Can I convert a guest viewer to a member viewer?

Post Author: mwong
CA Forum: crystalreports.com
You can request to have a guest viewer to a member viewer if the following conditions met:1. The guest viewer has not been updated to a starter edition account or a professional edition account (does not have their own report space on crystalreports.com)2. The guest viewer has not been invited to other accounts3. The guest viewer is an active viewer of the administrator's accountOnce these conditions are met, you can send an email to crystalreports.com Support at [email protected]
with the following information:1. The account's email address2. The viewer's email addressUpon validating the information of the account, the guest viewer would be converted.

Hi ISLJanice,
ExportPDF service is used to convert PDF to Word, Excel Powerpoint and RTF document. For JPEG conversion from PDF you would require the complete software i.e. Adobe Acrobat.
For more information of Adobe Acrobat please visit http://www.adobe.com/in/products/acrobat.html?promoid=JOLIR
Thanks for your time on the forum. Please let me know if you have any other queries.
Regards,
~Pranav

Similar Messages

Convert from Quick Viewer to Infoset.

Can I convert from Quick Viewer (SQVI) to Infoset/Query (SQ02/SQ01)?
Thanks.
Best regards.
Gustavo.

If you have created a QuickView and you want to convert it to an SAP Query
report, simply follow these three quick steps:
1. Navigate to the main screen of the SAP Query (SQ01).
2. Follow the menu path Queries > Convert QuickViews.
3. Select your QuickView from the drop-down box and press the Enter button.
You are prompted to type a name for the query; press Enter again to convert
the QuickView.
Here is the document which says how to convert QickVier to SAP Query.
http://searchsap.techtarget.com/searchSAP/downloads/Teach_yourself_SAP_C20.pdf
Regds
Manohar

How can i convert 2k resolution dpx files of a movie to DCP and will they be able to open the harddisk and view the files?

how can i convert 2k resolution dpx files of a movie to DCP and will they be able to open the harddisk and view the files?

AFAIK, this is beyond the capabilities of FCPX/Compressor. This company makes a plug-in, which I have to say I have no experience with. Here is a thread that may give you some other ideas. Good luck.
Russ

How can I convert my other videos to a format that can be viewed on my iPod

How can I convert my other videos to a format that can be viewed on my iPod?
Martin Brossman
[email protected]

Click here for instructions; if you find that the movies have no sound, download MPEG Streamclip and use it for the conversion.
(27741)

Can i convert AIFF audio file into an MP3 file please?

Can i convert AIFF audio file into an MP3 file please? I will be doing this on an imac 2008 model. thank you for help!

Since this is the Logic forum and you may be working in Logic, you dont even need iTunes. To convert Aiff to MP3:
1 - Go to the Bin>Audio Files
2 - Select the Audio File you want to convert ( and not a region or edit of it)
3 - Go to Audio File next to the Link icon ( Audio - Edit - View ) and down the menu to Copy/Convert.. gives lots of options
HTAH
(hope that also helps)
MS

How can I convert a U32 array into binary string?

Hi
I would like to find an efficient way to convert an array of 8192 U32 into a single binary string!!!
the solution below last 550 ms on an RT target to convert 8192 U32.
The same code running on Labview (not RT) last 100ms. I don't understand why there is such a difference.
I've tryed to replace the inner loop and convert by a format string whith U32 on entry and %032b as parameter but it lasted same time.
Thanks a lot

Your picture of your code didn't come through. You can't link to a picture that's on your computer, as a server on the internet cannot access your computer to display the picture for others to see. You have to upload the picture as an attachment. Then, if you want to actually display the picture in the message you have to edit your post, insert a picture, and when it asks for the URL you enter the URL of the picture. You can get the URL when viewing the message, as the link is within the message itself.
As for your question, can you just use the TypeCast function?

I have a 2 page PDF (portrait format), how can I convert the format to landscape?

I have a 2 page (portaait format) PDF file how can I convert the PDF file into landscape format before I change it to XL?

