Can executable VI compiled using Windows version AppBuilder be run on Linux OS

Hi, has anyone tried running executable VI, created in Windows version LV, on Linux or other operating systems. Please share your experience...thx
Regards

duplicate post: http://forums.ni.com/ni/board/message?board.id=170​&message.id=209592#M209592
Message Edited by altenbach on 10-10-2006 08:56 PM
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • Where should be the file of database if i use windows version of oracle

    hello
    where should be placed the file of database if i use windows version of oracle ?
    will be there some special partion for dadtabase file ?
    10x

    user10860289 wrote:
    i thin the database shoud has own file
    in interbase this file is name_of_db.gdb
    i seatch for such database file in oracle ? And why would you expect Oracle to have the same file(s) as some other product?
    Oracle implements it's databases with multiple data files, not just one. And that's in addition to all of the various files that make up the software, apart from any databases.
    You definately do not want to put the database files under ORACLE_HOME. If you have any choice at all, I wouldn't even want them on the same partition. A default installation and db creation may try to put them there simply because that is the one directory structure oracle can count on being there. But that is one default that is far from best practice.
    The minimum partition configuration I'd want for a Windows server hosting an Oracle database is ....
    c:\ - operating system only
    d:\ - Oracle home, admin, and one set of all duplexed files (control, redo)
    e:\ - all other database files
    For the 'sandbox' setup on my personal laptop, where I only have a c: drive, I still break it out ...
    c:\oracle\app\product\10.2.0 <-- Oracle Home
    c:\ora1\mysid\ <--- some data files
    c:\ora2\mysid\ <--- some data files
    c:\ora3\mysid\ <--- some data files
    Take a look at this: http://download.oracle.com/docs/html/A97297_01/appg_ofa.htm
    It is out of the 9i docs, and is directed to unix, but if you will read and understand the principles it is a good guide even for Windows. You can also google "optimal flexible architecture" and get lot's of other docs.
    I dare say that at this point It would be a good investment in your career to go to tahiti.oracle.com. Drill down to your product and version. There you will find the complete doc library.
    You should spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
    Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there. Learning where to look things up in the documentation is time well spent on your career.
    Read the 2-Day DBA manual cover to cover.
    Notice the 'search' function at that site.
    Then set yourself a plan to dig deeper.
    - Read a chapter a day from the Concepts Manual.
    - Look in your alert log and find all the non-default initialization parms listed at instance startup. Then read up on each one of them in the Reference Manual. Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files, then look up what you see there in the network administrators manual.
    Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
    Am I wrong ?

  • How to scroll up and down in IBM client access using windows 7 on mac running bootcamp

    How to scrool up and down in Client Access 5250 (AS/400 emulator) using windows 7 on Mac running boot camp. The key board does not function within the client access 5250 session?

    You can also share a printer between the Mac/PC as well as files and mounted Volumes, see the Tiger articles here
    http://www.ifelix.co.uk/tech/
    You may want to use Bonjour for Windows on your PC
    http://www.apple.com/macosx/features/bonjour/
    Then there are VNC clients for Mac/PC that also allow you to actually control the other machine, if they aren't in the same room and you just need to check something quick that can be handy, it's kind of slow though for regular use.
    The main benefit of partitioning is being able to have different versions of bootable OS on them. You can try out Leopard on a new partition, while keeping your Tiger partition intact, you can have a XP/Vista partition for parallels or BootCamp, etc... other than that drives are pretty much fast enough, having smaller partitions probably won't realize any significant speed ups over searching the whole large drive.

  • Trouble Updating ITunes v 10.6.3 to Windows Version 5.1 Running as XP

    I am running Windows Version 5.1 (runs as XP) and have been attempting to upgrade to ITunes version 10.6.3.  Each time I download the update file from ITunes, it seems to download alright, then starts to install and then gives the following error message:
    The path 'C:\Documents and Setting\[user name]\Local Settings\Application Data\Apple\Apple Software Update\iTunes.msi' cannot be found.  Verify that you have access to this location and try again, or try to find the installation package \iTunes.msi' in a folder from which you can install the product iTunes.
    The file itunes.msi is present and appears to be complete (same size as the download file).  I've also tried to do an new install and receive the same message when the install attempts to remove the old files resident on the hard drive.
    Any suggestions as to how to correct this problem?

