Can get the AirPlay to work off my computer, but not my iPhone or iPad. I have the latest software. Airplay logo never appears on iPhone or iPad.

Try here > http://support.apple.com/kb/TS1538

Similar Messages

I can get my earphones to work on my macbook but not my external computer speakers! what gives? cheers..

Title says it all.. im baffled, i can play my phone and tablet no problem but not my laptop

rm44 wrote:
The both screens always worked fine but now the power book doesn't show anything on the screen. I didn't drop it or even move it. Where is the brightness button? Could I have hit it by mistake?
Thanks so much for your help.
F2 is the up-brightness button, F1 is the down-brightness button, usually, on PowerBooks. If for some reason the F1 button got held down for a couple of seconds, the display would go completely dark.
That being said, if the backlight does not come up (easily determined by seeing if the Apple outline on the cover is lit up) then the most likely suspect would be the inverter board, or the connection to the inverter board. If this is a Titanium PG G4, the inverter board is easy and relatively inexpensive to replace. For the Aluminum models, I don't know if that is quite so true.

When going from Gmail to google calendar I get an error message that the google is asking for a redirect that cannot complete. This works fine in IE, but not my beloved Firefox. I have the default cookie settings still in place

When looking at my gmail, I want to open google calendar, but get the above error message. Cookies are enabled, default settings are still I place. This works fine when I use IE. HELP!

This issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
* http://kb.mozillazine.org/The_page_is_not_redirecting_properly

I can not get several apps to load on my i-pod touch and I even restored it back to factory. The message I get is that I need iOS 4.3, but i-tunes tells me I already have the latest version.

I can not get several apps to load on my i-pod touch and I even restored it back to factory. The message I get is that I need iOS 4.3, but i-tunes tells me I already have the latest version.

You can't install any application which requires iOS 4.3 or newer on a first or second generation iPod touch. If you still have a copy of that application compatible with iOS 3.1.3 or 4.2.1, import it into the iTunes library and sync it.
(72397)

Is there an icon for face time on the iphone4s home screen? I remember I saw it before but not any more. I still have the FaceTime app,but would like to find the icon on the home screen again. Anyone can help?

Is there an icon for face time on the iphone4s home screen? I remember I saw it before but not any more. I still have the FaceTime app,but would like to find the icon on the home screen again. Anyone can help?

Check all of your folders to see if FaceTime is in any of them.
If not, check your restrictions (Settings>General>Restrictions) and if restrictions are on, and you know the passcode, then FaceTime might be turned off. Turn ON to veiw icon on home screen.
Let me know if this does/doesnt work.

HELP!! WRT54G2 works for one computer, but not for the other

I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!

As your one computer is working fine then there is no problem with the router so far...
The computer which is not working...check the IP Address on that...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

It works on my Computer, but not in my DVD Player

I burned a DVD, It works on my Computer, but not in my DVD Player...why?

still am trying to figure out how to burn at a slower speed, I see no optiond on iDVD.
You need to create a disk image out of iDVD, then burn. See below.
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/18.html
http://www.kenstone.net/fcphomepage/image_to_diskstone.html
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

Why will icloud update my contacts, but not my calendar (ie birthdays) I have the "show birthday calendar" ticked

why will icloud update my contacts, but not my calendar (ie birthdays) I have the "show birthday calendar" ticked

why will icloud update my contacts, but not my calendar (ie birthdays) I have the "show birthday calendar" ticked

Ipod works on one computer but not the other?

Can someone please help me? My ipod works on my laptop but not the desktop. When I plug the Ipod into the desktop it sometimes shows up in Itunes but says it's corrupt. Which it obviously isn't because it works fine on it's own when not plugged into a computer and it works fine when I plug it into the laptop. Also when I looked in my computer the Ipod would show up as drive j and it would flash on and off. Well, I tried plugging the Ipod into a different port and that worked as far as drive j stopped flashing on and off. I tried changing the drive name and it wouldn't let me because it always went back to drive j even after I changed it to drive z. Itunes is playing music and is up to date. I have Windows Vista Home Premium 64 bit. Please help.

Well start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
http://support.apple.com/kb/TS1493
Patrick

ICal Subscription Works On One Computer But Not The Other

I subscribed to a web based iCal subscription. The subscription refreshes on my Mac Mini but not on my desktop, which is connected to my iPhone. The iPhone therefore doesn't get the subscription contents either. I've tried deleting and resubscribing but nothing works.

Hey Valenz0711,
That definitely sounds frustrating. There are a few different reasons it may not be working on the iMac (iTunes is not up-to-date, Firewall Settings). The following article may provide more information on a resolution:
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
Thanks,
Matt M.

HT201322 Will hiding songs hide them from all computers? Is there a way to delete a song off one computer but not the other?

My mom & I share the same iTunes account and we finally have seperate computers. If i hide songs from iCloud on my computer will it also hide them on her's? If it does, is there anyway i can hide/delete some songs off my computer but keep them on her computer because I don't want her music on my compute but i don't want to repurchase everything i have....

