Can i connect the printer to a wireless network and a usb computer conneconnection at the same time

Can I connect my Officejet Pro 8600 by Usb and wireless at the same time, I have a very slow Network at this time.

Hello gilldenc
To answer you question yes. You can have one computer attached via USB and to a wireless router at the same time. What router are you using? Is it your internet connection that is slow? Usually your internal home network is much faster than your internet speed.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Similar Messages

What would cause an IMAC to recognize one printer on a wireless network and not recognize another printer?

What would cause an IMAC to recognize one printer on a wireless network and not another printer? I have a smaller HP and a an HP 4600. The computer recognizes the smaller printer but not the bigger printer even though the printer in Settings and shows up on Settings, but I cannot print to it.

Do you have a printer driver installed for it? When you open the Print dialog have you selected it from the Printer dropdown menu at the top of the dialog?
Do you know that the printer is working and is properly installed (Added?)

Can't connect Airport Express to existing wireless network!

I just got my new A Express. i try to wirelessly join an my existing network but when it restarts it doesn't see the device. It's i'm trying to set it up so that I can use it as a wireless printer connection for my two macbooks, but all i end up with is the flashing amber light. I've tried a hard reset and that's clearly not solving the problem.
i'd welcome some help as well.

for some reason i had a problem with my airport in my laptop and it couldnt find networks that are hidden.. so that might be the problem the encryption.

Can't Connect OfficeJet 7410 to new wireless network - used to work on old one

Hi, I'm on a Mac OS. I just upgraded my wireless network to use an airport extreme. I have a verizon fios router - same as I had when it used to connect. The only change was adding the airport extreme. Now, the officejet 7410 all-in-one will not connect to the wireless connect. It SEES the name of the network, and asks me for a WEP Key, which it didn't used to do. It used to ask me for the network password. I found the WEP key on the router and it acts like it is trying to connect but takes a long time and then gives me an error. One time it never gave me an error and seemed like it had worked, but was not connected. It just gave up.
My configuration page indicates offline with no active connection and wireless status disconnected.
I restarted everything with no change. I don't know why it would be asking me for a WEP key this time and then not accept it but that was the first indication that something was different when it didn't ask me for the network password.
Also, as a separate issue but related. In trying to fix this, I deleted my drivers to reinstall and see if I started over that it would work. That created another problem in that now it seems that HP no longer supports a driver for this printer. Is that even possible? It's not that old. It says it does not exist on the software update. Please help!

Hi YSJA,
I'm sorry to hear you've had problems accessing your Officejet 7410 since adding the AirPort Extreme to your home network.
I have included a link to HP's Wireless Printing Center troubleshooting section. It has section, "Was anything changed or updated on your router recently?" that has detailed steps to help you resolve the issue.
Wireless Printing Center Troubleshooting
http://www.hp.com/global/us/en/wireless/troubleshooting.html
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

I have a canon scanner MP560 wireless. Needed to create new wireless network and now my computer can't find the scanner/fax..

My iMac doesnt' see my Canon MP560 wi fi scanner ever since I created a wireless network in my house. Can't find a way to change whatever settings i need to to connect the scanner. help.

Well let's see if we can help you get set up. Have you got any 2.4 GHz cordless phones in the house and if so try unplugging them and do a hard reset of the express.
1. unplug the express
2. press the reset button
3. while pressing the reset button plug in the base station
4. keep holding the rest button till you see 4 green lights flash
you may have to hold it for 30 seconds or so
if this doesn't work try plugging the express in right beside the computer and then going through the airport setup assistant
Good luck
Let me know
iMac G5 iSight 17" Mac OS X (10.4.4)

Can I connect a Macbook to a wireless network for PCs?

I would like to purchase a Macbook but I would like to figure out the extra costs before buying. I currently have a Dell Inspiron 600m notebook that connects to the linksys network in our house, can I connect a Macbook to the same network or is there another package I need to buy?

