Can connect to my airport express but not able to get email or internet?

Hi just got the airport express and my iphone connect to it but cant get any email og go on the internet?

Please try a full, extended modem reset and power cycle of the network as follows:
Push the reset button on the modem (if present)
Power off the modem
Pull the battery (if easily accessible)
Power off all other network devices, order is not important
Wait at least 30 minutes
Make sure the Ethernet cable from the modem is connected to the WAN port (circle of dots icon) on the AirPort Extreme and re-install the modem battery if it was removed
Power up the modem first and let it run for 4-5 minutes by itself
Power up the AirPort Extreme the same way
Power up each device one at a time about a minute apart
Check for operation
If problems continue, I would have the device checked out at the Apple store.

Similar Messages

Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Plz advise.

Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Please advise.

If you have not already done so, I suggest that you temporarily disconnect the Ethernet cable from the AirPort Express that goes to the Tivo box.
Instead, turn off the wireless on a laptop and connect the laptop to the Ethernet port on the Express. See if you can get an Internet connection on the laptop.
If you still cannot get an Internet connection on the laptop, try another Ethernet cable that you know is working correctly.
Post back on your results.

Any suggestions on how to get wifi to work? I have a multitech router and can connect with a computer wirelessly but not the ipad.

Any suggestions on how to get wifi to work? I have a multitech router and can connect with a computer wirelessly but not the ipad.

iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398

Can connect to Airport Express but not to the internet

Please help
My Airport Express shows the solid green light. I am also able to connect to it and use AirTunes on my HiFi.
However I cant connect to the internet. If I plug in my laptop to the router directly the internet works fine. So it is not a router problem.
Any idea?

After following your instruction, I am not able to connect to the airport express anymore. I can still see the network but it is somehow unable to read the IP address.
When I try to get to the Airport utility it shows the base station but do not let me get into the configuration and shows an error message -4.
The only option I have then is to reset the AE

I can stream from ios to new airport express but not from windows 7 or powermac G5

I have new airport express and older apple tv on my network. Both are connected and found by all devices - Windows 7 laptop, Powermac G5 and all ios devices. I can stream music via airplay to both airport express and apple tv from ios devices (one at a time of course). I can stream from itunes to Apple TV but cannot connect to the airport express! It shows up and I get the dredded error: An error occured while trying to connect...
I tried some of the many ipv6 suggestions that I've seen here but nothing is working.
Anyone have the setup? Is this an airport express setup issue? Please help!!!

OK, I'm tipping my hat to Apple's (new) online experts. Great job.
They might be able to solve YOUR problem, too. Find them at:
http://www.apple.com/support/expert/

Stream music/radio via airport express' but not using itunes

Hi,
I currently have 2x airport express in different rooms and I stream music etc from my itunes to them (via my airport extreme basestation). Is there any way I can stream net radio or music from other apps to it? E.g. I'd like to listen to the bbc radio player on my stereo, but it is only connected wirelessly to my airport express.
Being able to do this would make my mac experience near perfect!
Thanks!

Hello andypandy9999. Welcome to the Apple Discussions!
Yes, check out Rogue Amoeba's AirFoil.

HT5787 i have logged in my account but not able to verify email

i have logged in my account but not able to verify email

Do you mean that (a) you do not receive the the verifcation email, (b) the verifcation email does not have a working link in it, (c) the webpage at the address of the link in the verification email is not responding, (d) after typing in your Apple ID and password to verify your email address, the webpage does not respond, or (e) the Apple ID and password combination you are using to verify your email address does not match what Apple has on records.
(1) If (a), check your junk folder for the email. If it is not there, see 2..
(2) If (b, c, or d), then you might simply try later. The webpage could be have a temporary issue.
(3) If (e) use the expresslane to resolve password issue: https://expresslane.apple.com/GetCountriesDetails.do
All the best!

