Can i create report using more than one Business Area ?

Hi Gurus,
Can i create report using more than one Business Area?.Could anybody tell me that report will work?.
Vikram

You should have no problem creating a report using more than one Business Area, we share folders across BAs all the time for ease of management. As long as your joins exist its not a problem.
Matt Topper
TUSC, The Oracle Experts
[email protected]

Similar Messages

Can I create and use more than one repository on OVM 2.1.5

The version of Oracle VM I am using is 2.1.5 .
I wonder can I create and use more than one repository on OVM 2.1.5. Because I want to install different GOS on different disks.
I know in Oracle VM 2.2 we can use following commands to realize that.
a. #/opt/ovs-agent-2.3/utils/repos.py –n /dev/mapper/mpathxp1
b. #/opt/ovs-agent-2.3/utils/repos.py –r UUID
c. #/opt/ovs-agent-2.3/utils/repos.py –i
And other repositories can also be mounted and found under /var/ovs/mount/UUID.
But in Oracle VM 2.1.5, seems just one repository can be created and mounted. For example:
At first, I create a repository using mpath1p1:
a. # mkfs.ocfs2 /dev/mapper/mpath1p1
b. #/usr/lib/ovs/ovs-makerepo /dev/mapper/mpath1p1 C "cluster root"
c. I can find the repository has been mounted under /OVS.
But if I want to use "/usr/lib/ovs/ovs-makerepo /dev/mapper/mpath2p1 C "cluster root" to create another repository, and check the mount status using command "mount", these two disks are all have been mounted under /OVS.
"# cat /etc/ovs/repositories", only mpath1p1 with UUID was recorded there.
After reboot, only repository with mpath1p1 was mounted under OVS.
Can anyone tell me how to use more than one repositories on OVM 2.1.5. Do I have to install all the GOSs on the same disk and repository.
Thank you very much.

Now I've known how to create different repository. They will be mounted under /OVS/UUID. Thanks.

Using more than one Business area in the same report

Hi,
Is it possible / recommended to use more than one business area in the same report.
For example, I have a sales (business area sales) report on one tab and a rebates(rebates business area) report on a second tab.
Thanks

Hello
Possible: yes
Recommended: no
This can certainly be done and Discoverer will not prevent you from having reports that use different business areas as you describe.
However, for management and security purposes it does not make for ease of use. As you know a user has the ability to share a workbook with another user. If they do this then ALL reports within that workbook are shared. If the receiving user does not have access to one or more of the business areas then some reports will run and some will not. This can be very confusing to an end user and a possible nightmare to administer.
My recommendation would be to have a workbook per business area and not mix.
If there is more than one business area per functional area, for example sales and returns, then so long as the users have access to both business areas then you could use a common workbook.
Personally I would not even do this, so my strongest advice would be to have all reports in a workbook written against the same business area.
Hope this helps
Michael

Can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0

can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0 or Iphone 4s or Ipad 2?

You can only connect to one device at a time using Bluetooth, See article below for more information.
http://support.apple.com/kb/ht1664
While your iOS device can maintain multiple pairing records, it can only connect to one headset or hands-free device at a time. This prevents your iOS device from sending your data to the wrong Bluetooth accessory.

Can an assigned PO use more than one work order?

Can an assigned PO use more than one work order?

Hi,
Please avoid duplicate posting in the forum. You already an active thread which is in progress. there is possibility that Moderators might lock your threads.
Thanks,
Sudhakar
Message was edited by: Sudhakar Pappu
Next time please mark for moderation so duplicates can be removed - thanks I have locked this thread
Regards
Virendra
Message was edited by: Virendra Pal

Creation of prompt section using more than one sunject areas.

Hi Everybody,
Can we create prompt section in the dashbaord using more than one subject area?. I am using OBIEE 11g
Please put your thoughts/suggestions.
Thanks,
Govardhana

Hi Govardhana,
Do you want to create same dashboard prompt using multiple SA's ?
How to reuse Filters/Dashboard Prompts from one Subject Area to another?
Thanks,
Saichand.v

Can't search photos using more than one word. Ruined ability to data base

I've spent hundreds of hours cataloging my photos by keywords and image titles and created a data base that is critical to my business. After installing iPhoto 11 I can no longer search using multiple words. This has made my data base useless. The "Faces" and "Places" fields will not help because those are not part of the search criteria. Is there a way to make this work? If not how do I go back to the old version of iPhoto?
thanks for your help!

How were you searching previously? Adding both keywords and title text to the search box? Why can't a smart album do the trick?
You might consider using a DAM (digital asset management) application like Expression Media. It's a professional grade image management app that can be searched for any combination of keywords, description text, title text, etc.
Click to view full size
You can learn about EM and the other pro DAM apps at the The DAM Forum. I strongly suggest you consider a more robust DAM app for your professional work.

Reporting from more than one infocube and also from multiple ODS

Hi all,
Someone please help me in these issues.
How can we do reporting from more than one cube ( if data in all the cubes are required, but only a few fields from each cube). And how to do the same with more than one ODS.
Thanks in advance,
Sekhar

Hi Sekahr
Can u jus create a multiprovider.
Before creating the multiprovider..Just check the Common charcterstics avilable in
all the ods based on that give the mapping ..
and then once u have completd the creation of multiprovider execute the same in
the tcode <b>Listcube</b> and then create the querys as per the user thats it...
Regards
R M K
Assining points is the only way of saying thanx in SDN ***

Can I use more than one transition when creating a slideshow in IDVD

I want to use more than one transition in IDVD when creating a slideshow, is this possible?

