Can I change which nic is used for a cluster network when more than one nic on the node is on same subnet?

This cluster has been up and working for maybe a year and a half the way it is.  There are two nodes, running Server 2012.  In addition to a couple network interfaces devoted to VM traffic each node has:
Management Interface: 192.168.1.0/24
iSCSI Interface: 192.168.1.0/24
Internal Cluster Interface: 192.168.99.0/24
The iSCSI interfaces have to be on same subnet as management interfaces due to limitations in the shared storage.  Basically if I segregate it I wouldn't be able access the shared storage itself for any kind of management or maintenance tasks. 
I have restricted the iSCSI traffic to only use the one interface on each cluster node but I noticed that one of the cluster networks is connecting the management interface on one cluster node member with the iSCSI interface on the other cluster node member. 
I would like for the cluster network to be using the management interface on both cluster node members so as not to interfere with iSCSI traffic.  Can I change this?
Binding order of interfaces is the same on both boxes but maybe I did that after I created the cluster, not sure. 

Hi MnM Show,
Tim is correct, if you are using ISCSI Storage and using the network to get to it, it is recommended that the iSCSI Storage fabric have a dedicated and isolated network. This
network should be disabled for Cluster communications so that the network is dedicated to only storage related traffic.
This prevents intra-cluster communication as well as CSV traffic from flowing over same network. During the creation of the Cluster, ISCSI traffic will be detected and the network
will be disabled from Cluster use. This network should set to lowest in the binding order.
The related article:
Configuring Windows Failover Cluster Networks
http://blogs.technet.com/b/askcore/archive/2014/02/20/configuring-windows-failover-cluster-networks.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • I have an Airport Extreme which I'm using for a wireless network. Can I also plug in my iMac to one of the free ethernet ports on the Airport Extreme to connect to the Internet that way? Thank you.

    I have an Airport Extreme which I'm using for a wireless network. (The wireless router is connected to a DSL modem.) Can I also plug in my iMac to one of the free ethernet ports on the Airport Extreme to connect to the Internet that way? Thank you.

    Yes, you can.

  • Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes? Both my daughters have ipods, my wife has one

    Dear All
    Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes. My daughters have a different generation 'nano' each & my wife a 'shuffle'?
    Many thanks

    Click here for options.
    (69081)

  • Can I use my iTunes Store account with more than one PC ?

    Hi all,
    Am I able to use my iTunes Store account with more than one PC ?
    I use my account on my PC - but I would like to download the latest version of iTunes onto my Mum's laptop, log in to my own iTunes Store account and rent a movie for her to download onto the laptop.
    Is this possible and would I still be able to use my account on my PC at the same time?
    Many thanks,
    Steve.

    Good question.
    I don't think you can--if I'm incorrect, someone will tell me--but it seems to me to be easier to simply open an iTunes account for your mom. Then get her a gift card, load it into iTunes for her, and rent a movie that way. Not elegant at all...but workable.
    Doc

  • HT204053 for some reason i have more than one apple id, not sure how, must have set one up ages ago and forgot about it. can i delete one, or merge them? how do i know im not going to lose info if i delete one account?

    for some reason i have more than one apple id, not sure how, must have set one up ages ago and forgot about it. can i delete one, or merge them? how do i know im not going to lose info if i delete one account?

    You can neither merge or delete them. Pick one and stop using the other. If they both have purchases associated with them you will have to keep using both.

  • My husband has paired his phone using the remote app to the TV- I would like to do the same with my phone. Can we pair more than one phone to the tv using the remote app ?

    My husband has paired his phone using the remote app to the apple TV- I would like to do the same with my phone. Can we pair more than one phone to the tv using the remote app ?

