Can I input the single-ended image signal to PCI-1424?

One of my customer wants to input the single-ended image signal to our PCI-1424 instead of the differential or TTL ones, is it impossible to do that ?I've check the user's manual and it only mentioned that the input signal can be DIFF or TTL-compatible.

TTL signals are single-ended, so if the image signal follows TTL specifications, it will work with the 1424.
Regards-
Julie S
Applications Engineer
National Instruments

Similar Messages

  • Can i use a single ended encoder with a 7344 controller?

    Can i use a single ended encoder with a 7344 controller?

    The encoder inputs of the 7344 are ground referenced. So the answer is yes, you can use a single ended encoder with a 7344 controller. Signal connection should be straight forward.
    If you are using a UMI-7764 for signal connections please refer to the "Encoder Terminal Block" section (page 15) of the UMI User Guide. There are drawings for the signal connections for single ended and differential encoders.
    For the case that you don't have the user guide of the UMI-7764 please download it from this link:
    http://digital.ni.com/manuals.nsf/websearch/AC6FAA69218C9624862567BD0061DDAC?OpenDocument&node=132100_US
    Best regards,
    Jochen Klier
    Applications Engineering Group Leader
    National Instruments Germany GmbH

  • Change inputs from single ended to differential at run time

    I have a software package written that reads in analog values using a 6014 DAQ board. I want to allow it so that the user can select (at run time) whether the inputs are single ended or differential. This would be stored in a database and saved.
    I am reading in the analog values using a CWAIPoint. I don't see anywhere where you can specify the Input Mode for a CWAIPoint at run time?!
    Am I missing something?
    Any help would be appreciated!
    Thanks
    CM

    Sorry, just found the answer. First time I've answered my own question.
    CWAIPoint1.Channels(X).InputMode =
    Where X is the channel string. Intellisense will give you a list of input modes if this is typed in.

  • How can i change the title and image of  published exe

    Hi ,
    I have published a fla file in exe format .
    how can i change the title and image of this exe? do I ve to
    use some of the available softwares in the market? cant i do the
    customised setting in the flash player itself?

    On Fri, 4 Apr 2008 06:21:15 +0000 (UTC), "mFlexDev"
    <[email protected]> wrote:
    > I have published a fla file in exe format .
    > how can i change the title and image of this exe?
    I beleave the easiest way is to use PEResourceExplorer,
    Resource
    Hacker or similar software to modify EXE resources, such as
    window
    title and window icon.

  • Where or how can we input the Intermediary Bank info in Vendor Master?

    Hi
    I would like to know if there are specific fields were we can include information of an Intermediary Bank when we are creating the Vendors Account Information.
    For instance, if we have the following information, how and where should we input the Intermediary Bank information?
    Vendor's Name:    ABY COMPANY
    Vendor's Address:    Miami, Florida
    Vendor's Account:    123789456
    Vendor's Bank Name:    CITIBANK N.A.
    Vendor's Bank Address:   Miami, Florida
    Vendor's Bank BIC Code:   CITIUS33MIA
    Vendor's Bank ABA Code:   266086554
    Vendor's Bank Intermediary Bank Name: CITIBANK, N.A.
    Vendor's Bank Intermediary Bank Address: New York, New York
    Vendor's Bank Intermediary Bank BIC Code: CITIUS33XXX
    Vendor's Bank Intermediary Bank ABA Code: 021000089
    Where or how can we input the Intermediary Bank information?
    Tks in advance for your reply
    reg
    vishnu

    Hi
    Thanks for your inputs
    Actually we need to create a link between Vendor mail bank and Vendor Intermediary bank, is there any possiblility in Vendor master data?
    As you explained i checked the settings, how can i create link between from main bank to intermediary bank?
    reg
    Vishnu

  • How can i reduce the size of Images  in MIDlet

    Hi all,
    How can i reduce the size of Images in Form,bcoz they are covering lots of spaces in form due to that other items are not displaying in specific order.
    Best regrads
    karan

    Better you can use Canvas class and using drawImage() function you can show the image. Before that you have to Get the maximum size of your phone screen using the following:
    x = (width/2) - (image.getWidth()/2);
    y = (height/2) - (image.getHeight()/2);

  • Cisco Prime Infrastructure - I can't see the hardware virtual image when I selected a device managed by Prime Infrastructure. See attached picture

    My Cisco Prime Infrastructure ver. 1.2.1.12
    Cisco Prime Infrastructure - I can't see the hardware virtual image when I selected a device managed by Prime Infrastructure. See attached picture.
    Please let me know how to access or enable the feature.
    Thanks,
    Tek

    This is by no means a full solution, but deleting and re-adding only takes a few minutes if you use the "Export Device" and "Bulk Import" features from the Device Work Center. You can export the desired devices to a CSV file, delete them, then import from the CSV. 
    Of course, you might lose historical data when deleting the devices, but I'm guessing that's not as relevant since the devices themselves have been replaced by different hardware.

