Can i development program with EDK for uploading file to server?

Can I development program with EDK for uploading file to server?How to avoid same name of files?
Thanks!

Hi ,
thanks for the quick response.
but the problem is supppose i have a excel sheet with 16 rows and 13 columns(so data).
i am placing this file contents to appserver USING ABOVE fm.
after that i am reading the file from appserver to create SO(idoc),i need  1row-3column data and 2row-2c data.like that.
in unix we will get row data(after uploading to app server) as #mprn#2345# like this so easy to separate when reading.but in  MS NT OS 1row data getting stored in different rows in Appserver.so difficult to read.
so the above mentioned FM is OS dependent or is there any way (any other FM) to get same kind of data in different OS.
PLEASE SUGGEST OTHER WISE I NEED TO CODE BASED ON OS.
REGARDS
SARATH

Similar Messages

  • IPhone Developer Program with two brand

    Hi
    i need to subscribe to iPhone Developer Program with two different company but with only one Apple id for example:
    [email protected] is a developer that works and publich application for company A and company B.
    Is it possible to buy with the same Apple id two enrollment?
    thanks in advance.

    Yes. Your Apple ID can be linked to more than one iPhone Developer account. If it is, then the website will prompt you to choose which one you want to sign in to when you enter your Apple ID and password.

  • Can anyone help me with advice for a replacement hard drive

    Hi there,
    Can anyone help me with advice for a replacement hard drive and RAM upgrade for my Mac Book Pro 5,3
    Its 3 years old & running Snow Leopard 10.6.8
    I do a lot of audio & movie work so performance is important.
    The logic board was replaced last summer & I was advised to replace the hard drive then...oops
    Anyway it has limped on until now but is giving me cause for concern...
    I have found a couple of possibilities below...so if anyone does have a moment to take a look & help me out I would be most grateful
    http://www.amazon.co.uk/Western-Digital-Scorpio-7200rpm-Internal/dp/B004I9J5OG/r ef=sr_1_1?ie=UTF8&qid=1356787585&sr=8-1
    http://www.amazon.co.uk/Kingston-Technology-Apple-8GB-Kit/dp/B001PS9UKW/ref=pd_s im_computers_5
    Kind regards
    Nick

    Thanks guys that is so helpful :-)
    I will follow your advice Ogelthorpe & see how I get on with the job!!! Virgin territory for me so I may well shout for help once my MBP is in bits!! Is there a guide for duffers for this job anywhere??
    & yes in an ideal world I would be replacing my old MBP but I'm just not in a position to do that at the moment....let's hope things pick up in 2013
    All the very best
    Nick

  • Why can't i pay with ideal for my skypenumber? and...

    why can't i pay with ideal for my skypenumber? and without notifications up front!
    number

    Hi ronhermes,
    I hope you're having a lovely vacation!
    I think it may just be a matter of completing your our purchase through the US Adobe Store (not the Adobe Store in Greece). For more information, see "Are there any workarounds?" in this document.
    Best,
    Sara

  • Can't get duplex print option for pdf files using  Adobe ReaderXI 11.0.04, Mac 10.8.5 with HP8600

    I get two-sided option for normal printing, but
    I can't get duplex print option for pdf files using  Adobe ReaderXI 11.0.04, Mac 10.8.5 with HP Officejet Pro 8600.  HP says it's an Adobe problem. I'm stuck.
    Thanks in advance.
    VO

    It depends where the pdf is located. If in the Finder or in an attachment to
    an email in Entourage, the message is ³You can¹t open the application
    ³Acrobat Reader 5.0² because PowerPC applications are no longer supported².
    If an attachment in an email that has come via Safari, the message is
    ³Safari can¹t open the file because no available applications can open it².
    In each case the menu bar is Finder or Entourage or Safari as the case may
    be.

  • Trying to print a book with Aperture 2.1.4, everything went well until the final step "uploading files to server" -- it's been spinning for an hour, "status" still reads 0%, "pause task" and "cancel task" buttons are grayed out in Activity window.

    everything went well until the final step "uploading files to server" -- it's been spinning for an hour, "status" still reads 0%, "pause task" and "cancel task" buttons are grayed out in Activity window. Any ideas?

    everything went well until the final step "uploading files to server" -- it's been spinning for an hour, "status" still reads 0%, "pause task" and "cancel task" buttons are grayed out in Activity window. Any ideas?

