Can I connect my ipad2 with my aiport express without a pc?

Can I connect my ipad2 with my aiport express without a pc?

Yes. However, you would need a PC or Mac to administer the AirPort base station.

Similar Messages

  • Olympus xz-1 camera when connected to ipad2 with supplied ubs cable into apple usb to 30pin adapter it prompts the ipad to display a message like " this device draws too much power to charge" and then i can go no further!

    olympus xz-1 camera when connected to ipad2 with supplied usb cable into apple usb to 30pin adapter it prompts the ipad to display a message like " this device draws too much power to charge" and then i can go no further! if i take the  card from the camera and put it into the card to 30pin adapter and plug that into the ipad no problems. if i connect the camera with supplied usb cable to desktop imac , no problems. if i connect my olympus slr to the ipad using its usb cable into the apple usb to 30pin , no problem .  very frustrating , i don't want to always have to take the card out of the camera to down load photos to the ipad2,IDEAS?

    I'd ask that on the iPad forum.
    https://discussions.apple.com/community/ipad

  • How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?

    How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?
    Any help appreciated. Obviously I'm not technically minded so simple... Sorry... Very simple instructions would be great. Thanks

    Does the iPad come up with a "no AirPrint printers found" message? If so, the most common fault is that the printer isn't on the same WiFi network as the iPad. Your printer may also need a firmware update. Epson has some support information here that may be of help:
    http://support.epson.net/airprint/fw.html
    Regards.

  • I can't use my iPad2 with CANON EOS 350D

    I can't use my iPad2 with CANON EOS 350D

    Hi! You seem to be good at this. today I purchased the Camera Connection Kit but it doesn't work with my old Canon EOS 350d. I've switched to 'PTP' but it doesn't work. When I go in to "pictures" and "Camera" I can't see any pictures. Do you have any idea why? Can it have somehing to do with that I don't have the newest IOS 5? ( I have iPad 2nd gen). Don't know if you need to know anything more, but I would really appreciate if you could try to help me!

  • How do I connect my ipad2 with my hp photosmart c4780 printer?

    How do I connect my ipad2 with my HP photo smart C4780 printer?

    Sharon-
    I don't think that printer is capable of AirPrint.  If the printer has WiFi or can be connected to WiFi, you can use an iPad App like Print n Share.  If not, you can use a computer program like Printopia to share the printer as AirPrint over WiFi.
    Take a look at the free iPad App, HP iPrint Photo.  It has some limitations but should at least get you printing.
    Fred

  • HT1695 I can't connect my Ipad2 to my home wifi it says "unable to join rge network"

    I can't connect my Ipad2 to my home wifi it says "unable to join rge network" eventhought my Iphone and MacBook are connected!!!

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • How can I connect my ipad2 to a projector to show videos on a screen?

    How can I connect my ipad2 to a projector to show videos on a screen?

    http://store.apple.com/us/product/MC552ZM/B

  • Can I connect two macs with thunder bolt ?

    can i connect two macs with thunderbolt like I do with firewire and IP? I don't want to transfer files by using the control "T" at startup . I want use VNC to control one mac from the other and use thunderbolt vs ethernet.
    thanks for any help

    You can connect the two.  Whether you can use VNC, I have no idea.
    http://store.apple.com/us/product/MC913ZM/A
    Ciao.

  • Satellite L20-101: can't connect my TV with the svhs

    Hi dudes,
    i have a problem.
    I have a L20 - 101 and i can't connect my tv with the svhs exit of my toshiba.
    I reinstalled drivers for motherboard and videographics, what can i try?
    thanks

    Ok, sounds like a really un-nice problem.
    So, how do you try to switch to the TV? You have the option in your display properties, but does the machine *recognize* the TV? You have also the key combination FN+F5 to change the display, did you already tried it?
    And regarding your display drivers (which vga do you have? nvidia or ati?)
    You can take a look here to find the latest working drivers for mobile platforms:
    http://www.laptopvideo2go.com/
    http://www.omegadrivers.net/
    Good luck buddy

  • Can i connect my HDTV with ipad

    Can i connect my HDTV with ipad?

    gyrhead is right - a short video embed to further explain ( hopefully it works )
    Regards.
    Embed did not work as I thought -
    heres a link : http://youtu.be/UnyyCMPyTq8

  • How can i connect the mac with internet key?

    how can i connect the mac with internet key?
    I try but it tolds me that I haven't the javaruntime...

    I try, but to run javapreferences computer told me that I must have a Java runtime... thankyou

  • I have mobile internet at the moment via a USB stick in my laptop. Can I connect my Timecapsule with a cable to this laptop and make it into a wifi station??

    I have mobile internet at the moment via a USB stick in my laptop. Can I connect my Timecapsule with a cable to this laptop and make it into a wifi station so that I can use my iPad?
    THanks for your help!

    for #1
    Frequently asked questions about Apple ID - Apple Support
    I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
    Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
    If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
    for #2
    Apple does not accept unsolicited ideas see Apple - Legal - Unsolicited Idea Submission Policy

  • How can i connect iphone 4 with other mobile through bluetooth

    how can i connect iphone 4 with other mobile through bluetooth

    You can't. iPhone does not have this feature.
    Some iOS apps will allow you to connect to other iOS devices for peer-to-peer games, or sending photos, but not to other makes of phone.

  • Can't connect to websites with any browser. Bookmarks do not work but bookmarks  through bookmarks edit works just fine.

    Can't connect to websites with any browser. Bookmarks do not work but bookmarks  through bookmarks edit works just fine.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Can I connect a monitor with built in speakers to my macbook air?

    Can I connect a monitor with built-in speakers to my macbook air?  What would you suggest in the 22" - 24" size for everyday use?

    If you say that there is built in speakers. Most probably the connection is HDMi. You will need an adapter to connect the MacBook Air to the monitor through HDMI, at the same time, the adapter needs to support video and AUDIO.

Maybe you are looking for

  • Dynamic structure creation failure for only some structures.

    I have some code to dynamically create a structure and table based on some sap how to... documentation. It works perfectly for a number of structures but fails on the structure I wish to create. 'l_c_cube_write' in the code is the variable that defin

  • Automatic Request Processing in ODS?

    Hi Guys, Can any one tell me what is the functionallity of Automatic Request Processing in ODS manage screen & in which scenario is used? Thanks in Advance Urs, RK

  • Defining Dynamic structure in Remote Function module(RFC)

    Team, I got a requirement, where I need to create a dynamic structure and dynamic table in the exporting tab of Function module(RFC). Say, I have sales request(4 fields) and sales quotation(5 fields). Depending on the importing parameter, If it sales

  • Hi office control

    hi all, i cannot do using office control.. please call me how about office control(ms_word and ms_excel)??? how is prepared for office control??? Reply me soon...... thanks, s.suresh

  • Connection between 2 routers across a Switch

    I have a link on for example VLAN 211 and I need devices on VLAN 1 to get access through. How can I do this. The Link line is on VLAN 211 but the switches can only be on VLAN 1 as they are just actng as hubs and VALN 211 cannot be created on them. Th