Hi jsremick,
To change the page orientation of a PDF, you need to use Acrobat. (Reader allows you to rotate the page view, but not the pages themselves).
If you don't have Acrobat, feel free to give it a try. You can download the free 30-day trial from http://www.adobe.com/products/acrobat.html.
Best,
Sara

Can I convert my VBA project to some sort of batch submitted executable

Thanks to the help from you all, I have written VBA macros that open huge word documents and pluck out specific information and put it into Excel. The files I've received have grown in size from 1500 to 3500 pages. I'm currently running the VBA
macros by opening the document in word and then clicking "View....Macros...mymacro....Run. The macro then runs for any where from 10 minutes to 2 hours.
Is there a way I can convert my VBA project into some sort of executable so that I can "submit" the word file to the executable? Sometimes I run this on a term server. I'd like to start the job, log off the term server, and then later
check for the resulting excel file.
Is there a way to queue up a list of input files for this?

Hi Denis Backer,
>>Can I convert my VBA project to some sort of batch submitted executable<<
Yes, it is possible. We can write an application to automate open the Word documents and run the macro using
Application.Run. Also we can convert all the VBA project with mange code, however the Office automation is not supported on the server enviroment.
Microsoft does not currently recommend, and does not support, Automation of
Microsoft Office applications from any unattended, non-interactive client
application or component (including ASP, ASP.NET, DCOM, and NT Services),
because Office may exhibit unstable behavior and/or deadlock when Office is run
in this environment.
You can get more detail about it from link below:
Considerations for server-side Automation of Office Print Print Email Email
And here are two helpful links about Office automtaion using C# for your reference:
C# app automates Word (CSAutomateWord)
How to automate Microsoft Excel from Microsoft Visual C#.NET
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
That is a really curious disclaimer considering the number of options for automation Microsoft itself integrates into its products.

How I can access "Convert Colors..." button in Adobe Acrobat XI using applescript, or add this button to menu bar?

Hi, I'm writing applescript to automate Adobe Acrobat XI, I'm missing only one line of code - opening dialog window of "Convert Colors..." tool. It was easy in Acrobat 9 but some reason it's complicated in Acrobat XI.
Is there an option to add "Convert Colors..." as menu item into menu bar?

Thanks Gilad D. I created JS file with simple code
app.addMenuItem({cName:"Convert Colors", cParent:"View", cExec:'app.execMenuItem("ColorConversionMenuItem");'});
and I added it into acrobat (USER/Library/Application Support/Adobe/Acrobat/11.0/JavaScripts/).
I enabled menu items JavaScript execution privileges in Acrobat Preferences.
Now I can open "Convert Colors" from main menu bar, and create applescript which do the same.

Can not converted to be a charter-type field

Hi everyone,
As i m new in abap . i wrote this code and received charter type error.
*& Report ZT11
REPORT ZT11.
DATA: aa type lfa1.
     tables lfa1.
     select * from lfa1 into aa where lifnr > 'Z' .
         write / aa.
        endselect.
    if sy-subrc <> 0.
         write / 'No records found'.
        endif.
error is
'AA' can not converted to a character-type field.
plz help to reslove the error .
thanks in advance.
Edited by: Faisal Abbasi on May 9, 2010 11:19 AM

Hi Dear,
This is Unicode problem, In unicode systme some restriction in programing.
There is three kid of data type
Character Processing ( C, N, D, T and STRING ).
Byte Processing Mode ( X and XString ).
Numeric Data Type ( I, P , F ).
whenever in structure all kind of data types are used then you can not use WRITE and then whole structure name.
in LFA1 in ECC6.0 if any custom fields are not added then up to length 1232 is determined as Character.
so if you will give aa(1232) it will work similarlly other kid of remainig data tpe you move in another structure of required format and then check.
REPORT ZT11.
DATA: aa type lfa1.
tables lfa1.
select * from lfa1 into aa where lifnr > 'Z' .
write / aa(1232).
endselect.
if sy-subrc 0.
write / 'No records found'.
endif.
For better Understanding Check
The following structure has both character-type and non-character-type components:
BEGIN OF STRUC,
a TYPE c LENGTH 3,    "Length 3 characters
b TYPE n LENGTH 4,    "Length 4 characters
c TYPE d,             "Length 8 characters
d TYPE t,             "Length 6 characters
e TYPE f,             "Length 8 bytes
f TYPE c LENGTH 28,   "Length28 characters
g TYPE x LENGTH 2,    "Length 2 bytes
END OF STRUC.
The Unicode fragment view splits the structure into four areas F1 - F5.
[ aaa | bbbb | cccccccc | ddd | AAA | eeee | fffffffffffff | gg ]
[            F1               | F2 | F3 |       F4      | F5 ]
Offset/length access is only possible for the character-type initial fragment F1. Specifications such as struc(21) or struc7(14) are accepted and are handled as a single field of type c. An access such as struc57(2), for example, is not permitted in Unicode systems.

