Can I have 2 buttons in Acrobat,switching between 2 formulas?

I have two button on a Acrobat PDF page.Button A (Car travel Distance) & ButtonB (Motorbike Distance)
If I click on button A it will give me A1 * 0.60
If I click on button B it will give me A1 * 0.30
Can it be done to have 2 buttons on the same page?

Thanks for the reply.Appreaciate it.I think this only work for 1 box.I need to the whole coloum.Let say the person hit the button Motorcycle:
Motorcycle =.getField("motorcycle").value = 0.2 or from the image it will be KMR * Row 1,eg: 8 km travel*0.2=1.6
If i click on button car
Car = getField("car").value = 0.6 or from the image it will be KMR * Row 1,eg: 8 km travel*0.6=4.8
How to exercute??

Similar Messages

HT1343 how do I switch between windows in the same programme? I know that I can use Command tab, however this takes you through all of the programmes that I'm using. What I need to do is have a shortcut to switch between windows in the same programme.

how do I switch between windows in the same programme? I know that I can use Command tab, however this takes you through all of the programmes that I'm using. What I need to do is have a shortcut to switch between windows in the same programme. For example if I'm in Excel and have 5 windows open I want to be able to scroll between each window of Excel only with a shortcut.
Please help!

Command and ~ keys to tab between open windows.
Technically it is the Grave Accent ` (aka reverse quote) under the tilda ~ key. Tilda ~ is shifted, and Grave Accent ` is not.
Command-Grave Accent

How can I insert a code to switch between channels?

I’ve got a HP4263A LCR meter which is being used with an ER-18 device to get multiple channel data acquisition, when I go to getting started to trigger the device, but this VI do not have an icon to change the channel how can I insert a code to switch between channels?

I am just trying to use the drivers developed by NI for this device, but I don't know how to work on them to obtain data from three points, or three channels which I am using from an ER-16 device. So all what I have is the driver VI for the HP4263A.the only VI I can use is getting started, because whe I try to run any other one, this message appears:
Error -1073807346 occurred at VISA Write in HP4263A Self-Test.vi.
Possible reasons:
VISA: (Hex 0xBFFF000E) The given session or object reference is invalid.
your help would be very helpful
thanks

Can I have a Face Time conversation between two Apple devices using the same Apple ID?

Can I have a Face Time conversation between two Apple devices using the same Apple ID?

Yes, you can, but the two devices can't have the same e mail address associated with both. Each, device needs its own unique e mail ADR. In your case, the iPod can call your iPhone if you use the phone number, but the iPhone can not call your iPod because it must use the e mail address, and if the email address is the same on both, the iPhone will think it's calling itself, so the call will not go through.

Instead of using image in a link column can we have button with name?

Hi,
In Apex , in report region instead of using image in a link column can we have button with name?
Thanks,
Anoo..

From your wording, it sounds like you used the built-in column link within APEX. You will need to edit your column and remove that so that the column is only containing the definition that is coming from the query (you can also just change the alias used for the column and then the old column with the link will be removed and the new alias will be added against your new button column).
-- Sharon

Ios 8 update doesnt have the option of switching between networks i.e 2G or 3G network.. pls rectify this issue

ios 8 update doesnt have the option of switching between networks i.e 2G or 3G network..
pls rectify this issue

Why don't you ask your best friend to rectify the issue? Oh, your best friend isn't Apple? Well neither are the users on this forum. APPLE IS NOT HERE

Can't change the shortcut to switch between windows (^F4) to altTAB

Hi,
I would like to switch between windows (not applications) by hitting ALT and TAB (same as Windows) instead of ^F4. In the preferences, I tried to change the shortcut labelled something like "Move focus to the active (or next) window". Unfortunately, it always complains that this shortcut is already used by another operation. However I can't find which operation uses ALT+TAB ?!
How should I do ?
Thanks in advance,
Barth

ecologisto wrote:
Hi,
I would like to switch between windows (not applications) by hitting ALT and TAB (same as Windows) instead of ^F4. In the preferences, I tried to change the shortcut labelled something like "Move focus to the active (or next) window". Unfortunately, it always complains that this shortcut is already used by another operation.
Interesting. I can't use the TAB key in ANY custom shortcuts. it gives an error sound (but no message) when i try. I tried it on 3 different computers. I suggest you try a different shortcut like alt+`. It's very close to alt+tab.
However I can't find which operation uses ALT+TAB ?!
How should I do ?
Thanks in advance,
Barth

Can't find the option to switch between MacBook speakers and Airplay speakers in iTunes 11.

