Can device run multiple encryptions at the same time?

I have a G5 at home and I'm considering hooking up a new Airport Extreme to enable wirelsss access from my work laptop (WIN PC). I use a Netgear 54MBPS Wireless PC card WG511 v2 which supports 128bit encryption. Should this work with the mac APE and if so can I also run other encryption modes at the same time in future if needed. I will be connecting the APE to my cable modem and using one of the LAN ports to connect to the G5.

Thanks Don, at this stage I'm only using the Netcomm wireless but maybe in future I might go for the iTV or add another computer.
Rob

Similar Messages

  • Can you opening multiple albums at the same time in Photo (not iPhoto)?

    When converting the iPhoto library to Photo most of the albums that were in place in iPhoto converted to albums in Photo . . . .but not all. Some were retained as events mainly those that were folders within an album. In order to move them to the right album I would like to have multiple albums open at the same time (side by side) so that I can make sure not to duplicate photos or move them to the wrong spot.
    I cant see how to do this, it seems that I can need to open one album and check phots and then close to look within and other and rely on memory. There must be a more efficient and accurate way to do this?

    All of the events in iPhoto were converted to albums and are located in the Folder titled iPhoto Event in the sidebar of Photos. 
    You can't open multiple albums at the same time.  You can create a smart album that will do essentially the same thing with the following criteria:
    Album is "A"
    Album is "B".
    The smart album will display all of the photos in those two albums.

  • In Elements 7.0, how can I delete multiple photos at the same time?

    In Adobe Photoshop Elements 7.0, how can I delete multiple photos at the same time?   Please be a little specific so I can follow your instructions as I'm not real smart at computers; I'm an intermediate user.  Thank you.

    Shift-click the photos or Ctrl-click them to select them, then right-click one of them and choose Delete from Catalog. They will all go together.

  • Can i run two widgets at the same time on the same page?

    Can i run two widgets at the same time on the same page?
    Hi
    I have created and published 4 free ibooks and i would to run two widgets
    - a countdown clock
    - a review test
    at the same time on the page. Can i do that?
    Thanks in advance
    Haris

    thanks for your answer. Yes indeed HTML widgets run only full screen (snif snif). I consider this as a "distinguishing treatment".
    One solution  i read !!!!! was to create through keynote a countdown clock, to export to quicktime move and to imported at iBA predefined widgets. of course this is not the solution i need.
    So, in order to have at the same widget and run together a count down clock and a preview test (20 questions)  i must
    1)"hack" the preview widget and insert a countdown clock
    2) create a preview test using iAD.....
    thanks again
    haris

  • Can I export multiple folders at the same time, keeping the album structure

    I'm exporting all of my photos from 2010 so far. Is there a way to export multiple folders at the same time, while keeping the existing album structure? It seems that when I try it, iPhoto exports them all to the same folder.
    I really don't want to do this one album at a time, and here's why -
    I'd like to select all of the albums, then export, using the plugin, to WalMart so that I can order prints.

    Check out [iPhotoToDisk|http://www.iphototodisk.com/index.html]
    I'd like to select all of the albums, then export, using the plugin, to WalMart so that I can order prints.
    Why not upload to Walmart from iPhoto? Check out the first option here:
    There are many, many ways to access your files in iPhoto:
    *For Users of 10.5 and later*
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    (Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    *For users of 10.4 and later* ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    *If you want to access the files with iPhoto not running*:
    For users of 10.6 and later:
    You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
    For Users of 10.4 and later:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    Regards
    TD

  • How can I run  other applications at the same time as downloading email

    When I open my computer if I check mail on entourage first and there are 30+ messages I can not use other apps at the same time as the mail is downloading, is there a way to have email operating in the background. Curiously if I am using another application and a mail comes in , the first app runs with mail running in the background , Why is this not the case when Entourage is the first program running and it is downloading mail.

    http://www.officeformac.com/ProductForums/Entourage/ Alternatively, don't launch it at login, launch it after logging in.

  • HT204655 Can I see multiple albums at the same time

    When converting the iPhoto library to Photo most of the albums that were in place in iPhoto converted to albums in Photo . . . .but not all. Some were retained as events mainly those that were folders within an album. In order to move them to the right album I would like to have multiple albums open at the same time (side by side) so that I can make sure not to duplicate photos or move them to the wrong spot.
    I cant see how to do this, it seems that I can need to open one album and check phots and then close to look within and other and rely on memory. There must be a more efficient and accurate way to do this?

