Can I buy an imac without keyboard and mouse ?

Can I buy an imac without keyboard and mouse from an apple store ?

Call or email your Apple store and ask.  But I doubt that you can do what you want.  You might try a resller.

Similar Messages

  • Imac 20" keyboard and mouse not working

    Friend has a 20″ imac 2007 usb ports don’t seem to be working can’t use keyboard or mouse, anyone any idea how to get into the system to use a hardware test disc or install disc
    Power seems to be going to the mouse as the red light emits from the bottom.

    has anyone resolved this problem? I haven't been able to get my usb ports to work on my 2007 24" imac. it suddenly stopped responding to keyboard and mouse. during bootup, i can use the keyboard to select boot volume and/or target mode. keyboard and other usb peripherals work fine on other computers. so this indicates that the keyboard is ok, the usb port themselves are ok, but something happens during bootup that causes the computer to stop listening to the usb ports.
    i've tried the smc and pram reset procedures with no luck.

  • Can I buy an Imac on usa and can apple send it to Colombia?

    i wanna buy an imac but its too expensive in my own country, co i `d like to know if i can buy it in a usa mac store n bring it to COlombia...
    can i do it ?

    You could fly to the US, buy it, pay extra to bring it back with you on the airplane and pay duty on it. I doubt that will be less expensive. You cannot buy it in a store and have them ship it to Columbia.

  • Can I buy a windows wireless keyboard and use it with my MAC?

    Can I use any wireless keyboard with my macbook? I am eyeing a logitech wireless keyboard and want to use it with my macbook as it seems to be a good value. Any thing I need to be concerned of when making that purchase?
    <Post Relocated by Moderator>

    What's the model number for the one you're eyeing? Many Logitech products work fine with a Mac, but if you want to check for yourself, take a look through the logitech website: http://www.logitech.com/
    If it doesn't state compatibility with a Mac, there's still the possibility it will work. But if you want the least hassle, make sure the one you're looking at is Mac-compatible.
    ~Lyssa

  • HT4938 New mac-mini server setup without keyboard and mouse

    Im trying to use the server app to setup my new mac mini server without mouse and keyboard, but the server is not listed. I have tried using its IP address with no username and the serial number as password but it won't connect. Any ideas?

    You may have a version mismatch. If I recall, setup assistant is OS version dependent so if the refurb is 10.5 and the Mac Pro is 10.6 you will likely not be able to use setup assistant.
    However, just use ARD or Screen Sharing to connect. If the mini is visible on the network and in the ready for setup mode, you can ssh into the machine using the root user and the first 8 digits of the machine serial number. Then you can use the kickstart command to startup the ARD agent on the system. Use these commands while in the SSH session.
    cd /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources
    sudo ./kickstart -activate
    sudo ./kickstart -configure -access -on -privs -all -users <shortname>
    For now, the user will need to be root because there is no user. Then screen share the system to complete the remainder of the initial setup.
    In theory this will work. Works on Xserves, so I believe the minis work the same for initial setup.
    Hope this helps

  • I keep losing my connection from iMac to keyboard and mouse any help please

    I keep losing connection between imac and my mouse and key board.I then have to power off and reboot to get connection can anyone help please!!!!

    Hi
    Update date for anyone who ha suffered with the problem of losing connection to an ext HDD.
    For me, the solution appears to have been achieved by making use of my old 802.11 b&g Airport Extreme base station and my new 802.11 n Airport Extreme Base Station.
    My network is now setup as follows:-
    Airport 802.11 n - 5GHz
    Macbook Black
    Apple TV
    Time Capsule
    Airport Express Base Station
    Airport 802.11 b&g - 2.4GHz
    Playstation 3
    Xbox 360 Elite
    Nintendo Wii
    iPhones
    iPod Touch
    Canon Wi-fi Printer
    iMac G5
    Sony VAIO TX2P
    I connect my ADSL line to both AEBS by ethernet, changed the settings and this has dramatically improved my connection reliability and speed when streaming movies and/or music.
    Through trial & error, I have also discovered that the other problems that I have are connected to situations when restart my Macbook after a shut down or restart and my iPhone is connected. This causes iTunes to start up but due to the restart, the ext HDD is not ready and therefore, ITunes opens its local library - I now just try to remember to use the Option key to choose the library. Finally, if the laptop just runs out of juice, the ext HDD doesn't have the chance to have a friendly handshake before losing its connection. When I restart, the connection does to the HDD fails and I have to restart AEBS
    I hope that helps anyone with similar problems or who wants to make the most of their fast 802.11n equipment by making is use of that kit that was maybe considered redundant - by creating a dual frequency network that maximizes speeds on 802.11 n whilst allowing use of the legacy 802.11 b&g devices.

  • How can I remove keyboard and mouse, to use my iMac as a living picture?