The other users may know more about this than I and dispute with me, but I can tell you from personal experience that sometimes there are problems. At this very moment, for example, I am at a buddy's house who has a wireless router hooked to his pc and my apple FIRST displayed one internet page and then flaked out on me. SECOND showed an airport signal but could not connect to any sites. THIRD showed no airport signal at all.
The solution is to plug directly to the router with an ethernet cable and it always works.
The other solution is to unplug the router for 30 seconds to reset it everytime you switch between a pc and a mac. The cable company gave me this handy solution which they claim is a constant necessity. BUT I have found it is in fact rarely needed at home where both pc and macs are running. But still sometimes I have to do it.
So if there is some pattern to all of this I cannot find it. But there is no "extra" hardware required, just some occasional software failures.

IOS 5 can't connect to WPA/WPA2 Enterprise Wireless Network

After upgrading multiple iPhone 4 (CDMA versions) to IOS 5.0, I have not been able to get them to connect to our WPA/WPA2 Enterprise wirless network. We use a Cisco Wireless LAN Controller. The wireless network is capable of doing WPA or WPA2 Enterprise with PEAP. These phones all connected to this network fine before the upgrade.
When connecteding to the network, it prompts me for the username and password and when I tap join it sits for about 10-15 seconds then says "Unable to join the network" with a Dismiss button.
It connects to non-Enterprise networks just fine. I have tested it on WPA Personal and WPA2 Personal networks and it has worked on several without issue.
I have tried "forget this network" with no success.
Is anyone else having this problem? I know of at least three Verizon iPhone 4's that have this exact same problem. I haven't seen one working with this configuration yet.

I have the same problem:
Cisco WLC's -> WPA2 Enterprise AES + EAP-PEAP 802.1x with CCKM
Pre 5.0 - all worked fine
Post 5.0 - it tries to connect and after few moments i get error - couldn't connect.
Info from controller:
10/17/2011 12:16:37 CEST           INFO           172.16.16.X           Sending EAP request to client from radius server. 6.f. ..l
10/17/2011 12:16:38 CEST           ERROR           172.16.16.X           Retransmitting EAP-ID request to client,retransmission timer expired. 5.y. ..l
10/17/2011 12:16:39 CEST           ERROR           172.16.16.X           Retransmitting EAP-ID request to client,retransmission timer expired. 5.y. ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           Authentication failed for client as EAP ID request from AP reached maxmium retransmissions. 5.yp ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           De-authentication sent to client. 5.oP ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           5.yp ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           EAPOL-key is invalid, scheduling client for deletion. 5.yp ..l
On the Radius server i don't see any activity regarding this device.
I had this network configured on my iPhone - after upgrade and restore it remembered it. Every time i was in vicinity of my Enterprise WLAN it tried to connect - resulting int express battery drain - 6-7 hrs and battery was empty from 100%

Can't connect to my company's wireless network after 10.6

I was connected when I upgraded, but as soon as it restarted I can't re-connect, or I do get connected and it says "No IP Address".
The network is a WPA network. I've removed it from the list of saved networks, deleted the com.apple.airport pref file and rebooted but it is not picking up the settings for the network correctly. When I change them to what I think are correct it still doesn't work.
Also, while in the Network pref pane It added the network as a 802.1x network, but when I click connect it just hangs.
A couple times it has connected but about 10 sec later an "!" appears over the indicator and then it keeps disconnecting/reconnecting.
Any ideas?

Yup, I am having the same problem, I just assume go back to regular Leapord but that means a clean install and I don't really care to do that. The solutions seem rediculous, just wait and meaybe it will work after an hour? Really? Or restart my router, tried that and nothing. Changed the security to nothing and I still couldn't connect. This is redicuolous, Thanks Apple for your attempts to be like Microsoft and put out a crap product. To me, this is unacceptable. Beta testing should have identified the problem and they should have fixed it before release. Now, apparently, there are a bunch of users who have airport issues. If anyone has a real solution, please provide it, otherwise, Apple needs to get their, you-know-what together and fix the problem asap.

Connecting HP Laserjet P1102W to wireless network (then getting drivers!)