Not able to get Email Notification even after did all the steps in MDS

I have set simple Human Workflow : If new product come, then email will go to one of the user and get the approval from that user.
For that I created 2 Entities Called Product, Product Status. I have set the Business rule like if the New product has come, then the Product status will be ' Pending for review'. And I selected one of the user in Notification Column in Business Rule Management
Page.
From back End, I have set the data base mail profile and updated the column MDMRootURL with 'My MDS URL' in tblsystemsetting table.
But Still I didnt get Email Notification. What I have missed in this process. Please help me out in this regard. Thanks!

Hi Raji,
Have you any log information regarding this issue? If so, please post the log to us for further investigation(Right click on Database Mail, and select View Database Mail Log).
-- list log events
SELECT * FROM msdb.dbo.sysmail_log
GO
-- list error messages
SELECT * FROM msdb.dbo.sysmail_event_log
WHERE mailitem_id >= 1;
Here are some good articles regarding troubleshooting database mail for your reference:
Troubleshooting Database Mail: General steps:
http://technet.microsoft.com/en-us/library/ms187540(v=sql.105).aspx
Troubleshooting Database Mail:
http://technet.microsoft.com/en-us/library/ms188663(v=sql.105).aspx
Hope this helps.
Elvis Long
TechNet Community Support

Airport Express I can connect to my wireless network but not the internet.

The computer I set up my Airport express on works fine. But my other laptop in my house connects to the network but not internet. Why is this?

i was having the same issue with all my devices. everything would cut out and i would have to reboot my router...my internet service provider is ATT and i have a Uverse router. i went to their online support and i was able to chat with a tech support agent and they ended up changing the channel of my router and that has resolved my problem....i am currently steaming pics from my iphoto library to my apple tv and my wife is streaming music from her iphone at the same time...support tech stated that usually they have the router set to a generic channel that usually has a lot of traffic.

Ipad connects with Airport Express, but not wireless router

I have a airport express that exends my network and is connected by an ethernet cable to the wireless router. they are on opposite sides of the house from each other. every other device i own has full bars wifi anywhere in the house. but the ipad only seems to find the signal from the AE.
If i go in the bedroom with the wireless router, the signal drops to 1 bar. if i unplug the AE along with all the other electronics for the TV/Receiver at night, the ipad loses the signal and cannot get a signal from the router, standing right next to it. i have tried reset, hard reset, renew lease forgetting network, and all fails. any ideas?
I have a Verizon Ultraline series 3 model A90-9100EM15-10 and the firmware is up to date.

Disclaimer - For me the Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture very different from that found in most 1st world nations, such as that in the two dominant North American countries. Written language has no tone. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
You likely have your reason for extending your network in this manner, but it seems that the AE is not really extending your router's network, but creating its own separate network that then extends your internet connection. This can be confusing to devices if you are expecting that they will switch between the two of them automatically.
The iPad can only support one connect at a time. It sounds like you want it to be able to jump from the AE connection to a router connection on a whim when signal strength drops. I am not sure that the iPad's radio is that sophisticated. At best when the iPad looses a signal it could ask if you want to join any other network that it detects, especially if it has connected to that network in the past.
AFA the router, some routers don't like iOS devices and just won't connect. When you go to Settings/Wi-Fi does the iPad see the router's network? If the iPad sees the router network, try configuring a connection by hand.
Tap Other... and write the name of the router's network. Tap Security and select the type of security the router's network employs. Return to the previous pane and enter the password. Tap Join. If you can make the conection the iPad should remember this network in the future. Turn on Ask to Join Networks and hopefully when the iPad looses the AE signal in the future it will then ask you if you want to join the router's network.

Can I use a Airport Express and a Foscam IP camera without a internet connection?

