Can I buy a new iMac with mini display connection instead of thunderbolt?

I have a 2009 MacBook Pro which I would like to connect to use the display & am aware that a 2009 MacBook will not connect to a Thunderbolt Display. My husband has a new MacBook Air which has thunderbolt, but I think he can get a thunderbolt to mini display connector for him to use.

I want to be able to connect my 2009 MacBook Pro to the display on the iMac. The reason I asked about the display is because I know thunderbolt is not compatible with a 2009 MacBook Pro.
From reading other posts I understand that the Cinema Display connections are compatible but not the Thunderbolt Display connection.
I am presuming that the display that comes with the iMac is the same as the Thunderbolt Display which can be purchased separately, but maybe I am wrong?
Thanks for your help.
Lynn

Similar Messages

  • Where can I buy a new iMac with Snow Leopard on it?

    Hi Folks,
    If I go to the Apple Online Store I can only purchase imacs with Lion on it.  My software does not run on Lion.  Where can I purchase a brand new iMac with Snow Leopard on it?

    It is a little late in the game to find one at Apple, much less one from an Apple Reseller like Fry's or Best Buy. For example, late last year I found a new 2010 Mac Mini that was still on Snow Leopard at the Sacramento Fry's, but it was there last one.
    Actually your best bet at this point in time, is to buy used from a private party or "yuck" reconditioned from a second hand reseller. 
    see > The Mac Store - Pre-Owned / Used Macs - Used MacBooks, Mac Pros & More
    or > Used Macs & Apple Computers - MacBook Pros, iMacs & Cheap Macs - All Tax Free | PowerMax
    and/or > Used Macs, Refurbished Macs, Buy and Sell - Mac of All Trades

  • Can't back-up new iMac with fusion HD.  The back-up proceeds to within 10% of the total storage needed and then the "of" number increases.  I suspect there is a problem with backing up the fusion drive.  We have a new 3 TB time Capsule.  Any ideas?

    Can't back-up new iMac with fusion HD.  The back-up proceeds to within 10% of the total storage needed and then the "of" number increases.  I suspect there is a problem with backing up the fusion drive.  We have a new 3 TB time Capsule.  I tried excluding different parts of the software from the back-up but it didn't make any difference.  I even tried exluding "invisible items" to no avail.  Any ideas?

    When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
    Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
    Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
    A full back-up on the iMac would be about 650 GB.  The partial updates that I have been trying start out at 115MB and keep growing indefinitely.  The original back-up never finished nor have any of the follow-up attempts.
    The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
    See A10 here.
    Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work.

  • When support After Effects Ray-traced 3D the GPU of the new iMac with retina display (GPU: AMD Radeon R9 M295X 4GB)?

    I would like to know whether After Effects CC Ray-traced 3D support the GPU of the new iMac with retina display.

    It never will. This is nVidia-exclusive technology and the whole things is deprecated, anyway. You better learn to use Cineware, buy a 3D program like Pro Animator or Element 3D or learn a proper 3D program.
    Mylenium

  • Installing Photoshop cc on a new iMac with retina display , but when PS opens , i receive following message;

    i installed photoshop on my new iMac with retina display. I worked always with a windows pc , and i am completely new in the macworld. When i opened photoshop the first time , i saw the following message ;
    open system preferences, click on design (in dutch it calls vormgeving) and switch off the function for smooth text for fontsize 8 and smaller to display the user interface off photoshop correctly.

    10.9: Ps Error message "...to display correctly...turn off text smoothing for font sizes 8..."

  • New iMac with Retina display has attracted a group of ants. Why?

    New iMac with Retina Display has attracted a group of ants to nest in it, while they ignore my old Macbook Pro. What is in the new laptop that attracts the ants? The Apple Support set me up with an appointment at an Apple Store and the Apple Store says it is Apple policy not to touch it with the Ants in it. Wasted 2.5 hours in travel time and in the store with no solution.

    Its the electrical charges that attract them, they sense them as other critters to eat / talk with 
    the swarm of tiny DC power fields inside a computer, and the charges across the screen attract insects that have EM sensors on their exoskeletons. Its a come hither spotlight for insect critters.
    http://answers.yahoo.com/question/index?qid=20070523002354AA340iK
    If you want them out, which of course you do.......make a sugar trap for them.... a trail from the computer to a little pile.  One screams the treasure to the others, .....they all come running, then you brush them away, or some other insidious method. 
    See this one:
    http://www.sfgate.com/technology/businessinsider/article/Crazy-Ants-That-Eat-Ele ctrical-Equipment-Are-4533102.php

  • Can I configure a new imac with separate ssd and hd

        I don't know for sure if it's been announced so this information may not be out there and I realize we are not supposed to speculate. Havinvg said that can anyone comment on whether it will be possible to configure a new iMac with both and SSD and HD drive without using a fusion drive?
       For video editing I don't think I want a fusion drive. I'm either going to get a refurb soon or wait ... and the whole fusion thing is such an unknown for video editing. If I order without more vid editing information  with regard to a fusion drive I'd probably want an SSD boot and internal.... I'd use my externals for most work but an ssd plus internal hd would be nice.
       thoughts?

