Can I color a line of "standard text" in adobe forms output?

Simple question: Can I color a line of "standard text" in adobe forms output?
My standard text (SO10) has multiple lines. 
Can I make one of the lines red?
Ollie

Hi Oliver,
I believe you standard text is a table type of TDLINES.
On the form you would display it with a table of 1 column 1 row with repeat row ticked.
Have the like below code on the fomr ready event of your table.
for(var i =0; i<this.Row1.nodes.length;i++)
     if(i == 1){
     this.Row1.Cell1.font.fill.color.value = "255,0,0";
     this.Row1.xx.font.fill.color.value = "255,0,0";
Note: in my example I had a table with one row names Row1 and 2 fields cell1 type textbox,  & xx as text / label.
If its like you have it in a text box with multiple entries, we need to spli the value such that 1st row is displayed in a text box whose parameters are by defeult set to font red, and rest of them to this text area.
If your procedure is table the code sud work, else let me know how you get data and how do you display it on the screen.
Cheers,
Sai

Similar Messages

  • Standard Text IN ADOBE Forms

    Hi,
    Can you tell me how to use standard text in ADOBE forms,
    and how to fetch A Customs Tariff Number or an HTS (Harmonized Tariff System)
    from other system.

    Hi Oliver,
    I believe you standard text is a table type of TDLINES.
    On the form you would display it with a table of 1 column 1 row with repeat row ticked.
    Have the like below code on the fomr ready event of your table.
    for(var i =0; i<this.Row1.nodes.length;i++)
         if(i == 1){
         this.Row1.Cell1.font.fill.color.value = "255,0,0";
         this.Row1.xx.font.fill.color.value = "255,0,0";
    Note: in my example I had a table with one row names Row1 and 2 fields cell1 type textbox,  & xx as text / label.
    If its like you have it in a text box with multiple entries, we need to spli the value such that 1st row is displayed in a text box whose parameters are by defeult set to font red, and rest of them to this text area.
    If your procedure is table the code sud work, else let me know how you get data and how do you display it on the screen.
    Cheers,
    Sai

  • How to Print 25page standard text in Adobe form

    Hi Form Gurus.
    My requirement is to print a 25 pages form of standard text. Can any one please help me.
    Thanks in advance.
    Regards
    ASAHA1
    Moderator message: please work yourself first on your requirement, post specific problems later if necessary, always search for information before asking
    locked by: Thomas Zloch on Aug 31, 2010 9:11 AM

    hi,
    You can create a text module like you do for Smartforms and then you can add that in the interface and drag n drop it in the layout.
    regards,
    Sakshi

  • Standard text and Adobe forms

    How do you get a standard text created w/ SO10 displayed on the PDF? Can it also have the same formatting... bold, underline, etc.?
    Currently on ecc 7.0.

    This is where some training may be helpful....
    I now have the context tab in SFP by changing the interface type on the interface attached to the form to be dictionary based. This allows me to add the text as you mentioned. The form has ZCI layout assigned.
    But now my webdynpro is having issues calling the form. In my webdynpro my template source is the same as the sfp form name; but as I assign the pdfsource and datasource they are either removed and/or changed to a dummy value that is added to my context with no nodes or attributes.
    This application currently runs in a production environment. All I was trying to do was add a standard text element to the form.

  • Standard texts in Adobe Forms ??

    Hello,
    I know how to work with standard texts (SO10) in SAPscript and Smart Forms but not with Adobe Forms. Can someone explain ??
    Thanks !!

    Hi,
    you can do it in context of the form. Just go to context and create text and in properties node u can make it include text .
    Atul

  • Standard text in Adobe form

    hi all,
            I would like to know how to add standard text (from SO10) in adobe form?
    Regards,
    Vinod.

