Can I connect my 20" Cinema Display to my new mac mini?

Is there a connector available for this? Cinema Display connector is not same size as DVI connection.

If an ADC connector
http://en.wikipedia.org/wiki/Apple_Display_Connector
If so you need one of these:
http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2/ref=cm_cr_pr_p roduct_top
Otherwise what connector is on the monitor?
The 20 inch model A1038 has the ADC while the A1081 has DVI

Similar Messages

  • I'm trying to connect my 30" Cinema Display to my new Mac Pro along with a new Apple 23'" monitor.  The new Apple monitor is fine.  On the cinema monitor everything is blown up pretty large.  Any ideas on how to solve this?

    I'm trying to connect my 30" Cinema Display to my new Mac Pro along with a new Apple 23'" monitor.  The new Apple monitor is fine.  On the cinema monitor everything is blown up pretty large.  Any ideas on how to solve this?

    The 30" display needs a DUAL-LINK adapter.
    <http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter>

  • How to connect an Apple ADC display to a new Mac mini?

    Has anyone found a way to connect the brand new mac mini, either HDMI or micro to an older Apple display that has an ADC connector on it? Where to buy - the Apple store does not have their DVI to ADC adapter. Thanks.

    I found one here for $139:
    http://www.sunsetmac.com/apple-accessories-apple-video-adapters-c-133_134/apple- dvi-to-adc-cinema-display-adapter-661-4262-new-p-604

  • Can I use my iMac's display for my new Mac mini?

    I have an Intel-Based iMac. I just purchased a mini with no monitor. Can I use the display on my iMac as the monitor?

    Thanks Dave. But I'm still left with a problem: I don't have a stand-alone monitor! Now here's another posting I found:
    +*Setting Up a Headless Mac Mini without a Monitor*+
    +I only have laptops and no external monitors, so I needed a way to setup the Mini without a monitor. It was really easy, following these steps:+
    +-connect a keyboard to the Mini+
    +-start the Mini in FireWire Disk Mode+
    +-connect the MacBook Pro to the Mini with FireWire cable+
    +-restart the MBP using the Mini as the boot disk+
    +-setup the Mini with network access and remote management (Sharing)+
    +-reboot the MBP with its own disk+
    +-disconnect the Mini and reboot+
    +Voila! Now you should be able to use Screen Sharing over your network to remotely control your Mini-no keyboard or mouse required.+
    Well, I do have a MacBook Pro. So can I set up my new mini like this?

  • How can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I have ask this question in the local shop but they could not answer me - how can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I wasn't sure how the whole thing would have work but it seems thunderbolt also acts like mini display port. Thats sweet. I can now haply continue using my 30 inch apple display.
    Thanks.

  • Can I connect a 27" Cinema Display to an ageing iMac? I have a Mini-DVI to DVI Adapter fronting a Kanex C247DL to complete the MIni-DVI to mini display port. Sound is good but screen is black.

    Can I connect a 27" Cinema Display to an ageing iMac? I have a Mini-DVI to DVI Adapter fronting a Kanex C247DL to complete the MIni-DVI to mini display link. Sound is good but screen is black.

    Hey phil staton, highland,
    Thanks for using Apple Support Communities.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Have a nice day,
    Mario

  • What cable do I need to connect a 30in Cinema Display to a 2013 Mac Pro

    what cable do I need to connect a 30in Cinema Display to a 2013 Mac Pro

    No.
    <http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter>

  • Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?

    Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?

    Hi,
    Create a play list that you wish to burn. Select playlist, the file from main menu which gives to an option to burn the playlist. A pop up box appears allowing you to select burn speed and disc format.
    Jim

  • I have an imac bought late 2013, can i use it as a display for the new mac pro running windows 8 through bootcamp?

    I have an imac bought late 2013, can i use it as a display for the new mac pro running windows 8 through bootcamp?

    No. Target Display mode is only supported when connected to a Mac running 10.6 or later.
    It cannot be used with a PC, bootcamp, gamaing console, cable box, DVR or PowerPC Mac.
    http://support.apple.com/kb/ht3924

  • I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

    I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

    Yes, it supports target display mode. Windows can be run with either Parallels or Boot Camp.

  • Using An ASD LCD display with a new Mac Mini

    I want to utilize a 17" Apple Studio Display with my new Mac Mini.
    Does HDMI support the 35-pin Apple Display Connector (ADC)?
    It would require an adapter with female 35-pin on one side and a male HDMI (DVI) on the other. The Apple DVI to ADC adapter doesn't work with the Mac Mini HDMI port.
    If two adapters are needed they must have the correct gender connections.
    Thanks.