    Hi
    I would like to use my old imac G5 as a simple viewer, just to read loop DVDs.
    I would like to hang my imac on the wall, without keyboard and mouse, and I get an error message "No keyboard detected, no mouse detected" and my living picture is wasted.
    Anyone could help me?
    Thanks in advance.

    Thanks Matt for your quick reply,
    But it's not real dvd, just a dvd disc file, and it will turn all year long with the same movie !
    Some kind of advertising…

  • My Keyboard and Mouse Quit Working and Computer Slow to Boot Up

    Last week my iMac wireless keyboard and mouse quit working. (Batteries are OK). That same morning the computer started taking a very long time - several minutes - to boot up. I've been using a wired keyboard and mouse but I'd rather get back to the wireless ones.  The other discussions I've read all refer to Bluetooth but I don't find  that on my computer. Help!!   Thanks.

    Hello cindycat,
    Love the name ... so evocative 
    Go to Apple menu > Systems preferences > Internet & Wireless.   There you will find bluetooth.   Click on it and In the bottom right corner is a purple ?.   Click on that to learn about setting up bluetooth.
    Incidentally, batteries are often not okay (though you may think otherwise).   The only batteries that are okay are top quality unused batteries.   And even then you should check the contact points inside the mouse in case there is corrosion.
    Keep us advised.
    71.

  • Can I buy an imac at the applestore and have it personalized (for example have it with the non wireless keyboard)?

    Can I buy an imac directly at the applestore (milan) and have it with a cables keyboard instead of the wireless one?

    Give them a call  >  http://www.apple.com/it/retail/storelist/

  • HT3924 can i use iMac keyboard and mouse when it is in Target Display Mode and attached to my MBP?

    I can attach my iMac to my MBP via thunderbolt and run it in Target Display Mode, so that itsimply becomes a screen attached to my MBP.
    What I really want is for the keyboard and mouse of my iMac to also operate as if they were attached to my MBP, but I cant seem to achieve this.
    Is it possible?

    Its a wireless mouse and keyboard - dont think I can re-pair the keyboard to MBP since I need it talking to the iMac to enable and disable TDM?
    I expected TDM to natively pass through the mouse and keyboard to the MBP, since that is the obvious user requirement. But this does not happen.
    So I guess I want a workaround so my iMac keyboard and mouse can drive my MBP while attached via Thunderbolt cable in TDM mode.

  • I have two IMacs and I want to set them up so i can use one keyboard and mouse-   How do i make this happen?

    How do i make it happen so I can use two seperate iMac computers as one set-up with one keyboard and one mouse?

    If the keyboard and mouse are wired, then a USB KVM switch will work.
    If they are wireless, you should be able to connect the wirelessly via Bluetooth settings. discover the same keyboard and mouse on each iMac.
    However, you cannot use them on each iMac simultaneously. I think it would be rather difficult for you to switch between them (disconnecting and reconnecting them over and over again).
    Most iMacs come shipped with a keyboard and mouse by default. How come you only have one keyboard?
    Keyboards and mice are not that expensive either.

  • IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive?

    IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive - which is still working? I took it to the Apple store and they quoted $500+to replace the monitor. No help as usual. Can I buy a MAC compatible monitor ($189) and use it as a primary monitor? Can I set it up if the screen on the IMAC is dead? Any other solutions?

    The only negative to not having the original drive will be the work needed to reinstall all the apps and reconfigure to your liking. You will also have to decide whether to stay on Lion (which you should update to 10.7.4, BTW) or bite the bullet and take a leap of faith on Mountain Lion.
    In either case, to simplify matters you would do well to concoct a Lion or ML bootable installer on a USB stick. In either case, you need to get the corresponding installer downloaded onto the hard drive and, instead of running it to execute the install, extract the coveted InstallESD.dmg image from which you construct the bootable installer. See here for details: https://discussions.apple.com/message/17782820#17782820  The procedure applies the same to both of the latest cat flavors.

  • Can I buy an iPhone without a carrier and use it as an iPod with...

    Can I buy an iPhone without AT&T or any carrier and use it as an iPod with a camera and a microphone?

    Apple Australia are selling the iPhone 3G for A$719, the iPhone 3Gs 16 GB for A$879, the iPhone 3Gs 32 GB for A$1040. No contract. After allowing for tax differences, at the moment these are around $100 more expensive than USA prices (Apple tend to set and keep prices relative to the date the item was released, regardless of further changes in exchange rates). This is about A$500 more than an equivalent iPod Touch, so you are paying a premium.
    I am also contemplating buying a replacement iPhone without a phone contract, as most of the time I do not need to use the amount of call time required by a contract. I can already change my data package on a month to month basis. My use pattern is generally a couple of months with no real need for a phone, followed by slightly less than a month of intensive data use, usually in remote areas. Also my partner really, really wants to grab my existing iPhone to replace the iPod Touch she grabbed earlier. The extra iPhone facilities really do give it a decent edge over the iPod. In particular, the always present camera proved way more handy than I ever expected. So I am being encouraged to upgrade.
    Still unknown is whether I can change SIM cards on an ad hoc basis. All major Australian phone companies sell iPhones (except most have stock shortages). Some carriers are only workable in major cities (but have cheap pre paid cards). Others are really expensive, but work well in country areas. Being able to run multiple appropriate SIM cards on different carriers would be really helpful.

