Can I increase the volume output for the entire library? (versus song by song in the options menu)

In fact, I use iTunes when I dee-jay for private parties.  I have a Bose sound system, and sometimes with the volume on the Bose all the way up, the music is not loud enough.
I know I can go into each song and sound enhance from "none" (default) to 100 percent which boosts the sound quite a bit.
I would like to know if this is doable....to change the sound volume up to 100 percrent for the entire music library?  and also if this is advisable or not?

Thanks Chris..duly noted..may give it a try...or at least to 75%.  Another person responded that it could have negative effects on playback or equipment, but I can (and would) always back down the sound volume on the devices connected and then set the preferences to equalize the songs to each other to avoid large differences between "hits."
That is why I want to apply it to the whole library vs. particular songs.
I bought a Bose System 5 computer sound system for the small house parties..and I was surprised to max out sound on it...not having reached the point of any distortion..based on songs at the default "0" level.
I had thought about doing what you suggested as I sometimes do that for multiple selections...but was not sure I could "select all" - that gives me an option.
Much appreciated!
Ronny

Similar Messages

  • I purchased an iPod touch few months back. And i am very upset with the volume output it produces. iPod being an music player, has poor volume quality then my iPhone 3gs. Can anyone pls help. How do i rectify it?

    i purchased an iPod touch few months back. And i am very upset with the volume output it produces. iPod being an music player, has poor volume quality then my iPhone 3gs. Can anyone pls help. How do i rectify it?

    Problem with both the speaker and earphones?
    Have you tried another pair of headphones?
    Yu can try the standard fixes to rule out a software problem:
    - Reset. nothing is lost.
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • So I  downloaded acrobat XI Standard from the Adobe website, when I go to install it, it says "Adobe XI Pro" at the top left corner. Can anyone shed some light on this for me? I have a volume license for XI Std. so I would like to use the Std. version.

    So I  downloaded acrobat XI Standard from the Adobe website, when I go to install it, it says "Adobe XI Pro" at the top left corner. Can anyone shed some light on this for me? I have a volume license for XI Std. so I would like to use the Std. version.

    login and download your software from the adobe volume licensing website, Customer resources | Adobe Buying Programs

  • Can i change the volume level for just a part of a track?

    i am trying to raise the volume level for just a little section of a track without raising the volume for the whole track, just a one little section. can i do that on garage band? how would it do that?

    Yes you can
    On the track instrument selector, there is a row of small buttons, one being an upside down triangle. Click the triangle to display Automation. The default controller is Track Volume. You will see a bright green line which is the volume level throughout the track..
    Simply, go to the location where you want to reduce the volume, click on the green line to insert a control point. The first click is used the maintain the current volume. Go to the point where you want the volume to be reduce to, and click-and-hold the line and drag the new control point to the target volume.
    NOTE: Use the Shift key to adjust incremental amounts.
    Have fun!!

  • Unable to find the published output for this request - problem

    Hi ,
    In the invoice Payables module i modified a report to be open in xml and not text as it was. The program name of this report iis Print Invoice Notice. I did same thing we normally do to register a xml report in ebs.
    The problem is that when i run the report from the invoice form and from the button wich call this raport i get this error:
    Unable to find the published output for this request.
    No output file exist for the request
    and if i see the log file i get this message :
    Arguments
    P_INVOICE_ID='10243'
    APPLLCSP Environment Variable set to :
    XML_REPORTS_XENVIRONMENT is :
    +/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb+
    XENVIRONMENT is set to  /oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    AMERICAN_ALBANIA.UTF8
    +' '+
    REP-3000: Internal error starting Oracle Toolkit.
    Report Builder: Release 6.0.8.27.0 - Production on Fri Mar 27 02:30:46 2009
    +(c) Copyright 1999 Oracle Corporation. All rights reserved.+
    The thing is that if i run this report from Other ->Request -> Run of the same module this raport runs correctly
    And if i change the output of my report (From concurrent manager) to text its open correctly even from there where i want to open it.
    Can anyone give me any sugestion why i get this error while i try to open this xml publisher report from a button in a form in application?
    PS: i am using ebs 11.5 version
    Thanks in advance,
    Best regards