    Based on the tech specs here, it appears the 27" iMac has one space for hard drive, fusion drive, or SSD, which are orderable on a build-to-order system.

  • A few questions before I buy a new iMac/Mac mini and sign up for Creative Cloud.

    Hello Everyone,
    I am looking to purchase a new Apple computer and sign up for Creative Cloud within the next week and I have a few questions that should be answered before I proceed.
    My wife and I own a business and we will be using the CS6 apps to create brochures, Constant Contact mailings, product package inserts, edit product photography for print and web use, and short HD how-to videos. We are not graphics professionals or power users and wont be doing anything too complicated.
    Any help and answers will be greatly appreciated.
    I will start with the hardware questions first:
    I am trying to decide between the iMac and the Mac mini.
    The iMac is a 2.7Ghz Quad-core Intel core i5 and comes with 4GB of memory that is expandable to 16GB, which I will do for sure. It comes with a Radeon HD 6770M graphics card with 512MB of GDDR5 memory(not upgradable), and a 1TB HDD that runs at 7200RPM. This unit meets the specs required.
    The 2.5Ghz Mac Mini comes with 4GB of memory that is expandable to 8GB, I will also do this. It has a Radeon HD 6630M graphics card with 256MB of GDDR5 memory(not upgradable), and a 500GB HDD that runs at 5400RPM. This unit meets all the spec(I think) except for the speed of the HDD.
    Question: Will the mini run the software without too much of an issue considering the speed of the HDD?
    Question: Will the iMac run the software significantly better to justify the price difference?
    I already have 1 mini(purchased 4 months ago, with the same specs listed above) and will be purchasing a second computer for my wifes desk. If the mini will run CS6 fine, that is great and we can save a few bucks. If my mini will not run CS6 well, I will get the iMac for her desk as she will be doing the bulk of the work in that regard anyway.
    Now a couple of software questions.
    After reading hundreds of reviews and forum posts over the last few days I have seen many people having this or that issue. It seems to me that most of the issues are because of upgrades from Lion to Mountian Lion after installing CS6 first or trying to open CS3,4,5 files in CS6.
    If you want to know what issues have me concerned take a look at just this one forum:
    http://blogs.adobe.com/jnack/2012/07/adobe-cs-apps-mountain-lion-no-known-issues.html
    Similar issues are discussed in the Apple forums as well as many other places around the web.
    I am not a computer professional but I know enough to maintain my systems and keep them running smoothly.
    We do not have any Adobe software installed on my mini and will not be opening any files from previous versions of Adobe product in the new CS6 software. These will be a clean installs on pristine systems running fully updated Mountian Lion OS's on both machines and creating new files from scratch.
    Question: Should I be expecting any issues like the ones I have read in the forums and blogs or are these just the normal things that happen when upgrading to new software with multiple hardware configurations?
    My feeling is that we will not be having too much of a problem due to the clean installs and no files from previous versions.
    Next up, the Creative Cloud(CC) FAQ states that you can install on 2 machines but can't open stuff at the same time.
    Question: Does this mean we can't be using any CS6 apps at the same time or just not using the same app at the same time?
    Example: PS and PS on both machines at same time = No, PS on one and Dreamweaver on the other at the same time=Yes?
    The CC FAQ page says Adobe will add Lightroom 4 later in 2012 while the main CC page lists it as available now.
    Question: Which is true?
    My mini is registered to me, with my name, iTunes account, Apple ID etc.
    Question: Do I need to do the initial set-up of the new machine with all my information to ensure the CS6 suite works on both machines? Do the computers need to be registered(as far as Apple configuration is concerned) to same person for them to work on one CC account or can I install CS6 on any 2 machines regardless of how they were initially set-up?
    This may seem like a silly question but I want to avoid any problems before they happen.
    Well, those are all of my questions at the moment. To anyone who made it this far in my looooong post, Thank You so much for your time. I appreciate your expertise and knowledge and hope that you can help me make this decision.
    Cheers,
    Alex Bogdan

