Can I convert my iPad2 to 3G?

Can I convert my iPad2 to 3G?

If you already have the wifi, and now want 3 g you can use the hotspot in your phone, if you have one, or get a mifi device from your carrier.  They cost ( in the us) around $100 and when you get a plan from your provider, work with the pad just fine.

Similar Messages

  • Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it?

    Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?

    Hello djensen1x,
    Could you please let me know what version of Acrobat are you using.
    Also, tell me your workflow of combining those PDF files?
    Please share the screenshot of the error message that you get.
    Hope to get your response.
    Regards,
    Anubha

  • How can I convert an int to a string?

    Hi
    How can I convert an int to a string?
    /ad87geao

    Here is some the code:
    public class GUI
        extends Applet {
      public GUI() { 
        lastValue = 5;
        String temp = Integer.toString(lastValue);
        System.out.println(temp);
        showText(temp);
      private void showText(final String text) {
        SwingUtilities.invokeLater(new Runnable() {
          public void run() {
            tArea2.setText(text + "\n");
    }

  • How can I convert an InputStream to a FileInputStream ???

    How can I convert an InputStream to a FileInputStream ???

    Thanks for you reply, however, I am still stuck.
    I am trying to convert my application (which runs smoothly) to a signed applet. The following is the original (application) code:
    private void loadConfig() {
    String fileName = "resources/groupconfig";
    File name = new File(fileName);
    if(name.isFile()) {
    try {
         ObjectInputStream in = new ObjectInputStream(new FileInputStream(fileName));
         pAndGConfig = (PAGroupsConfig)in.readObject();
         in.close();
         return;
    } catch(ClassNotFoundException e) {
         System.err.println("++ERROR: "+e);
    } catch(IOException e) {
         System.err.println("++ERROR: "+e);
    System.out.println("Can't find file: " + fileName);
    Because all code and resources now reside in a Jar file (for the signed applet), I must use the following line to access the resources:
    InputStream is = this.getClass().getResourceAsStream(fileName);
    I then need to convert the 'InputStream' to 'ObjectInputStream' or 'FileInputStream' so that I can work with it.
    I would be very grateful if you could help shed some light on the matter - Cobram

  • How can I convert an OVM vm (.img) to VDI (virtualbox)?

    Hi,
    how can I convert an OVM vm (.img) to VDI (virtualbox)?
    Is .img format a raw image? If yes can I use "VBoxManage convertdd" to convert from .img to vdi?
    tnx & regards,
    S.

    Hi,
    "VBoxManage convertdd" solved.
    Regards,
    S.

  • How can I convert an AUDIO MPEG-4 to an MPEG3 format? I need it for a Powerpoint Presentation

    How can I convert an AUDIO  MPEG-4 to another type of file, such as MPEG3  or mp3

    Use Handbrake.
    You can download it for free from this site:
    http://www.macupdate.com/info.php/id/12987/handbrake
    Good luck

  • How can I convert from color balance in FCE to color balance in FCPX?

    Let me start off by saying that I've been having an issue with a project in Final Cut Express - a project I'd put a lot of time into and thought I was finished with. Before continuing on, I encourage you to take a look at my other thread: https://discussions.apple.com/message/18702933?ac_cid=op123456#18702933
    Realizing that there may be no one who can walk me through fixing my project as is, I decided to download a trial version of Final Cut Pro X and see if I could replicate my project there and have more success (after all, it was only a matter of time before I switched anyway).
    So, in my original project in FCE, I keyed a lot of frames with different color balances. I downloaded the Ripple Training color balance effect to do just that, but the sliders are set up differently. In FCE, they range from -1 to 1. In FCPX, they range from 0 to 1. I'm wondering how I can conveniently convert the values from FCE to FCPX. Being terrible at math has made this much harder.
    Just by drawing a diagram, like the following, I can figure out the basics:
    FCE
    [-1]-----[-.5]-----[0]-----[.5]-----[1]
    is equal to:
    FCPX
    [0]-----[.25]-----[.5]-----[.75]-----[1]
    Since I have very specific numbers, not all of which can be easily converted using a basic diagram like the one above, I definitely need some help here. For example, one of the values in FCE is .77. What would that be equal to in FCPX? It's probably something simple, but like I said, I'm stupid when it comes to math.
    Thanks to anyone who can provide me with some help here, although I still hope that I'll end up having no reason to redo everything in FCPX.