    Creating a Text node by right clicking on the top node in the Context Tab of the Form and then
    CREATE -> TEXT.
    In the properties of the TEXT node select Text type Include Text and then provide the Text Name, Text Object, Text ID and Text Language values

  • Standard text in smart form

    Hi,
    can anyone tell me how to include standard text in smart form
    Thanks

    Procedure
    1. To create a text node, call the context menu for that node in the tree structure that shall
    receive the text and choose Create Text.
    2. Enter a unique name for the node and a node description (for example, letter).
    3. On the General Attributes tab choose Include text as text type.
    Since you edit a text element, an included text, or a text module exclusively via the
    text node, the system stores only information on the selected type. When you
    change the text type, the system therefore asks for your confirmation.
    4. In the Text key box, identify the include text.
    To identify individual text objects, use the search help in this field.
    The search help of the Text name field allows you include the attributes of SAPscript
    texts into the search.
    7. If required, use the Paragraph formats box to format the include text:
    The style assigned to the text node contains a format for the standard paragraph ('*'). If you enter a paragraph format in the Standard paragraph field, this format overwrites the style format for all standard paragraphs in the include text that use this paragraph format.
      Use the First paragraph field to set a paragraph format for the first paragraph of the
    include text. This format also overwrites the format set in the style. If you set the First
    paragraph field but leave the Standard paragraph field empty, the system uses the
    format set in the First paragraph field for any standard paragraphs in the include text.
    6. In the Text node box choose whether you want the text to start in a new paragraph, in a new
    line, or directly at the end of the current paragraph.
    7. If desired, choose the Output Options tab to maintain the style or box and shading
    of the text.
    Result
    The system displays the node in the tree structure, including its name and description. The
    included text is included only at the moment the form is processed.
    Regards

  • Standard text in Smart forms

    Hi ,
               Im using the standard text in smart forms, but Im getting the output displayed as hexadecimal numbers. These are the hexa characters stored in the "SO10" transaction for the standard text name.
    I try to display a signature stored in standard text.
    But when used in SAP scripts I get the content displayed correctly.
    Can someone help me to display the content in smart forms as such.
    I searched the forum for the solution I got some results for the search but I did not get the solution for it.
    Points will be rewarded for helpful answers...
    Rgds,
    Sarath.
    Message was edited by:
            Sarath kumar Chandrasekharan

    Rama,
    The problem is the signature is in standard text.
    Message was edited by:
            Sarath kumar Chandrasekharan

  • Formatting Issues with SO10 text in Adobe forms

    Hi Everyone,
    I Have the below text maintained in SO10.
    "Thank you for choosing Enterprise.  We look forward to seeing you at 9:00 am on Monday, November 28, 2011.  This message is to confirm you have updated your reservation.  Following are the details for the updated reservation:
    P.S. Remember us when you're renting in town.  Enterprise is always nearby at more than 6,500 neighborhood locations."
    I have created an text module of type include text in Adobe form context. the text which has to be bold is not being displayed as bold and the line space after first paragraph is being skipped out and the 2nd paragraph is being displayed as the continuation of the first. The out put looks as below
    "Thank you for choosing Enterprise.  We look forward to seeing you at 9:00 am on Monday, November 28, 2011.  This message is to confirm you have updated your reservation.  Following are the details for the updated reservation: P.S. Remember us when you're renting in town.  Enterprise is always nearby at more than 6,500 neighborhood locations."
    I tried Styles using SE72 on the SO10 text. And I cannot assign smartform styles on SO10 text in Adobe forms.
    Greatly appreciate your suggestions and solutions.
    Thanks,
    shalini

    Thanks Rakhi, but that did not resolve my issue. Below is new out as per the thread suggestion and this is not what I wanted.:
    "<H>Thank you for choosing Enterprise.</> We look forward to seeing you at 9:00 am on Monday,
    November 28, 2011. This message is to confirm you have updated your reservation.
    Following are the details for the updated reservation:
    P.S. Remember us when you're renting in town. Enterprise is always nearby at more than 6,500
    neighborhood locations."
    - shalini

