Can I attach two scanners each having a different twain drivers

Can I attach two scanners each having a different twain drivers?
I have a brothers all in one printer (scan print fax) it has a twain driver for the scan.
I want to add a slide scanner to my system, it requires a different twain driver.
Ia thi a problem? I i have a problem how do i remove one or both twain drivers?

Two links may help
In Brother website there is a link describing how to remove drivers.  The example shows multiple drivers, multiple vendors
http://www.brother-usa.com/FAQs/Solution.aspx?FAQID=200000032625&ProductID=MFC44 20C&Keyword=#.VHNPbIuWXoY
The second link from Brother shows their supported Yosemite products
http://support.brother.com/g/s/id/os/macintosh.html

Similar Messages

  • How can I attach two extra monitoe to an IMac and have them work independently of the INas nonitor where I can place a document and manipulate it independently?

    How can I attach two additional monitors th an IMac and be able to place documents in either one or all three and manipulate them independnetly from one another without affecting the others?

    On the vintage machine you have you would need something like:
    http://www.matrox.com/graphics/en/products/gxm/dh2go/
    However if you bought a new 27" iMac they have 2 video outputs that will work with Thunderbolt or MiniDisplay port outputs to external monitors.

  • How can i use two iPads to play a different AU-Instrument for each Pad at the same time via WLAN?

    We have two iPads connected to the MacBook with two different Midi-Sessions. Now we want to connect the every Session to a single AU-Instrument to record live but don´t get it right. In Cubase we just had to choose the Sessions as Midi-Input.
    (Sorry for bad englisch )
    cheers

    Your second post differs form your first, in the first post you said "single AU instrument", in this last post you said "separate synths".  I'll address the second post.
    It's a bit more difficult in Logic than Cubase which has an updated more modern MIDI system.
    The iPad MIDI software will need to transmit on separate MIDI channels for each iPad.
    example:
    iPad #1 MIDI channel 1
    iPad #2 MIDI channel 2 ...etc, doesn't matter which channels as long as they're separate.
    Boot Logic:
    Go to Settings/Recording and select  "Auto Demix by Channel if Multitrack Recording"
    Now setup your AU tracks, select separate channels in the inspector, the channels must match the transmit channels on the iPod.
    You used to have to record enable the tracks, I don't believe that is necessary now.

  • I want to use two keyboards, each with a different language. Is this possible?

    I work in Norway and use a Norwegian keyboard and keyboard layout for most daily activities. However, I code quite a bit and the Norwegian keyboard/layout is ridiculously inefficient for this. Is it possible to have two keyboards linked up to my iMac at the same time, one with a Norwegian keyboard and layout, and one with an English keyboard and layout?

    clevergoat wrote:
    Should also note, this is of course only useful if I don´t have to use a keyboard shortcut to switch languages as well. Cheers.
    Right, and that is always required.  Having two keyboards linked up is in that regard no different than just switching between Norwegian and English layouts on a single keyboard.
    I have read that the app Keyremap4macbook may be able to adjust behavior depending on the active hardware keyboard.  You may want to look at that.
    Or create a custom layout that gives you what you need for programming with the normal Norwegian layout using
    http://scripts.sil.org/ukelele

  • OBIEE-can we link two dimension tables belonging to different fact tables?

    Hi ,
    I have just started with OBIEE concepts....need your views on this issue:
    Fact 1 -> Dim 1, Dim2,Dim3 and so on..
    Fact 2 -> Dim a, Dim b,Dimc and so on...
    If I link Dim1 and Dim a with a valid key ,would that distort the star schemas to slowflake in BMM layer?
    Thanks in advance!
    Neha

    I don't see this that would make it snowflake more like what I think as conforming dimensions. You need to make sure the grain of the measures is at what level , the they are same grain then you should be good however if they are different then you would start seeing null values.
    Fact Measures use the same, conformed dimensions like Dim1 and Dim a if you trying to generate from multiple facts, the BI server was able to automatically stitch them together into a single result set. If they came from the same fact table that's easy as its only one single table, but if you are pulling from different fact tables, the conformed dimensions would allow them to be stitched into the same report
    Conformance means that these sources can be mapped to a common structure – the same levels – and also the same data members.
    Mark if helps.
    Thanks,
    SVS

  • How can I setup two ipods to automatically sync different songs?

