Can data be passed to an external web server using the "in-course web browsing" feature in ver. 7?
Can data be passed to an external web server using the "in-course web browsing" feature in ver. 7? I would like to display a simple web page, and I would like to pass to that web page the answers to all the quiz questions, quiz score, etc. In other words, instead of passing quiz results to a SCORM-compliant LMS like Moodle, I'd like to pass that data to a Drupal Webform using a URL like:
https://www.example.com/my-drupal-webform?param1=value1¶m2=value2...¶mn=valuen
Is this possible?
Thanks,
John
You have to make sure every step in MOS Document ID 726414.1 that is applicable to your E-Business Suite 12.1.x release is performed. Enabling ASADMIN is just one of the steps. In spite of following all the steps in this Document you continue to get the error when clicking "Generate WSDL", please log a Service Request with Oracle Support.I will check all steps again. Maybe I missed one... Thanks!
Similar Messages
-
I am hoping to improve my method of publishing my company
Knowledge Base.
Currently, I generate the RoboHelp layout to a folder on my
local computer and then manually upload the project output files to
our sever via SmartFTP. My question is how do I publish directly to
the server? Is this possible?
On the first page of the Generate Primary Layout "wizard", I
have entered the path to a local folder on my computer. Three
screens later in the Servers box of the "wizard", I have entered a
server and path, and checked its box. When I generated the output,
I expected it to be published to both locations: the local folder
and the web server folder. But it only publishes to the local
folder, not the web server.
How do I get it publish to the server also?
Any help is much appreciated. Thanks!
~BethI had been using the HTTP setting, so switched to FTP and
filled in server info. This time the Publish function began
working! However, the process has since hit a snafu.
Certain files are causing errors and I'm getting a message
such as this one:
Publishing has been cancelled. Failed to create file: image
235.jpg
When I click OK to the first error message, I then get this
one:
Publishing has been cancelled. Failed to create file:
bsscftp.txt
After clicking OK to the 2nd error msg, the Publish fails and
I get this:
Warning: Failed to publish to "help". reason: Canceled by
user.
I have run through the Publish a couple times now and various
files cause the 1st error, but the 2nd file is always that same txt
file. I realize this snafu may be particular to my situation but
any ideas? -
base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1i need to pass data from an Access database to Teststand by using the built in Data step types(open database /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1
When I tried the same thing on another cmputer the same thing
happend
appreiciate u"r helpbase /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1Hello Kitty -
Certainly it is unusual that you can still see the tables available in your MS Access database but cannot see the columns? I am assuming you are configuring an Open Statement step and are trying to use the ring-control to select columns from your table?
Can you tell me more about the changes you made to your file when you 'changed' it with MS Access? What version of Access are you using? What happens if you try and manually type in an 'Open Statement Dialog's SQL string such as...
"SELECT UUT_RESULT.TEST_SOCKET_INDEX, UUT_RESULT.UUT_STATUS, UUT_RESULT.START_DATE_TIME FROM UUT_RESULT"
Is it able to find the columns even if it can't display them? I am worried that maybe you are using a version of MS Access that is too new for the version of TestSt
and you are running. Has anything else changed aside from the file you are editing?
Regards,
-Elaine R.
National Instruments
http://www.ni.com/ask -
After restoring my iphone 4 to factory settings, then restoring from a recent backup, my phone will reboot but keeps coming back to the "new setup or restore from backup screen". How can I by-pass this screen to go directly to the sync apps/music screen?
Well, it's certainly behaving as though the phone that was backed up was synced to a different iTunes library.
I'm going to throw one more thing out there... Yes, you backed it up to this computer... Was the phone previously set up to sync with this computer? Or was it syncing with a different computer and you just backed it up to this one?
You may have to end up setting it up as a new device and rebuilding the phone by manually re-syncing your data, apps, music, etc. to the phone.
Trying to keep your library on a different drive can be tricky. If iTunes starts up and the library isn't available, it may end up generating a new library ID, meaning that you could easily find yourself in exactly the position you're in now...
I'm curious why there was a need to restore your phone to begin with... It may not have any bearing on this at all, but it could. -
IS there any way i can make something appear on the external
screen or use the camera or microphone?Hi. Sorry, but isn´t this something that has been around forever?
Regards
Lars @ søgemaskineoptimering -
I can't download any software using the built in web browser. Any ideas?
Hey hey! Thanks in advance for everyone's help.
I just got a new Treo 755p for Verizon. I can't seem to download any software using the built in web browser. When I initiate the download it sits on the download screen and does nothing. I've tried several sources of software all resulting in the same thing.
Could it be settings on the Treo itself? Not sure! Any ideas would be greatly appreciated.
Sincerely,
Minnesota Mike
Post relates to: Treo 755p (Verizon)Hi, and welcome to the Palm Community Forums.