In iTunes 10, the button to switch speakers was in the bottom right corner, now I can't find it anywhere. Does anyone know where it is, or if for some reason they removed this feature?!

Welcome to the Apple Support Communities
Go to the top right and turn on the iTunes miniplayer. Finally, you'll see AirPlay icon on it

Can we have button for every row in report

I am fetching a data from table. i need an update button corresponding to every row of the report. This is a requirement. Right now i have only one button corresponding to the report.
Thanks
Abhi

Hello Abhi,
Could you accomplish what you need by using a Column Link on the column instead of a button?
If not, here is a link where Denes uses a button in every row,
http://htmldb.oracle.com/pls/otn/f?p=31517:54:3198969584076356::NO
-Chris

What can i do to restrict client switching between AP's

Hello Community.
Problem is in one office if the client is exact in the middle of the two AP's the clients jumps from one AP to another all the time if he moves one step to right or one step to the left. How do i change these ap switching sensing ? The client uses a WLAN phone and during the AP's switch he get a little noise on the phone.
Thanks for your help and best regards

The APs are on differenet channels because of DCA, the power level where on Automatic "1" i set the power level in TPC from Automatic to fixed "2".
The show wlan:
WLAN Identifier.................................. 1
Profile Name..................................... internet
Network Name (SSID).............................. internet
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status ....................... Disabled
   DHCP ......................................... Disabled
   HTTP ......................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 17
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 64800 seconds
User Idle Timeout................................ 300 seconds
--More-- or (q)uit
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... WLC01
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream      Downstream
Average Data Rate................................   0             0
Average Realtime Data Rate.......................   0             0
Burst Data Rate..................................   0             0
Burst Realtime Data Rate.........................   0             0
Per-Client Rate Limits........................... Upstream      Downstream
Average Data Rate................................   0             0
Average Realtime Data Rate.......................   0             0
Burst Data Rate..................................   0             0
--More-- or (q)uit
Burst Realtime Data Rate.........................   0             0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
   Authentication................................ Global Servers
   Accounting.................................... Global Servers
      Interim Update............................. Disabled
   Dynamic Interface............................. Disabled
   Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
--More-- or (q)uit
Security
   802.11 Authentication:........................ Open System
   FT Support.................................... Disabled
   Static WEP Keys............................... Disabled
   802.1X........................................ Disabled
   Wi-Fi Protected Access (WPA/WPA2)............. Enabled
      WPA (SSN IE)............................... Disabled
      WPA2 (RSN IE).............................. Enabled
         TKIP Cipher............................. Disabled
         AES Cipher.............................. Enabled
                                                               Auth Key Management
         802.1x.................................. Disabled
         PSK..................................... Enabled
         CCKM.................................... Disabled
         FT-1X(802.11r).......................... Disabled
         FT-PSK(802.11r)......................... Disabled
         PMF-1X(802.11w)......................... Disabled
         PMF-PSK(802.11w)........................ Disabled
      FT Reassociation Timeout................... 20
      FT Over-The-DS mode........................ Enabled
      GTK Randomization.......................... Disabled
      SKC Cache Support.......................... Disabled
--More-- or (q)uit
      CCKM TSF Tolerance......................... 1000
   WAPI.......................................... Disabled
   Wi-Fi Direct policy configured................ Disabled
   EAP-Passthrough............................... Disabled
   CKIP ......................................... Disabled
   Web Based Authentication...................... Disabled
   Web-Passthrough............................... Disabled
   Conditional Web Redirect...................... Disabled
   Splash-Page Web Redirect...................... Disabled
   Auto Anchor................................... Disabled
   FlexConnect Local Switching................... Disabled
   flexconnect Central Dhcp Flag................. Disabled
   flexconnect nat-pat Flag...................... Disabled
   flexconnect Dns Override Flag................. Disabled
   FlexConnect Vlan based Central Switching ..... Disabled
   FlexConnect Local Authentication.............. Disabled
   FlexConnect Learn IP Address.................. Enabled
   Client MFP.................................... Optional
   PMF........................................... Disabled
   PMF Association Comeback Time................. 1
   PMF SA Query RetryTimeout..................... 200
   Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
--More-- or (q)uit
AVC Profile Name................................. None
Flow Monitor Name................................ None
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID     IP Address            Status
802.11u........................................ Disabled
MSAP Services.................................. Disabled