    My son and I now both have Ipods. Can I set it up so my Ipod will auto sync my songs and his, his songs? Please step by step me...i know nothing Thanks

    Have a look at this article in the Apple Knowledge Base and let us know if it brings you any combination of joy and/or satisfaction.

  • How can I correlate two columns that belong to different worksheets?

    I am using beginner user of Numbers 3.2. I also thought of copying the columns of interest into a single sheet but don't know how to do so.
    Advanced thanks,
    Alex

    Hi alexander,
    If you are looking for a column that will update as your reference column changes, try this:
    In the first cell of your destination column type "=" (without the quotes)
    Navigate to your reference column and click the header of that column. Click the check in the formula editor. You are back at your destination cell.
    Copy.
    Click the destination column header and paste.
    quinn

  • Attach two Cinema Displays to MBP?

    can i attach two 2004 Apple Cinema Displays (23"   20") to my 15" 2011 MBP? I see some community references to external devices (Matrox or EVGA). Is there no way to do it using just some combination of DVI / miniDV / USB cables adapters? Thanks!

    Do your two displays have ADC (Apple Display Connector) ports, or DVI ports? If they have DVI, you can connect one to your MBP's Thunderbolt port with a mini-Displayport-to-DVI adapter and the other to a USB port with an adapter like this:
    http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/
    Note that the USB-connected display will be less responsive than the other.
    If your displays have ADC ports, you'll be stringing several adapters together just to get one of them connected, and I'm not certain that it will actually be possible to use either. Thunderbolt-to-ADC is very unlikely to have been tested by Apple, and given the high cost and difficulty of finding the long-discontinued ADC adapters nowadays, it would be a significant gamble for you to undertake the testing yourself.

  • I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should lo

    I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should look and B is what happens after I have I opened several tabs. I can get it back to normal if I click on VIEW than click on customize. When the customize window appears FireFox returns to its normal state. I than click on the done box and go back to what I have been doing. I tried resetting FireFox back to default settings, but that did not correct the problem.
    This began happening about a month ago. Is there a way I can fix this problem? Thanks for your help.I don't know how to attach my 2 attachments that shows the problem I am having.
    [email address removed to protect your privacy and security]
    <! [email protected] -->

    I found the images here: https://support.mozilla.org/en-US/questions/977542#answer-501598

  • I am using an NI PCI 6024 E board device for an analog output application. Can I generate two independent waveforms, one on each analog output channel?

    I am using an NI PCI 6024 E board device for an analog output application. Can I generate two independent waveforms, one on each analog output channel? In attach I send a example of my vi to control one chanel, but i need to control both but with diferent waveforms.
    Is the vi correctly programed to this propose?

    Yes you should be able to do that. look at the signal generation examples shipped with LabView
    You can create a 2 D array, with each row representing a wave form per channel. The number of points of the wave form (per row of the 2 D array) represent the number of points in the output buffer
    The wave forms can have different amplitudes/shapes, and therefore they are independent in this sense.
    However, you need to set the update rate,which is the same for both channels. The update rate together with number of points per buffer determines the frequency of the wave forms. This means the two wave forms will have the same frequency.
    To have different frequencies, you need to have say, on wave form with one cycle per buffer, and the other waveform have 2 cycles
    per buffer. in a case like that the frequency of the second channels is twice that of the first channel, and so on
    The two wave forms are then not truly independent, they may have different amplitudtes/shapes, but related in frequency.

  • HT204053 I have two iPads and one apple ID. How can I FaceTime to/from each iPad? Do I need to set up a second apple id or is there a way around this?

    I have two iPads and one apple ID. How can I FaceTime to/from each iPad without creating a new apple Id. Anyone know a way around this I.e trying to FaceTime 2 IPads that have the same apple id associated with them?

    Have a look here...
    setting-up-multiple-ios-devices-for-messages-and-facetime.html

  • Can I have two LANs with the same IP route to each other

    Hi there,
    I have a customer who has a televantage voip network on a private 192.68.0.0/24 network but has two sites connected via a wireless tower that wants to enable QOS over between the two sites by using a 2621XM router at each end. I've enabled QOS on both routers for voice and video but haven't deployed this yet since I'm not sure if I need to change one of the sites networks to a different network number since I'll have the routes in place with a 192.168.1.0 on the WAN side. If both remote networks stay with the same number scheme of 192.168.0.0/24 will they be able to find each other when requesting where a remote 192.168.0.0 host is or do I need to change of the offices networks to a 192.168.2.0 network to make this work? Sounds kind of basic but before deploying I wanted to get some input...thanks.