    When converting the iPhoto library to Photo most of the albums that were in place in iPhoto converted to albums in Photo . . . .but not all. Some were retained as events mainly those that were folders within an album. In order to move them to the right album I would like to have multiple albums open at the same time (side by side) so that I can make sure not to duplicate photos or move them to the wrong spot.
    I cant see how to do this, it seems that I can need to open one album and check phots and then close to look within and other and rely on memory. There must be a more efficient and accurate way to do this?

  • Can I view multiple sheets at the same time?

    My search fu hasn't been up to finding how, or if it is possible, to view multiple sheets of the same document at the same time. Can it be done? Either a split view in a single window or multiple windows would be fine.

    marchyman wrote:
    Thanks for the answer. Another workaround is to copy the table that I'm interested in and move it to the sheet where I want to see it. When done I can copy it back or delete it. Just seems like extra effort for something that should be built in.
    No need to copy the sheet. You could just drag it to the sheet where you want to see it, and when done, drag it back 'home'. (This can be done using the icons in the sidebar.)
    Caution: Changing to this method will require vigilance on your part to prevent accidently deleting the table instead of moving it. frequent Saves are recommended.
    Regards,
    Barry

  • Can i run two PIDs at the same time?

    Hi
    I want to control speed of the rotating shaft and force applied by the pneumatic cylinder using two different PIDs from the same program.
    I managed to get two PIDs to work separatly using PID control loop VI`s supplied with labview 6.1 (I got Kc, I and D right, so there is no overshoot). When I try to run both PIDs within my vi they don`t work. I again tried various gains and managed to get one PID to work but not the other. Then through trial and error I managed to get a second PID to work but I had to change refresh time of the FOR loop from 100msec to 1msec.
    Does anyone have experience with running two PIDs in the same program? Does the timing of the FOR loop influence PID contorller? Does equiring of other data while
    running PID has effect on the PID?
    I would really appreciate any comments/help. I am pretty thrustrated at this time
    Thanks

    I don't know whcih PID vi's you are using but I had similar problems. I
    solved it by going to the VI properties of the PID subvi, select category
    execution and make sure that reentrant execution is selected. Only then two
    instances of the PID vi can run without interfering each other.
    Martien
    solved by setting the execution mode
    "smartlander" wrote in message
    news:[email protected]..
    > Hi
    >
    > I want to control speed of the rotating shaft and force applied by the
    > pneumatic cylinder using two different PIDs from the same program.
    > I managed to get two PIDs to work separatly using PID control loop
    > VI`s supplied with labview 6.1 (I got Kc, I and D right, so there is
    > no overshoot). When I try to run
    both PIDs within my vi they don`t
    > work. I again tried various gains and managed to get one PID to work
    > but not the other. Then through trial and error I managed to get a
    > second PID to work but I had to change refresh time of the FOR loop
    > from 100msec to 1msec.
    > Does anyone have experience with running two PIDs in the same program?
    > Does the timing of the FOR loop influence PID contorller? Does
    > equiring of other data while running PID has effect on the PID?
    > I would really appreciate any comments/help. I am pretty thrustrated
    > at this time
    > Thanks

  • Can I show multiple calendars at the same time, as you can  in Outlook

    I want to use the calendar for a service dept & show several calendars at the same time, vertically, for each person. Is this do-able?

    You can do a batch export by sending them to Adobe Media Encoder with the Queue button in the export settings dialog.
    However, you will have to set up each export one at a time.

  • Can I set multiple events at the same time to repeat on iCal?

    I know I can do this by manually selecting each one of them and setting it to repeat.
    But it's a pain and it doesn't make sense not to be able to edit more than one event at the same time.
    When I want to set up my weekly schedule I do it for one week and I want to be able to select all the events in that week and set all of them to repeat weekly at once.

    There are editors that bring up the songs one at a time, so you can edit them in a row.  Winamp works that way.  iTunes does not.

  • How Can I Sync Multiple Changes at the same time?

