Can i connect my cintiq 12wx to my Macbook pro 2011 through the thunderbolt using the mini display port to vga adaptor?
I just bought my cintiq 12wx and was wonderding if i can connect it to my macbook pro 2011 through the thurderbolt using a mini displayport to vga adaptor? Please help!
Yes, it should work with a mini-displayport to VGA adapter. Since a 12wx also can take DVI you could use a mini-displayport to DVI adapter instead. Why go analog when you can keep it in digital!
I guess the usb is for the pen.
Similar Messages
-
I need to connect a computer monitor to my mac book pro, using a mini display port to VGA adaptor. But have experienced a drastic reduction in font size on my
Mac screen even before I have managed to check the result on the monitor screen. Please how do I compensate for this and restore my mac screen appearance?
Many Thanks Alangium in ukHi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy -
Can I use a mini display port to VGA adapter and then a VGA to av adapter to connect my MacBook pro to my standard definition tv?
No. You need a converter box like this to go with your MDP-VGA adapter:
http://www.amazon.com/PC-To-TV-Video-Converter/dp/B001CJOLBW/ref=pd_cp_e_2 -
Connect MacBook Pro 3,1 to hdmi tv via mini-display port
How do I connect my MacBook Pro 3,1 (2007) to an hdmi port on a LCD TV using the mini-display
port on my Mac? I am running Snow Leopard 10.6.8.
I have connected a mini-display to hdmi connector into an HDMI port on the TV. I've watched lots of youtube videos
on how to do this (apparently with newer Macs), but when I go to 'system preferences/displays', I have no options like 'extended TV'
or 'mirroring' and I have no resolution choices with a 'p' behind it. I've tried 'command-F1' as someone
suggested to make it 'mirror' and nothing happens.How do I connect my MacBook Pro 3,1 (2007) to an hdmi port on a LCD TV using the mini-display
port on my Mac? I am running Snow Leopard 10.6.8.
I have connected a mini-display to hdmi connector into an HDMI port on the TV. I've watched lots of youtube videos
on how to do this (apparently with newer Macs), but when I go to 'system preferences/displays', I have no options like 'extended TV'
or 'mirroring' and I have no resolution choices with a 'p' behind it. I've tried 'command-F1' as someone
suggested to make it 'mirror' and nothing happens. -
I tried to download a firmware update but my MBA said the update was unsupported. I'm not super tech, so I'm kind of at a loss. Ultimately, I want to mirror my iPad to the classroom projector so that I can move around while I teach.
Hi Teachingmyself,
Thanks for visiting Apple Support Communities.
If your MacBook Air and projector are not communicating, I recommend the troubleshooting tips found in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Start with these steps:
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Reset the system
You can reset the Mac's parameter RAM and SMC.
Best,
Jeremy -
I no longer have any sound on my macbookpro 10.6.8, not even beginning chime.
Furthermore, I find that I no longer have any images as well as no sound, from any
of my Itunes cinema, tv show purchases, etc.
I recently watched last week a couple of tv episodes through my TV
using a Mini Display Port + Toslink Audio purchased at Apple.
I use this device occasionally and haven't had any problems til now.
Any suggestions to right the problem?.In System Preferences>Sound do you have your internal speakers set as the output source?
You may have toggled on optical output with the Toslink cable - check to see if there's a red light coming from the port. If so, quickly plug and unplug a set of headphones for a number of times to see if you can toggle the switch back from optical to the internal speakers.
Good luck,
Clinton -
Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Hi!
Didn't know exactly where to direct this question in the Apple Community so I chose Airport. To everyone, thanks in advance.
I’m really desperate. I’m a big Apple fan. I have two Apple MacBook Pro laptops with Mountain Lion software. I also have an Apple Airport Extreme. My HP Photosmart C4780 printer was also purchased from Apple. Anyway, my Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
This appears to be an HP printer problem. I went to HP community support with the information below but I have received no solutions outside of buying a new printer.
“Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0.”
To be straightforward, I’m no computer tech so I don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve tried everything to reconfigure without success. If I need to make these changes via Airport Extreme Utility 6.0 not easy to find not that I know what I’m doing.
Most importantly if I ever get wireless working again, do I still need Airport Extreme connection or is the AT&T U-Verse modem/router sufficient?