Hi All,
I have a Foscam FI8918W IP camera. I have it working perfectly at home on my local network over wifi with either my Airport Extreme or my Airport Express.
I planned to use this IP cam as a wireless camera for on stage work with bands, monitoring equipment that I can't see during the show utilising the Airport Express, my MBP or iPad.
As I have said, i have everything working very well, until I disconnect the Airport Express from the mains power and remove the CAT5 cable from my modem to the A.E. When I reconnect the power (but not the internet connection), I get error messages from the IP camera software that the Subnet mask settings are incorrect.
I cannot get the camera to work until I reconnect the internet connection. After a few moments, the issue's are resolved and everything starts working again and I can view the camera's video feed from an i.p. address.
Question is: Is there a way to set up the A.E. so that it doesn't require a internet connection?
I will not have internet at a lot of venues and need to get this to work just as a stand alone setup.
Thanks in advance!
mark

I'm not sure I quite understand. Do you wish to use the AEX to provide a wireless connection for a device that has an Ethernet port but no wireless capability of its own? You wish to use it in place of a wireless card that isn't internally installed? If so, the answer is, "Yes." It will work as a wireless access point. But you must have an extant wireless network because the AEX won't have an Internet connection when used in this way.
If you have an existing wireless network with a wireless router connected to your cable/DSL model or your modem is a wireless router as well, then the AEX may connect to it in bridge mode. Note that AEXs don't always play nice with non-Apple routers. Some work; others don't.

My PC can connect to the airport extreme but with encryption it cannot connect to the internet my iMac has no issues, any help.

My PC can connect to the new airport extreme I just purchased but with encryption it cannot connect to the internet my iMac has no issues. If I open the airport exteme up and provide no security everything is fine which leads me to believe it is something with the encryption between the two devices. Not sure what step I'm missing here this shouldn't be this difficult.

Sorry, I should have been more clear. I am asking if the DNS IP addresses, not the IP addresses assigned by the DHCP service, are the same. DNS is like the Internet's version of the Yellow Pages. Your ISP typically will provide them to you or you can elect to use those provided by another source, like OpenDNS.
DNS is the service that translates a website's URL to its actual IP address so that you can access it. I am just trying to rule out that the PC is not configured properly with the correct DNS IP information.
The other thing to check is if the PC is configured to use a Proxy service. By default, it would not be.
Finally, what is the make & model of the PC. More importantly, if the PC is using either a PCI or USB wireless adapter, what is its make & model?

Can connect to wireless on Windows but not Mac OS?

I can connect to my wireless network on my newly boot camped Windows XP. However, now I cannot connect to it on my Mac OS X. I have 10.6.8. I can see my wireless network, it doesn't have a password and everytime I try to connect it attempts but then says the connection timed out. Help?

You need to check the setting for the "Automatic" location. Try this:
System Preferences > Network
Select the AirPort from the left hand side
Click on the Locations combo box and select "Automatic"
Click on Advanced
Select the AirPort tab and enter your network name. Delete all other named networks
Select TCP/IP tab.
Configure IPv4 Using DHCP
Now click on Renew DHCP Lease. After a few seconds you should get an IP address (probably 192.168.x.x)
Click on Proxies tab.
Select Auto Proxy Discovery and Use Passive FTP
Click on OK and Apply, etc.
Bob

ITunes recognizes one Airport Express but not the other

I have two Airport Express and have updated both with V6.3. Now when I try to connect iTunes to the stereos to which they are connected, one works fine, the other says "The remote speaker is not compatible with this version of iTunes. I'm running iTunes 6.05.
Any ideas?
Thanks in advance.

Answered myself. Both Airport Express were sharing the same IP address. Changed one over and now everything works fine.

I have 2 routers in my set up. The COX internet is hooked into the dlink and then an airport express is off the dlink router. I can password protect the airport express but have been unable to password the dlink. I've been into preferences. Doesnt wor

I have a dlink hooked to the cox cable and then an airport express to the dlink. I am able to password the airport but not the dlink. I;ve tried the preferences mode and it won't take. HELP

As you might imagine, this is a support site for Apple networking products.
Did you have a question about an AirPort Express?
If you need help with a D-Link product, you should post your question on a D-Link support site like the one below:
http://www.iyogi.cc/routerlp/5621063/Router/d-link-router-support.html

Can connect to my airport express but not able to get email or internet?

Similar Messages

Maybe you are looking for