  • Using formats of SO10 text in Adobe forms

    Hello guys,
    I got a question concerning the interaction of SO10 texts with adobe form text fields.
    I know there are some threads about it here, and I think I understand the default SAP behavior, but can you please confirm if I am right? Then I got a special question about one case.
    So is it right that there is only the difference between formatting the textfield itself in adobe form layout and adding a style to the text field in form context?
    This means:
    (1) Whenever in my text field in form context no style is added, the adobe form will take the formatting like it is done in the adobe form layout? This would mean that every format which is entered in the SO10 text is insignificant for the adobe form?
    (2) Whenever in my text field a style is added, SAP will use SO10 text formats? This means, SAP searches for the smartforms style which is entered in the textfield and uses the formats from SO10 text like they were defined in the smartforms style?
    Is this correct so far?
    Now the special questions:
    (1) What happens if a style is added, but the style does not exist as smartforms style. Which font etc. will be used then?
    (2) What happens if a style is added, but the format of SO10 text does not exist in the smartform style?
    In both cases it looks like SAP takes some "default" style, but where does it come from?
    Thanks a lot!
    Regards
    Michael

    Thanks Rakhi, but that did not resolve my issue. Below is new out as per the thread suggestion and this is not what I wanted.:
    "<H>Thank you for choosing Enterprise.</> We look forward to seeing you at 9:00 am on Monday,
    November 28, 2011. This message is to confirm you have updated your reservation.
    Following are the details for the updated reservation:
    P.S. Remember us when you're renting in town. Enterprise is always nearby at more than 6,500
    neighborhood locations."
    - shalini

  • Static text in Adobe forms

    Hello Experts,
    I have requirement to create a adobe form which have 90% of static text .I want to know to display those text should i go with standard text(SO10) ot should i directly display it in text-field on the form layout.Or there is any other way to display.
    Which is best? Kindly suggest.
    Thank you,
    Shweta

    Hi Shweta,
    I started working on adobe in late 2010. I prefer and would personally go for SO10 instead of adding  text in text-field. Adding texts under one TextName would give a clear picture for further enhancements instead of adding the texts one by one in text fields.
    We do have a Wiki on SCN about adding static texts to adobe forms using SO10.  Here it goes:
    [Using of Standard Text (SO10) in Adobe Form|http://wiki.sdn.sap.com/wiki/display/ABAP/UsingofStandardText(SO10)+inAdobe+Form]

  • Trouble with xhtml text in adobe forms

    Hellow!
    I try to show xhtml text in adobe forms
    I pass string as text value to element like this::
    <html  xmlns="http://www.w3.org/1999/xhtml"
    xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/"
    xfa:APIVersion="2.4.5325.0">
    <body> <p>Hellow, world!</p></body></html>
    Next, in Initialization text element event I do next: 
    $.value.#exData.loadXML($)
    So In adobe form I see text "Hellow world", it means that html support works.
    But
    If a Pass Next text
    <html  xmlns="http://www.w3.org/1999/xhtml"
    xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/"
    xfa:APIVersion="2.4.5325.0">
    <body> <p><strong>Hellow
    </strong>world!</p></body></html>
    I see only "world!". Text between <stromg></strong> tag dosn't display.
    What I do wrong? Why xhtml text works, but it don't understand <strong></strong> text?
    (The value I get from WEB DynPro application)
    Edited by: Mordyasov Petr on Jul 16, 2010 9:43 PM

    Use
    <b>
    instead of
    <strong>
    See http://partners.adobe.com/public/developer/en/xml/xfa_spec_2_5.pdf -> Part 3 -> Rich Text Reference for a list of supported xhtml tags.
    Sebastian

  • Can any one please send me study material on ADOBE forms (used in SAP)

    Can any one please send me study material on ADOBE forms (used in SAP).

    Hi,
    http://wwwimages.adobe.com/www.adobe.com/enterprise/partners/pdfs/bwp_interactive_forms_adobe.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4132
    https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken]
    https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken]
    /people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/4adf7ba13c4ac1b4600d4df15f8b84/frameset.htm

  • Empty layout for standard AD PROOF adobe form.