Hi,
My macbook pro and HP LASERJET P1102W seemed to be communicating just fine when I had snow leapard. Post update to Mountain Lion, problems.
I have gotten the printer to work when connected via USB, however not consistently. (Often it cannot recognize when paper tray is filled, cannot do two sided printing and has other issues perhaps connected to the fact that software is missing?)
I have read the documentation on HP site, noting that the only way to install drivers is via a network connecton and airprint which requires a network connection.
Not sure this is the right place to ask this, but I will for now:
How do I connect my printer to my network, which is a new home network as I just changed from DSL to Cable?
Note: I had not previously ever connected my printer to my wireless network and set it up to work with Airprint, though that is one of the reasons I bought it.
Once I do connect the printer to my wireless network, perhaps then I can try to follow the steps on the HP site   http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03425022&cc=us&dlc=en&lc=en &os=4142&product=4110396&sw_lang=
If anyone has experience with the above, I would love to hear it!
Final question: Is plugging the printer into the back of the new cable modem via ethernet or USB perhaps a way to put it on the wireless network? Not a convenient location, but if only alternative, I would try it.
THANKS!
Ani

Dear Happy-to-Help,
I appreciate you logging in to help. I shall give this a shot in the next couple of days when I have more time and let you know how it goes.
I have been quite frustrated by the fact that HP says if the HP Laserjet P1102W has worked fine with Snow Leapord and one upgrades to Mountain Lion, all the drivers will be automatically upgraded/updated (or whatever the term). That has not been the case at all.   It took quite a bit to even get my computer and printer to talk to one another via a USB connection—with none of the functions of the printer (as noted above) working properly to this day.
I hope your suggestion works. Will be back in touch to let you know.
Ani

I can't connect or print wireless

I have the hp photosmart c4780 and I used the USB wire to connect it to my computer after installing the software off the internet as I lost the software it originally came with. So with that being said, on my little Eee asus netbook windows 7 I can print with the printer when it's connected via USB only! Also I use my printer mainly for printing coupons or documents, and if anyone's familiar with <a href="http://www.coupons.com" target="_blank">www.coupons.com</a> then you'll know they have an app for most all tablets and smart phones and so I downloaded it on both my ipad 2nd generation and my iPad mini, and I was able to print coupons wirelessly via the coupons app only, not via the <a href="http://www.coupons.com" target="_blank">www.coupons.com</a> through my safari browser. So I'm just not sure why I can't get it to connect wirelessly, when I went through the installation and set up process I went through the option of switching to wireless rather than USB and I thought it went smoothly but any other way I try to print from my computers or iPads it will say that the printer isn't discovered. I've also made an account with th hp connect, I've got the eprint hp app on both iPads and I'm having no luck! Also, my printer is just now I'm noticing also, offline i dont know how that happened, but when I printed the wireless network test report along the top it's saying that " MAC ADDRESS FILTERING MAY BE ENABLED ON YOUR WIRELESS ROUTER, THIS CANT PREVENT YOUR PRINTER FRIM CONNECTING TO YOUR WIRELESS NETOWRK DURING SETUP. IF YOU DO HAVE MAC ADDRESS FILTERING ENABLED AND WOULD LIKE TO KEEP IT ENABLED YOU MUST ADD THE MAC ADDRESS OF YOUR PRINTER TO THE LIST OF PERMITTED DECICES FOR YOUR WIRELESS ROUTER BEFORE CONTINUING. THE MAC ADDRESS FOR YOUR PRINTER CAN BE FOUND ON THIS TEST REPORT.***"<br>And I can see below on the print out where my MAC address is, however this isn't helpful because I don't know what MAC address filtering means nor if it's bad or good, or how I can change it accordingly. And in the diagnostics summary below it says NO FILTERING: FAIL<br>I'm unsure as to what that means?<br>So if anyone can help me I'd so greatly appreciate it,<br>I also tried to find that claim code that I was supposed to be able to find when i do the print out on my printer and I can't see it on the test report or the configuration page.<br>So, so far I've just reset the printer itself to default settings. And from here...well...as you can see..<br>I NEED HELP!?!?<br>Please and thank you!