Not so. Under Windows select Photos.
That will show the Media Browser in the lower right hand corner of iMovie.
Use the File ➙ New Project to create a new project. Select the photos from iPhoto you want to create a movie from and drag into the new project area.
From there add your transitions, music, etc.

I keep my library on an external hard drive 4TB. It's full. Can I use more than one hard drive to keep my library on?

I keep my iTunes library on an external hard drive 4TB. It's full. Can I use more than one hard drive to keep my library on? Like two 4TB next to each other.

Create a concatenated disk set
Increase storage space with a concatenated RAID set (also called “Just a Bunch of Disks” or JBOD). If you need one large disk, but you have only several smaller disks, you can create a concatenated disk set to use several small disks as one large disk.
Open Disk Utility, in the Utilities folder in Launchpad.
Select one of the disks that you want in the set, and then click RAID.
Click Add (+), and type a name for the RAID set.
Choose a format from the Format pop-up menu. Usually you’ll choose the Mac OS Extended (Journaled) format.
Choose Concatenated Disk Set from the RAID Type pop-up menu.
Drag the disks you want to add to the set to the list on the right.
Click Create.
Exerpt from:
Disk Utility 12.x: Create a RAID set - Apple - Support
Note that the biggest CON to concatenated RAID configurations is vulnerability to volume failure. If either disk fails, the whole volume fails. If you choose this option, I would highly recommend backing up your music to a cloud service. There are very cheap per GB/storage, and some of the most reputable actually offer unlimited storage:
Five Best Cloud Storage Providers - Lifehacker

Cant use more than one authorization group per report with SBO CR Basic

Cant use more than one authorization group per report with SBO CR Basic.
I have installed on SAP Business One SBO 2007 SP00 PL49 the Crystal Reports Basic 2.0.0.7.
i have defined two users, manager and supervisor.
I have defined two groups, M and S.
Manager belongs in managers (M), and supervisor is assigned to the supervisors (S).
i enter to one report, disable the public option to enable group authorization, and then check M group.
Manager can see the report, but Supervisor is not allowed. So far good.
Then i uncheck M, then check S in the report properties, and Manager cant get in, supervisor opens the report, So far good.
But when we check both Groups or more, only the M group authorization appears to work, and S group users cant acess, even the report is allowed for that group, also happens with all the groups appart the first (2nd, 3rd, 4th, etc.).
It seems that a report can manage a single group, but i have to be shure to tell this to the customer.
So far we have included all Manager users to the S group in order that only S group is used and authorized users can use, but this is duplicating user participation in groups, and it would be much easier to check the desired groups for a single report.

Cant use more than one authorization group per report with SBO CR Basic.
I have installed on SAP Business One SBO 2007 SP00 PL49 the Crystal Reports Basic 2.0.0.7.
i have defined two users, manager and supervisor.
I have defined two groups, M and S.
Manager belongs in managers (M), and supervisor is assigned to the supervisors (S).
i enter to one report, disable the public option to enable group authorization, and then check M group.
Manager can see the report, but Supervisor is not allowed. So far good.
Then i uncheck M, then check S in the report properties, and Manager cant get in, supervisor opens the report, So far good.
But when we check both Groups or more, only the M group authorization appears to work, and S group users cant acess, even the report is allowed for that group, also happens with all the groups appart the first (2nd, 3rd, 4th, etc.).
It seems that a report can manage a single group, but i have to be shure to tell this to the customer.
So far we have included all Manager users to the S group in order that only S group is used and authorized users can use, but this is duplicating user participation in groups, and it would be much easier to check the desired groups for a single report.

How can I use more than one Data Provider in my web Apps

I am trying to use two different data provider in my web apps to run two different queries from the same table ,the data provider A is working correctly but when I attempt to run data provider B ,It display an error page ,here is the error message : Exception Details :javax.servlet.ServletEx ception
java.lang.RuntimeException: java.sql.SQLException : Cannot connect .Both dataSourceName and url properties are null.

Hi,
You can use more than one data provider in your application. However if you have defined a dataprovider for a particular table already, and wish to bind a component, select the component and use its context menu to Bind to Data...

Can I use more than one Apple ID on one device

I have seen some answers to this type of question before but not that since the ios 6 so will ask again. My household shares an Apple ID and it has worked great as we have added devices and purchased apps. My problem now is this, we have hit a point where I have work things on my iPad and iPhone that I really don't need to be shared with the whole family but it isn't a major deal or security risk. I don't want to give up the advantages of having the household ID. Is there an easy way to have another ID on my iPad and switch between them without having major complications? I am for the most part a techie so not afraid of these kind of things but I can't afford to lose everything right now and take the time to set it all back up so getting advice here. Thanks in advance for any help you can give.

You can use more than one apple id, but keep in mind that when apps need updating that you'll will need to sign in with correct credentials to update them.
Share an apple id for the itunes and app stores, but keep your own for icloud, facetime and messages.
Managing and Sharing multiple id's with your family
http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/

Can I use more than one song in a slideshow?

Can I use more than one song in a slideshow? If so, how? Thank you

Dear Barbara B.
Thank you for your response. Good idea about combining the songs in another program first.
Thank you for your time and thoughts.

Can I use more than one SIM card in my iPhone if I buy it SIM free?

Can I use more than one SIM card in my iPhone if I buy it SIM free?

Sim free is not enough, you can use different sim if it's unlock.

Can i create report using more than one Business Area ?

Similar Messages

Maybe you are looking for