Can I creat motion tween on time line using as2?

Hi!
I want to do effect on spinning of images??
so that is possible or not?
Thanks,
JaxNa

Hi,
You can use Tween class to do so.

Similar Messages

  • How do I create 2 motion tweens for one line of text?  the text needs to "fly-in-right", I can do that,

    how do I create 2 motion tweens for one line of text?  the text needs to "fly-in-right", I can do that, then it needs to "fly-out-bottom" again, I can do that, but not on the same line of text...any ideas...

    my question
    1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
    2- how can create manual process to fetch row into specific items in page ( i tray these code
    SELECT col1, col2, col3 ....
    INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
    FROM table
    WHERE id = :P_id ) but no data retrieve .
    I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
    ORA-01403: no data found : Unable to fetch row multiple automated row fetch
    On your second question, the manual process should work provided:
    P_ID has a value when the process executes. You can do it this way:
    i. Make this process as a on-load After/Before header process
    ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes)

  • Can't properly create motion tweens between two keyframes in flash CS4

    I'm trying to create a flash animation of a wing flapping using three keyframes. The first keyframe is at frame 1. I then created a second keyframe at frame 5 by pressing F6, and then I created another keyframe at frame 10 by pressing F6. At frame 5, I rotated the wing so that it is going up. Frame 10 is the same as frame 1.
    frame 1:
    frame 5: frame 10:
    I right clicked on a frame between frames 5 and 10 and then clicked the first option, "Create Motion Tween"; I then performed the same action on a frame between frames 1 and 5. When I preview or test the movie, there is no transition between the frames. From frame 1 to 5, there is supposed to be a transition of the wing flapping up. From frame 5 to 10, there is supposed to be a transition of the wing flapping downwards to its initial position. Instead, when I test the movie, the wing remains still until frame 5 and instantly goes to its "wing up state" and when it gets to frame 10, instantly goes to its "wing down state".
    Here is what the timeline looks like after I've made the changes mentioned above:
    I'm using Flash CS4 to make the animation but the tutorial I'm following is using Flash CS3. I know I can use other methods to create the motion tween but I want to know why the method I'm using isn't working.

    I did switch to classic tweening. I pressed F6 to make a keyframe at frames 5 and 10. I then right clicked on a frame between frames 1 and 5 and then clicked
    "create CLASSIC tween"; did the same thing between frames 5 and 10. I'm not seeing the transitional frames between frames 1 and 5 that the tutorial showed.

  • How can i create a new and tableless database using database configuration

    How can i create a new and tableless database using database configuration

    How can i create a new and tableless database using database configuration
    Just don't install the sample schemas. See the installation guide
    http://docs.oracle.com/cd/E11882_01/server.112/e10831/installation.htm
    Using the Database Configuration Assistant
    When you install Oracle Database with the Oracle Universal Installer, the sample schemas are installed by default if you select the Basic Installation option. Selecting the sample schemas option installs all five schemas (HR, OE, PM, IX, and SH) in the database. If you choose not to install the sample schemas at that time, you can add them later by following the instructions in section "Manually Installing Sample Schemas".
    Choose a custom install and don't install the sample schemas.
    All other schems/tables installed are REQUIRED by Oracle

  • How can i create  excel sheet with multiple tabs using utl file?

    how can i create excel sheet with multiple tabs using utl file?
    any one help me?

    Jaggy,
    I gave you the most suitable answer on your own thread yesterday
    Re: How to Generating Excel workbook with multiple worksheets

  • Can you create apps after 1st May 2015 using Adobe DPS single edition?

    Can you create apps after 1st May 2015 using Adobe DPS single edition?
    I currently have SE via creatieve cloud - one of the only reasons we switched to CC was for the DPS SE.
    Does anyone know if this capability will just be 'switched off' at midnight 1st May 2015?? There are huge costs for going the enterprise route but with no date in sight for Publish to be launched I am not sure I can wait for this, or should I???

    Adobe states: Please note that the Digital Publishing Suite, Single Edition, service will be available for use until May 1, 2015, but beyond that date the service will no longer be available.
    So essentially my licence will expire on 1st May - Adobe's note just mentions 'service' -  even though part of CC and I will not be able to maintain my app or create any more IPA's after 1st May. I can't beleive there is nothing to switch over to other than paying thousands of pounds for enterprise??
    Just all so vauge, feels like a plug is going to be pulled and thats it??? Maybe I am missing something?

  • Can't back up MBA on Time Capsule using Time Machine Via Wifi

    Hi,
    I can't back up MBA on time capsule using Time Machine via wifi.  I bought the time capsule new Dec 2014.  I was able to backup for the 1st 3 days.  In less than a week time, a message came up every time I tried to back up: "Time Machine couldn’t complete the backup to AirPort Time Capsule. The backup disk could not be found. Make sure the backup disk is connected or select a different backup disk".  So, there's been no backup at all for almost 3 weeks.  Wifi connectivity under Airport Utility is fine.  Green light on the time capsule is on etc.
    Please kindly advice what is going on with this time capsule wifi backup.  Do I have to connect the time capsule with MBA with a physical cable to perform this job?
    Many thanks in advance,
    On Ki

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • Can I create a "stage" in Animate and use it in Muse to create a responsive site?

    I want to use Muse to build my site and Animate for some elements. I need a responsive site. Muse does not do that but Animate does. That is crazy! How can I combine them? There has got to be a way. Someone smarter than I has figured it out I am sure, I am hoping they chime in.
    Can I create the "stage" in Animate and use it in Muse?