With version 9.0.1 I can no longer switch between Google accounts properly

I have a personal Google account and a Google apps account (via my employer, with a custom domain). I normally can log into either one and switch between the two using the "switch accounts" function. This currently works in chrome, and worked in Firefox until I received an upgrade to v9.0.1 today. Now the option to access the other account just isn't there anymore.
This feature is accessed from gmail by clicking on my name in the top right nav bar and choosing "switch accounts". You must have this feature turned on in the settings for both accounts to make this work. I use this to, for instance, read all my mail in one account and use the calendar or docs from the other one.
Anyone have the same experience? Anyone have a suggestion as to why or a solution?

Thanks for confirming things Vivek.Wilfred.
FYI, for future others with this problem: After a couple hours of playing around it was fixed, though I'm not sure what finally did it. Be sure that you try Google's "Sign Out of All Accounts", and not just the regular sign out option.

Restore Preview Button in Acrobat 9

Using Acrobat 9 on Mac OS 10.6.8.
     Previously when I opened a file in Acrobat and chose Add or Edit Fields it opened in the edit mode and at the top I had a button "Preview" to switch between Preview and Edit mode.
     Now that Preview button has been replaced with a question mark (?).
     So in order to see the preview I have to close form editing.
     Does anyone know how to restore that Preview button?
     Any help would be appreciated.
Ron A

I don't use the distribution feature. Is it in Designer? You may have to ask in the LiveCycle forum (the one for Designer).

Can I have 2 separate payment accounts on one computer?

I would like to create 2 accounts on my iTunes - can this be done?
I want to leave my credit card information on for myself but want to create a separate account for my 9-yr-old daughter to use iTunes gift cards. I don't like that she can download anything with my credit card account when she likes...and I can't find the remedy on your website.
I would rather not have to keep re-entering my credit card information everytime I want to make a purchase for myself. I really like the convenience of 1-click purchase for myself.
iPod video 5th generation

Yes, you can have up to five iTunes Store accounts at the same time. I'd agree with Timmy that it would probably be easiest if you set up a separate Windows user account for her. Then her iTunes can remain logged in with her iTunes Store account and you won't have to worry about switching between her iTunes Store account and yours.
BTW, just so you know, we're all just fellow users here. With rare exceptions, you will never get a response from any Apple employee.

Fastest way you switch between multiple images (CS3) ?

I'm originally a Fireworks user (from 2001) and am starting to learn Photoshop as it is in my CS3 set and it's superiority in image editing.
BUT, I was suprised/shocked/P.O.-ed to notice Photoshop doesn't have tabs to easily switch between images like Fireworks has had for the last 7 years.
(Yes, I realize CS4 has that option now, but I'm not willing to dole out another $600 bucks for another upgrade )
Anyway, enough ********.
My question is:
"Can you tell me how you switch between multiple images opened in Photoshop CS3?"
I'm assuming there must be a keyboard shortcut I can't find, or something besides having to shrink down the images and routing through them . . .
Thank you for your time and help,
Brad

Hi again My,
Thanks for the reply on my other post as well.
Ctrl+Tab
Got it. Thank you.
Quick and easy enough. I'm happy :-)
Brad

Switching between programs

I have one little problem. I know very well how to use mac OS X in most situations but I just can't find out how to switch between programs when an override is active like battlefield 1942. I just want to look if I god messages in Adium or I like to switch music in iTunes. Command-Tab does not work here. I tried many man things but didn't find it.
Thanks for help.
Bastian

I'm not really a "Game" person, and have none loaded on my Mac.
But I would think that if your Dock preferences are set to "Automatically hide and show the dock" you should just be able to move your pointer down to the dock position and switch to your programs that way.
Also, have you tried hitting the Command+Tab keys at the same time and switching between programs that way? (you press the Command Key and while keeping that held down you press the Tab key then by repeatively tapping the Tab key you move across the icons of open programs to get to the one you want)

Can I have 2 buttons in Acrobat,switching between 2 formulas?

Similar Messages

Maybe you are looking for