    Is there a way to configure iTunes so that I can make changes in multiple sections, and only sync or apply them when I've made all of them?
    For example: I want to changes setting in Music, Apps, and Books. Today, it seems like I have to go to change settings,hit apply, and wait for the iTunes to sync for each one. What I want to do it make changes in all of them, then hit apply/sync and wait for the iTunes to sync all my changes in one swoop.
    The seems very intuitive and saves the user a lot of time. Can iTunes be configured to due this?

    The OP's question asked - in iTunes for Windows, if it was possible to "configure iTunes" (not the iPod) and then "Sync those changes to the iPod in one step"
    Is there a way to configure iTunes so that I can make changes in multiple sections, and only sync or apply them when I've made all of them?
    For the media, one can;
    untick songs in the Library in order for them to be removed at the next Sync (and obviously the reverse to put them back on),
    the same procedure for books,
    create and modify Playlists,
    remove or add photos to the chosen Photos folder (in Windows of course, not in iTunes) which then get removed or added at the next Sync,
    and then connect the iPod. One can prevent an iPod from Syncing at initial connection time, so that further changes to things such as which Apps to Sync (which does need to iPod to be connected), choices of Selected Playlists only, etc. (ditto) can be made by choosing the appropriate pane. As yet, whenever I've done this, I have never had to Sync one change before switching to a different pane. The first change causes the Apply and Revert buttons to appear. I ignore them and continue to make further changes on the other panes. Then I select Apply. The Apply/Revert buttons are removed and replaced by a Sync button. So, although there is the Apply, then Sync to be done, it can hardly be described as a burden.
    Are you saying Chris, that you have to apply one change at a time, followed by a sync before making any other change?

  • Can't access multiple webpages at the same time

    here's an example of what i want to do... go to a news website and open three stories in three new webpages before i go into airplane mode... reading those three distinct stories on the plane (offline).
    it seems once you navigate away from a page it loses the connection to that page... then why have the ability to open multiple pages on the iphone if its not going to actually access them simultaneously...
    another example
    say i have jivetalk open in one window... then i can open a second page to check a live sports score... when i go back to safari window 1 with jive talk its reloading like its the first time i'm going to that page... in effect losing my logged in status/convo's and reloading like it was my first time there...
    am i missing something or is there a workaround for this

    i tested this on a US At&t phone also and its the same issue... so the hack is not the problem... nor does it seem like the kind of problem to be caused by a crack... this is not a bug... its how its designed... but it sounds like in your post that its solved in 1.1.4... the "no longer needing a refresh" is exactly the problem im talking about...

  • When I try to start Firefox, I get a message that it is already running but not responding and I can't run another Firefox at the same time. I uninstalled and reinstalled. No change. Tried various other suggestions. Help!!

    When I try to start Firefox, I get a message that it is already running, but not responding and that I should close it before trying to run another Firefox. But I cannot find a way to close Firefox program that is not running as far as I can see. I tried uninstalling and reinstalling Firefox, but that did not work. I've tried various other things, but no luck. I thought programs should stop when the computer is turned off, but that didn't work either.

    How are you opening the Profile Manager?
    *http://kb.mozillazine.org/Profile_Manager
    Sounds that Firefox is still or already running.<br />
    See:
    *http://kb.mozillazine.org/Kill_application

  • Run Multiple Methods at the same time

    Hey Everyone,
    So here is my dilemia. I have these three classes and two of them are subscribers to a middleware so when I call one of these classes to subscribe the code stops while the subscriber listens for the message. The problem is that the other class I have is the publisher and unless I want to run the publisher as a separate script I need to find a way to run it once the subscriber is listening. Some have suggested I use a callback but I am unfamiliar with how a callback would work. In Matlab when I use callbacks I still end up waiting for the subscriber to come back with a response so I am not sure this is the solution to my problem in Java.
    I have a main method in a main class which calls methods in each of three classes however once it subscribes to the first one on the list it stops and waits for the subscriber to finish working. Does anyone have any suggestions of how to allow the subscriber to continue to listen but still return back to the main method and allow me to run the next subscriber and so on? Thanks for your help!!

    You'll need some sort of multithreading. Whether you roll your own or there's some prepackaged tools out there you can use, I don't know, as I didn't understand your requriements very well.
    http://java.sun.com/docs/books/tutorial/essential/threads/

Maybe you are looking for