Can I create an external boot drive for an updated Mac OS Maverick system?

I'm currently running Mac OS Snow Leopard (10.6.8) on my 24" iMac and would like to clone my current drive to an external drive & then update that external drive to Mac OS Maverick. First, can this be done to create an external Boot drive for my iMac System? Secondly, can I then select the internal system (OS 10.6.8) or the external drive Maverick OS system at boot time?

Probably will depend on just what your machine is - i.e. how current and fast is the internal hardware.
Generally though, the performance booting off a firewire 800 should be fine for most things with little if any system lag.  My late-2008 MBP ( 2.53Ghz core-2 duo, 8GB RAM) runs quite well when booted from a firewire 800 drive (7200rpm - even my 5400rpm portable clone is perfectly useable).
Just remember if using the external for a long or serious work session, if the power goes out, that external is not going to be powered off battery (I keep my full size external drives plugged into a UPS because of that).

Similar Messages

  • Creating a Mavericks USB boot drive after the horse has bolted.  Can I create a bootable USB drive from my iMac after installing Mavericks without saving the Install OS X Mavericks.app file?  Do I need to re- download the whole 5.29 Gb again?

    Creating a Mavericks USB boot drive after the horse has bolted.  Can I create a bootable USB drive from my iMac after installing Mavericks without saving the Install OS X Mavericks.app file?  Do I need to re- download the whole 5.29 Gb from the App Store again?  My problem is my 4Gb/month allowance on a 12 month contract.  I cannot purchase a data block from my ISP and although my speed is theoretically slowed to 64k after reaching my 4Gb, it actually ceases to download in reality.

    HI tasclix, it depends what you mean by an OS X boot drive.
    If you want a recovery disk from which you can reinstall (by re-downloading) or recover from a time machine backup, then nbar is correct.
    If, however, you want to boot and run the OS X installer from the USB drive (so that you don't need to download again), then you will need a copy of "Install OS X  Mavericks.app"; see this article:
    http://support.apple.com/kb/HT5856
    Before downloading again, search your system to see if the installer is still there - it's usually in the /Applications folder unless it has been deleted, but check your whole system for it anyway, you never know, you might still have it somewhere.
    Message was edited by: SilverSkyRat

  • How can I use my external hard drive for my iphoto instead of my mac book pro memory?

    i don't know if this question has been asked before: how can I use my external hard drive for my iphoto instead of my mac book pro memory? just like itunes all my song are save on my external hard drive. make sense?

    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • Can I use an external hard drive for my ipad mini?

    Can I use an external hard drive for my ipad mini?

    There are some wireless external hard drives that can be used with the iPad.
    The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
    Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
    Another option:
    Expand your iPad's storage capacity with HyperDrive
    http://www.macworld.com/article/1153935/hyperdrive.html
    On the road with a camera, an iPad, and a Hyperdrive
    http://www.macworld.com/article/1160231/ipadhyperdrive.html
     Cheers, Tom

  • Can I use my external hard drive for additional storage on my ipad?

    can I use my external hard drive for additional storage on my ipad

    With the Camera Connection Kit you can input data from an external USB device to the iPad, but you cannot write from the iPad to the connected drive.

  • How can I use one external hard drive for both Time Machine and iPhoto Library?

    I have been using a 1 TG LaCie external hard drive for Time Machine backups.  My (older) Mac has 160 GB and is almost full.  I would like to move my iPhoto Library to the external hard drive, but I've heard Time Machine doesn't share one space well.  Should I
    1.  create another partition (but will this erase what I've already saved) with Disk Utility?  *I am running Snow Leopard*
    2.  create another volume to use for iPhoto, and if so, should the two volumes be of equal size?
    3.  leave it with one partition and move the iPhoto Library to the same partition with Time Machine back ups?
    I know I don't need the entire 1 TG for back up of 160 GBs.  Please advise the best path to take.  Thank you!

    You are getting incorrect information from your ASP. If you look at drive specifications the heat generated is no different for high vs low capacity drives.
    I have upgraded the internal drive in my iMac 2007 with a 3TB Hitachi drive without any heat issues or other problems.
    Larger hard drives have higher density platters so to access any given amount data the drives travel a shorter distance. Higher capacity drives should therefore run cooler than lower density drives because the drive spends less time spinning to access data.

  • Can I use one external hard drive for 3 of my Macs?

    I have a 2007 white MacBook, a 2011 MacBook Pro, and a 2013 MacBook Air.
    I want to be able to transfer all of my precious family photos off of my MacBook and Macbook Pro onto an external hard drive and then wipe those computers clean, and then I want to be able to backup and wipe clean my Macbook Air so that I can update it to Mavericks.
    Can I use one external hard drive to do this for three of my Macs? Will it be compatible with all of them? And will I still be able to use the hard drive with my Air once it is updated to Mavericks?
    Which hard drive do you recommend?