  • Dreamweaver CC and Windows 8.1 - Can't Find A Valid Editor For This File Extension

    Was running the latest version with no issues and then I loaded Office 2013 .. Now when I am in the remote site and try to double click on a .cfm file, I get a dialog box..Can't Find A Valid Editor For This File Extension..
    I tried the support chat and they said Dreamweaver support was not available, try again later???
    So I thought I would reinstall the CC version and now I can see the Dreamweaver icon next to the files but still ... can't open the file..
    Any assistance would be appreciated?
    Leo

    The issue is only in Windows 8.x where when Dreamweaver CC is installed, it is not able to turn on the file type associations by default.  The workaround for now is to manually add the extensions both within Windows and then within Dreamweaver CC itself.
    Go to Control Panel > Programs > Default Programs > Set Your Default Programs and select Dreamweaver CC and then select 'Choose defaults for this program' and Select All or the extensions you want to open in Dreamweaver CC
    Start Dreamweaver CC and go to Edit > Preferences > File Types/Editors and add '.cfm .cfc' to the extensions and then add C:\Program Files (x86)\Dreamweaver CC\Dreamweaver.exe then click on Apply and Close
    That should be it.
    James

  • No sync with audio for input files AVI MPEG4 23.976 fps

    No sync with audio for input files AVI MPEG4 23.976 fps.
    If i open in Premiere Pro CC any file AVI MPEG4 23.976 fps (with internal audio MP3 or AC3) i got growing out of sync from start to end of file, even while play it at internal media player of Premiere Pro CC for source file.
    Using external audio files AC3 or MP3 not help.
    In properties of source file i see 23.97 fps instead of 23.976 fps, and time of internal file is wrong.
    If i try Clip > Modify > Interpreter Footage > custom settings to 23.976 time i see right time, but when i click "OK", custom fps saved as 23.98 fps instead of 23.976 fps and time of source goes wrong again.
    So i always get bad sync such files in Premiere Pro CC while play or export them.
    But in all media players, other editors, and in PluralEyes sync OK with all such files.
    If i open M2TS or MP4 (H264 23.976 fps) source file, all OK, it it shows as 23.976 fps, time is right, and sync OK.
    So i want to add automatic detection 23.976 fps instead of 23.97 fps for source AVI files with 23.976 fps.
    Is it possible?

    Yes, i know what XviD and DivX does not edit well in Premiere Pro. And because of that i create this topic "No sync with audio for input files AVI MPEG4 23.976 fps" and was hoping to get help in solving the problem, rather than stating that the problem really is.
    XviD and DivX it is MPEG4.
    Xvid (formerly "XviD") is a video codec library following the MPEG-4 standard, specifically MPEG-4 Part 2 Advanced Simple Profile (ASP).
    http://en.wikipedia.org/wiki/Xvid
    I have many old useful materials in XviD and DivX formats, and have no other formats versions for that material.
    XviD and DivX are very compact formats to store video at acceptable quality and it is fully compatible with all players and editors for PC except Premiere Pro.
    You suggest to convert them to another format (DV) to make compatible with Premiere Pro... It is not what i want.
    Let me explaine:
    1) Size of files
    uploaded AVI XviD 1280x720 file with very good quality have size 1.9Gb (with audio AC3 2.0). If i convert it via VirtualDub from "AVI XviD" to AVI DVCPRO HD 1280x720 (without audio) it have size 35Gb, and quality is worst than at XviD-HD, and also converting take much time.
    2) Compatibility with AC3 and MP3 audio inside AVI
    AVI DV / AVI DVCPRO not compatible with AC3 and MP3 audio inside, only with PCM
    http://en.wikipedia.org/wiki/DV
    AVI XviD and DivX can use AC3, MP3, OGG audio without any problems.
    Size of 1Hour 30Min "AC3 Stereo 48kHz 16bit 384Kbps" file is 257Mb
    Size of 1Hour 30Min "PCM Stereo 48kHz 16bit" file is 1030Mb
    3) I have and use hardware H264 encoder card "Matrox CompressHD" for export my material
    http://www.matrox.com/video/en/products/compresshd/specs/
    This card works only from Adobe Premiere Pro, so i can not use it from VirtualDub or other editing software.
    So i need a full compatibility Adobe Premiere Pro with all popular standard formats of input files.
    Here we see:
    http://www.adobe.com/products/premiere/extend.html#Supportedvideoformats
    Supported video formats:
    "Adobe Premiere Pro CC leads the industry with incredible, thorough native media support, meaning you can edit virtually all of the major video, image, and audio formats natively without waiting."
    As most PC users knows, AVI XviD it is a very popular free video format, and would be very useful if Adobe will make normal compatibility with that format in Premiere Pro.

  • Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

    Fresh installation of Exchange Server 2013 on Windows Server 2012.
    Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
    your folders with your Outlook data file (.ost)" is displayed.
    If I turn off cached Exchange mode, setting the email account to not
    cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
    time.
    I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
    Microsoft Exchange RPC Client Access service is running.
    No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
    Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

    So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
    Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
    First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
    Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
    This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
    work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
    In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
    up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
    like OutlookAnywhere - which I might add had their place under that scenario.
    In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
    previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
    EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
    So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
    but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
    users.
    Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
    Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
    certificate.
    See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
    So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
    Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
    always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
    This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
    there is a 3rd - I forgot, but you get the idea).
    Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
    the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
    Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
    NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
    Open Outlook - BOOM! It works... Was it as good for you as it was for me?
    You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
    and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
    So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
    Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
    So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
    SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
    Frustrating beyond reason - that should be Exchange's new slogan...
    Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
    PS
    ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

  • Automation Question: How do I work with an open 'upload file' dialog?