    Yes I believe so. Try it and see you can always delete the Apple TV from a remote if it messes things up.
    But we have three remotes setup to do this. My iPhone and iPad and my wifes iPhone. She has a different iTunes logon but it seems to work fine

  • Use of layout when more than one parameter - Error Missing Parameter Values

    Hi,
    Is it possible to use a crystal report which has more than one parameter as the layout for the bill of materials report.
    I have 3 parameters
           1. DocKey@       The Bill of Materials to be printed
           2. Number of levels to be printed
           3. type of levels to print.
    When I try to print it gives me the error Missing Parameter Values.
    I have tried changing the DocKey@ to CodeKey@ but the same error.
    Does anyone now where to find a list of these tokens?
    Thanks
    Chris

    I looked at the crystal report conversion to try to find what parameters it used and found none.
    I have managed to create and use a crystal report to replace the production order using DocKey@ as the parameter.  This works within SAP.  However I have converted the system production order to crystal reports and from the converted report I cannot see any parameters at all.
    How and where can you find out what paramters you need to use to replace any PLD report?  Several reports have multiple selection criteria before the report prints.  How can you find out what their tokens are called?  I am starting to pull my hair out.  I am getting great help from this forum, but do you know any documentation which actually explains this area.
    Thanks
    Chris

  • Can i create more than one library on the same computer?

    Can I create more than one library on the same computer?  Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her.  When I deleted my albums from her library the disappeared from mine. (I think?)

    pajagsfan wrote:
    Can I create more than one library on the same computer?  Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her.  When I deleted my albums from her library the disappeared from mine. (I think?)
    I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library.  See if the files are elsewhere on your hard drive, or in the Recycle Bin.  When you find them, get them back into your own library.  Now you are ready to help your wife.
    As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly.  It is better to set her up with her own Windows user account. She can have her own iTunes library there.
    Get a copy of your entire iTunes folder to start her off.  She can delete stuff she doesn't want without messing you up.

  • Using more than one camera at the same time..

    Hello every body..
    I have a problem with dealing with java media frame work and i want to solve the problem as fast as i can since it will delay my work..
    I hope that any one can hep me..
    I post this problem previous but i don't have agood answer i want to knew if this problem can be soved or not and if can be solved How???
    The problem:
    If any one use JMF Studio it is known that any one can captre any device connected such as ( camera , mic,...) using JMFStudio..
    I do the capturing very well but the problem i face it is HOW I CAN CONFIGURE MORE THAN ONE CAMERA AT THE JMF??
    If i connect 2-cameras from different types ( sony , web cam) then the jmf registary will register the 2-cameras with only one difinition is( vfw:Microsoft WDM Image Capture (Win32):0 ) so when i use the java code to access the 2-cameras then i found only one difinition for one camera and i can access only one camera!!!!!!!!!
    I don't know how i can solve this problem??
    please help me !!
    For reply or any information contact me at my e-mail
    [email protected]

    Please Help me .....!!!!
    If the Sun Community Forums don't Help me who will help me at my problem??????!!!!!
    Help Me!!1

  • Can I add more than one movie to the movie page

    I'd like to put up a gallery of movies  but don't know how to do that.  How can I add more than one movie to the movie template page?
    Thanks,
    Gina

    I use the YouTube widget. It has the advantage of not loading clips until one actually selects the clip. When I started I just dragged the quicktime files to the page...not a good idea as it forced a viewer to wait for all of them to load.
    Miro has some options.
    Hugh

  • HT1657 Can you rent more than one movie at the same time?

    Can you rent more than one movie at the same time on itunes?

    I think Justin is correct and you should have statistics in place and a reasonable partition scheme so that the optimizer selects the correct partitions rather than telling it what to do. You paid a lot for partitioning after all.
    There are some, possibly misguided, examples in the manuals showing how to create a view so you can delete from a single partition without specifying the partition criteria in the delete statement. This in effect turns partitioning back into DIY partitioning i.e. separate tables, union all and pretend its a single logical table using a view. But backwards.
    So to do what you want you just assume the partitions are separate tables, and then use union all to glue the ones you want back together.
    select * from sales partition (sales_q1_2000)
    union all
    select * from sales partition (sales_q1_2001)
    union all
    select * from sales partition (sales_q1_2003)
    union all
    select * from sales partition (sales_q1_2004);It probably goes without saying that as well as making the expensive version of partitioning behave like the free alternative, there is the possibility that it will perform like it as well.

