Can I control the genie effect for the editing toolbar?

On my laptop I notice that the photo editing toolbar at the bottom comes up when I move the cursor to the bottom of the screen but on my 27" iMac it is always up at the bottom. Is there a way to turn on the genie effect so the toolbar is not seen on my 27" iMac just as it is not seen on my laptop?

Yes, it is full screen view.
I found autohide toolbar under viewmenu. That solved it. Thanks!

Similar Messages

  • I don't have the colour effects for the camera from iOS7, why?

    Under the iOS7 details, it said there would be colour effects effects for your camera. I downloaded iOS7 and I didn't get them. All my friends have it except for me and my family. Could someone please tell me why we aren't getting it?

    Real time camera filters are only available for iPhone 4S & above. For an iPhone 4, you edit after taking the picture.

  • How can i obtain a user guide for the ipod nano 16GB 5th gen. with out printing it off the computor

    How can i obtain a user guide for the ipod nano 16GB 5th gen. without printing it off the computor.

    You can't, at least not the one provided by Apple.
    B-rock

  • Where can I find the user guide for the 4th gen. ipod touch?

    Can someone tell me where I can find the user guide for the 4th gen. ipod touch? It's not on the manuals section, only the 5th gen. is.

    Try this one.
    http://manuals.info.apple.com/MANUALS/1000/MA1657/en_US/ipod_touch_ios6_user_gui de.pdf

  • How can I modify the Fit, Crop, or Ken Burns effect for the entire movie?

    How can I modify the Fit, Crop, or Ken Burns effect for the entire movie? I've been having to go through them all individually which takes forever.

    You could try  Edit > Select All  then click on the crop button and change the setting from Ken Burns to Fit.
    I find that this only works if you do not have the Automatic Cross Dissolve transitions in place.
    If you do, File > Project Theme and uncheck the transitions and remove them.
    After you have changed from Ken Burns to Fit, you can re-apply them.
    Easiest way in future is to set up your project (File > Project Properties) before you start adding photos.
    z.

  • Can a workflow steps and users for the steps be controlled by contributors?

    Is it possible to have a workflow that allows contributors to select list of steps and users in the steps? The universal set of steps and users for steps can be defined in the designer mode. But the contributors can decide for a particular content item what steps need to be skipped and the users for the step. But atleast one approver step is mandatory. This is some strange requirement that our client is expecting. Is this possible?
    Regards,
    Pratap

    Hi Pratap,
    Short answer: Yes. This has been possible since the Stellent 5.x days (and possibly earlier). We can help you with this if you need services - see our Workflow offerings here: http://bit.ly/b2Ydv6
    Or you can do it yourself. For the details you should see "Setting Up Ad Hoc Step Users" in the workflow admin guide (pp 147, section 9-13) http://download.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/admin/workflow_guide_10gr3en.pdf
    Remember that a "step" is just a container for a certain group of users to take action on certain kinds of content. So you can have one step but if you loop over it 3 times with a different set of users each time you have a defacto 3 step workflow.
    You need 2 things:
    1) the workflow plumbing for the selection of the next "step" (and/or group of users) in the workflow (tokens and subworkflows typically)
    2) a UI for the end users / contributors to actually make the selections.
    For 1) you use tokens that will ultimately resolve to a list of user names who should take action. You might use names (e.g. bcripe) or aliases (e.g. The Legal Team) or other concepts that make sense to the end users who will be participating (e.g. capital expenditure review). Whatever you do the tokens will ultimately yield one or more user ids which become the step users.
    For 2) you can use anything that will make those plumbing values available to the UCM workflow engine. Most common is using metadata fields. They're easy, can be displayed only during workflows (using rules and profiles), and fairly intuitive for most UCM users (if there are not too many!!!). However, you can just as easily write web services, BPEL tasks, or CIS integrations that take form or other triggered input from the user and pass those parameters back to the workflow engine. For more complex workflows this is often a good idea especially if you are dealing with people who are only casual users of UCM or who are interacting with content through another primary UI.
    Either way, let us know what we can do to help. Workflows are a special passion to us here at Fishbowl and we've got supported software to prove it. http://bit.ly/95Rocu
    Warmly,
    Billy Cripe
    Fishbowl Solutions

  • Can I buy a new screen for the 4th gen

         Can I buy a new screen for the 4th gen

    Probably.
    Look online for a company that sells this sort of thing.

  • I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

    I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

    I think this is probably a sign that your network could be better than it is.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • How can I submit a flash demo for the Flash-facebook-fan-page ?

    Hello !
    Can someone tell me where it's possible to submit a demo for the flash-facebook-page ?
    I only find a link to submit an Air-mobile demo (and actually don't understand why because I was not on the Adobe Air facebook page).
    Thank you !
    Tom

    I don't know a lot about this subject but thought I'd give it a shot to answer.  You can use Adobe Encore to create menu systems for your DVD title screen.  As far as Flash is concerned I think you can import your animations into Encore's menu system though I'm not exactly sure how.  If you want to just make an animation that will be played back without interactivity you would just export your Flash animation as a Quicktime MOV file and import it into After Effects for further editing and finishing.  Once you render your mp4 (h.264) from AE you can bring this into Encore to author for your DVD.