Where are you trying to download the applications from, and what file format are they?
Do you have an expansion card installed?
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android -
Do I need to purchase an iPad with cellular to use imaps or can I purchase an iPad with wifi only and use the data connection on my iPhone.
My aim is to have maps on the bigger iPad screen.the wifi version don't have an gps chip
-
after i bought mac os x lion from web then download , after that to install but when they ask me to choose disk to install i can not choose, it say this disk does not use the GUID partiton table scheme. use disk utility to change the partition scheme. but
after i bought mac os x lion from web then download , after that to install but when they ask me to choose disk to install i can not choose, it say this disk does not use the GUID partiton table scheme. use disk utility to change the partition scheme. but
-
Can you manually add data to Nike + or do you need to use the Nano?
Can you manually add data to Nike + or do you need to use the Nano?
What if you are on a trip and forgot your Ipod. It would be great to be able to add lost data. or even edit the Ipod data on the Nike + websiteHi Hrbrmstr,
That will be very cool if you can create an xml file
that will allow us to add runs and edit runs on the
Nike+ site! The trick may be getting past the server
dragon which sends out a warning saying, "Your
workout data could not be sent to nikeplus.com
because the data could not be accepted by the server"
when it does not like the data it is sent.
For example, my runs that did not post had something
in common: when I read these xml files with TextEdit,
both have a line that says,
"<stepCounts><walkBegin>0</walkBegin>". There's also
a line that tracks steps run. It also said zero. Of
course, these lines should NOT read zero, because I
was not starting at zero steps! My guess is that this
anomaly makes the Nike+ server either reject or
delete these runs because the step count does not fit
my other runs.
Well, I'll leave this stuff to someone who knows more
than I. Glad you're here.
For jackt123, the longer is answer to your question
is that certain things that are not doable now may be
doable in the future. Stay tuned.
I just got the dragon today. "Your workout data could not be sent to Nikeplus because iTunes received an unexpected response from the server. Please try again later." Did you ever find out why this happened to you? I went on nikeplus and it did in fact upload my latest run. Now my goals are blank on nikeplus. -
can i buy a smaller macbook air (64gb) but use the time capsule for additional data ?
If you plan to store important "original" or "master" files and documents on the Time Capsule, then you might want to think about a way to back up those files to another hard drive.
Why? If the Time Capsule has a problem...and you have no backups....you lose everything. -
Can I conect and read my files form an external storage device, using the USB conection, on an I-pad2
The camera connection kit USB connector can only be used for import of photos & videos. Can't be used for export of any files.
Cheers, Tom -
Connect to SharePoint web service using the XML / Web Service connector
Hi experts,
I am currently trying to display my SharePoint list in Crystal Report. Therefore my plan is to use a SharePoint web service to get the data and paste them to the Crystal Report.
Is it possible to use the "XML and Web services" connector of the Crystal Reports database expert?
When I enter the web service URL, for instance:
https://[url]/_vti_bin/lists.asmx?wsdl
and click next... I have to enter the web service credentials.
On the next page I have to enter Service, Port and Method.
Do I have to enter the service URL again here?
What If, there is no port? Can I leave that field empty?
I know the methods, but where can I add the mandatory parameters?
Thanks for any helps and comments!
SebastianHi Ananth,
thank you, but this document does not help at all.
We are using Crystal Reports 2008 SP2.
We want to use the Web Service Connector.
What I need is more informationen about the Web service connect. For example - the connection in Microsoft InfoPath is much easier - there I don't have to enter a port and can choose the methods from a list.
Is it possible to use the Crystal web service connector for MS SharePoint Webservices?
Or must I use the Crystal SDK to carry out a connection?
Best regards,
Sebastian -
Search help for Web Dynpro using the SAP-search help
Hi,
Im trying to create a generic search help for Web Dynpro using the SAP-search help. It should working so, that I construct a Web Dynpro-component, that gets the data of the search help from the SAP-system, interpreted it and creates the ui-elements and the needed context generic.
The mapping between the Input field of the customerview and the right search help is to be made with an xml-file, which contains the information: name of the view, the input field, the search-help-name and the name of the field that will be returned.
The xml-file is reading from a helper-class. That helper-class contains any information, witch need the search help-component as well as the customer-component.
The initialization takes place in the method wdDoModify of the customer. The call of the search help from the customer should be implement with an Action, witch is bound to a Button(create dynamic in the helper-class behind the input field).
In a second foot should be create a plugin for eclipse, witch insert the used files (search help component, helper class, ) in the project. In addition it should create the call in the customer generic.