  • Jquery accordion where we can open more than one region at the same time

    Hi,
    I am trying to create a jquery accordion where we can open more than one region at the same time. I saw a post
    from patrick to do accordion where we can select only one region at a time.I am using Apex 4.0
    Using jQueryUI Accordion with APEX 4.0
    Any input on this will be appreciated.
    Thanks,
    Nav

    Hi,
    As I understand jQuery UI accordion do not have feature you looking for
    Regards,
    Jari
    Edited by: jarola on Sep 7, 2010 12:29 PM
    See documentation from here
    http://jqueryui.com/demos/accordion/#default

  • Add Suppporting Details for more than one periods at the same time for the same Account in Planning.

    As we know, in planning form, we can add supporting details to one cell for the level 0 members intersections.
    But can we do that as below:
    add supporting details for more than one cells at the same time?
    I tried to do that in workspace and smartview, neither is working.(my workspace version 11.1.2.2.300.20)
    I wonder if i am not with the right version, because i don't know how to get the below.
    Can any one explain?
    Thank you.

    Hi,
    I have tried in Smartview for a simple form where my period dimension was in columns and accounts in rows.
    You need to select multiple period and select supporting details, it will show those selected period for which you can add the supporting details.
    You can add these details and then submit the data in the form.
    Regards,
    Sourabh

  • In a hierarchical query, is it possible for a row to have more than one immediate ancestor?

    Hi
    Question:
    In a hierarchical query, is it possible for a row to have more than one immediate ancestor?
    Answer:
    No
    No?  Surely, it's yes?
    Thanks,
    Jason

    As Frank pointed out already hierarhical most often means a tree (data structure) to deal with.
    There must usually be just one boss (the root) in which case the answer is no.
    Something to read: http://en.wikipedia.org/wiki/Tree_(data_structure)
    You can find out Solomon spoke about a generalization therein.
    Related to forum troubles:
    If I login first thing after reaching forum, the behaviour is rather consistent - I'm allowed to post answers, otherwise ...
    Regards
    Etbin

  • Can you have more than one user on the new ipad?

    Can you have more than one user on the new ipad?

    You cannot set up more than one user account on the iPad if that is what you mean.
    Obviously families will share an iPad, but they are really meant to be single user devices with one Apple ID only on the iPad. Multiple ID's on one iPad can become a bit of a hassle to deal with.
    There is no way to lock apps or email accounts so that can become an issue as well. If you use the built in mail app for email, whoever is using the iPad can read your email.

Maybe you are looking for

  • How to view word document from report?

    We have one table with blob datatype and manage to save some document by creating form on this talbe. Through form we can see the document as default functionality of portal forms. But now we want to allow user to view this document from report as we

  • App Won't Install in New OS. What Do I Do

    Just installed new OS for iPhone. In apps I have a Groupon app. It says INSTALL. When I press it, it says WILL INSTALL. It never does. What do I do?  Thank you for any answers.

  • Nokia E61 - Connection Error

    I have a new E61 (from Vodafone in the UK). Most of the time it is fantastic - email, text, internet are all fine. However, over the last 2 weekends it has failed to make telephone calls. It displays "connection error" once it starts ringing the othe

  • Error #1009:appears when trying to moveti another frame

    Hi, I have a short animated intro that is added as a child to the stage. At the end of the animation this is my code: stop(); stage.addEventListener(Event.ENTER_FRAME, goNext); function goNext(e:Event):void{     MovieClip(parent).gotoAndStop("menu");

  • Change default Value Suppression

    Hi, i want to change the default value suppression to repeat in stead of suppressed. regards, Osman