    1. Yes. Note that anything you want to keep should be on at least two drives in case one of them fails.
    2. Yes.
    3. Yes.
    (110959)

  • Can I use an External Hard Drive for both my Powerbook ad my PC?

    I would like to purchase an external hard drive for safety reasons.
    Can I store both information of my PC and my Powerbook on the same ext. hard drive? Probably a dumb question but I'd still like to know...
    Thanks in advance.
    Milli.

    Any should do. Buy an external enclosure, purchase a bare drive of your choice, do your own installation. Takes 5 minutes. Save a little money. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
    Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
    Cool Drives
    OWC
    WiebeTech
    Firewire Direct
    California Drives
    NewEgg
    All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.

  • How can I use an external hard drive for capturing? I don't have enough mem

    I'm new at this...I have a Powerbook G4 and not nearly enough memory for capturing a full size video. Is there some way to send it to an external hard drive- for capturing, then burn it in my laptop? Would that external hard drive have to have IDVD loaded on it?

    Hi artdrake
    Just to add to the already good advice posted above.
    Another possible approach which works for me, assuming the ext. FireWire HD is large and fast enough (I recommend at least 120GB and 7200rpm) is to format the the ext. HD as stated above (journaled) and then clone your existing startup volume (using Carbon Copy Cloner) to the ext. Hard Drive. This will circumvent installing a fresh OS as well as all the iLife apps to the ext. device. You will simply make an exact copy of your laptops HD to the ext. volume. It takes me all of 30-40 mins. on my G4 system to do this procedure whereas installing everything from scratch may take several hours.
    Click Here for example/s:
    Once this is completed and assuming the ext. drive is connected securely via Firewire, Restart the computer while holding down the option key. Select the ext. FW HD. Once your G4 laptop is booted to external drive, use it as you would the primary drive. The only difference is that you now have plenty of room to capture to or to burn a DVD. This saves you from consuming much needed HD space on the G4 laptop plus it also serves as a fully operative backup hard drive for your G4.
    Hope this suggestion works as well for you as it does for me. Feel free to post back with additional questions/concerns.
    (3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8) My ichatav AIM account is: SDMacuser1 (Please use Text chat prior to video)

  • External desktop drives for early 2008 Mac Pro: USB 2.0 or 3.0 question

    I have an early 2008 Mac Pro 3,1 (OS 10.6.8).
    I currently have a 1 TB Fantom Drive with USB 2.0 that I use for the Time Machine. I want to get the second external drive to use as a boot drive so I can install & boot from Mountain Lion to use Maya 2014 3D application software that requires the Mountain Lion OS. For all other applications, I want to stick with Snow Leopard (10.6.8), which works well for me.
    Most of the searches I've done for external drives have USB 3.0. Some have USB 3.0/2.0.
    Questions:
    1. Will one of the USB 3.0-only external drives work with my early 2008 Mac Pro 3,1, which is only equipped for USB 2.0? If so, would I need some sort of adapter? (I realize that the speed would still be USB 2.0 speed.)
    2. Or do I need to get the USB 3.0/2.0 external drive (which is more expensive)? I am assuming this would not require any adapter.
    3. Will I be able to boot from the external drive with Mountain Lion?
    Thanks for any help with this.
    S

    First, many thanks to both Grant Bennet-Alder and The hatter for their fast responses to my questions. I really appreciate this information. Based on your suggestions I did some research in order to better understand the proposed solutions.
    Grant Bennet-Alder wrote:
    You can add a PCIe card to get these interfaces:
    eSATA
    USB-3
    1. Does one need to get a separate PCIe card for each interface, or is there one PCIe card for multiple interfaces?
    The hatter wrote:
    Installing or cloning OS X should be done on SATA II drive bay or external and then moved to the PCIe - depends what card you buy, and some issues are with arrays (no need for system on one).
    2. I went to http://www.everymac.com/systems/apple/mac_pro/faq/, which says, "By default, a single 3 Gb/s Serial ATA -- sometimes referred to as SATA 2.0 or SATA II -- hard drive is installed in the first of four bays for all models." I interpret that to mean that SATA II is a in the first bay located on my internal hard drive. Can I create a partition here and install Mountain Lion as a separate system, and then move it to a PCIe SSD?
    3. Or, can I install it on my external Falcon Drive (which has a Partition Map Scheme : GUID Partition Table, and which, I believe means it is not a bootable drive). Following that installation could I then move it to the PCIe SSD and boot Mountain Lion from there?
    4. Or, if partitioning is an option, can I just clone it to the Falcon Drive for backup?
    My apologies for my ignorance. This is not my forte. Thanks for any help you can give.

  • How can I use my external hard drive from PC to Mac without reformatting???

    Ok, so I am computer illiterate. I have always used PC's and have just bought a MacBook. When I plug in my external hard drive into my new Mac, it says it needs to be reformatted to use with Mac, which would cause all data to be erased. Is there anyway to get around this?
    Please help me!