Hi HBS4026,
Welcome to the HP Support Forums. I think that the root issue you are experiencing is the printer is not connected to your wireless network, and as a result you are running into several issues.
wikiHow’s How to Find the MAC Address of Your Computer has a nice and non-techie description of what a MAC address is and how to find it. By turning on the MAC filtering for your router, is a way of telling your router that only the devices with an approved MAC address will be allowed to connect to your network.
Most customers with home wireless networks don’t use this feature, as it can take more time to maintain than a person would like to give. It requires that you add/maintain the MAC address of any device that will be connecting your to network, including, but not limited to, iPads, tablets, Smartphones, iPhones, computers, laptops, etc.
Please start by turning the router off. If your router doesn’t have an on/off switch, please disconnect the power cord. After waiting a full 60 seconds please turn the power back on (or plug the power cord back in). Hopefully the network test report will give us a pass on No Filtering.
If MAC filtering is turned on (I suspect it is on) and you don’t want to use this feature, please contact the manufacturer of your router on how to turn this off. I do think this is the root of your connectivity issues.
Once you have confirmed that MAC filtering is off we should be able to get everything working wirelessly by following the information below.
Let’s start with your Windows 7 laptop. I’ve included the How Do I Find the Best Windows 7 or Windows 8 Driver for My Printer? document. It will walk you through downloading HP’s Printer Install Wizard. This will also help you connect the printer to your wireless network while ensuring you have the right driver for your printer.
Once you’re printing from your laptop wirelessly, please try test printing something from the notes app on your iPad. If your router supports Bonjour, the communication method for Apple’s AirPrint feature, you should have no problems printing. If you are unsure, I have included a post by Shirlzz1 that will walk you through downloading an app to check.
As for printing from coupons.com using the Safari browser on your iPad it comes down that the iPad is considered a mobile device requiring the app as an interface.
I think I’ve addressed everything that is plaguing you. If I haven’t please let me know. In addition, if anything goes askew while doing the above, please let me know at which step things went wonky and the contents of any error messages and where they were displayed.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Time Capsule - Can it run as DHCP router, create a wireless network and plug into switch for wired network all at the same time?

I have a closet with Wired connections from all over the house terminating in it. I also have the internet modem and a switch in this closet. My old setup was a netgear in the closet creating a wireless network and also feeding the Ethernet ports all over the house. In my room, I had an Airport express (a month old) bridging the wifi to make the wifi network larger. The Express was hard wired from the wall and my mac mini was using it's wifi (printer was plugged into other ethernet port). Everything was working great.
Fast forward to last week. My Netgear died. So, I bought a time capsule. My plan was to move the Express to the closet and have it create the wifi network and also then run cat 5 cord from express to the switch to feed all the wired wall plugs. Reset it and set it up to create the wifi network as well as DCHP NAT. Wireless was running great on it. Then I plugged in the Cat 5 in the second Ethernet Port to the switch. Wifi stopped working and none of the computers would connect using wired connections either. They would see a 'network' but nothing would work. I would unplug the Cat 5 feeding the swtich and the wireless would start working again. Plug the Cat 5 back in and wireless would stop.
So I thought I would try the Time Capsule in the closet and see if I could get it to work. Pretty much the same thing, except at this point I figured out if I went in and told it NOT to create a wifi network the wired portion worked fine and all the wired computers in the house worked fine. Of course, then I didn't have Wifi.
I'm not clueless when it comes to networking, but I can NOT figure this out! Can either the Time Capsule or Express Create the wifi network AND also feed the data to the switch for all the wired computers?
To simplify this is what I want my end result to be. I prefer the Time Capsule to be the wireless connection extender, but if I have to have the Express do it, I'm fine with that.
1. Express in the closet creating the wifi network as well as feeding the data to the wired connections via my switch.
2. have the Time capsule in my room at the opposite end of the house plugged into the hard wired connection to extend the wrieless network as well as have wired connections such as my printer and my Mac Mini.
If I can get #1 to work, I don't think I'll have any problems with #2. Help!

I have an equally complex setup with a managed switch actually but I have never seen the TC have this kind of issue.
What I do notice is you have changed the TC from defaults.. you are using a non-default IP range.
I have run across issues like this where people move things from default.
I would like you to start over.. factory reset the TC. That will set it back to default router mode.
Do the min setup on the TC..
1. Change all names from what you were using. That includes the TC name and wireless name/s
Make them short, no spaces and pure alphanumeric because that is the correct way to network. Apple default names with spaces and apostrophes are fundamentally bad.
2. With just the TC plugged into the switch.. and a single computer connected by ethernet. Power cycle the whole network.. this allows the switch to clear all the old MAC address.
3. Test on the computer just ethernet. Turn the wireless off.
The computer must use dhcp and must get an ip from the TC.
It has to get the correct Router.. ie Gateway.. I wish apple could stick with proper network terminology.
And it must get same address or valid DNS server address/es.
If it fails.. please plug ethernet directly to the TC.. bypassing the switch.
You should get the standard IP addressing and internet connection.
If not please post the screenshot from the Mac of the network preferences showing the ethernet setup.
I need to see what address it does get. I need you to make sure the ethernet is the TOP of the list. So rearrange the order of network connection. With the airport off it should just go to the top of the list.
If it appears to be working .. but a browser cannot connect, open a terminal and ping an internet address.
Ping the actual gateway address the ISP gives you and ping the ISP dns address.