  • Using Photoshop CC 2014 on a Windows Tablet without a keyboard and mouse

    Using Photoshop CC 2014 on a Windows Tablet without a keyboard and mouse can be quite a challenge. Even if you use the experimental 2x UI. You can not use your fingers or to quickly change tools and change settings. You have no shortcut without popping up Windows touch keyboard or leave it up taking a great deal of screen space.  If you're using the 2x UI Photoshop uses the screen at half resolution so it displays 1/4 the amount of pixels it could.
    Fortunately I found a little touchkey utility on the web the lets you design your own touch keyboards. The can be transparent and you can even paint under them as long as you start the stroke  outside the keyboard area. The keyboards can be toggles on and off so you can actually use Photoshop.  The utility is small and requires not installation can be run form anywhere.  I purchased a Surface Pro 3 a week ago.  Its a full fledge PC.  Through the home group I can access all machines in my house and using network shares I can access all files on my machines and the network drive on my router,  I can print on my Epson 4800 printer. I can show slideshow on my HDTV via   Bluetooth using a Microsoft wireless display adapter.   I can plug in my Wacom Intuos Pro wireless receiver into the USB  3 port and use my Wacom tablet.  Have a very touchy machine.  Touch on the keyboard touch pad touch on the Display display and on the Wacom tablet.  Could have touch on a mouse but I prefer the Microsoft comfort bluetooth mouse that has six buttons and a four way wheel.
    As a tablet its under two pounds.  Its quite impressive cost why mor the an iPad but worth the cost to me for with windows I can get at the file system.   If you have a Surface Pro 3 you should check out  "Touchkey" its handy.

    Do a screen screen capture and post it here so we can see what you stating about a white layout...

  • Keyboard and mouse won't connect to iMac

    This morning, I suddenly lost connection between my 27' iMac and the wireless magic mouse. I had just scavenged a pair of batteries from a remote control the other day and while I wasn't notified of low batteries this morning, I assumed those new batteries must be dead. So I replaced them with shiny new ones and.....nothing. Using keyboard navigation, I tried to re-connect but nothing would work. My next step was a restart. This is where the computer lost the keyboard. So, again, I replaced the batteries in the keyboard and went through the initial bluetooth setup assistant procedure when trying to restart without a keyboard. It would find the keyboard, connect to it and then immediately loose it. I never got enough time to enter the password confirmation the setup procedure gives you. I found an old wired keyboard and mouse and got logged in and I've been playing around with the bluetooth setup assistant with no luck. Both the mouse and keyboard go into "discoverable" mode when turned on (blinking green light) and the assistant sees them but will not connect. For the keyboard I get the message "the pairing attempt was unsuccessful. This configuration of Mac OS X and Bluetooth software could be invalid or unsupported." I'm running 10.6.7, update as prompted and haven't done anything out of the ordinary on this machine recently.
    Any ideas?

    Paul,
    I don't think you did anything wrong.  I think it was just "one of those things".  Things should be OK now.
    Give a shout if they aren't.
    Regards,
    Captfred

Maybe you are looking for

  • How to Clear Application Data on Macbook Pro?

    When I checked how much storage space I have on my mac, it shows that I have 99.3 GB of Applications. I checked the few applications I have in my Applications folder, and I'm positive it doesn't add up to 99 GB. How do i clear up this excess data?

  • Getting run time value on form field by sql query and function

    Hi All, we have below requirement - create a form with fields as below - KRA_Type Grade Weightage Start Date End date Functinal E2 30 1-Jan-2010 1-jan-2011 Organizational E2 70 1-jan-2010 1-jan-2011 lov of kra_type has 2 values (Functinal, Organizati

  • Subclass of abstract JDialog - NullPointerException

    Hello! I wanted to make an abstract subclass of JDialog that will handle a few things that are common to several of the dialogs in my program. Things like creating and setting up the Ok/Cancel buttons, handling the case where the user closes the dial

  • PCR link in MSS

    Hi All, When I go to MSS tab . I click on team then it shows two PCR link . But it supposed to show only one PCR link. Can you please tell me why it is showing 2 PCR link. Usefull answer will be awarded. Thanks

  • Will 10g release 2 core features suffice?

    Hi all, Could you please let me know the core features available with OWB10g R2. As we get OWB10g R2 along with the 10g Database free of Cost,I would like to know whether SCD-1,2,3 Process flows Scheduling options are part of this OWB1og R2(core vers