Can I get some help?

I'm doing some research for a project and I'm running up against a wall.
I need to track the position of a LinkElement and draw an image next to it. So far I've been able to find the y position of a link and draw an image next to it. But it's super buggy. First, you have to add about 7 or 8 links before the tracking will work correctly and then the tracking isn't very smooth.
Can anyone take a look at what I have and offer some suggestions?
I'm using TLF 447 and SDK 4.0.0.8031
If the file doesn't upload or takes too long it can be downloaded from here as well.
Thanks.

Hmmm did you try it a second time? Perhaps hold the power button down for 15 seconds.
Did you try restarting with just the power cord and no battery?
Hope you get the problem resolved.
Greg
PS It helps when your topic is more descriptive

Similar Messages

HT1414 when I do this steps thy give me a massege says " the iphone could not be restored . An unknown error accorred (3149) " . Can I get some help ?

when I do this steps thy give me a massege says " the iphone could not be restored . An unknown error accorred (3149) " . Can I get some help ?

Try using DFU/Recovery mode to restore
1. Plug iPhone 4 to computer
2. open iTunes
3. Turn off iPhone
4. Press home and power button for 10 seconds
5. Stop pressing the power. Button but keep pressing down the home button
iTunes should say the following; "iTunes won't be able to use your iPhone until you restore your device"
Then you'll have the option to restore and it should work, it has worked for me in the past

How can I get some help!!!!!

How can I get some help!!!

Since you waited so long at your other thread for an answer, check there.
https://discussions.apple.com/message/25113630#25113630

My HT BDV-N790W shows "needs network update" also my netflix doesnt load. can i get some help

My HT BDV-N790W shows "needs network update" also my netflix doesnt load. Can i get some help, please.

There's a lot there, so I'll start with the parts I can answer quickly.
The "ACL found but not expected..." messages can be safely ignored, so says this article
http://docs.info.apple.com/article.html?artnum=306925
(look below all the "SUID" examples)
I had changed my Desktop image earlier but when the "Installing 1 item" window came up it changed back to the back ground that you first see on your desktop after installation.
Leopard installs updates a bit differently. If it's simply an application that does not change system files, it installs them like before, without having to restart. If the update is to the system, then you must immediately "restart," It then goes to that stars and purple screen to perform the installation. Before, it would do the installation while you still had control of the Mac and would prompt you to restart when it finished the installation. This change probably make things more secure and reliable, because you aren't allowed to do other things on the Mac while system updates are being installed.
Please post back with the remaining point of concern.

How can i get some help to cancel my single app month to month and/or upgrade to full creative cloud membership? please don't tell me to follow the guidelines because i've tried several times but the options to 'switch plan' or cancel plan' are not availa

how can i get some help to cancel my single app month to month and/or upgrade to full creative cloud membership? please don't tell me to follow the guidelines because i've tried several times but the options to 'switch plan' or cancel plan' are not available on my screen

Keensy I have requested a member of our support team contact you directly via telephone. Once I was able to review the correct account it appears our support team has tried multiple times to contact you. I would recommend checking your SPAM filtering in case you need to receive additional messages from our support team.
I did request that you be contacted via telephone. I am sorry for all of the difficulties which you have faced.
For future viewers of this discussion when contacting our support team at Contact Customer Care it is imperative that you be logged in under the account tied to your membership/subscription. While there is cancelation options available you will have an increased chance of being offered an opportunity to contact our support team if your account entitlement can be verified. For this to be done you will need to be signed into the same account as your membership/subscription/registered software title.

Left side touch note working - took back up with PC companions - repaired with SUS - restore of contacts etc failed - restore error - touch still not working ..... Experts can i get some help ?

Hi Guys / Experts / Arnab,
The left side touch of my phone screen was not working. Was not able to type numbers 1, 2 and alphabets Q, W etc.
I repaired with SUS after taking back up with PC companion.
While restoring the backup, i got RESTORE ERROR, and almost everything got restore except few apps and CONTACTS, which is the most important thing in a mobile .
---> TOUCH IS STILL NOT WORKING <----
Guys can i expect some help here ?
Regards,
Sush
Solved!
Go to Solution.