Can't Connect AirPort Express to existing WPA network

I just bought an AirPort Express and I can't connect it to my existing Wireless network where I use WPA based security.
I've both tried to use the Configuration guide and done it manually with the Admin tool but it just will not connect to my Wireless network.
Less of changing form WPA-PSk to WEP128 I think I have tried "everything".
Any ideas?

Can you changed your router to use WPA:TKIP as opposed to WPA:AES?
When I changed my router to WPA:TKIP, my airport express connected, but with AES it doesn't!
This is not good, since according to Wikipedia, AES is superior and considered part of WPA2, which Apple claim they support (and yes I am using firmware V6.3)!
Hope this helps!

How do i change the name of my wireless network

how do i change the name of my wireless network?

Open Airport Utility, click on the Wireless tab.

Can I connect a wireless printer to two wireless networks

I searched and couldn't find an answer to this exact situation. The answers to similar questions didn't seem to work.
Can we share a wireless printer over two wireless networks without adding hardware or changing the wiring or doing complicated software modifications?
Here is my set-up:
Cable Modem> Linksys Wireless Router “N” on the first floor > older AirPort Extreme “G” via ethernet cable on second floor > Laser Printer via USB Cable on the second floor, plus an AirPort Express to extend the area on the second floor. We have 2 MacBooks and 1 MacBookPro that connect to the internet via either of 2 wireless networks. Generally, for better connection, you choose “N” if you are on the first floor and “G” for the second floor.
Currently, if you want to print to the USB Printer, you just select it in the print dialog box. It does not matter if you are on Network “N” or Network “G.”
We just added a new wireless Printer that’s on the first floor. (No, I didn't read the directions, the printer screen said if there is a W?? button on your router, press it. I did and it automatically connected to the “N” network. It also has its own email address for printing without a computer, but that still doesn't solve this question.)
If you want to print to this printer, you must first change the computer’s AirPort setting to join the “N” network. If you don't, you still get the print dialog box, but eventually you will notice that nothing happens. The document just sits in the Printer’s queue.
Is there a way to get a computer on the “G” network to find the wireless printer on the “N” network without first changing networks?
Remember, it automatically finds the USB printer that is plugged into the “G” network router.

It used to be that if you wanted to wirelessly extend the range of a network, you'd have to set up a WDS. (WDS = Wireless Distribution System.) There was no "Extend a wireless network" option and no "Allow this network to be extended" checkbox—you'd have to fill out lots of WDS information yourself. It was sort of a pain.
Then, with the 802.11n AirPorts, Apple introduced the "Extend a wireless network" option, greatly simplifying the setup process. It accomplishes the same thing as a WDS, but it's easier to set up and has less overhead. However, it can only be used if every AirPort in the wireless network supports 802.11n.
Your Express may support 802.11n, but your Extreme is older and does not. So "Extend a wireless network" won't work for your network. That's why you got errors when you set the Express's "Wireless Mode" option to "Extend a wireless network." Instead, you'll have to do things the old-fashioned way* and configure the Extreme and the Express to be part of a WDS. Your network will still work as desired: the Express will rebroadcast the signal from the Extreme, and clients will connect to whichever station has the stronger signal. It's just that you'll be using the older WDS technology instead of the newer "Extend a wireless network" feature.
"Join a wireless network" is something different entirely. You'd use it if you wanted to connect to a network but not rebroadcast it. This could be useful when, for instance, your main router isn't an AirPort but you want to use AirTunes. In your case, however, this option wouldn't be very useful.
Look at [this thread|http://discussions.apple.com/thread.jspa?threadID=2588489] for more information.
*Actually, the old-fashioned way would be to use modems. Or to forget about the internet and send snail mail instead.