    Preamble:
    Was a very experienced VBS automation guy, this is my first emersion into the wonderful world of C# automation. Using Selenium WebDiver, I have successfully logged into a web page, filled out a few web forms, clicked on the 'add image' button and am
    now faced with an open 'upload file' dialog. Pretty sure the namespace I need is system.windows.forms.OpenFileDialog so added the reference to my project.
    Question:
    All the examples on the web seem to relate to app development and not test automation. But, I need to automate this web application and all that's left is the image upload. What do I do when faced with an
    already opened 'upload file' dialog? I know the image and path, how do I automate the process of placing the full path into the dialog and clicking the OK button or alternately, enter key?
    Thank you!

    I doubt that you need System.Windows.Forms.OpenFileDialog, the browser isn't written using WinForms and that dialog is a Win32 native dialog.
    Maybe you should post this in the Selenium Users
    group? It has little to do with C#, it's more about how Selenium interacts with the browser.

  • Is there a size limit for uploading files?

    is there a size limit for uploading files?

    You have max 20GB storage.
    Upload anything you want up to that limit - be it one file or many.
    The only limit after that is the speed of your internet connection since extremely large files can take hours to upload.

  • DW CC: Can't find a valid editor for this file extension

    Hi,
    I am using dreamweaver cc for 1 month now. I have been having difficulty opening .asp file.
    In the File panel, when i click on one of the asp files, the error message is 'Can't find a valid editor for this file extension'.
    To solve this problem, I will right click on the file and choose Open with > Dreamweaver.
    However, this is very inconvenient. Someone pls help!

    You can configure that in your Operating System.  In my version of Windows XP, open any folder and  select TOOLS/FOLDER OPTIONS/FILE TYPES then scroll to the asp file type and select DW as the editor.

  • Can't find a valid editor for this file extension

    When I try to open access from within Dreamweaver I get this
    error message.
    Can't find a valid extension for this file extension
    I have MSACCESS showing in Edit > Preferences > File
    Types Editors
    Many Thanks for any help
    John

    Support for ColdFusion and other databases were removed from DWCC. You can add them back with the Legacy Extension, or adding a paid extension from DMX Zone...
    About 1/2 way down this page for the legacy extension: http://blogs.adobe.com/dreamweaver/
    It's a paid extension, but adds back a lot of the things that were removed...
    http://www.dmxzone.com/go/22072/dmxzone-database-connector-php

  • Numbers 09 not working - I can open the program but only a few files are available, missing blank, checklist and many others. e.g  when I click on a file I get this error: The document "nmbtemplate is invalid. The index.xml file is missing. help.

    Please let me know what I can do to get my Numbers (iWork 09) working properly again.
    Here is what is going on:
    Numbers in iWork 09 not working can't access Blank, Checklist and many other files within Numbers.   I can open the program but only a few files are available. When I click on the file (which also has no icon just the name of the file) this warning appears:
    The document "Blank.nmbtemplate" is invalid.  The index.xml file is missing.
    I recently had to get a new hard drive installed and had the system upgraded and more memory put in by a Mac certified specialist recommended to me from the Apple store in Northbrook because this was the 3rd time my drive went bad but this time it was to old (I got the IMAC- in 2007) and the Apple store could no longer work on it this time so they recommended a few places that had certified Mac specialists.  Since then Numbers is not working right.
    I'm sure it's something simple to fix, but I've tried re installing it and that didn't work.  Appreciate any help.
    Thanks
    AppMare

    There is one way its getting fixed. Once I update my Adobe Illustrator CC to Adobe Illustrator CC 2014 it is further allowing me to go into the system folder and allocate the font to the file so that it can replace it. My only concern now is that our MAC partners who will receive these files back from us have Adobe CS6. We will down save it to CS6 but I hope they won't experience any font issues because of us using CC 2014? Any light you can shed on this?

  • PDF SCANS ERROR MESSAGE: CAN'T "OPEN THE DEFAULT APP FOR THIS FILE TYPE" EG. PDF

    OFFICEJET PRO 8600 PLUS , WIN 7, SCAN TO COMPUTER AS A PDF FILE.  ERROR MESSAGE: "
     CAN'T "OPEN THE DEFAULT APP FOR THIS FILE TYPE" EG. PDF

    Hi @reddog2,
    I would contact HP Cloud Services for assistance. Call 1-855-785-2777.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for