    Hi ,
    I am able to generate a PDF file by using a standard  AD PROOF adobe form but when i go to transaction SFP and check the Layout of the form ,it is coming as empty. Then my question is how is the PDF generated.?
    Please help.
    Thanks in Advance..
    Paresh

    Moderator message - Cross post locked
    Rob

  • How can I initiate a transport of Standard Text over to another client

    HI,
    I need to re-create all the customized standard text in our new ECC6.0 box. Afte creation, I want to transport it to the QA for testing and eventually to the new ECC 6.0 production.
    While creating the text, it does not trigger any transport request.
    How can I initiate the Transport request?
    I had explored and found that it is also possible to upload to the destination. I would prefer the Transport method.
    Can someone advice?
    Thanks
    Thanks

    The program name is RSTXTRAN. run from SE38
    detailed documentation is here.
    Symptom
    This is a brief guide to RSTXTRAN
    More Terms
    RSTXTRAN, Transport of SAPscript Texts, Standard Texts
    Cause and Prerequisites
    Solution
    Basic Background
    You want to transport SAPscript Texts from a source system to the target
    system. You can do it in different ways. If you want to copy texts within a
    system from one client to the other you can execute the report RSTXTCPY. In
    other cases, i.e. transporting the texts between the different systems, you
    can use the report RSTXTRAN. This report (RSTXTRAN) itself does not perform
    any transporting but is used to prepare a Transport Task (TT). Having
    prepared the TT with RSTXTRAN you have then to release it and the
    corresponding Transport Request (TR) in a normal way (e.g. with an
    assistance of Customizing Organizer - se10).
    Please note the Type of Transport Requests (WBO or Customizing) depends on
    the system settings.
    Working with RSTXTRAN
    1. Execute the report RSTXTRAN (e.g. within the transaction se38)
    2. On the selection screen appeared you may specify:
    2.1. Name of the Transport Task (TT). Make sure you specify the
    Transport TASK number, NOT the Transport REQUEST ! You may leave this
    field empty if you did not create to this moment the appropriate TT.
    Later you will be able to create it within the report.
    2.2. Text Key. This composite key consists of four fields: Object,
    Name, Id and Language. You may specify these fields also generic
    (caution: until Rel.4.6A you have to specify \'*\' if you need a generic
    selection; leaving a field empty will cause a search for the blank
    field that usually returns no results!). This key serves as
    preliminary search restriction only and does NOT mean all the texts
    which satisfied the specified key must be included into TT.
    3. Having specified some fields on the selection screen you can go
    further with \'Execute\'(F8).
    4. On the screen appeared you will see the list of texts that satisfy the
    specified restrictions. By default all the texts are selected for
    including in the TT. You can deselect all the texts or select all of
    them again using the function \'deselect all\' or \'select all\'
    respectfully. Certainly you may select the texts individually as well.
    In order to proceed you have to use function code \'continue\' clicking
    on the icon \'OK\' or pressing the button \'ENTER\'.
    5. At this stage you get another list of texts that already exactly
    defines the list of texts to be included in a Transport Task. You
    cannot change this list any more. If you want to change something (add
    new texts or exclude any of them) you have to go one step back (F3)
    and update your selection. You can now include this list to the TT by
    pressing the button in the toolbar \'Transfer texts to correction
    request\' and confirming the action.
    6. If you have left the field \'Name of Correction\' empty on the first
    selection screen you will then be asked to provide the Transport
    Request number. You can select it from already existed ones or create
    a new one. However if you specify anything(!) in the field \'Name of
    correction\' on the first selection screen and the specified TT does
    NOT exist (generic input is not allowed there) you will get an error
    message \'Request/Task xxx does not exist\' (TR 806). In that case
    please go to the first screen and fill out this field correctly, or
    leave it completely empty. Then repeat the selection again.
    7. When you have performed all the steps properly you get a message the
    selected texts were included into TT. Now you can leave the report and
    release the appropriate Transport Task/Request in Customizing
    Organizer (se10).
    Edited by: Henry Hsu on Nov 27, 2010 3:37 AM

Maybe you are looking for