    Your correct, you would need an Apple DVI to ADC adapter, And ether mini display port to DVI OR HDMI to DVI adapter. (just a question of witch port you want to use)
    Apple DVI to ADC adapter when they were first released cost about 120; now they're kind of rare and harder to find. Online they can go for 200 dollars. so 120 to 200 dollars to make your display work; and displays don't last for ever they have parts that will break down. Older displays have a light bulb inside them; witch burn out just like all the other light bulbs in your house.
    Also DVI to ADC adapters can some times give you blurry images and or text.
    For 120 dollars you can buy a generic brand 19" LCD. That 19" LCD would have better contrast ratio, brightness, and refresh rate then the old 17" monitor. (and it would have a warranty) Or for 200 dollars you could buy 23" monitor.

  • Can I use my old apple monitor with a new mac mini?

    Can I use my old apple monitor with a new mac mini?

    Probably.  Any information about the monitor?

  • Can I connect a 24" Cinema Display with mini DisplayPort in to HDMI out?

    I have a 24" LED Cinema Display that I want to use with a new 15" Retina MacBook Pro I will soon be purchasing. Using cable adaptors, would it be possible use the new Macbook Pro's HDMI port to connect to this Cinema Display? I understand that this does not work with the newer Thunderbolt displays because Thunderbolt only adapts in one direction, but since this is an older Mini Displayport monitor would it work? My goal is to keep both Thunderbolt ports available for storage I/O untill Apple releases an update to the Thunderbolt display later this or next year. Thanks for your advice!

    Yes, in this scenario, I'd connect the display to one of the Thunderbolt ports and use a USB hub for additional I/O. Here's my current I/O needs:
    1) esata (with port multiplication)
    2) gigabit ethernet
    3) firewire 800
    4) USB keyboard
    5) 3-port USB hub (iOS, bluetooth charger, misc USB2 or 3)
    6) monitor
    My current plan is to use
    1) thunderbolt 1 - display
    2) thunderbolt 2 - firewire 800
    3) USB3 1 - esata
    4) USB3 2 - USB3 hub - gigbit ethernet and all other USB devices
    Does this seem like a resaonable set-up in terms of maxing I/O bandwidth? My main concern is if the USB2 devices on the USB3 hub will throttledown my gigabit ethernet speeds.
    Thanks for your advice!

  • TS3477 How do I connect my HD Cinema display unto my new MacMini?

    I just purchased a new  Mac mini but want to continue using my HD Cinema display. My HDMI connector does not fit into my new Mini. Can I find hardware so I can connect to my new Mac mini?

    Which disply?
    http://en.wikipedia.org/wiki/Apple_Cinema_Display
    The M8563 uses an ADC connector and you need one of these
    http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2
    If A1082 or A1083 you may need a duela link adopter
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter

  • Can I use my iMac with a thunderbolt connection as an Display for my new Mac Mini with thunderbolt ??

    Can I use my new Mac Mini with Leopard and thunderbolt in connection with my new iMac as a display ?

    If it's a 27" iMac. I don't believe Target Display Mode is supported on the 21" model. But not with a Mac Mini running Leopard. It would need to be running Lion.

Maybe you are looking for

  • 'SAPSQL_ARRAY_INSERT_DUPREC' error while cancellation of credit memo.

    Hi, I'am cancelling a credit memo created through 'Sales Return'.When I save the document it gives the message that billing document is created, but just after sometime it shows 'Error info...   00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC. I

  • Satellite C850 - boot from DVD issue - want to replace Win8 with Win7U

    Got a new C850-1JZ yesterday and am trying to replace pre-installed Win 8 with Windows 7. I did create the recovery media (3 DVDs). The laptop is driving me "insane" as it seems to block any attempt to boot anything else other than Win8 on the preins

  • Fire a left click when the right button is pressed

    I am working on a small program with a text area and mouse functionality. I have all my listeners in place but I need one additional feature and I am unsure how to go about implementing it. I want to be able to fire a left click when the right button

  • WRT54G2 Install Error(Different Please READ!)

    So I have a WRT54G2 router that doesn't install correctly. I have installed it once before but I moved and I was given a new router/modem that I was heavily unsatisfied with and so I want to switch it for my WRT54G2 but the error 322 pops up after fa

  • How to install Laptop UI for xMAM 3.0

    Hi All, We are implementing xMAM 3.0 and devices are going to be Laptops. I know about the PDA UI (Mobile Client Frame Work) installation. How and where can I get the Laptop UI files. Is procedure same for PDA UI and Laptop UI or different. Please ad