Can i add watermarks to PDF files using the PDF Pack?

Hi Susannah,
Adobe PDF Pack does not allow you to edit a PDF file. For that, you would need Acrobat. You're welcome to try Acrobat for free for 30 days: see http://www.adobe.com/products/acrobat.html for more information.
This Help document describes how to watermark a PDF in Acrobat: Add watermarks to PDFs
Best,
Sara

Similar Messages

How can I add to an existing path using the pencil tool?

This probably seems like a rather elementary question, but
whenever I draw a path using the pencil tool, reselect it,
hover over the endpoint, and the click and drag to extend
the line off into a different direction, Illustrator will often
(but not always) erase the existing path and leave only the
new one that I drew.
To wit:
In step 1 above, I draw a line with the Pencil tool.
In step 2 above, I reselect the line from step 1, hover over the endpoint, and then continue to draw further.
However, as can be seen in step 3, the line from step 1 disappears after I draw the new path.
I am aware of the pencil setting, "Edit selected paths", and I have checked it to edit selected paths
within 12 pixels for the above example. What I am doing in the above example, and what I
want to do, is to be able to add more paths onto an existing one using the pencil tool,
rather than have a completely new path being drawn every time I lift up my pen to finish
drawing the previous path.
I also realize that I can do this with the pen tool; but the pen tool is a more
precise tool (and somewhat more cumbersome), and I prefer to have more
of the rough-handed look from time to time.
Finally, I also know that I can use the direct selection tool to select endpoints
from two different paths and then join them using the join command;
but this seems to be more trouble than it's worth in many cases, especially
if I want to do it frequently for a more long and complicated line.
Am I expecting too much out of Illustrator?
Is my idea of how to use the existing tools wrong in this case?
Is there some piece of knowledge I'm missing?
I'm on Illustrator CS5, Mac OS X 10.6.8, using a Wacom Intuos4 tablet.
However, I have confirmed the above on Illustrator CS4 for Mac as well.
Any help or comments would be much appreciated.
Jeff

Thanks @rcraighead - the Live Paint process seems a bit overkill for simply adding
a new path onto an existing pencil path, but I did try the first idea you suggested,
which was tracing a bit over the last part of the existing path and then continuing
on to extend the path. It's a bit imprecise because the existing path gets slightly
modified, but it seems to work pretty well all in all. Nice idea indeed - thanks a million.
I also found that in AI CS5, I can use the selection tool to select all of the paths
in this case and then join them using the join command. I thought I needed to
select individual anchor points for this to work, but it actually works really
well, better than I thought. I seem to recall that previous versions of Illustrator
were a lot more picky with the Join command, but then again this might just
have been my lack of understanding.
I'm curious to know what other solutions to the above problem that other users
might have, so I will leave this question unanswered for a bit...
but I will use your initial technique described - it seems to work
pretty well, in absence of other options Many thanks again for your timely help.
Jeff

How can I add a .mov video file to the beginning of an existing .mp4 video file?

I normally use final cut for all of my editing but Im having a lot of trouble converting this mp4 with bad pixelation.
The mp4 is my only master copy of my original 8mm student film.
It has some bad opening titles I need to alter and I need to slap my production logo on the front before I can even think of releasing this again.
Any ideas?

I normally use final cut for all of my editing but Im having a lot of trouble converting this mp4 with bad pixelation.
The mp4 is my only master copy of my original 8mm student film.
It has some bad opening titles I need to alter and I need to slap my production logo on the front before I can even think of releasing this again.
Any ideas?

Can I control filenaming when archiving files using the file adapter?

Hi folks,
Is there anyway to control the filename used when the File Adapter writes out to an archive?
Second question, I also need to be able to pass a "filename" to the adapter from an "input file." Is there a way to do this in the file adapter?
Sincerely,
lpac

Hi,
I have done that with the ftp adapter. In the .xsl file I wrote the following after the <xsl:stylesheet version="1.0" ....> tag:
<xsl:variable name="INFILENAME" select="ehdr:getRequestHeader('/fhdr:InboundFTPHeaderType/fhdr:fileName','fhdr=http://xmlns.oracle.com/pcbpel/adapter/ftp/;')"/>
<xsl:template match="/">
<xsl:variable name="OUTFILENAME"
select="ehdr:setOutboundHeader('/fhdr:OutboundFileHeaderType/fhdr:fileName', $INFILENAME, 'fhdr=http://xmlns.oracle.com/pcbpel/adapter/file/;')"/>
<opaque:opaqueElement>
<xsl:value-of select="/opaque:opaqueElement"/>
</opaque:opaqueElement>
</xsl:template>
</xsl:stylesheet>
To use this with the file adapter, you would have to wirte file where is written ftp.
Hope this helps,
Zaloa

I'm using Acrobat XI on Windows. I want to add my company's logotype as a watermark to a PDF document. How can I do this? When I add it as a file (jpeg), the logotype is printed on a white square background. It will be positioned on the PDF document o

I'm using Acrobat XI on Windows. I want to add my company's logotype as a watermark to a PDF document. How can I do this? When I add it as a file (jpeg), the logotype is printed on a white square background. It will be positioned on the PDF document on a light, uniform yellowing color. I want this to show through, as if the logotype was stamped directly on the document. Thanks.age to be completely transparent

The above was truncated and garbled a bit and I can't figure out how to edit it. So just to repeat the question a bit more clearly: "I'm using Acrobat XI on Windows. I want to add my company's logotype as a watermark to a PDF document. When I add it as a file (jpeg), the logotype is printed on a white square background (because the jpeg is square with a white background of course). It will be positioned on the PDF document on a light, uniform yellowish color, which I want to show through. I want it to look as thought the logotype was stamped directly on the document. Thanks.

