trying to install XI (current and active licensee)....registration setup screen indicates ("Invalid Serial Number")

    had to buy a new laptop and am trying to install XI (current and active licensee)....registration setup screen indicates ("Invalid Serial Number")? Account is active.

    Is it by any chance asking for a "qualifying serial number"?

  • WLAN driver fails to install on G580 Windows 7 x64 with error "BCM4313: Can not find setup file"

    Summary:
    I have installed Windows 7 Ultimate x64 on my G580.  Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
    Details:
    I bought lenovo G580 with Windows 8.  Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64.  Everything is working fine but my WLAN card is not recognized because of lack of driver.
    The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
    I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error.  I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
    Error -  "BCM4313: Can not find setup file"
    Drivers Tried:
    - http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS028105
    - http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS028208
    Any help about how to get past this error will be appreciated.  The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder.  Let me know if I can copy a specific file from there.
    Thank you.
    BJS
    Solved!
    Go to Solution.

    Download this driver bcm4313
    Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
    And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine.

  • EHP5 Stack File is invalid: component 'EA-HR' (stack release 600 source .

    Hi all . . .
    Attempting to install EHP5 on ERP ABAP stack. Currently on EHP4 SPS5.
    During the configuration roadmap step, the Stack configuration overview told me that "for the following components, a Component Upgrade/Installation and/or Support Packages will be included according to the selected EhP stack configuration . . . " and it proceeded to list the various compoents and their intended releases. During that, I did take note that it wanted to move EA-HR to 600 SPLevel 0059 . . . I was surprised by this, yet I pressed on.
    Now, during the Information Gathering phase (PREP_EXTENSION/SUBMOD_EXTENSION_NEW/EHP_INCLUSION) I received the error:
    Last error code set: Stack file is invalid: component 'EA-HR' (stack release 600 < source release 604)
    I understand that it is trying to tell me that the component is trying to install a release lower than what is already installed. The problem is, I do not know how to go about fixing it.
    Any suggestions?
    Thanks,
    Bryan Montgomery

    Hello Bryan,
    I believe the best and fastest way to have EA-HR upgraded to 605 is to unselect this usage type in MOPZ, regenerate the XML without it, upgrade the rest of the system to EhP5 level and, afterwards, upgrade only EA-HR to 605 level using SAINT.
    Please make sure to check the EHP5 manuals:
    http://service.sap.com/swdc
      -> Ramp-Up Releases and Beta Software
        -> Installation and Upgrade
          -> EHP5 FOR SAP ERP 6.0
           -> Technical Documentation
    and these notes:
    #1323537 - Release Info SAP Enhancement Package 5 for SAP ERP 6.0
    #1304648 - SAP ERP Enhan.Pk.5 SP Stack 01(10/2009) - Release Information Note
    Best regards,
    Tomas Black

  • How can I get rid of an "Invalid URL" message?

    How can I get rid of an "Invalid URL" message?

    rosarian --
    Welcome to Apple Discussions.
    Glad you found us.
    We're all volunteers here, sharing solutions.
    Carolyn & Linc will help you.

  • Can't execute setup.exe on PDA

    hi, i'm testing simple example with Oracle817 and 9i lite database..
    my problem is that i can't execute setup.exe on my PDA...
    i packaged new application by only importing scott.emp tabale with wtgpack.exe
    then i set user priviledge and parameter in the mobile server control center web page..
    i downloaded mobile client for wince on strong arm cpu...
    while i packaged mobile application there was no exception or error messages..
    but i can't execute downloaded setup.exe file for installing mobile client.. though..
    only it's not proper wince application sign can be seen on PDA..
    PDA that i use is with strong arm sa-1100 cpu and windows CE 3.0(build 126)..
    but it's not compaq or any other well known product though..
    anyway.. anyone had this kinda situation..?
    please help me out..
    thank your in advance..

    When I turned my computer on I had the setup.exe shortcut on my desktop (0 bytes), and can't delete it.
    good lord. this is precisely the second time i've ever seen this reported. (the other chap i saw with this ended up with two such icons on his desktop, if i remember correctly.)
    Katrina: am i remembering this correctly?
    what eventually worked for him was downloading and installing a copy of Pocket Killbox, which he eventually managed to use to get rid of the beasts.
    keep us posted.
    love, b

  • How can I make a chart ignore cells until their value is changed from 0?

    In the corresponding table, I used conditional formatting to hide zeros in the highlighted row by conditionally changing the text color to that of the table background. However, the zero value's are still represented in the corresponding chart as you can see in the attached photo . How can I make the chart ignore certain cells only until their values are changed from zero? Thanks in advance!
    Ryan

    Hi Ryan,
    Leave the cells empty until they're needed, or, if the cells' contents are determined by a formula, revise the formula to insert a null string if the value is zero.
    =IF(your formula = 0, "", your formula)
    Regards,
    Barry

Maybe you are looking for