    The path 'C:\Documents and Setting\[user name]\Local Settings\Application Data\Apple\Apple Software Update\iTunes.msi' cannot be found.  Verify that you have access to this location and try again, or try to find the installation package \iTunes.msi' in a folder from which you can install the product iTunes.
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Can I use ASUS VM60-G072R Desktop (like mini Mac) with my iMac all in one computer? I need to use Windows version of QB and I don't want to buy a PC tower or laptop.

    I need to use the Windows version of Quickbooks Pro and I don't want to use Parallel or buy a PC tower or laptop. Can I use ASUS VM60-G072R Desktop (like Apple Mini) with my iMac all-in-one computer?

    Thank you Kappy. I guess I have to decide to purchase a separate monitor and keyboard for this mini PC computer then. And also find extra space in my office. I'm happy you answered my question so quickly.

  • How to execute SQL Script using windows powershell(using invoke-sqlcmd or any if)

    OS : Windows server 2008
    SQL Server : SQL Server 2012
    Script: Test.sql (T-SQL)  example : "select name from sys.databases"
    Batch script: windows  MyBatchscript.bat ( here connects to sql server using sqlcmd  and output c:\Testput.txt) 
     (sqlcmd.exe -S DBserverName -U username -P p@ssword -i C:\test.sql -o "c:\Testoutput.txt)  ---it working without any issues.....
    This can execute if i double click MyBatchscript.bat file and can see the output in c:\testput.txt.
    Powershell: Similarly, How can i do in powershell 2.0 or higher versions?  can any one give full details with each step?
    I found some of them online, but nowhere seen clear details or examples and it not executing through cmd line (or batch script).
    example: invoke-sqlcmd -Servernameinstance Servername -inputfile "c:\test.sql" | out-File -filepath "c:\psOutput.txt"  --(call this file name MyTest.ps1)
    (The above script working if i run manually. I want to run automatic like double click (or schedule with 3rd party tool/scheduler ) in Batch file and see the output in C drive(c:\psOutput.txt))
    Can anyone Powershell experts give/suggest full details/steps for this. How to proceed? Is there any configurations required to run automatic?
    Thanks in advance.

    Testeted the following code and it's working.....thanks all.
    Execute sql script using invoke-sqlcmd with batch script and without batch script.
    Option1: using Import sqlps
    1.Save sql script as "C:\scripts\Test.sql"  script in side Test.sql: select name from sys.databases
    2.Save Batch script as "C:\scripts\MyTest.bat" Script inside Batch script:
    powershell.exe C:\scripts\mypowershell.ps1
    3.Save powershell script as "C:\scripts\mypowershell.ps1"
    import-module "sqlps" -DisableNameChecking
    invoke-sqlcmd -Servername ServerName -inputFile "C:\scripts\Test.sql" | out-File -filepath "C:\scripts\TestOutput.txt"
    4.Run the Batch script commandline or double click then can able to see the output "C:\scripts\TestOutput.txt" file.
    5.Connect to current scripts location  cd C:\scripts (enter)
    C:\scripts\dir (enter )
    C:\scripts\MyTest.bat (enter)
    Note: can able to see the output in "C:\scripts" location as file name "TestOutput.txt".
    Option2: Otherway, import sqlps and execution
    1.Save sql script as "C:\scripts\Test.sql"  script in side Test.sql: select name from sys.databases
    2.Save powershell script as "C:\scripts\mypowershell.ps1"
    # import-module "sqlps" -DisableNameChecking #...Here it not required.
    invoke-sqlcmd -Servername ServerName -inputFile "C:\scripts\Test.sql" | out-File -filepath "C:\scripts\TestOutput.txt"
    3.Connect to current scripts location
    cd C:\scripts (enter)
    C:\scripts\dir (enter )
    C:\scripts\powershell.exe sqlps C:\scripts\mypowershell.ps1 (enter)
    Note: can able to see the output in "C:\scripts" location as file name "TestOutput.txt".