    Alex,
    I'll try and answer your questions as best I can.
    Qn 1 Which Mac.
    Ans:- As I understand it both units will run Adobe CS6.
              Which one really depends on what you wand from CS6. If you are looking for high end demand and performance, then I would go for the IMac
              Your Specs for the Imac are right. However if you buy your IMac straight from Apple there are even higher specs.
              You can get:-
                                  3.4 GHz i7 processor rather than the i5
                                   2GB video card as opposed to a 1Gb video card.
                                   Of course such a model will cost you more.
              In the end it is needs compared with money to spend. That is only a decision you cam make.
    Q2:- Will the higher cost for the Imac justify copst.
    Ans:- Again it depends on what demands you intend to make on the hardware and software.
              But I note you have a business and if that businees expects to high demand and high speedy performance then I suspect the Imac would be more able to provide your needs.
              Again only you will know the answer to that.
    Q3:- Questions about CS6 reliability
    Ans:- I have been with Adobe for way over 10 years.
             Speaking, only for myself, it is the most reliable software on the market.
              It is true that if you look down this form, like any other and I am thinking about the Apple discussions forum, you will find numerous instances of problems.
              Again this is only my opinion, but although all these problems are real for the individuals:-
              First it is not clear why they have the problem e.g. what have they done or not done.
              Second, they are in the minority of the total users using the hardware / software.
              The only problem I am aware of with CS6 is Acrobat X. I understand it has been sorted Adobe, however it cost me so much work I have removed it from my system and reverted to Acrobat 9
              So what I am saying is that there are only two comapnies I rely 100% on: They are Adobe and Apple.
             So if you are happy with my opinion I would not worry about Adobe CS6
    Qn 4:- CS6 0n 2 machines.
    Ans:- Yes you will not be able to run the same program similtaneosly.
               I believe, if it is important that you do run the same program together, that you can acquire a further licience from Adobe to do that.
               You would need to contact Adobe about that.
    Qn 5:- Lightroom 4
    Ans:- Lightroom is now available as part of Creative Cloud.
    Qn 6:- Set up for individual machines
    Ans:- I do not believe you do. Once you have set up your Creative Cloud account you go to the apps site and download the apps for each machine.
              Each machine downloads the apps and your machine and the apps are registered by Adobe.
             Here is something that you may want to know:-
              Because I was so unhappy loosing all the Acrobat data with Acrobat X I ended up deleting Acrobat X
              However as far as Creative Cloud is concered Acrobat X is still on my machine.
              It is not a problem for me because I am happy with Acrobat 9, it fullfils my needs and has not crashed and lost me all my bookmarks.
              However here is the point:-
              Adobe, when there was a problem with Acrobat X requested that no-one deletes the application.
             Though I do not know for certain I believe registration of the apps you have with Creative Cloud are registered with Creative Cloud in their database. Therefore were you to delete an app, it will still be registered with Creative Cloud and you will not be able to download a further copy even though the app is no longer on your    machine.
              Therefore it maybe not a good idea to delete an app when you no longer have a use for it. If you want it back I suspect you will have to contact Adobe Support
    Personal Comment:-
              It is true many unfortunately have had all sorts of problems, including me with Acrobat X.
              That said, Creative Cloud in my view has been a major advance in how Adobe delivers software. I have no regrets with signing up to Creative Cloud and I expect to remain with it.
    Hope all of that goes some way to answering your questions.

  • HT2477 how can i macht my new imac with the macbook pro????

    I HAVE A NEW IMAC BUT WHEN A START IT THE FIRST TIME I DID NOT MACHT IT WITH MY OTHER MACBOOK PRO AND IPAD, HOW CAN I DO IT NOW?

    Csound1 wrote:
    Sorry, don't know what happened there you can boot to Recovery but you can't access DW, but you can make  boot disk on a USB drive (use DiskmakerX) and that will allow you to access DW (which does nothing useful on a new machine) Diskmaker X works with 10.7 to 10.9
    Thanks, I'll give that a try. The only thing I have to use as a thumb drive is an old iPod that's only a half a gig in size. I hope that's big enough!

  • Can you use the new iMac with FCS.

    This is one of those a friend of a friend of a friend told me this.  His friend, who shoots video that's shown on a local access channel, just bought the latest iMac.  I don't know what this person's set up is or what kind of equipment is, but he claims that he might have to upgrade his cameras because he can't import the footage.  I'm interested in investing in the new iMac but hesitate because I do a lot of amateur video work (weddings, birthday parties, etc.)  Anyone heard anything about this?  By the way, I use a two year old HD Sony video camera and use FCS 7.  All video is stored on an external hard drive.

    The current 27" iMac's with Thunderbolt will run the whole suite of Final Cut Studio apps just fine.  The catch will be your external Scratch Drive.  Until Thunderbolt drives ship in a couple of months, you're stuck with FW800, which barely cuts it for serious HD work.  Thunderbolt will change that.
    One option is to get the configuration that has both an SSD and a 1TB 7200rpm HDD drives in it.  The SSD would be your OS drive, the HDD your Scratch Drive.  That would work fine.
    As for professionals, I teach them, guys from huge cable news networks, who've been using FCP since v.1.  I'm amazed how many of them walk away even after the 1st day of class with whole new workflows.  You never stop learning in any profession.  The day you do, you're out dated.
    The model of Mac you use has nothing to do with your ability to import footage.  The version of FCP you use CAN affect that a great deal, though.
    Specifically what make/model camera do you plan to be using for this work?  BTW, weddings and events are a very profitable niche profession.  I have friends who make good livings for years doing only that.