Can't convert web page to PDF in IE

Hi, I was using Window XP with Adobe Acrobat Pro 8. It's running pretty well. I just got a new PC with Window Vista Enterprise. When I installed the Adobe, I got problem asking for "AdobePDF.dll". Yes, I did hotfix #930627 and updated Adobe to 8.1.1 but there is still error. I can't convert the webpage to PDF in IE. I checked the plug-in in IE, all the PDF plug-ins are enabled. But if I clicked on the Adobe tool bar in IE, none of the menus responses. Same thing happens to the popup PDF menu.
Can anybody help me out?
Thanks.

http://kb.adobe.com/selfservice/viewContent.do?externalId=329345
copy the above link into a web page has the following information, so try one or all of the following. Its usually a config problem and the adobe support people were not very helpful in finding the answer, but hopefully the following will resolve the issue
PDFMaker icons are missing in Internet Explorer (Acrobat 6 and 7 on Windows)
Issue
The PDFMaker icons are missing in Internet Explorer.
Detail
You are using Acrobat 6 or 7 on Windows.
Solutions
Do one or more of the following solutions:
Solution 1: Unlock the Internet Explorer toolbar.
To determine if the toolbar is locked and unlock it if necessary:
1. Open Internet Explorer.
2. Choose View > Toolbars:
-- If the Lock The Toolbars option is selected, then click Lock The Toolbars to clear the check mark.
-- If the Lock The Toolbars option is not selected, then the toolbars are already unlocked.
3. Close Internet Explorer and then re-open it.
Solution 2: Set Internet Properties to enable third-party browser extensions.
1. Close Internet Explorer.
2. Open Acrobat and choose Edit > Preferences.
3. Choose Internet from the list of categories on the left, and then click the Internet Settings button.
4. In the Internet Settings window, click the Advanced tab.
5. Under the Browsing section, select "Enable third-party browser extension (requires restart)" and Click OK.
6. Start Internet Explorer.
Solution 3: Do a repair of Acrobat.
1. Start Acrobat.
2. Choose Help > Detect And Repair.
3. When the repair process is complete, restart your computer.
Solution 4: Make sure PDFMaker for Internet Explorer is installed properly.
1. Choose Start > Settings > Control Panel and double-click Add/Remove Programs (Windows 2000), or choose Start > Control Panel and double-click Add Or Remove Programs (Windows XP).
2. Click Adobe Acrobat [version] and choose Change. You will enter the Acrobat Setup.
3. Choose Modify from the Setup dialog box.
4. Expand Create Adobe PDF.
5. Click the Acrobat PDFMaker menu and choose "This feature, and all it's subfeatures, will be installed on local hard drive."
6. Click Next, and then click Update.
Solution 5: Disable Firewall, Antivirus, or Internet Blocker software.
Certain protection programs prevent plug-ins from loading in Internet Explorer. Disable any such software and restart Internet Explorer.
Original VersionsAcrobat Professional 6.0Acrobat Professional 7.0Acrobat Standard 6.0Acrobat Standard 7.0
TechNote DetailsLast Update: 01-04-2007
ID: 329345
OS: Windows
Permanent Link: http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=329345
Products Affected:
Acrobat Professional