It would be great if someone can give me a feedback!Hi Mike,
The BlanketAgreement.exe is a reference to the executable that will be created when you compile the solution you created in Part II - Part III. I think there is a mistake in the tutorial because it asks you to name the project 'Blanket' which means that by default the executable will be called Blanket.exe and not BlanketAgreement.exe. The tutorial also misses the step asking you to compile the Blanket project before you go on to create an installer. You should compile your Blanket project in Release mode before creating an installer. By compiling the project you'll get a Blanket.exe file in the bin folder of your Blanket project which you then need to add to the installer per the instructions.
SAP do offer development courses in some areas and there is training material here on the SDN and on the SAP partner portal (and maybe the customer portal as well). Try searching this forum for 'training' or 'tutorial' and you should get a few links. There's also a development certification.
Personally I'd recommend you give yourself a little project to work on and just get stuck in
Kind Regards,
Owen -
Error on live web server - Retrieving the COM class factory for component
I've had a good read of this forum and can't find the answer to this particular issue. Everything works fine until I upload my vb.net/crystal reports solution to my live production web server. The error I get when I try to open a Crystal Report from the web is:
Retrieving the COM class factory for component with CLSID {059AC10F-0010-4C43-8876-1FC7BEAF218B} failed due to the following error: 80070005.
It is the following line of my VB.net source code that causes the error.
Dim oRpt As New CrystalDecisions.CrystalReports.Engine.ReportDocument
I've installed CRRuntime_12_0_mlb.msi to my Windows 2008 / IIS7 web server (This is a 64bit server).
The website works fine on a 32 bit system but on this new server I keep getting the above errors.
I've tried resinstalling the crystal reports numerous times and restarting. I've also tried installing the SP2 version of the CRRuntime and still get the same errors.
I've added read/write permissions to Windows/Temp directory for Network Service.
I've tried to manually register sacommlayer.dll which registers correctly.
The website is not compiled into a binary, the aspx.vb files are simply uploaded to the webserver and compiled on the fly by the server.
I've tried to add <identity impersonate="true" userName="MACHINENAME\administrator" password="PASSWORD" /> into the web.config file to see if this gets any further.
It does however then errors on the following VB Line.
oRpt.SetDataSource(dsSWMP)
with the error
Failed to load database information.Error in File crSitewasteManagementPlan {BEC6811A-D612-4ED6-9AF7-B0C9BED7A966}.rpt:
Failed to load database information
I've also tried opening up the C: / D: drives to the NETWORK SERVICE account with full control (temporarily) to see if I can get past the errors, however this has not worked for me.
Any other ideas to why this might not be working? Ideally I would not like to be using the identity impersonation at all.
Kind Regards
JamesDear Ludek,
I have tried manually registering the sacommlayer.dll already however this didn't make a difference.
I have checked versions of this DLL between the 2 servers and they are the same. (v12.0.0.683)
Find below the logs from process monitor for the 64 bit server.
It definitely shows where it is failing.. any suggestions to fix it?
I can email more detailed logs if you supply me with your email address.
Kind Regards
James
processes from erroring 64 bit server
00:28:46.6463180 w3wp.exe 3948 RegOpenKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B} SUCCESS Desired Access: Read
00:28:46.6463685 w3wp.exe 3948 RegOpenKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\TreatAs NAME NOT FOUND Desired Access: Query Value
00:28:46.6463935 w3wp.exe 3948 RegQueryKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B} BUFFER TOO SMALL Query: Name, Length: 0
00:28:46.6464137 w3wp.exe 3948 RegQueryKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B} SUCCESS Query: Name
00:28:46.6464472 w3wp.exe 3948 RegOpenKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\Progid NAME NOT FOUND Desired Access: Query Value
00:28:46.6464701 w3wp.exe 3948 RegQueryValue HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\(Default) SUCCESS Type: REG_SZ, Length: 54, Data: InProcAdapterMonitor Class
00:28:46.6464924 w3wp.exe 3948 RegQueryValue HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\(Default) SUCCESS Type: REG_SZ, Length: 54, Data: InProcAdapterMonitor Class
00:28:46.6465262 w3wp.exe 3948 RegOpenKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\InprocServer32 SUCCESS Desired Access: Read
00:28:46.6465561 w3wp.exe 3948 RegQueryValue HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\InprocServer32\InprocServer32 NAME NOT FOUND Length: 144
00:28:46.6465759 w3wp.exe 3948 RegQueryValue HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\InprocServer32\(Default) BUFFER OVERFLOW Length: 144
00:28:46.6465958 w3wp.exe 3948 RegQueryValue HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\InprocServer32\(Default) BUFFER OVERFLOW Length: 144
00:28:46.6466137 w3wp.exe 3948 RegQueryValue HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\InprocServer32\(Default) SUCCESS Type: REG_SZ, Length: 196, Data: C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sacommlayer.dll