Can't connect my P1102w printer to my wireless network (using Mac OS 10.6)

I have a vanilla home wireless network (D-Link to a cable modem), and a MacMini running OS 10.6.8. My Mac laptop and 4th. Gen iPad work seamlessly. But my hours-long attempt to connect my new HP P1102w to the network has been totally frustrating, despite close study of the pdf documentation, the printer's self-test/Device configuration sheet, browsing this forum, watching a slew of YouTube/HP videos, and following all manner of directions.
The only consolation is the printer works fine on its USB connection.
Here are some issues I've encountered that have stopped me in my tracks:
Carefully following both the pdf instructions and HP's online how-to video, I get through Step 6 w/ no problemn. but then I go to Step 7, which says:
" Under Communication Mode , click Infrastructure , select your network SSID from the Available Network Names (SSID) list, and then click the << button."
Problem is there's nothing of the kind in that window. All I see is a status of the Wireless: enable or disabled (depending on a choice). And even if I try selecting Enabled, it switches right back to Disabled. Aside: I note the printed instructions show a copyright date of 2011. That's ancient history in the CPU world.
Other issues: The only IP address I can find for the printer is the IPv4 address, but that's only for Direct Print Configuration. Is that the IP address I'm looking for?
The printer's hardward address, I assume, is its MAC ? Boy, I could sure use clearer use of language here.
So, needless to add, I'm stuck. It seems it should be THAT hard, but so far nothing I've been able to find on HP support or the forums seems to help. Thanks for any advice you can provide.
PS. I'd hate to have to return this printer because I'm a two decade HP printer lover, but, alas, I may have to if I can't find a solution.
Northwest John
This question was solved.
View Solution.

Hi @Northwest-John,
I see by your post that you are unable to setup the printer on the wireless network. I can help you.
Update the printer's firmware by the USB connection just to make sure that isn't causing any issues with the printer's Embedded Web Server (EWS) not allowing the proper changes. HP LaserJet P1102w Firmware Update Utility.
The newest version is 20130703, which you can compare by printing the configuration page.
Power cycle the router and restart the Mac.
The printer won't recognize the network name if there usually is any symbols or spaces in the network name.
Make sure Safari is set as the default browser. Sometimes the Embedded Web Server (EWS) won't open in other browsers. Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
Print out a configuration report and make sure the SSID and IP address are cleared.
(hold down the x button and when the printer makes a noise let go)
Connect the USB cable from the printer to the Mac.
Go to the Apple, system preferences, print and fax.
Double click on the P1102w.
Open the utility.
Click printer setup.
Click HTML config.
This should open the Embedded Web Server for the printer.
Click the Networking tab.
Click Wireless from the list on the left.
(Click Enable if you have this option)
Under Communication Mode , click Infrastructure.
Select your network SSID from the Available Network Names (SSID) list and then click the << button so the network name moves over to other box.
From the Security Mode pop-up menu under Authentication , click WEP, WPA/WPA2 or open . Your selection depends on which Wireless Security Protocol your network uses.
Make sure you select either hexadecimal or alpha depending on your password. (very important)
Apply the settings.
In the confirmation box, (changes have been saved) click OK.
You should get a solid blue light on the printer shortly.
Then all we have to do is delete the USB driver and add the network driver.
Click on the Apple.
Click system preferences.
Click the print and fax icon.
Highlight the printer and click on the - sign to delete the printer. (USB driver)
Disconnect the USB cable.
Then click the + sign and select the printer from the list and click add. (P1102w bonjour)
Test the printer.
If you have any issues with the HTML config opening then do the following steps:
Close any applications.
On the Apple menu bar, click Go, computer, MAC harddrive, Library, Printers, HP, LaserJet, click on folder for your printer, click on EWS browser or HTML config, click the Networking tab, click wireless on the left and fill out your information. (make sure infrastructure is selected) Apply settings.
Then delete the USB driver and add the network printer.
Let me know if you are still having issues with filling out the EWS for the printer.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can i connect the printer to a wireless network and a usb computer conneconnection at the same time

Similar Messages

Maybe you are looking for