  • How can I get 64-bit windows versions other than 'nightly'

    How can I get a 64-bit version of Firefox for Windows that isn't alpha quality (Nightly).
    I'm still running FF 3.6.26 ....
    I've said before, give me a reason to upgrade...64-bits would be a good reason, but the fact that a large number of extensions fail -- (try to install the latest firebug 'swarm' in nightly -- epic fail! (404)...), we not only don't have a swarm for you we've never even heard of you!...
    So give me a version of FF-go-nightly, that's equiv to the latest released version, and it might have a chance...
    I did get most stuff working -- curious why jar files were renamed to 'ja', they don't seem to be in japanese when I unpacked them... ;-) I found it wasn't a typo...
    had a full transparent brower on about blank... a bit weird. but sorta cool...
    finally figured out how the menus were messed up and saw howto correct most of the damage, but without spending alot more time fine-tuning, it would be hard to get it back just right.. but after spending a day (~10am-8pm on using Nightly), upgrading/config'ing various extensions....etc.
    Anyway, I know I said give me a reason.. to upgrade from 3.6 -- a carrot rather than a stick, but too many problems...come on .. even the version was unlucky to begin with! (13!?) .. (I like 13, really, but thought it was humorous).
    So how about 64-bits in something a bit better supported?
    Why not 64bit versions of each of the releases?
    Finally FF got a bit better perf (a bit worse for more debug on, but better in having enough memory, and using a native instruction set rather than the virtualized 32-bit WOW, that it normally runs on...)...

    Mozilla has never released a 64-bit version of Firefox for Windows, and the 32-bit versions of Firefox are faster than the Nightly 64-bit version test builds.
    http://www.mozilla.com/en-US/firefox/

  • Use Windows version to test website compatibility?

    Is it reasonable to use Safari for Windows (3.1) to test that my website is "compatible with Safari"?
    Are there known differences between the Mac and PC versions other than the fonts?
    Thanks a lot for your insights
    Philippe
    PS: Commercial website, including CSS, Silverlight, AJAX, ...

    And you may be doing what I do: Developing on a Macintosh computer running OS X. I do have an emulator for Linux, but not for Windows, so I cannot run IE—except I can.
    Here's how I do it.
    Use Virtual Box. You can set up installations of Windows to run the Three Big Browsers that you need to test on, like I have:
    I can run any of the three virtual machines and test whe I am doing in a Microsoft browser. I no longer support Internet Exploiter 6. My clients are  not interested in China.

  • How can I just modify (from "Windows" version to "Mac") my purchased software?

    I've already purchased the Adobe Premiere Elements 13 in the wrong version: I need it for Mac and I've ordered the Windows version. How can I modify it?
    Thank you in advance,
    Jose Luís

    Thanks Ned, but the moment I bought it I did it wrong and when they offerded me to choose one version I picked up "Windows" instead of "Mac" by mistake... now I can't find the way to modify it.

  • Can I upgrade from a windows version to a mac version?

    I have a windows version of Acrobat 9 Standard and want to upgrade to a mac version of Acrobat XI Pro - is that allowed?

    Hi ChrisC2008,
    If you have a previous version, you cannot swap to a different platform or language of the previous version. Instead, it's necessary to upgrade. So the answer to your question is 'Yes' you can go for cross platform upgrade.
    For more information please refer to http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l
    Thanks!
    Gurpreet

  • Can I download and use TWO versions of Foxfire at once? I teach online, using Blackboard & my university requires me to use Firefox 3.6 for Blackboard to fully function, but want to use the latest version for personal use.

    Is it possible to download the latest version, while still keeping the 3.6 version on my computer as well? I use Windows XP – thanks in advance for any help.

    Hey dwebster,
    You might want to consider running the older version [http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 on a USB Stick with PortableApps]. That way you'll still be able to run the latest version for your day to day activities.
    Hopefully this helps!

  • Firefox always says using old version even after running the upgrade programme. Even after uninstalling & reinstalling? Why?

    Every time I open Firefox the message "using old version" appears I have tried uninstalling the program and then reinstalling but no change, When I use Firefox as my browser a message appears to say you are using an old version of Firefox. This is just fustrating what can I do to correct?

    Try resetting your User Agent:
    *[https://support.mozilla.com/en-US/kb/websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser#w_reset-your-user-agent Reset your user agent]
    *[http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default Resetting your useragent string to its compiled-in default (Mozillazine)]
    *What is a User Agent: http://en.wikipedia.org/wiki/User_Agent
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Java problem; can I go back to old version? Thread.run; red x