  • Can I buy the new iMac in my Local Apple Store?

    I am located in Santa Monica. I want to buy the new 20 inch iMac. I went to the store before, but i couldnt find
    any brand iMac inside. May be they dide it in the stock?

    I got mine last week at the Apple Store in The Grove (Los Angeles). Call the store and see if they have any in stock.
    -Mason

  • Where can I buy a 27" iMac with Snow Leopard?

    Does anyone know? I can't afford a new computer AND to upgrade all the programs I have that could run on Rosetta.
    Thanks...

    This one came out in May 2011, which in theory should be able to run SL: http://store.apple.com/us/product/FC813LL/A
    This one from July 2010 comes with SL: http://store.apple.com/us/product/FC509LL/A
    Let the forum veterans chime in if the first one has been EFI-upgraded too fat to run SL again.

  • Can I buy a new computer with Snow Leopard?

    I tried Lion but I was very disappointed. Since I am planning to buy a new computer I would like to know if I can have Snow Leopard on it. On the Store I see "Lion included" everywhere and no option to have the previous OS version.
    Tanks
    Stefano

    Thanks a lot Thomas. That's unbelievable and it is really disappointing.
    To answer your question what I did not like was:
    - not to be able to customize the interface (e.g. up/down buttons in finder scroll bars, uncustomizable finder's side bar)
    - useless new features (e.g., launchpad - I do not need to use my laptop/desktop as if it were an iPad)
    - loss of programs (e.g, front row)
    - mission control is beautiful, but expose was helpful and I need the latter
    - versions and automatic save are not needed to me but I did not find a way to disable them. It looks they make my system slower
    - my macbook became generally slower, but I could cook eggs on it. Unfortunately I need a fast laptop and not a stove
    I hoped I could downgrade the OS, but it is not the case, so this time I am going to buy a Linux box. Hopefully next OS will be better.

  • Buying a new iMac with no cd drive, how do I upload purchased cd's to itunes

    Hi, I will be purchasing the new iMac in November which has no cd drive, how do I upload purchased cd's into iTunes?
    Thanks

    You will need to purchase an external optical CD/DVD disc writing drive.

  • Anyone else having trouble connecting MBP with thunderbolt port (TBp) and 27"iMac with mini display port (MDp)

    I have a 27" Imac.i7 with mini displayport and MBP13 i5 with thunderbolt port. Some time ago I tried to connect my old MBP with miniDP  to The 27"iMac I Failed so did the apple centre they refunded cable costs and said I'd be contacted by Cupertino. That was 9 months ago, now replaced MBP with 13 inch(**** I can use my iMac as display!). Does not work phoned Fast Lane very helpful guy called JIM emailed me some software/firmware update links.  Still no display linking. One of the links was for a couple of updates for a TBp equiped 27" iMac mine is only MDp equiped. Failing to find any MDp updates in apple support.  Anyone have any Ideas!  My lad has a later 27"i5 he uses Xbox 360 no problem on his but it wont look at my MBP.
    Beginning to feel like some of the kit that went with a fully loaded 5500 worked eventually. Computer and FM radio, Photography kit fine, video capture audio capture forget it.  Too many crashes and resets made it impractical. 

    Check discussion from  Linc Davis  on this thread
    Problems with Preview
    Similarly preview hangs opening files

Maybe you are looking for

  • Compatibility of Browsers with Netweaver CE 7.2

    Hi Experts,    We are using SAP Netweaver CE 7.2 and are trying the view a WebDynpro Application on the Mobile Device.   We have used the below devices but are getting some error message when using BarCode Reader and FunctionKey Controls. The Devices

  • CLOB to BLOB conversion to save space

    Hi Gurus, I am having a table with a CLOB column which I am asked to convert into BLOB and in the process save some space. But I am finding even after the conversion, it is taking same amount of space as the previous CLOB column. Is there any way I c

  • TCode for TDS annual Return

    Hi all, For Quarterly TDS return, TCode J1INQEFILE is available. What is the TCode available in SAP for the Annual TDS return?

  • Final Cut ERROR FRAME ? ERROR -1

    Hi, I have one big problem with my Final Cut Pro X, I just want to render video compilation (Share..) and it will make a error bar with problem ,,The operation could not be completed because an error occurred when creating frame 1288 (error -1). The

  • What is programcontext in previousMember(Level level, ProgramContext ctx)

    Hi, Wanted to check what is ProgramContext in the above call. Can someone give an example