    You are probably right but I was looking for the ease in creating only one and letting it do the work.
    Now that I think about it....my site will have video embedded and a link for Ustream. That won't work on a mobile device if it is part of a responsive design will it?
    Oh, there is soooo much to all of this!
    Newbie anxiety!
    This is why I chose Muse and Animate, I am too new to code it on my own.

  • How can I  get System dates  with time scheduler using threads

    how can I get System dates with time scheduler using threads.is there any idea to update Date in my application along with system Date automatic updation...

    What the heck are you talking about and whatr has it to do with threads?
    Current time: System.currentTimeMillis. Date instances are not supposed to be updated.

  • How can i create a Laptop like the ones use in SAP TecEd?

    How can i create a Laptop like the ones use in SAP TecEd hands on labs? with all the NW products install on it.

    Hi,
    Vague question, but to create a laptop with the solution installed - you need to order the solution and and then install it on the laptop. Or download trial versions from SCN and install those as well.
    Regards,
    Srikishan

  • How can i assign an identifier to a movieclip using AS2 ???

    Hey guys, i'm using the scrolling pane component in my
    project. i used to enter in the content path, the identifier of the
    movieclip which i set through the library. But now i wanna give it
    a movie clip that i've created in my code...so how can i assign an
    identifier to a movieclip using AS2 so that i can use it with my
    componenets ???? THANX

    I'm trying to make a script that goes through a folder recursively, checks for every folder if it's name is "template", and if so it changes the icon of that folder to an icon
    I chose.
    I searched for an answer here, and I've only managed to find a way to assign an icon to a shortcut, but not to an existing file.
    Thanks in advance (:

  • Create shape and motion tween of a line

    I am trying to create a line graph in which the line is
    following a certain path over time like in a simulation. The line
    starts with a point in frame 1 and ends with a smooth not straight
    line in e.g. frame 50. The line has to "run" like in an
    electrocardiogram.
    Is it possible to create this in flash?
    If so, how? I tried to combine shape and motion tweening, but
    that didn't work.
    Thanks for your help

    This is doable
    If it is a fixed set of lines you would create the lines in a
    MovieClip symbol and then slide the MovieClip symbol under a mask
    by changing the _x property with either onEnterFrame or
    setInterval.
    If you have to draw the lines from dynamic data at run time,
    you use the
    MovieClip.lineStyle
    and the
    MovieClip.lineTo
    properties on a MovieClip that you then would scroll under a mask
    if you are looking for the electrocardiogram rolling paper effect.

  • Can't get motion Tween to work - just upgraded from a previous version to CS4

    I am attempting to create a motion tween between two keyframes.  The image is the same...the first keyframe has the image set to an alpha of 0 and the second keyframe some 20 frames down the timeline is set to an alpha of 100%.  The keyframes are on the same layer.  The image has been transformed to a symbol.  Yet when I double click between the two keyframes and create the motion tween so the image will fade from 0 to full view at 100% nothing happens.  I don't see the familiar arrow that normally indicates a motion tween between the two keyframes.  I've created this transformation a thousand times before but don't understand what is different in CS4 that isn't creating the tween.  When I double click on a frame in between the two keyframes it indicates I can remove motion tween so, it makes me believe the motion tweening has been set but, it isn't.
    I am quite frustrated and don't understand if I haven't set something in the preferences so the tweening will work or just what is going on.
    Help!

    And here's the article that was written specifically to update your skills with all the changes between the earlier tweening and new tweens in CS4:
    http://www.adobe.com/devnet/flash/articles/motion_migration_guide.html

  • How can I create an animated countdown timer?

    Is there a way to create an animated countdown timer in Adobe Fireworks (animated gif)?
    Thank you

    In the Edit workspace, place the images you want to appear in each frame of the animation on separate layers of the Layers panel. For example, to create an animation of an eye blinking, you would place an image of the open eye on one layer, and an image of the closed eye on another layer.
    Choose File > Save for Web.Note: If your image has multiple layers, you can also open the Save For Web dialog box from the Save As dialog box by choosing CompuServe GIF Format and selecting Layers As Frames.
    Optimize the image in GIF format.
    Select Animate.
    Set additional options in the Animation section of the dialog box:
    Loop Continuously repeats the animation in a web browser.
    Frame Delay Specifies the number of seconds that each frame is displayed in a web browser. Use a decimal value to specify fractions of a second. For example, use .5 to specify half a second.

  • How can I create a directory on my server using FTP in applescript?

    Hi
    I have created a script which successfully uploads files to my server using FTP and a curl command.
    The one thing I haven't worked out how to do is how to create a directory on my server using applescript. At the moment I have to manually create the correct directory for the script to work, but would like to be able to automate everything.
    Would this be possible?
    Thanks
    Nick

    Thanks Bernard.
    I have tried that and still get the error message:
    "curl: Can't open '--ftp-create-dirs'!
    curl: try 'curl --help' or 'curl --manual' for more information
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    0 0 0 0 0 0 0 0 --:--:-- 0:00:01 --:--:-- 0
    curl: (9) Server denied you to change to the given directory"
    The other relevant parts of the script are:
    set ftp_url to "ftp.****.org.uk/artists/" & artistName2 & "/assets/"
    set ftp_username to "*****@*****.org.uk"
    set ftp_password to "****"
    set ftp_entire to ftp_username & ":" & ftp_password & " ftp://" & ftp_url
    set outPath to outputFolder & fileCounter & ".jpg"
    and then...
    do shell script ("curl -T --ftp-create-dirs " & outPath & " -u " & ftp_entire)
    Like I said, all works fine when the directories are already in place. I have permissions for the artists folder set to "777", i.e. writable. Because the script is trying to create two directories at once, i.e. "artistName2" and then "assets" under it, I wondered if this was significant, but then I tried with just one new directory, and still got the error.

Maybe you are looking for