Can I edit on a ProRes timeline containing XDCAM EX footage and DVCPRO?

I have a documentary project of which the majority was shot with the EX-1 at 1080 24p and I have been editing that footage contained in a 1080 24p ProRes (standard quality) timeline. We have some extra interviews that were shot with a Panasonic Varicam at same frame rate and resolution. Will I be able to drag the DVCPRO HD files directly into the ProRes timeline and edit with it and the EX-1 footage?
I assume that whatever footage I insert into the ProRes timeline is being converted to ProRes on the fly. This has worked well with the EX-1 footage. Not sure how it will be with the DVCPRO HD footage...will it be too taxing on the CPU? If it was, I think my fallback option would be to transcode all the DVCPRO HD footage to ProRes using Compressor...and then pull it into the timeline.
If anyone has had experience with this, I would very much like to hear your comments.
Thanks, John

HI Tom, thanks for the reply, I was afraid of that, I did not know you could do limited trimming in the QT PLayer, this might just help me out
Regards
Mark

Similar Messages

Can i edit my game center account to stop sharing friends and games from another apple id that associated with my own new apple id.how to reset it without losing my apple id and i can stiil use it?

Can i edit my game center account to stop sharing friends and games from another apple id that associated with my own new apple id.how to reset it without losing my apple id and i can stiil use it? Because i've made lot of paid purchases using this apple id. In my game center account i have so many games data that i'd never installed.i wanna stop sharing friends and games with this xxx apple id in my old ipad version ios 4.2. and i can still keep using this apple id in my new ipad 3rd gen version ios 6 without sharing game and friends with this xxx apple id? and how to remove the games data that i never downloaded in my ipad but still registered at my game center account.i wanna keep using this apple id coz so many fav application i've purchased from this id. the answer as soon as possible if there is some one can help me to solve it.thank u for reading my question and very big thanks for anyone who can give me a helpful answer.

Why do you ask in the iWeb forum?

Bug: when you have two or more reminder pop-ups on BB10, you can't edit 2 or more of them because the second and beyond are lost...

I notice that when you have two or more reminder pop-ups on BB10 (tasks, calendar, etc.), you can't edit 2 or more of these because the second and beyond get lost and will never pop-up again.

Hey JVanB,
Thank you for your feedback.
To better understand your issue, for example If you have two reminders and select 'View Event Details' on the 1st reminder, does the 2st reminder popup before the Details of the1st reminder displays?
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How can I edit the way autodiscover.xml behaves in SBS 2008 and 2011?

I have autodiscover working correctly on a few SBS 2008 and SBS 2011 servers. But, its doing its usual misbehaving. When setting up a new Outlook profile, the user enters their email address and password. Autodiscover is successful in creating all
the account settings, but at the end of the wizard a username and password window pops up with the users full email address incorrectly filled in as the username, which is why it didn't work.
This has always been so annoying about SBS. The user then has to be told to delete their email address in the username field, then fill in "domain\username" instead. Only then is the authentication successful.
I've read lots about people adding the external domain UPN Suffix to ADD&T, then manually changing ever users login to domain.com instead of domain.local.   Then you have to mess with the owa authentication settings in exchange to accept the
UPN.   Its all too ridiculous. There must be a simpler way.
I have read about how you can control how the autodiscover.xml behaves, and there are examples of how to do it in this document:
https://docs.google.com/viewer?a=v&q=cache:0jap1FNKgV0J:https://support.quest.com/Shared/Images/SOL51188_Outlook%2520Automatic%2520Account%2520Configuration.doc+&hl=pl&gl=pl&pid=bl&srcid=ADGEESjizUeFf-JYaM7ZdfIgUCKMMXtcCl0Y3pknFbuwd64GNHIEP1K8a_mpg2YIEisP6sz5DzbtVtdW4Pc42PE0Kjd6bz-3vXz0iaQm7FKi0AnwgvFG_41ZAkBLWynaJtf8s8xyi_d2&sig=AHIEtbSie1mEHTn8el4DPquNxrpovwknUQ
The document above shows the settings we need to change. It looks like we can add the local domain using DomainName into the autodiscover.xml and this will stop autodiscover reporting that the full email address is required.  So we
should be able to get autodiscover to populate the username pop-up with with "domain\user" automatically.
OK, so my question is, how on earth do I edit these settings in SBS 2011? I can't find any articles that talk about how to edit autodiscover.
If I could just edit this one setting (that Microsoft should have correctly configured in the first place) autodiscover will work perfectly for all existing users and all future users, without having to do anything.