After I have combined some files together to make them into one pdf, can I add and take out files?

After I have combined some files together to make them into one pdf, can I add and take out files?

Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha

Export to PDF - Can a single report (rpt file) create multiple PDF files using the export command?

Post Author: markeyjd2
CA Forum: Exporting
Greetings forum members,
My question is, in its entirety: Can a single report (rpt file) create multiple PDF files using the export command, ideally one PDF file per DB record?
In my case; I have a Crystal Report that reads data from a DB table containing ~ 500 records. When I export the report to a PDF file, I get one PDF file, with ~ 500 pages.
What I would like to do is export the report to ~ 500 individual PDF files; One file per DB record. The file names would be based on the table's primary key.
Is this possible?

Post Author: Micha
CA Forum: Exporting
Hi,
you need some lines of code, but its easy. Dependend on how to start the generation of your 500 PDFs, you can write an ASP page and start it via Web Browser, or a Windows Script and start it via scheduled job...
Here's an abstract of the ASP code I use:
First, you create a recordset (here: "rsc") which gives you the list of ID fields you want to export, then you create CrystalRuntime.Application object, then you loop through the recordset, open your report (here: "oRpt") and set login info. Then set the selectionformula, so that the report displays only the data of the current ID, e.g.:
oRpt.RecordSelectionFormula = "(" & oRpt.RecordSelectionFormula & ") AND {myTab.myVal}=" & rsc("myVal")
Then you export the report, move to the next record in recordset, and repeat the loop until recordset.EOF. Then you close recordset and connection.
Micha

How do I generate the pdf file using the name of a field. How can I help

how do I generate the pdf file using the name of a field. How can I help

Hi,
here's a sample.
LiveCycle Blog: Formulare in bestimmte Verzeichnisse speichern und nach Inhalt aus Formularfeld benennen //Save forms to…

I am using Adobe Photoshop Elements 9 - can I add an additional .icc file

I am using Adobe Photoshop Elements 9 - can I add an additional .icc file to 'convert to profile' so that when I send my photos off for printing, they come back exactly as they appear on my screen. If not, how do I get them printed properly?
thanks
Lolly

Moving this discussion to the Photoshop Elements forum.

Can I add a downloadable pdf document to my epub?

Can I add a downloadable pdf document to my epub?

Yes. If you want the pdf file to download immediately when the link is selected and not be displayed in the browser, zip/compress the pdf file (Control (right)-Click on the pdf file and select Compress from the contextual menu) and link to it in the Inspector/Link/Hyperlink pane witn the Link To: A File option.
A second option is to zip the pdf file and upload it manually to your website server. Then link to it in the same preference pane but use An External Page option. The URL would be http://URL TO FILE ON SERVER/File _Name.pdf.zip
OT

Add watermark to pdf stored in a table

Hi,
I would like to add watermark to pdf documents. The documents are uploaded and stored in the database. When a user will request a file, I would like to add the username and the timestamp in the requested file.
Any solutions for this (java stored proc, etc.) ?
Thanks !

Hi,
One option is to use a java pdf library such as iText ( http://www.lowagie.com/iText/ ). You could watermark the pdf's in java stored procedures.
Here's an example I found that does some watermarking (the PdfStamper section):
http://itextdocs.lowagie.com/tutorial/general/copystamp/index.php
One way to use iText would be to load the iText jars into Oracle and write a java store procedure to manipulate the pdf's in Oracle.
Regards,
Jeff

How to apply special right to the PDF file using the LiveCycle Rights Management Server.?

How to apply special right to the PDF file using the LiveCycle Rights Management Server.?
I want to edit bar code field data using Adobe Reader. Bar Code field was designed and data was changing using Acrobat X1 Professional (Trial Version). But can't do so in adobe reader.

I think that product has nothing to do with it. You would use LiveCycle Reader Extensions.

Can I add a bookmark when I using Adobe reader on my ipad?

Can I add a bookmark when I using Adobe reader on my ipad?

Hey Vicky,
Using Adobe Reader on your iPAD, you cannot add new bookmarks.
But, you can navigate bookmarks in the PDF added by the author.
Regards,
Anubha

How can I create an csv/excel file using pl/sql and then sending that file

How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.

968776 wrote:
How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.You are trying to do it at a wrong place..
Whay do you want database (pl/sql) code to do these things?
Anyhow, you may be interested in :
{message:id=9360007}
{message:id=9984244}

Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

Can I use the new Time Capsule to backup my mid 2010 Macbook Pro?
Yes, if you are asking about using Time Machine to backup the Mac.
Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?
You are not thinking of deleting the photos and files on your Mac, are you? If you do this, you will have no backups for those files.
Another concern is that Time Machine backs up the changes on your Mac. At some point, Time Machine will automatically delete the photos and files from the Time Capsule.....you just don't know when this might occur.
In other words, only delete files from your Mac that you can afford to lose.

Can i add watermarks to PDF files using the PDF Pack?

Similar Messages

Maybe you are looking for