I see
this might help
http://talk.sonymobile.com/message/448070#448070
https://github.com/nelenkov/android-backup-extractor
SO HERE IS HOW YOU CAN RESTORE YOUR DATA:
Get your Fullbackupdata-Contactfile.
1. First go to your backupfile: (C:\Users\YourUserName\Documents\Sony\Sony PC Companion\SomeNameDependsOnLanguage\
2. Make a Copy of your backup-File (crtl+c, crtl+v)
3. We want to change the file extension, so make sure you see it. If you don't see a .dbk at the end of your file, go in the explorer window in the left upper corner on organise -> Folder and search options. Change to view and then deselect "Hide extensions for known File types"
4. Rename (F2) the file to backup.zip
5. Open the zip with 7zip or something similar.
6. Navigate to Applications\com.sonyericsson.android.contactsimport and get the fullbackupdata file which is lying in this folder.
7. Put this file on your Desktop.
8.Download this jar-File: http://ge.tt/64TJmne/v/0?c
9. Put the .jarFile also on your desktop.
10. Doubleclick the .jar-File. After a few seconds a new file with the name "restore.tar" should show up (If not check if your fullbackupdata-File really has the name "fullbackupdata" and is on the desktop)
11. Open the .tarfile with 7Zip
12. Navigate to restore.tar\apps\com.sonyericsson.android.contactsimport\f\
13. Copy full_backup_vcard.vcf to the Desktop.
If everything worked you're finished, you can open this .vcf File via Windows-contacts -> import or put it directly on your phone and import it there (open Contacts. Settingsbutton -> impot)
If you don't trust my .jar file, you can also download the github-project follow their orders and compile it yourself.
Don't forget to mark the Correct Answers & Helpful Answers
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

I did all the following step to enable the dictation on my ipad3 but the icon is not showing on my keyboard. can I get some help

I did all the following step to enable the dictation on my ipad3 but the icon is not showing on my keyboard. can I get some help

Dictation is not available on the iPad 2 (your profile says iPad 2)

Can I get some help from a live person?

thelman81312280 I have followed the instructions for installing flash player 15 times and it is still not installed. How can I get a live person to help me

Hi Thelma,
The user forums are a peer-to-peer forum mainly used by users to help each other, while staff does participate, it is not our primary duty. As such, you can't possibly expect a response within 2 minutes of posting in the forums. In addition, Flash Player is a free product and Adobe does not provide support via any other channel.
With that said, you've provided no information for anyone to assist you. Please Read Before Posting: How To Get A Useful Answer To Your Question. Once you provide detailed information on your issue, we'll try to assit
Maria

I just bought and installed mountain lion, and I can't get to sign in to hotmail.Can I get some help please. Thanks.

I just bought and installed mountain lion, and I can't get to sign in to hotmail after several trials. I need help please. Thanks.

so its in a forum, which I didn't stumble upon because it wasn't anywhere in the adobe troubleshooting steps for Windows 8 that automatically came up for me when I clicked that I couldn't see the test flash movie on their site. I guess if I spent another half a day googling I might have found it.
BTW, unchecking Active X filtering in IE10, was NOT the fix. I had to go into the security tab, and change the custom active X setting I listed above. So this link you provided which mentions unchecking Active X filtering was not the fix that worked in my scenario.

HT204408 My applications folder has a black question mark on it at the bottom of my screen. I do not know what error I made, but my fan effect of the previous applications has gone away. Can I get some help with this?

One day ago I inadvertantly removed my applications folder. In it's place is a folder with a black question mark which appeared after I attempted to open up the applications file. Also, previously when I clicked on the file applications would open in a fan display. Could I please get some assistance with this?

...removed my applications folder.
From where? And to where?
If you trashed it and emptied the trash, what backup, if any, do you have? If it's still in the Trash, move it back.
If no backup, reinstall Snow, which will give you the version as of the DVD you use, then update back to 10.6.8, and run all other needed updates, including any security updates. This should save all your third party programs, as well as settings.
The white puff of smoke is nothing, it only means you moved it out of the Dock. If you still have it, or had it, as soon as you open it it would reappear in the Dock. The item in the Dock is only a kind of alias.

How can I get some help with Verizon's customer service?