    Hi,
    REP-3000: Internal error starting Oracle ToolkitThis errors was discussed many times before in this thread, so please search for REP-3000 and fix this error first ( [REP-3000|http://forums.oracle.com/forums/search.jspa?threadID=&q=REP-3000&objID=c84&dateRange=all&userID=&numResults=15] )
    Regards,
    Hussein

  • What is the AC output for the orgnal charger for Camelio x100?

    hi,
    I lost my ac adapter for my Camelio X100 camera. I want to know the AC output for the orignal adapter because I need to buy a new one.
    Please if you have same camera model (Camelio X100) just take a look for PC adapter and tell me how much ouptu volt and output Amp ?
    Best Regards

    You should archive the material in it's native format so that you have the possibility to revisit the project and make changes or generate master files in other formats.
    Use the Media Manager to consolidate your project into a single enclosing folder. This can be compressed into a .zip file or disk image. It will save space if you dont include render files, even more if you make the material that came from tape, offline -although you will have to recapture in that case.

  • Getting error "Unable to find the published output for this request"

    1. Created a Data Template
    2. Created a Data Definition using the above Data Template
    3. Created a RTF template and registered the same in XML Publisher Administrator
    4. Created Concurrent program for the data template using 'XDODTEXE' as executable
    5. Ran the above concurrent program and it completed successfully.
    6. When I click the 'View Output' button in Oracle applications it says "Unable to find the published output for this request".
    7. I can see the XML output in the $APPLCSF/out directory.
    8. Also the short name for concurrent program and data definition code and template code are same.
    I assume the Concurrent Manager’s Output Post Processor is not able to setup the layout template to the generated XML.
    Am I missing something here. Can anyone come across this issue.
    I have the XML publisher 5.6.1 patch on the DB. Do I need to take 5.6.2 Patch to fix this issue.
    Thanks

    I tried again after applying XDO 5.6.2. I am still not able to see the output.
    Here is the logfile info. There is no mention of OPP or PUBLISH section:
    XDO Data Engine ver 1.0
    Resp: 21540
    Org ID : 101
    Request ID: 348042
    All Parameters: p_batch_id=7169
    Data Template Code: AUDRPT
    Data Template Application Short Name: XXCUST
    Debug Flag: Y
    {p_batch_id=7169}
    Calling XDO Data Engine...
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Executing request completion options...
    ------------- 1) PRINT   -------------
    Printing output file.
    Request ID : 348042
    Number of copies : 0
    Printer : noprint
    Finished executing request completion options.

  • The volume on my iPad 3 has gone. I've checked the mute button, tried restarting, resetting etc and nothing has changed. I can't hear the music, hear any sound from videos. Most times the video stops playing after a seconds. My iPad 3 is only 2 months ol.

    The volume on my iPad 3 has gone. I've checked the mute button, tried restarting, resetting etc and nothing has changed. I can't hear the music, hear any sound from videos. Most times the video stops playing after a seconds. My iPad 3 is only 2 months ol.

    If you have lost all sound and video is freezing on you, that ain't good. Your iPad is two months old so I would not hesitate to contact Apple at all. You are entitled to 90 days of phone support.
    http://www.apple.com/support/ipad/contact/.
    If you want to try a couple of things on your own, try quitting all apps and then reboot the iPad - not so much for the sound issue itself - but more as a general "start all over again" sort of approach. It might help with the video freezes.
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Reboot the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If you use headphones on occasion, you can try plugging and unplugging those as well and see if the sound comes back.
    You could even try restoring the iPad to factory settings and then restore from a backup, but unless there is something totally hosed on the iPad, that should not be necessary with a two month old device - of course assuming that you didn't drop the iPad or do something accidental that could be causing the problems.