Just to straighten out a few things;
1) This is NOT a bug, rather by design. Not every active directory has an exchange server in place, and MS is assuming you don't want to give your internal domain name out to people (which is why it doesn't default to domain\username)
2) Going on what I said in 1), this is NOT SBS specific this is the same way with every Active Directory/Exchange install, keep in mind Microsoft did NOT specially design the software for SBS, they just bundled it into a supported configuration in a neat
little package -since the Exchange server we run on SBS is the same Exchange server powering hundreds of hosted email providers -it makes sense why autodiscover doesn't provide the domain\username (imagine what a mess that would be!)
3) I understand it's a little bit time consuming but it can actually be done for all users in a matter of seconds, select all users, right click and go to Properties, you can then choose the UPN Suffix for all users. When a new user gets created one of the
settings in the wizard is the UPN suffix and is easily changeable as long as you notate for the person creating the user to do it. (The problem here is if you're using the SBS Console instead of AD to setup the User in which case that's just an oversight
in design not a bug in the programming)
4) You can most certainly have a powershell script that changes the UPN suffix from A to B, let me know if you're interested I'll dig one up for you. That can be run on a scheduled task and will solve the remaining issues you have :)
I do see you mentioned it in number 3, I must have missed since I didn't re-read the OP before posting the article, however I just tested on several SBS 2011 machines and OWA authentication settings don't have to be changed at all, this worked immediately
for Outlook Anywhere and Outlook Web Access in my lab and two different customer production systems.
-GreenlightTech

How can I edit an InDesign file that contains right-to-left text (arabic, hebrew...) with InDesign CC?

With previous CS versions, there was a special ME (middle east) version of InDesign that had all the necessary right-to-left functions. Is there a CC ME version, or is there another solution?

So this comes at no extra cost to the CC subscription?
Yes
And can it open older files that were created with Indesign CS5 ME for example?
Yes
Add to that you can also download and install indesign cs6 version
Download InDesign CS6 from CC
http://forums.adobe.com/message/5485418#5485418

Can I edit one project on two computers with external drive and two copies of software?

I have two copies of premiere elements. One on IMac and one on Macbook. Video files on external drive. I want to be able to edit same project on both. I originally started the project on macbook but IMac doesn't see the exsisting project. Can I do this? thanks for the help

jazziegirl
Thanks for the follow up.
The matter of the sign in/trial version has happened to me from time to time with Premiere Elements (I worked with Windows). I supply
the requested information and that usually takes care of that message for a long while.
What is the status of the issue now with the MacBook Pro to iMac projects? Is that matter restricted to just one project from MacBook Pro to iMac?
If so, on this particular one, did you try the Project Archiver/Copy Project workflow in MacBook Pro?
As for the error message...I am not a Mac user, and consequently I am not sure I am interpreting the following correctly. But take a look to see if any of it applies
Have you looked at the permissions on your file?
USB tethering lost after installing iphone conf... | Apple Support Communities
iTunes 11.4 - All Things Apple | DSLReports Forums
"System extension cannot be used -- The system ... | VMware Communities
Please review and then let us know the outcome.
Thank you.
ATR

Can i have a central hard drive containing all my media and stream it to my devices when i wish from any internet connection?

I'm thinking of getting an ipad but due to having too many songs/movies etc I'm running out of space on my Macbook (250gb). I want to access all my music on my phone and ipad and macbook from any internet connection... Is there a way of doing this?

You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.
Non purchased movies such as home video can't be uploaded to iCloud and would require a third party cloud storage solution.

Can you edit/change an image to show depth in pages and or keynote?

does anyone know how to make an image have depth ? for a better explanation of what i mean.... look at the image here (safe link)
http://www.xtorrentp2p.com/
on the right side of the screen the image of the application is rotated to show depth, anyone know how to do that in pages and or keynote ?
thanks.