I want to preface this by stating that this is the first time in the 10 years in which I've been a Verizon wireless customer, that I've had a problem that cannot be resolved to my satisfaction. My issue started with a Verizon Wireless Stores in Bethlehem, PA. I asked one of the sales clerks for some assistance (which I now regret). My question to her was that I simply wanted to be able to connect my home laptop computer to the internet data on my mobile plan. Without even discussing the different options, I was "told" I needed to purchase a Mobile Hotspot Device (for $69.99, but just $20 after rebate!). I told the clerk I didn't want to have to pay an additional bill every month and didn't want something that wasn't absolutely necessary. She neglected to give me the more costly details, like the fact that it would require a 2 year contract on the device, and it would also cost me an additional $20 per month. She knew I wasn't really sure what the most cost-effective option was, so I trusted her knowledge. I even had my husband speak to her over the phone about the device, since he's more savvy about technology than I am. The clerk spoke with him the entire time she completed my transaction, and when she rang the sale up, she did not have me sign anything. She handed me the receipts, and told me I had 14 days to decide If I wanted to keep the device. When I got home and tried to use it, it would not connect to my computer. I took it to a local Verizon store on my lunch break one day and they looked into the transaction. They told me it was never put on my account; it was charged to someone else's account in error. I had to go back to the store where I originally purchased it. I wasn't able to get back to the original store right away, but I made sure to get there by the 14th day. It took two store managers to look at my account and figure out the error. They fixed it, but no one apologized to me for the inconvenience; they simply told me they could activate the device for me, or if I didn't want it any more, they would take it back (minus the $35 restocking fee). I took issue with the restock fee, because the store made the error by not giving me the full information at time of purchase, and then not charging it to my account so that I could try it out for 14 days. I was very upset that the manager refused to remove the restocking fee due to "policy" and that I "signed a contract" and I had to pay it. I argued that she should make an exception in this case, because I was inconvenienced. I told her if she valued my future business at her store, she would reconsider. She refused to budge and told me that I didn't need to shop in her store any more. I thought that was quite rude and insulting. So, I took all of my original receipts, along with the receipt that indicated that she refunded the $69.99 plus tax (minus the $35 restock fee). I left the store quite upset, but figured there wasn't much else I could say to her. Meanwhile, it's days later and my bill still shows the entire amount of $74 for the mobile hot spot device still on there. There is no credit for the return at all. I called customer service on my lunch break yesterday, and was on the phone for 45 min with a "Kendra R" to no avail. The entire call, she kept putting me on hold, and my bill was still not straightened out. When I asked to speak with a supervisor or manager, she said there was no one else available. Later that afternoon, I got an automated call (that left a voice message) from Verizon Customer Service to do a survey on my customer service experience. I did the survey and explained that my problem was not resolved and I would like a call back. No one has called me back yet, and I am stuck with no resolution to my problem. Now the Verizon store has the device back, and I still have the entire amount for it on my bill. Can you help me please?

Nope, it was a Verizon Wireless Store. I went in there in the first place because I trusted the Company for their professionalism, but I've been let down badly. I posted my story on here because I'm hoping to be able to get the attention of someone from Customer Service. It seems like the only way you can actually speak with a live person who knows what they are doing, is when you stop paying your bill on time. After you pay your bill, they transfer you to a poorly trained "rep" that has no authority to handle anything important. I'm actually a pretty patient person, but when it takes someone over 45 min mostly just to keep me on hold, and then tell me they can't help me, I'm not really impressed with their idea of customer service.

Can I get some help with my assets

Hi Everyone.
I've got a menu that I created and I made it an asset.
<a href="../pages/index2.html">Home</a> | <a href="../pages/Men.html">Men</a> | <a href="../pages/women.html">Women</a> | <a href="../pages/bio.html">Who is Eric Jay? </a>| <a href="../pages/contactUs.html">Contact Us</a></font>
Here is a link to it in order see it in action.
http://www.designsbyericjay.com/pages/WomenDesign5.html
You can see the link towards the top of the page all the words are jumbled.
I cannot figure out why this is.
Does anyone have any suggestions?
Thanks!
-Drew