Any direction or help is greatly appreciated. Thank you for listening.Thank you for your prompt response. I'll be honest I'm a retiree and a newbie to all of this stuff. I don't even know how to do a thread. (Embarassing) This is my first ever contact with the Apple Community so I'm slowly trying to figure this out as well.
As to your thread request, I'm assuming you want to read my post with HP. Not knowing how to thread, I've copied it below.
I have an Apple MacBook Pro laptop with Mountain Lion software. I also have an Apple Airport Extreme. My Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0
To be honest, don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve read your forum and tried everything to reconfigure without success. Any direction or help is greatly appreciated.
Thanks in advance!
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
I finally figured it out! (Sorry that I'm replying to my own posts btw, but I want to post the solution for anybody else with the SigmaplusEOL1 problem). If you have the SigmaplusEOL1 as your SSID when you print the "Wireless Network Test Report", you do NOT need to return it (I know that's hassle for people). To fix the problem, follow these steps.
1) Unplug your printer.
2) Go to your router's IP address (like 192.168.1.1 or whatever it is for your router).
3) Change the SSID of your wirelss network to "SigmaplusEOL1".
4) For the Security option for your wireless network select none (so that a password is not required to access your wireless network).
5) Power your printer back on and reprint "Wireless Network Test Repor". It should say "No problem found..."
6) The report should also have a the IP Address of the printer (under Configuration Summary at the bottom). Type that IP Address in your browser to get to the printer's settings page.
7) Click the "Network" Tab at the top.
8) Under the "Connections" header in the left pane, click "Wireless (802.11).
9) Click "Start Wizard" at the bottom right.
10) In the wizard, change the SSID and encryption (wep or wpsk) password to whatever you want your wireless network to be. So probably whatever it started out as before you changed the SSID to SigmaplusEOL1
11) Click "Finish" at the end. The page will probably try to keep loading but it won't because you changed the network settings of the printer. Just ignore that
12) Go back to your router's IP address and change the SSID and encryption password to whatever you changed the printer's SSID and password to.
13). Reprint the Wireless Network Test Report. It should say the SSID is the same as your wireless, and everything is good.
That's it. You should be good to go now.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Thank you for your prompt response. This has been a totally frustrating experience. I’ve spent at least 8 hours trying to fix this. My HP problems and your initial steps were identical to mine. I am by no means a tech person and my computer tech knowledge is minimal. However I followed your steps to the best of my ability.
I did get the SigmaplusEOL1 message. I was able to get to Step 6 where the wireless network test report now reads – “HP printer settings do not match your wireless router settings.” So I guess this is a step in the right direction. However unfortunately the Configuration summary message for the IP Address reads – “Not Applicable”. (Note: changing SigmaplusEOL1 to network name knocked out my Internet access. Had to switch back to regular network name to regain access.)
I’m at a loss as to what to do next. Without the IP Address is it possible to move forward? As I stated earlier, I’m not a tech person. As to your steps 7, 8 and 9, I can’t find them on my computer or maybe I’m looking in the wrong places. In System Preferences - Network, I have none of these steps. If you’re referring to Airport Utility, with the changes in Mountain Lion, these steps are no longer there. If you’re talking about Safari, Firefox or HP, now I’m really lost.
Finally, I don’t know if you can answer this or not. If I ever get wireless working, do I still need Airport Extreme or is the AT&T U-Verse modem/router sufficient?
Again thank you for your time and patience.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Unfortunately I am unable to offer any further advice as I only followed the instructions listed on the other page.
Finally, as to having WEP enabled, I don't know. Don't even know where to look. The best that I could determine is that my security is WPA/WPA2 Personal.
I'm truly sorry about all of this. Thank you for your time and patience. After reading all of this and you change your mind, I would understand. -
hi, i bought a irig to connect my guitar on my macbook pro 2012, but when i use the irig in my mac, it doesnt recognize, so i cant choose it on preferences of sound, what can i do? (the sound of my guitar goes by IRIG but I can not hear due to feedback and when I try to record another track on the garageband, the sounds recorded on the new track is catching the sound of another track recorded)
Turn the internal mic level off. Use headphones as monitors.