I don't think apple has a way of doing this inside of its standard iwork programs or iLife. I use the free program Gimp, can't afford photoshop. You can load the image, then use the change perspective tool. then save it again.
Making it reflective afterwards may or may not work in keynote or pages. If you save it as a jpg or pdf, it will be saved in skewed form, but on a white background. Unless the programs recognize layers and let you keep a transparent layer in your image file when importing. which I am not positive about how to get to work. Maybe saving it as a Photoshop file. (which you can export from Gimp).
this might be the hard way, but i can't think of how to do it in Pages or keynote, if it is there then I haven't used it yet. Please anyone else confirm or clarify for me if I am wrong,
Jason

Editing a project with both True 16:9 footage and 4:3 footage w/ wide bars.

Hi everyone,
I have come across an interesting issue and really could use some suggestions here.
A friend and myself filmed a project using 1 Sony FX1 and a Panasonic DVX-100. Both of us set-up the DV footage to record as 16:9 widescreen thinking we would have the same look.
Once we captured the footage I realized that the Panasonic did not record true 16:9 aspect ratio, instead it recorded 4:3 and added the black bars on the top and bottom.
My issue now is seeing how the entire day the sony was the main camera in FCP I will set up the sequence with the DV NTSC Anamophic setting, but how can I now use the 4:3 (Panasonic) footage?
Can anyone suggest any ideas how I can use the 4:3 footage with blackbars in the 16:9 sequence and not make it look like there are is a sace on the side and top of the footage?
Thanks

I'd add here that you should be adjusting the SCALE the 4:3 footage...
wait...
IF the 4:3 footage comes in with the black on the side and the aspect ratio looks OK then scale it up to 133% or so. You'll loose a small bit of quality, but it won't matter too much and if you are going to colorize the footage you won't even be able to tell.
IF the 4:3 footage comes in looking squished -- everyone fat and short -- then you'll need to change each clip's aspect ratio to 33 or -33 I forget which and THEN scale it up.
You will loose the top and bottom, but one added plus is that you'll also be able to reframe your 4:3 shots up and down to get the right framing.
Good luck,
CaptM

Can't edit volume in timeline but can in Viewer?

Turned off waveform display, but can't edit volume in the timeline. The tracks are not locked. I have to select a sound clip and edit volume in the Viewer. I have not had this problem in the past?? Rich

Tom, Overlays - sorry I goofed I didn't have the overlay clicked on for the timeline. Thanks for reminding me to look at that! Rich

Can you edit 3D (side by side) in FCP X?

Can you edit 3D content from a panasonic camera? This uses side by side.
Thank you.

I think you're going to have to use Compressor 4 for direct custom output (sorry, I didn't buy in to Compressor 4 so can't advise from epxerience). As an alternative you can just Export an edit master using ProRes or some other suitable codec and then use Compressor 3, MPEG Streamclip or another app of your choice to create the custom H264 output.
Hope it helps
Andy

Why can't i drag clips to timeline?

I'm new.
Why can't i drag clips to timeline? I set in and out points but clips will not drag.

So it sounds like you're dragging from the source monitor and not from the project window. Either way, is it creating a new sequence for you when you drop it in over the blank timeline? If not what IS it doing? What version of pr are you using?

Can't edit play list names

Recently I upgraded to iTunes 10.2.2 (12).
Now I can't edit playlist names. I click on the name and it briefly changes to the editable background, but changes back too quickly for me to change anything. The whole thing is really flaky. Yesterday it was working OK.
I'm using OSX 10.5.8 on a Mac Mini.
Anybody else experienced this?

Well, this must have been an iCloud bug. I launched iTunes today and the changes I attempted to make yesterday all took. Editing my list today works very quickly.

How can I send an Imovie project so that person can also edit the video?

I'm trying to send a video to someone but they need to edit the video further. Is there any way I can send the imovie project so they can further edit it?

Which version of iMovie are you (and they) using?
Geoff.

Can not edit Pages files in Dropbox in my iPad

In Dropbox, in my iPad I can open files created in Pages in my laptop, but can't edit these using the iPad. Is this normal, and if so is there a workaround?
Thanks
NBK

There is no direct way to send files from Pages to Dropbox. Though what you can do is email the document to yourself, open your mail app and locate said email to yourself, tap to download the attachment, then tap and hold, select "open in..." and choose Dropbox. (note: for this to work the Dropbox app must be installed on your iPad)

Can I edit on a ProRes timeline containing XDCAM EX footage and DVCPRO?

Similar Messages

Maybe you are looking for