Thanks Nancy.
I've been reading up and really studying your links. I've came to a roadblock that I'm hoping you can help me with.
#1. The adobe dreamweaver forum isn't working for me right now. So I hope this email makes it through to you as I am stuck.
#2. I have read up on positioning, floating and clearing but I must be doing something wrong.
Here is the current page
http://www.designsbyericjay.com/pages/index3.html
My questions/statements are these.
Someone said to not position things using any absolute divs. However, i cannot get around this.
I have started over from scratch. I first created a container div and set its position to relative with auto margins on the left and right of it. I want to put everything in my website inside that container div. I set a background image on it that I want to use.
The way I understand things is that if I place a 2nd div into the container div- the 2nd it will reside inside the container. If I add margin's to the 2nd div but leave positioning alone the div will move around inside the container relative to the container.
If I set the 2nd div to absolute I can position it anywhere relative to the size of the upper left corner of the browser window.
The problem is- if I leave the 2nd div position empty (or set it to relative) and then use margins to move it around- it does not move relative to the container. It actually takes the entire container and moves it and leaves a huge white gap at the top.
Please see link
http://www.designsbyericjay.com/pages/index4.html
Also,
I have a "central" graphic area where I want to have descriptions of a tshirt and a picture as well.
I created a new div (inside of the container div) and labeled it something like mainGraphic. Inside of that I put a 2nd div labeled something like tShirt description and an image. I set the tShirtDescription div to float left and the image to float left as well so they will butt against each other. I used no positioning. But set a width limit on the tShirtDescription. My thoughts on this are that the tShirtDescription div can grow/expand as needed and always reside on the left hand side of the mainGraphic div. The graphic will float next to it.
This worked great until I applied some padding to the tShirtDescritption div. After I went over 3px of padding the image dropped below the tShirtDescription div. (as you can see in the above link)
I am confused but feel like I'm really close to understanding all this. I'm obviously missing something at the root level. If you could give any suggestions I would appreciate it.
Thanks
Drew

Can i get some help with i-tunes?

i just got the new version of itunes and now it wont even start up. theres no message or anything. i tried right clicking it and clicking open and it still doesnt work.i also, before the problem, saved all the itunes music to a seperate folder in a different folder and that wont work either. can som1 please help me?

Hi, R2X.
I think you've already answered the first couple of questions but let's try to get an idea of what might be going on with some preliminary questions from b noir's "smack" for iTunes launch failures:
Is there an error message associated with the launch failure?
If so, what does it say and what (if any) error numbers are there?
If there's not an error message, let's check your QuickTime (its well-being is a requirement for a functioning iTunes).
Go to the XP Start menu > All Programs and try running QuickTime.
Does it start?
If not, then the same question as for iTunes - is there an error message?
If so, what does it say and what (if any) error numbers are there?
Do you notice any other peculiar behavior with QuickTime?

I think my hard drive is about to die, can I get some help?

Hello! Well, I have an iMac (I believe it's a mid 2007 model?) 20 inch, Core 2 Duo, and I believe my hard drive is failing. It's a long story, but its more or less exactly how it played out, so bear with me.
I noticed a few things going wonky a little while back, and started to back up data piece by piece. Well, eventually, I decided the best thing to do was to find a way to back-up my important files (I would have simply made a bootable back-up image of my HD on my external drive, but I have too many video and audio files on there to risk losing should I make it a dedicated back-up drive). Well, in transferring my files into my external drive I received Finder Error -36 (or something, may have been 036). After researching the error, it seems it commonly pops up with one of two possible cases:
in transferring files between windows and mac formatted drives and causing an error, or
a potentially failing hard drive.
Fearing the worst, I ran a verify disk on Disk Utility, and it said the disk needed to be repaired. Booted from my DVD, and ran the Repair Disk. It said the disk could not be repaired, to make immediate back-ups, and reformat the drive. Well, I hurried back over to mac to continue to attempt backing up my data to prepare for the reformat, the computer simply would no longer boot up the disk. It would go to the white screen and begin to boot, then immediately shut down. My BootCamp partition worked fine, however, except for a very similar transferring error. So I went ahead and reformatted (a quick one the first time) and Mac OS X refused to install (I am not sure if this was a DVD error as my optical drive is shot and very stubborn about reading a disc once I get one into the drive). I reformatted again, this time doing a 0 write out option.
After an excruciating week to reformat on a 0 write out, I installed Mac OS X (Leopard this time as to opposed Snow Leopard, in case it was a scratched disc). Well, thinking I had cured the problem, I tried to update to latest version, and upon doing so, encountered an error telling me the OS could not be updated. After rebooting the system, the computer seemed to go into a permanent status of a looped reboot. It would literally restart just as soon as the disk was loaded. So I reformatted again, installed Leopard, and ran disk utility. It told me that the disk could not be verified and needs to be repaired (after passing the verification test when booted from the DVD). Now when I am on the mac, it is incredibly slow and sluggish, and takes anywhere from 15 minutes to an hour to load iTunes, or even check e-mail on Safari. This was cause for my original concern before the Finder Error I encountered and believed it was just ram dying, but decided to get a head start on backing up files in case it was something far more serious. Is my hard drive simply dead and needs to be replaced, or is there something else I could do? It is currently running basic Leopard from the install disc without further updates, as it seems updating the system tends to kill it.
Thanks for any help at all greatly appreciated.