    Well, the "math answer" is .885…but I'm afraid that's not likely to be of much help. FCPX and FCE have absolutely nothing in common, including filters land color correction. So even if you sent the time comverting all your numeric values, I'm guessing you'll wind up with a mess and be very frustrated with all the time wasted in the workaround.
    If I read your original FCE thread correctly, I if it were my project., I'd do a test on a short clip in X to see whether yoi can the effects and quality you expect. If you can, great.  Build you project from scratch and learn a new NLE at the same time.
    Good luck.
    Russ

  • Can I return my iPad2 for the new iPad

    My parents bought me the new ipad2 in January and they also pay for the one year guarantee. The iPad 2 is brand new in good condition. Now, can I return my ipad2 for the new iPad without paying?

    No, unless the store you bought it from has a very generous return policy - the Apple Store official policy is 14 days. The one year warranty is on defects in the product, not for upgrading. You can sell your iPad and use the funds to buy a new one, but you will likely sell for less than you paid.

  • I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

    I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

    It's almost impossible.  The new iMacs have a Target Display Mode, but it's built to do that.  Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15.  In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
    By the way, I found your answer by searching this forum.  I would suggest using the search function here in the futuere.

  • How can I convert an array off byte into an Object ?

    Hi folks...
    I�m developing an application that comunicates a PDA and a computer via Wi-Fi. I�m using a DataStream ( Input and Output ) to receive / send information from / to the computer. Most off the data received from him is in the byte[] type...
    How can I convert an array off byte ( byte[] ) into an Object using MIDP 2.0 / CLDC 1.1 ?
    I found on the web 2 functions that made this... but it uses a ObjectOutputStream and ObjectInputStream classes that is not provided by the J2ME plataform...
    How can I do this ?
    Waiting answers
    Rodrigo Kerkhoff

    There are no ObjectOutputStream and ObjectInputStream classes in CLDC. You must know what you are writing to and reading from the DataStream. You should write the primitives like int, String to the DataOutputstream at one end and read those in exactly the same sequence at the outher end using readInt(), readUTF() methods.

  • Can  I convert JarEntry to File?

    Hi :
    if i have a instance of JarEntry class,how can i convert it to a instance of File? is it impossble? if yes,what should i do?
    Mile

    Hi ChuckBing:
    i'm implementing DSMCCOject class and ServiceDomain class.A ServiceDomain is mapped to one JAR File; a DSMCCOject is mapped to one entry in the JAR File and DSMCCOject extends from java.io.File,
    if i directly use the entry path in the Constructor method of DSMCCOject ,many functions of java.io.File can't be used, i don't know whether the path is wrong or other reasons, but i can get the instance of JarEntry correctly,so i try to convert it to a instance of File. is it right i think like this?
    Thanks
    Mile

  • How can I convert a class file to Exe file

    hai
    How can I convert a class file to Exe file

    Please search the forums before asking questions - this has been answered hundreds (really!) of times.

  • I can´t activete my Ipad2 after opdating to iOs 7.0

    Hey.
    I can´t activete my Ipad2 after opdating to iOs 7.0?
    I tried to do this via iTunes and via wifi but nothings help.
    Tried to reinstall with no luck.

    If you have a backup, try this:
    1. Settings>General>Reset>Erase all content a settings
    2. Set Language; tap arrow on top right
    3. Set Country; tap Next
    4. Enable Location Service; tap Next
    5. Setup WiFi (connect to internet)
    6. Setup as new; tap Next
    7. Sign-in with Apple ID
    8. Agree with Apple Terms and Conditions
    9. Enable iCloud
    10. Enable Find My iPad
    11. Register iPad
    12. Start using iPad

  • I can't sync my ipad2 after updating to ios5. Says 'waiting for changes to be made'. Any ideas?

    I can't sync my ipad2 after updating to ios5. Message is 'waiting for changes to be applied'. Any ideas?

    Have you tried doing a Restore?
    For some problems the solution is to download & reinstall iTunes.
     Cheers, Tom

  • How can I convert multiple files at one time and not one at a time

    How can I convert multiple files at one time and not one at a time

    Hi Plissey1950,
    Sorry for the lengthy delay to a response.  Are you trying to convert multiple files to individual PDF files at the same time? (not combine them).  If so, you'll need to use Adobe Acrobat for this function. The CreatePDF service does not have the ability to convert multiple files to multiple individual PDF files.
    Thanks,
    David

Maybe you are looking for