    Routers cannot route unless the address blocks for each interface are different.
    If you have two sites connected by any kind of link, and you'll use one site as a gateay to the Internet, then you'll need at least four different addresses/ blocks:
    The 'b' site LAN, i.e., fa/0/0:192.168.0.0/24
    The 'b' site WAN (interconnecting link), i.e., fa0/1: 192.168.1.1/30
    The 'a' site WAN (interconnecting link), i.e., fa0/1:192.168.1.2/30
    The 'a' side LAN, i.e., fa0/0:192.168.2.0/24
    (assumes that your wireless link is acting as a bridge or non-routing link) - the fa0/1 device connects to the wireless devices).
    If you use the same router on the 'a' side for the interconnecting link for both the 'a' LAN and the Internet gateway, then the third interface would be your Internet WAN address.
    The 'b' side LAN interface is your 'b' side default gateway for you clients
    The 'a' side LAN interface is the 'a' side default gateway for your clients
    Set a default gateway on the 'a' router to the ISPs Default gateway / next hop address.
    If you're using a third router for an Internet gateway, then the LAN interface address becomes the default gateway for the clients on that LAN, and you'll need to set up a static route pointing to the other LAN in the routers that connect the two LANs..
    A routing protocol may be useful but, depending on your actual bandwidth available, it's probably better to just set up static routes (no routing protocol bandwidth utilization).
    The /30 for the WAN link gives some economy of address usage, but it may also secure the link better, since there are no additional addresses for the intruder to use; they'd have to spoof one of the two valid addresses (.1 & .2) as well as crack your encryption (and / or other security).
    There's an armload of other possible configurations / topologies / address schemes, I believe this one would be reasonably common.
    The bottom line is that a router can only route from one address block to another. In order to pass traffic between two segments with the same address block, you need a bridge / switch, or some other layer one/two device (like a wireless transceiver pair).
    Good Luck
    Scott

  • Can I backup two devices (with different documents) to one iCloud account?  For example: iPad and iPhone, not everything is synced between the two, but I would like to backup each (seperately in the cloud), is this possible?

    Hello Apple Community,
    Can I backup two devices (with different documents) to one iCloud account? 
    For example: iPad Air and iPhone 5, not everything is synced between the two, but I would like to backup each (seperately in the cloud).  Is this possible?
    This way when I change from an old ipad to a new, I can restore with the ipad backup, and when I change from an old iphone to a new, I can restore from the
    iphone backup.
    Thank you in advance!

    Terminology check here. Do you really mean a "CD"?  There's a difference in Cloud behavior between content from a physical CD you ripped (which only has Cloud content if you have iTunes Match) and an "album" you bought from the iTunes Store.
    Read references for Home Sharing.
    iTunes: How to share music and video - http://support.apple.com/kb/HT2688 - about Music Sharing and Home Sharing
    Home Sharing Support page - http://www.apple.com/support/homesharing/
    iOS: Setting up Home Sharing on your device - http://support.apple.com/kb/ht4557 - "With Home Sharing in iOS 4.3 or later, you can stream your entire iTunes library over your home Wi-Fi network from your Mac or PC right to your iPhone, iPad, or iPod touch."
    The above can get pretty complicated.  You are probably best off by syncing both devices to a single library and/or updating the libraries on both computers to have the same content.

  • How can I attach j-pegs and other documents to an email unopened and stop each them taking up a whole page of my email ?

    How can I attach j-pegs and other documents to an email unopened and stop each them taking up a whole page of my email ?

    In addition to the last poster's suggestion  -  just so you know, it also depends on the email program the recipient uses as to how they will see any attachments - for instance, when I am using my Yahoo Mail, I am absolutely unable to view any attachment within the browser window - Yahoo forces me to download it; there is no way for me to check it (like a preview) to see if I want to download it or not.
    And, FWIW: the window shown in the screenshot does not show on my version of Mail 5.1 (which is the latest for 10.7.2); the only one similar shows when viewing a message received with an attachment, not while sending one. So that must be a different version.

  • If I have a repeating event in iCal, can I attach different docs, pdfs, etc., do the events. I am entering lessonplans and want each date to have an attachment.

    If I have a repeating event in iCal, can I attach different docs, pdfs, etc., do the events. I am entering lessonplans and want each date to have an attachment.

    Yes. As you edit each one, you will get a dialog asking whether you want to change all or just the current one.

Maybe you are looking for