-
MacBook Pro(Mid 2012) Can't connect to my Dynex TV with mini display port to VGA adapter
I have a MacBook Pro(Mid 2012, running OS X 10.9.4) and I recently just bought a mini display port to VGA adapter so I could hook it up to my dynex TV but when I connect everything my TV says no signal. Do I need to do something in settings?
Hi psikalis,
If you are having issues connecting an external display to your MacBook Pro, you may find the information and troubleshooting steps in the following articles helpful:
OS X Mavericks: Connect multiple displays to your Mac
http://support.apple.com/kb/PH13814
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Regards,
- Brenden -
When I connect my Macbook Air to my TV via the thunderbolt outlet and using a Mini Display Port/HDMl adaptor, the only image that appears on the TV screen is that of my Air background. There is obviously a signal getting through to the TV, but it is not sending images of anything else, and am unable to watch video through my Air. Any advise/suggestions?
This is called "extended desktop mode". It's an extension of the desktop off to the right (by default) of your MBair screen. Grab an app and drag it off the right side of your MBair screen and it will appear on the TV.
To mirror your MBair screen on the TV you can press Command F1. This will toogle between mirror and extended desktop.
You can find all the settings in System Preferences > Displays > Arrangement tab.
Regards,
Captfred -
im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!
I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI. I have the most success with the following operations in this order:
1) Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
2) Plug the mini displayport end of your new super-cable to the computer.
3) Plug the HDMI end into your TV.
4) Switch inputs on your TV to the proper input.
5) If still nothing on the TV, try a different HDMI port on your TV.
Hopefully this helps! Good luck. -
I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.
Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy -
I am trying to connect my mac book pro to the tv via a mini displayport to a hdmi cable, the only picture on the tv screen is the background picture of my mbp, does anyone know what I need to connect to my samsung tv ?
Hi there. I also bought an iWires mini Display port to HDMI cable and have an LG LED/LCD TV. I plugged it in to my MB Pro and followed the very small writing that came in the package and got both audio and video going. You need to change the audio settings from within System Preferences on your Mac to select your TV as the audio output.
My concern is the data latency - do you experience a delay between moving your mouse on the MBPro and the TV displaying the movement? It is only a fraction of a second, but certainly enough to be annoying, especially in a cable as expensive as the iWire. -
I have a macbook and want to watch netflix on my tv, but i don't have an hdmi connection on the tv, just RCA. I bought the mini-display port to VGA. What do i need to connect it to RCA input on my TV?
There is a VGA adapter to TV S-Video RCA Out Cable for PC Video.http://www.amazon.com/VGA-Adapter-S-Video-Cable-Video/dp/B000Y7T5UU/ref=sr_1_7?s =electronics&ie=UTF8&qid=1316369974&sr=1-7
-
When I connect my MacBook Pro to a TV (Thunderbolt to HDMI) no display is recognized and I am unable to mirror. I have a 2.9 GHz Intel Core i7 with 8GB 1600 MHz DDR3 running OSX v 10.8.3.
You are being scammed. Please ignore and close. Do not click any links or call any phone numbers!
Remove Browser Pop-up Problems
AdwareMedic
Adblock Plus 1.8.9
remove adware that displays pop-up ads and graphics on your Mac
Maybe you are looking for
-
1st Generation iPod problem - folder icon/exclamation!
Any help would be appreciated. I have a 1st generation iPod and it has worked fine since 2002. The battery seems fine and have had no problems with it until yesterday. When I connected my iPod via firewire to my Mac, iTunes wouldn't recognize it. The
-
I have a Mac book pro that is giving me the note that it is full.... Trying to back it up...... It's freezing
-
Using Document Management within SAP
Hi, I'm relatively new to SAP and need to have some information about using the Document Management Services within SAP. As with other ERP products there are drawbacks to allowing this functionality such as disk space concerns, upgrades, performance
-
My company is used to exporting data from MAX using a custom header with the tab delimeter. I am trying to make a LabVIEW program that automatically writes the data and header to the file. My company already has software to make a custom header tex
-
Hi ALl, This is weird, but yesterday I saved quite a few formulas with the @SHIFT and @PREVSIBLING in them. But to day I opened up the same Block storage cube, and started putting in some more formulas, and it throws errors. For instance if I use, @P