Can't convert AIFF to MP3

Can’t convert songs in iTunes. I have iTunes 7.02. I’ve followed the process as detailed in iTunes help as well as in a “missing manuals” book.
Here’s what I’ve done to try to change a song from AIFF file to MP3:
1) In iTunes, chose iTunes > Preferences
2) Chose “Advanced”
3) Chose “Importing”
4) Was told to use “Pop-Up” menu to select between: AAC, AIFF, Apple Lossless Encoder, MP3, or WAV;
However, there is no “Pop-Up” menu........never has been;
So,
I used the “Import Using” window and scrolled to select MP3
5) Clicked “OK”
6) In an iTunes Playlist, clicked once to highlight the song I wanted to convert from AIFF to MP3
7) Went back to Preferences > Advanced to try and click “Convert Selection to MP3”............. But,
there is no such command in the Advanced, Importing window.
Presumably, after you do that (which I couldn’t) iTunes automatically converts selected song to the format I’ve chosen, plays it through while converting, resulting in a duplicate song, only in MP3 format. The original AIFF song is supposed to remain in the Library.
So why aren’t things happening they way iTunes Help and the book I’m using said they would?
Finally, after changing things in iTunes Preferences, how do I leave "Preferences": for example: should it always be left: Import Using: AIFF Encoder and Setting: Automatic?
My iMac specs should be listed below.
Any suggestions? Thank you in advance.

hi nemateoz,
here are some clarifications;
"However, there is no “Pop-Up” menu."
correct, its a drop-down list.
"Went back to Preferences > Advanced to try and click “Convert Selection to MP3"."
no, this option isn't located in the Advanced tab from the iTunes preferences but in the menu "Advanced" of iTunes (as Files, Edit, etc). This may be confusing thaugh.
"The original AIFF song is supposed to remain in the Library."
Correct; files will be duplicated. if you want to sort them easily, right click on any colum title of your library view and select "Genre". this will add a colum showing the file genre (aiff, mp3, etc) so you can sort them.
"So why aren’t things happening they way iTunes Help and the book I’m using said they would?"
i don'T know where you got your information. maybe you just got confused between advanced menu and advanced tab in preferences.
"Finally, after changing things in iTunes Preferences, how do I leave "Preferences": for example: should it always be left: Import Using: AIFF Encoder and Setting: Automatic?"
depends on what you would like. usually, people will convert aiff files to mp3 or m4a directly from CD; i.e. after inserting a CD, by just clicking "Import CD" button on the lower right corner will import/convert files based on your itunes preferences settings.

Can I convert a from from Adobe Forms Central to a PDF Form?

Can I convert a from from Adobe Forms Central to a PDF Form?

Yes, you can save a FormsCentral form as a PDF form. In FormsCentral, the menu item when in design view is: File > Save as PDF Form

How can I convert Float numbers which are represented as 'E-05' to full precision

I have over 6,000 records which all have 'E-05' in the field.
It should actually be full precision, such as: 0.000046793055472781
How can I convert all of these? There are around 600,000 records in the whole table, so I only want to convert the 'E-05' records. For some reason these are incorrect, but all the others are totally fine.
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

If they are float values, they have the full precision you can get with a float value.
Keep in mind that what you see in management studio is a textual representation of the value. It is not the value itself. A float value is stored as 53 bits of mantissa and an 11-bit exponent which is a power of 2.
To view the value without the exponent, you can cast to decimal, although this will give you a slightly different value. You can also use the str function:
DECLARE @f float
SELECT @f = 0.000046793055472781
SELECT str(@f, 20, 18)
However, formatting of the value is best done in the presentation layer. You should not change the data you have in the table. But if the source is actually exact decimal values, maybe you should use a decimal data type instead.
Erland Sommarskog, SQL Server MVP, [email protected]

I have a PDF in russian origin how can I convert it correctly?

I have a PDF in russian origin how can I convert it correctly into MS word?

Hello,
which program do you use? For example "ExportPDF" has no Russian language options. Adobe Acrobat however can do it. In this case - if you don't have it at the moment - you should use the 30-day trial >>> see http://www.adobe.com/products/acrobat.html
Hans-Günter
P.S.
A a detailed opinion with another point of view you will find there:
How can I convert a Russian pdf file, using Adobe Acrobat XI Pro, to a Word document?

Can I convert a guest viewer to a member viewer?

Similar Messages

Maybe you are looking for