    OK... as Woggledog indicated, OS X cannot write to NTFS formatted drives. NTFS is a proprietary Microsoft format. Conversely, Windows can neither read nor write to an OS X formatted drive.
    Both Windows and OS X can read and write to FAT32 (this is a fairly old format). The down side to FAT32 is that the largest file you can work with is 4GB. That is probably fine for most people... but if you're working with large files (videos, virtual drive images, large backup files, etc...) FAT32 is not suitable. There are applications that you can purchase for both Macs and Windows machines that will allow them to read and write to the other format.
    An immediate option provided you have the space on either your PC or Mac is to create a folder on either machine and move everything from your external drive into that folder. Then you can format the drive to FAT32 and then copy everything back over to the external drive (and delete it from your Mac or PC's internal drive). It might take some time depending on how much data you have... but you'll only have to do it once... and this is assuming you have enough space on one of you machines to copy the data from your external drive.

  • Using external hard drive for itunes from mac to windows

    Hello, I have an external hard drive for my itunes music connected to a G4. I just bought a laptop (windows) and would like to connect the external drive to it so it will read my music from the external hard drive. How can i do that?
    Thanks,
    M

    You will lose all data when you reformat so you must copy it elsewhere temporarily, as for the format go to: Applications>Utilities>Disk Utility>Erase, in the format dropdown select MSDOS (FAT) and in the name dropdown, type a name.
    Copy your data back to it and it will be accessible to windows and osx

  • External hard drive for pc and mac

    How can I format my external hard drive to use it with both my pc and mac without deleting everything that's already on it?

    No. The process of reformatting the drive wipes out all data on the disk drive.
    Allan

  • External boot drive for current MBA

    Hello,
    Can anybody please tell me, if it is possible to create a bootable and usable external hardrive system for a mid 2011 MBA using Snow Leopard? I tried connecting an earlier boot drive and although the MBA recognised it as a removable drive, it did not show up in the Startup Drive option app in system setup.
    Thanks,

    Depending on how old the "earlier boot drive" and the OSX on it is, it might be too ld for your MBA to boot from it.
    Easiest way is to repartition/erase that older boot drive and use either SuperDuper or Carbon Copy Cloner to make a full bootable clone of your internal OSX to the external harddisk.
    Stefan

  • Can i get an external disk drive for my MacBook 5,1

    My disk drive on my MacBook 5,1 (model #A1278) is bust. It will not accept a dvd/cd at all, it won't let it in...not an inch!  seems like it's stuck in eject? as if there is a disk inside but as far as i know there is not.  Nothing i have tried makes any difference.  So i am wondering if i can buy an external disk drive, but this info is not obvious to me on the Apple Store website!

    Probably pretty much any one would as long as it can be connected to your Macbook with USB or Firewire or what it has.  Read the fine print when it refers to system requirements.  In most cases that refers to bundled software which you probably don't need.  Usually if there's OS limits for Macs it's something like you must be running OSX 10.2 or newer.
    I would start looking on a site such as www.mac-sales.com which caters for Mac users so you can be assured their stuff is compatible.  You can get something pre-assembled or you can buy an enclosure and a drive separately and assemble them yourself.  My preference would be for one where the drive is powered independently, though that does tie you down to an outlet.  On the other hand with an external drive you're not going to be walking around the room.
    I guess one Mac compatibiltiy issue would be if the drive is bootable.  Not all third party drives can boot your Mac should the need arise.  I'm not so familiar with Macbooks that I am up to date on this and this might be one thing you could ask the vendor (and a reason for going with a vendor who knows Macs).

Maybe you are looking for

  • Cover Art Problems with iTunes Library on a NAS

    I have my iTunes library stored on a Synology NAS.  I use a networked Mac Mini as a dedicated iTunes player, I set it up so the Mac Mini finds my iTunes library on the NAS.  The cover art for all of my movies that I ripped from my home DVD collection

  • Combo box vs Dropdown list

    The Java Studio Creator (2004Q2, Update 8) help screen says that �Dropdown lists are the same as combo boxes in Swing and Microsoft Windows.� According to a SUN Java Swing web page, �Combo boxes require little screen space, and their editable (text f

  • Change how many % does the up/down volume button jump

    Hello! I know that this question isn't very important nor many people have thought of that issue.. but I find it a little bit irretating. So..my question is : Are there settings (if yes - where are located) for adjusting how many bars does the volume

  • Using external classes inside an EBJ

    Hi! Here's a simple question about EJB's: I have an EAR file containing a WAR file (WEB-INF/lib, WEB-INF/classes, and all that stuff), and a JAR file. The JAR file contains a MDB. A simple scenary, isn't it? Well, my MDB uses classes contained in the

  • Technology migration and Project setup quick advice

    I'm working with a JDeveloper 10g Application Web application that uses the following technologies: JSF Oracle ADF Facelets Hibernate Bear with me, I'm fairly new to ADF and Jdeveloper. What is the best way to make a new project for this and migrate