  • I CAN SEE ALL SHIP TO LOCATIONS FOR THE CUSTOMER EVEN IF I SELECT ONE BILL

    Dear,
    I CAN SEE ALL SHIP TO LOCATIONS FOR THE CUSTOMER EVEN IF I SELECT ONE BILL TO
    Steps:
    Create customer name "customer 1"
    Under this customer, I create 2 new address
    "Customer A " with tow business purpose
    1-bill to –> customer A
    2- ship to-> customer A after that I link ship to with bill to customer A , I CHECK THE PRIMARY SITE CHECK BOX
    FOR THIS SITE
    "Customer B" with tow business purpose
    1-bill to –> customer B
    2- ship to-> customer B after that I link ship to with bill to customer B
    Now when I navigate to (N) Order management ->order organizer ->new order
    I select the "customer 1" from customer field name I tab to other field bill to
    location it is coming by default as primary site customer "customer A"
    I OPEN THE LIST I SEE tow customer A AND B I SELECT 'B' AS bill to
    When I tab to the other ship to field in also I can see the tow customer " A" and "B" but in real
    setup I link the customer "B" WITH ONE SHIP TO ALSO CUSTOMER"B" WHY I CAN SEE
    ALL LOCATION FOR THE CUSTOMER EVEN IF I SELECT THE ONE BILL TO .
    WHAT THE BENIFIT FROM LINK CUSTOMER SHIP TO FIELD WITH BILL TO IF I CAN SEE ALL LISTS
    FOR CUSTOMER SITE
    Expected Behavior:
    Once I link the ship to location with bill to location I must see when create sales order only the ship to location
    link with the specific bill to already specified
    Business impact:
    This give the user entry ability to enter wrong data or give him the confusion any site I must enter
    thanks

    That is expected behavior.
    You can see the all addresses of account in the list as long as the purpose condition is satisfied. Linking is only for defaulting and not for controlling. If you do not want to see you can create a different account for the B address.
    Thanks
    Nagamohan

  • When opening a Photoshop file with Bridge, how can I control which version of Photoshop the file wil

    When opening a Photoshop file fthrough Bridge, how can I control which version of Photoshop the file will open in?
    I store my PSD files adjacent to the original RAW file from which it was derived.
    If I open the file folder and double click on that PSD file, it opens in CS6. But,if I use Bridge (CS6) to navigate to and open the same file, it first opens Photoshop CS5 and then opens that PSD file in CS5.
    How can I control which Photoshop will open a file I select when opening it through Bridge?.

    Interesting, but it doesn't give a clue what I'm supposed to do. No Photoshop ducuments listed.
    Look at the PSD file on the location Curt provided and search for Photoshop Document. Next to it ideally should show Adobe Photoshop CS6 if you have Bridge CS6 open. Click on it to provide the fly out menu and choose the correct Photoshop from the list.
    But probably something went wrong with your install. By default Bridge chooses the latest version of PS to open its file in.
    Maybe a reset of the preferences might also help you. Can you provide more details about OS version etc.
    And do you have a good reason for keeping your Raw and finished files in the same location. Personally I keep them apart and use a proper file name convention (yyyymmdd and details) so I can easily search for the DNG files in my archive if I needed them but I don't make mistakes in opening the wrong one

  • Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

    Can I use the Ethernet Port  of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
    I have AE 5th gen
    looking to buy (from ebay) the AEX A1264
    Various computers, printers and hubs for the network
    Is this possible to do?

    Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
    Thanks Again.

  • "hotspot" effect for the text

    I made a kind of "hotspot" effect for the text and it looks ok in program, but in test view - it doesn't work.
    I used rectangle animation and layer-mask. Could u help me with this?

    Can you elaborate on what are you trying to do exactly and what is not working when you do Testing Movie?
    You can attach screenshots to show what's on stage and how it comes during Test Movie.

  • What is the highest firmware for the ipod touch 2nd gen.?

    What is the highest firmware for the ipod touch 2nd gen. and where can I download it and place it onto my ipod fast?

    iOS 4.2.1 is the latest version you can install and run on your 2G iPod Touch.  You can complete the update and installation via iTunes.
    iTunes: Backing up, updating, and restoring iOS software
    B-rock

  • Error!! Can not find the delivery details for the delivery Id :

    hi all,
    I have a report which i need to burst in seven different reports wherein my delivery key is column "emp_id". Now when i schedule the report to burst then the report completes with a warning. I see that there are various delivery cycles for the report and for one of the cycles i get the following message
    Error!! Can not find the delivery details for the delivery Id :
    hence, what happens due to this is, even there are successful deliveries for other delivery ids but then i get only two rows of data in each of the seven bursted ouput xls files. wheareas the data runs in thousands of rows for each cycle.
    Hence whats happening is, that due to error /warning in one of the delivery cycles other reports are also not showing data.
    I am not sure whats causing the issue and why i am not getting complete bursted files out.
    Please suggest
    Thanks
    Ronny

    I guess, you are in 10.1.3.3.2 :),
    in the latest release 10.1.3.4.1, there are more enhancement wrto bursting and performance i believe.
    check th release notes
    can you send me the xml and bursting query you have, i can try simulating in my local.

Maybe you are looking for