00:28:46.6466339 w3wp.exe 3948 RegQueryValue HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\InprocServer32\ThreadingModel SUCCESS Type: REG_SZ, Length: 10, Data: Both
00:28:46.6466578 w3wp.exe 3948 RegCloseKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\InprocServer32 SUCCESS
00:28:46.6466904 w3wp.exe 3948 RegOpenKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\InprocHandler32 NAME NOT FOUND Desired Access: Query Value
00:28:46.6467217 w3wp.exe 3948 RegOpenKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\InprocHandler NAME NOT FOUND Desired Access: Query Value
00:28:46.6467441 w3wp.exe 3948 RegCloseKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B} SUCCESS
00:28:46.6468194 w3wp.exe 3948 RegOpenKey HKU\S-1-5-21-3073440563-3662229771-834689312-1170_Classes\Wow6432Node NAME NOT FOUND Desired Access: Maximum Allowed
00:28:46.6468529 w3wp.exe 3948 RegOpenKey HKCR\Wow6432Node SUCCESS Desired Access: Maximum Allowed, Granted Access: Read
00:28:46.6468904 w3wp.exe 3948 RegOpenKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B} SUCCESS Desired Access: Read
00:28:46.6469158 w3wp.exe 3948 RegCloseKey HKCR\Wow6432Node SUCCESS
00:28:46.6469458 w3wp.exe 3948 RegOpenKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B}\TreatAs NAME NOT FOUND Desired Access: Read
00:28:46.6469678 w3wp.exe 3948 RegCloseKey HKCR\Wow6432Node\CLSID\{059AC10F-0010-4C43-8876-1FC7BEAF218B} SUCCESS
00:28:46.6471878 w3wp.exe 3948 QueryOpen C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sacommlayer.dll FAST IO DISALLOWED
00:28:46.6473271 w3wp.exe 3948 CreateFile C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sacommlayer.dll ACCESS DENIED Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
00:28:46.6476098 w3wp.exe 3948 CreateFile C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sacommlayer.dll ACCESS DENIED Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a
00:28:46.6478526 w3wp.exe 3948 QueryOpen C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sacommlayer.dll FAST IO DISALLOWED
00:28:46.6479856 w3wp.exe 3948 CreateFile C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sacommlayer.dll ACCESS DENIED Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
00:28:46.6482284 w3wp.exe 3948 CreateFile C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sacommlayer.dll ACCESS DENIED Desired Access: Read Data/List Directory, Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a
00:28:46.6484770 w3wp.exe 3948 CreateFile C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sacommlayer.dll ACCESS DENIED Desired Access: Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a
00:28:46.6489837 w3wp.exe 3948 QueryOpen C:\Windows\SysWOW64\inetsrv\w3wp.exe.config FAST IO DISALLOWED
00:28:46.6490819 w3wp.exe 3948 CreateFile C:\Windows\SysWOW64\inetsrv\w3wp.exe.config NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
sacommlayer.dll 12.0.0.683
Edited by: sw1sher2 on Feb 18, 2010 1:55 AM -
Attach doc from external content server- using Generic Object Service (GOS)
Dear All,
i have intergrated an external content server to SAP using SAP archive link. All the scanned document are there in Content server and corresponding entries are done in SAP.I can search and view document using tcode : OAAD
Please tell me steps for "how to attach a document from external content server using Generic Object Service "
Scenario is : For example when we change any Master records or create a new PO, or do some financial transaction then i need to attach the supporting document which is there in my content server connected to SAP.how do we manual attach a Document in SAP using GOS.
Do we need to do some special configuration to use GOS .please give the steps from initial.
Thanks
sandeepHello,
Check your configuration of document type assignement to required business document - object type, Archivelink table, content repository in OAC3 transaction.
Goto respective business document > Click on GOS > Create > Store business document - Here you can see defined document type with desctiption. Double click on this the assign your document to this business document. Save it.
This will help in attaching the document to your required business document.
To verify you can check the archivelink table or by transaction OAAD.
Hope this will help you.
-Thanks,
Ajay
Maybe you are looking for
-
I have tried everything to get the program to see my printer. By reinstalling divice drivers for printer to reinstalling program several times. Still I can print from my printer but not scan. Any help would be appreciated.
-
I am having problems transferring my downloaded purchased from my iPhone even after following instructions! Can someone please help!!!??
-
How to Compare two strings in PL/SQL
Hi All, I need to compare two strings whether they are equal or not in PL/SQL.Is there any function to comparing the strings.
-
Syncing Ring Tones & 12 days of Christmas
Help Help Help, I downloaded various items from the 12 days of christmas and also bought a ring tone from Itunes. All was fine until I connected the phone to the pc to get some photos from it. Once I went back in the ringtone had gone along with all
-
Connection iBook to DVI monitor, how to connect?
Hey people! The question in subject. Just wanna add that if somebody experienced using Apple Mini-DVI to DVI Adapter? Thanks, Ivan iBook G4 1GHz 12 Combo Mac OS X (10.3.9)