    Hi
    I have a Minolta 2001 - copymachine which I can handle over Browser and java.
    I can see the copymachine and theDetails; i cannot use the Java based WebTools
    I have 2 mac iMac G5 with 10.4.8 and MacBook intel 10.4.8
    till 10.3.x on my iMac G5 everything is fine
    later - in the Tigerversion - or 10.3.9 ?
    I got following messages in the log - Macbook never worked
    basic: Ausnahme: java.lang.NoClassDefFoundError: com/efi/utils/chooser/ChooserHolder
    java.lang.NoClassDefFoundError: com/efi/utils/chooser/ChooserHolder
    at java.lang.ClassLoader.defineClass1(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
    at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:163)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:119)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
    at java.lang.Class.getDeclaredConstructors0(Native Method)
    at java.lang.Class.privateGetDeclaredConstructors(Class.java:2328)
    at java.lang.Class.getConstructor0(Class.java:2640)
    at java.lang.Class.newInstance0(Class.java:321)
    at java.lang.Class.newInstance(Class.java:303)
    at sun.applet.AppletPanel.createApplet(AppletPanel.java:721)
    at sun.plugin.AppletViewer.createApplet(AppletViewer.java:1807)
    at sun.applet.AppletPanel.runLoader(AppletPanel.java:650)
    at sun.applet.AppletPanel.run(AppletPanel.java:324)
    at java.lang.Thread.run(Thread.java:613)
    the panell have a red X and do not bring the menu für the webtools
    I can see the copymachine, and see how are the details;
    but I cannot use the javadriven WebTools
    everything is fine working with OS 10.3.x
    I had the same troubles with my PC XP Laptop.
    There I can solve the problem:
    I delete Java, InternetExplorer
    install InternetExplorer new -
    and with the explorer th old Java
    BINGO all things are working!
    Perhaps anyone of you can help me ?
    I checked
    Version of Java - I have the latest
    I reset Java
    I reset Safari
    I also change my network - I put the router away - only switch in the network - did not work
    nothing worked
    hope any of you have a solution.
    THNX in advance for every answer
    even if you think its stupid
    MacBook, iMac 20   Mac OS X (10.4.8)  

    I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any iDevice.

  • Windows antirootkit tools that run in Linux

    Today I just finished repairing someone's Windows Vista installation. The person in question had come across a hacked website while browsing with UAC and Protected Mode turned off, relying solely on McAfee AV and Windows Defender for their protection.
    I was (apparently) able to clean up the aftermath using the Kaspersky live CD, Malwarebytes Antimalware, and HijackThis. However, several Windows based antirootkit tools I tried to run - Gmer, Avira Antirootkit, and Rootkit Revealer - all failed, leading me to suspect a rootkit infection. The (generally poor quality) antirootkits I could get running didn't turn up anything, but I was still suspicious.
    I wound up abandoning the rootkit search after scanning with SuperAntiSpyware and ClamAV and Avira live CDs, as well as Sophos Antirootkit and Trend Micro RootkitBuster, all of which turned up nothing. But I'm still annnoyed that I wasn't able to get in a dedicated antirootkit scan from a live CD.
    Now normally my solution would be to create a BartPE live CD with Gmer or something on it. Unfortunately though, I don't feel like forking out a day's worth of work for Windows 7 or Vista SP2, and the security situation on XP SP3 has gotten so vile that I feel it's simply no longer viable as a personal OS. So my netbook has only Linux partitions now, and all the other computers in the house are either Ubuntu LTS, Windows 2000, or G3s running MacOS 9.x. (No I'm not kidding.) In other words, BartPE would be a real pain to set up.
    So...
    Does anyone know of dedicated software for detecting Windows rootkits, that can run in a live Linux environment? It looks like I got lucky this time, but next time I'd rather not rely so much on luck.

    ckrootkit and rkhunter are both good, but neither are dedicated to Windows.

  • How to disable "This Connection is Untrusted" warning in firefox using shell or perl script running on Linux Platform

    We have QA automation jobs that invoke user interface tests in Firefox running on a virtual Linux host.
    My tests perform regression, but I'm held up because of the Firefox This Connection is Untrusted warning.
    My current requirement is to ignore this connection untrusted warning, which comes up when accessing an HTTPS website and i want this to be disabled through either a shell or a Perl script.
    I can do this manually using the steps below, but this will not work for my current problem since the virtual Linux hosts are created dynamically on submission of automation jobs.
    Go to Tools > Options > Advanced "Tab"(?) > Encryption Tab Click the "Validation" button, and uncheck the checkbox for checking validity.
    Is there any Perl or shell script that disables this certificate warning?

    There might be an add on to accomplish this:
    *[https://addons.mozilla.org/en-US/firefox/addon/skip-cert-error/ Skip Cert Error]
    However if we cannot find a solution there might be another place for support:
    *[https://support.mozilla.org/en-US/kb/where-go-developer-support Where to go for developer support]

Maybe you are looking for