Try restoring your iPod. Restoring will erase the iPod's hard drive, reload the software and put it back to default settings. it won't remove anything from your iTunes library. Once the restore is complete follow the on screen instructions to name the iPod and automatically sync your songs and videos onto the fresh installation. Press Done and the iPod will appear in iTunes and start to sync. If you want to update manually or using selected playlists uncheck the box beside the sync automatically instruction and press Done, it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

HT5622 when i try to sign in to my Icloud account i get this message"The Apple ID is valid but not an icloud account" i only have the one ID so how do I get around this please

when I try to sign in to my Icloud account on my windows PC i get this message"The Apple ID is valid but is not an icloud account" i only have the one apple
ID so how do I get around this please ??

note I own no other Apple device I just wanted to use icloud for data storage and Itunes

Sign in to icloud... but it is not showing the correct email. It works on my computer but not on the phone

Its is showing the wrong email... I can sign in on my computer but not the phone

Welcome to the Apple Community.
If it isn't showing up at all, it means that Find My Phone hasn't been activated.
If it's just the location that isn't showing up, it may well mean it isn't connected to a network at this time.

Works on my computer but not online

Hello for everyone!
I have this kind of problem: I have done a website that's
using exactly the same code as Shane Rebenschied's lynda.com
tutorial "Intermediate macromedia flash".
Everything works fine when I test it offline but when I
upload it to a server LoadVars-object fails to load textfiles to
textfield.
I have checked everything I can possible imagine. Filepaths
are exactly the same on server as they are on my computer's
harddrive.
Here is the code if anyone can work this out:
//--------------<LoadVars>-----------\\
var myLV:LoadVars = new LoadVars();
myLV.onLoad = function (success) {
if(success) {
_level5.loadedInfo.htmlText = myLV.info;
} else {
_level5.loadedInfo.text = "Error when loading information.
Please report this error to webmaster.";
//--------------</LoadVars>-----------\\
Online it gives me that error that I have written. Offline
everything works beautifully.
I have checked all FTP-issues etc. Files on server are
exactly the same as on my harddisk.
Hope someone can help me. This site should be published now!
Thanks in advance,
Samuel Ranta

I have the same problem. The swf file plays ok in
Dreamweaver but if I preview it in the browser, it's not there! If
I go to 'window' (menu bar) > Activity, it says 'my site
URL/favicon.ico not found
I've put favicon into the adobe knowledgebase search but
nothing's found.
I'm new to flash. not sure if there's something I'm not
putting on the server that should be put on there.
I put the .swf file and the AC_RunActiveContent.js file up
there..
Any ideas what I'm doing wrong?
Any pointers gratefully received.
Rick

Implicit read with assembly module instance working on one computer, but not another

Hi,
I'm trying to set up an on-site computer to run a VI which uses assembly instances for data communication, but for some reason I'm unable to establish a connection to the PLC.
I'm running the example vi "CreateAssemblyInstance.vi" to try and get the communication set up before I start using my actual program.
When I run this code on my development machine, I'm able to establish a connection to the PLC and read data. I then go into RSLogix 5000 and change the IP address to the on-site machine and try to run the test VI there, but I'm unable to make a connection. LabVIEW-side, the program thinks that it's established a connection and is reading/writing data, but PLC-side I'm getting a "Connection Failed" message in RSLogix.
I find it weird that LabVIEW thinks the connection was established just fine, which the RSLogix says it can't connect to the VI.
Just wondering if anyone else has had this happen. We aren't sure why the same VI runs on one machine but not another. We used RSLogix to change the IP address of the target machine, so we don't think that's the issue. And both computers are on the same network, so we don't think it's a firewall issue either.
LabVIEW-side, things should be identical. I'm running the same example VI that came with the Ethernet/IP module. PLC-side, we're changing the target IP of the module within RSLogix 5000 (and we're sending the updated information to the PLC) to match the machine we're trying to make a connection with. Are we missing any steps? This is the first time we've tried using an assembly module, so we're having a hard time troubleshooting.
Any ideas on why this is happening?

I'm pretty sure we're using a generic ethernet module:
I can communicate explicitly with the problem computer, it's able to use 'Tag Read' and 'Tag Write' to communicate with the PLC.
We started having another problem just recently too. The Tag Read and Write commands are almost always timing out. I keep getting the error message -251723752:
Detailed error info: Error -251723752 occurred at EthernetIP Tag Read REAL.vi;Details: The request response was not received in the requested timeout period Possible reason(s): Ethernet/IP Industrial Protocol: (Hex 0xF0FF0018) The request response was not received in the requested timeout period
I can't figure out what's causing this all of a sudden, could these issues be related?

Can get the AirPlay to work off my computer, but not my iPhone or iPad. I have the latest software. Airplay logo never appears on iPhone or iPad.

Similar Messages

Maybe you are looking for