  • Are there any apps for having seperate volume controls for each app if multiple apps are playing at the same time?

    Are there any apps for having seperate volume controls for each app if multiple apps are playing at the same time?

    I don't think you can do that the volume is universal, but maybe turn down the volumes in the app settings?

  • HT201209 How can I create an apple ID for my daughter, without adding a credit card to the account?

    How can I create an apple ID for my daughter, without adding a credit card to the account? I have tried to purchase a gift card online, but it just credits it to my account; I cannot use it to credit her new account therefore I cannot create that account.

    There are intructions on this page for how to create a new account without giving credit card details : http://support.apple.com/kb/HT2534
    e.g. log out of your account, find a free a free app in the store, click on its free 'price' :
    click on 'create Apple id' on the popup :
    Agree to the terms and fill in the details, and you should get 'none' on the payments screen.

  • I use an external hard drive for my Lightroom library and I notice that all the images shown on there are DNG. On my MAC hard drive I have images shown as NEF. I desperately need to free up space on my hard drive, can I safely delete these NEFs?

    I use an external hard drive for my Lightroom library and I notice that all the images shown on there are DNG. On my MAC hard drive I have images shown as NEF. I desperately need to free up space on my hard drive, can I safely delete these NEFs?

    dj_paige wrote:
    however, I do point out that obtaining an additional hard drive and not throwing anything away seems a preferable solution to me.
    heidie22, dj_paige has a very good point there. I would not through away the NEF files; I would archive them to a external drive.
    By the way, I am assuming that converting RAW files to DNG is a decision you have made and not an accident.

  • HELP!  I tunes wouldn't update so I tried to delete and reinstall.  I keep getting a message stating the installation source for this product is not available.  Verify that the source exists and that you can access it.  please help!!

    Help!  Itunes wouldn't update so I tried to delet and reinstall.  I keep getting a message: The instillation source for this product is not available.  Verify that the source exists and that you can access it.  I also get this message:  The feature you are trying to use is on a network resource that is unavailable.  Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes64.msi' in the box below.  Help I have no idea what that means or how to fix it. 

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page). Here's a screenshot showing the particular links on the page that you should be clicking:
    After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
    Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
    When the dialog appears, choose to save the file.
    (2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • The recent upgrade for i-tunes prevents me from adding and using the Field, "Show". How can I add this field in i-tunes?

    The recent upgrade for i-tunes prevents me from adding and using the Field, "Show". How can I add this field in i-tunes?

    Hold down shift as you right-click > Get Info to get the old style dialog box.
    tt2

  • After downlaoding the lastest software for my iphone, it could not be activated because the phone was showing "No Service". Please want else can i do?

    After downlaoding the lastest software for my iphone, it could not be activated because the phone was showing "No Service". Please want else can i do?

    Thank you ProjectVRD. But this has not soloved the problem. It still shows no service even with my sim card well inserted. Even tried using sim card of another service provider thinking the problem could be from the service provider, it wasnt working still. PLEASE APPLE HELP ME.................

  • Can i use ms office code for mac air on my macpro instead of purchasing the CD

    can i use ms office code for mac air on my macpro instead of purchasing the CD?
    Because i just got a new macbook pro and my sister has the macair she purchased ms office for her mac air so i was wondering if i could just use her code or do i have to buy a specific Ms office CD for my kind of mac?

    Bibi234 wrote:
    can i use ms office code for mac air on my macpro instead of purchasing the CD?
    Because i just got a new macbook pro and my sister has the macair she purchased ms office for her mac air so i was wondering if i could just use her code or do i have to buy a specific Ms office CD for my kind of mac?
    Office for Mac comes with a single or (for extra cost) a 3 license pack. Unless your sister has multiple user licenses you may not use her code.

Maybe you are looking for