To be honest your post is rambling and difficult to read due to the lack of proper punctuation I only read it part way however...
The first thing to do is a proper backup. Your system has Time Machine built into it, here is the Time Machine Tutorial. Look that over, get yourself an external HD to use as a TM drive and backup properly! This will backup all of OS X however it will NOT backup MS Windows!
If you think your HD is failing then run Apple Hardware Test in Extended Mode and if it reports errors you can post them here.
Roger

Where can I get some help with my Nokia Maps Licen...

My problem is I bought a license and a Nokia n97.
I originally bought the license on my n95 and was able to transfer my license to my new n97. But since I have upgraded to version 3.0 my license has dissapeared.
I tried doing the sim card transfer method and that works up to the point where it tries to associate it with my new sim card (I changed provides when I upgraded). When it gets to this point it simply states "No updates" and then keeps trying again and again. I have rolled it back to version 2 and now have the same problem.
Unfortunately I have lost the email I got when I registered and I can't find any information on how to get this email resent.
I have tried speaking with Nokia care here in Sydney, Australia and they said it is a known problem but there is no fix for it.
I would like to try entering my license code again manually to see if thats possible. But I am told and I can see that nokia doesn't allow its customers to get this information again.
Please do something about this Nokia. It's really a **bleep** situation.
Solved!
Go to Solution.

zgeek wrote:
My problem is I bought a license and a Nokia n97.
I originally bought the license on my n95 and was able to transfer my license to my new n97. But since I have upgraded to version 3.0 my license has dissapeared.
I tried doing the sim card transfer method and that works up to the point where it tries to associate it with my new sim card (I changed provides when I upgraded). When it gets to this point it simply states "No updates" and then keeps trying again and again. I have rolled it back to version 2 and now have the same problem.
Unfortunately I have lost the email I got when I registered and I can't find any information on how to get this email resent.
I have tried speaking with Nokia care here in Sydney, Australia and they said it is a known problem but there is no fix for it.
I would like to try entering my license code again manually to see if thats possible. But I am told and I can see that nokia doesn't allow its customers to get this information again.
Please do something about this Nokia. It's really a **bleep** situation.
Hi zgeek,
I had a similar issue when moving from my N95-1 (maps 3.0 installed and licence upgraded) to my N86-1 (maps 3.0 pre-loaded). Everything was fine with the old SIM but couldn't transfer the licence across to the new handset and SIM.
Nokia ended up giving me new licences as the old ones didn't want to work anymore.
Have you searched your e-mail for the word "openbit"? Not sure if they just do Europe or the worldwide licencing sales.
One of the Nokia staff that contributes to the support forums was able to assist me (see this thread), as long as you have your N95 IMEI and SIM and your N97 IMEI and SIM then they should be able to sort it - It took me 3 weeks to resolve and cbidlake was excellent and prodding the right people.
Hope that this helps.,
Alun.
N8-00 (Product Code: 059C5Q8 (UK Generic)) FW Belle (111.030.0609.377.01)
Orange 5.1, NK702, 7110, 8310, 7250, 6230, N70, N95-1, N86 8MP, N8-00

Can I get some help?

Similar Messages

Maybe you are looking for