  • HT5361 IN OS 10 where can one find the folder for images that came with email?

    IN OS 10 where can one find the folder for images that came with email?
    I wish to delete the leftover image files to free up drive headroom.

    I checked in this place, no dice!
    Home/Library/Mail Downloads, or
    the system "Downloads" folder

  • I can't see the raw thumbnail image when in download them to bridge.  what is wrong

    I can't see the raw thumbnail images when I download them into bridge what is wrong?

    What model camera?  for example: Nikon D50
    What version of Bridge? PC or Mac?
    What version of Adobe Camera Raw is installed? 
    Gene

  • HT201412 my iPad is frozen.. it won't shut off.. i can't do a forced restart.. it doesn't respond to that either.. i can't connect it to iTunes because it needs passcode entered but again the iPad is frozen so i can't input the passcode- can't do recovery

    my iPad is frozen.. it won't shut off.. i can't do a forced restart by holding the sleep/wake and home button.... it doesn't respond to that either.. i can't connect it to iTunes because it needs passcode entered but again the iPad is frozen so i can't input the passcode… I also can't do recovery mode as the ipad won't shut down for me to do a recovery mode.... HELP

    Erase iPad and setup iPad from scratch
    1. Launch web browser on your computer
    2. Sign in to www.icloud.com
    3. Tap on Find My iPhone
    4. Select the iPad to be erased
    5. Tap Erase iPad
    6. Message: All your content and settings will be erased. An erase iPad cannot be located or tracked
    7. Tap Erase
    8. Enter Apple ID and Password
    9. Tap Next
    10. Enter a phone number where you can be reached. It will be shown on your iPad after it has been erased
    11. Enter phone number
    12. Tap Next
    13. Tap Erase iPad
    14. This message will be shown on your iPad after it's been erase "This iPad has been lost. Please call 12345678"
    15. Done
    16. Erase started
    16. OK
    17. Remove from Account (this will allow iPad to be activated and used by another person)
    Setup wiped iPad
    1. Slide to unlock
    2. Select English
    3. Select Country
    4. Choose Wi-Fi Network
    5. Enter Wi-Fi password
    6. Activate iPad
    7. Apple ID and Password
    8. Apple ID and Password
    9. Enable Location Service
    10. Select "Restore from iCloud Backup"
    11. Enter iCloud password
    12. Agree to Terms and Conditions
    13. Choose backup
    14. Select "Backup file in iCloud"
    15. Hello (Welcome)
    16. Slide to unlock
    17. Update Completed
    18. Continue
    19. Enter Apple ID and Password
    20. Updating iCloud
    21. Select "Don't Add Passcode"
    22. Welcome to iPad
    23. Get Started
    24. Restore Apps and Media. Your settings have been restored. Connect to power to save battery while apps and media are downloading
    25. Sign in to iCloud

  • How can I change the appearence (an image I had in the last version) in Firefox 5

    How can I change the appearence (an image I had in the bars section,in the last version of Firefox) in the new version Firefox 5?

    See these articles:
    https://support.mozilla.com/en-US/kb/Using+themes+with+Firefox#Personas
    http://kb.mozillazine.org/Themes#Lightweight_theme

  • My work phone number has an extension. Can I input the number so that it pauses and then dials the extension?

    My work phone has an extension. Can I input the number ito my contacts so that it pauses and then dials the extension?

    Please see thread https://discussions.apple.com/thread/4329335?start=0&tstart=0
    Pause and Wait doesnt work wiht Iphone 5 with ios 6.0

  • How can I create a single background image for a BorderLayout?

    I can create a background with an image file for the individual panel (North, West, Center, East and South) in a BorderLayout, but I've been spinning my wheel for a long while now trying to figure out how to create just one background with a single image file for all of these panels?
    In my application, a panel may contain various buttons, a listbox, a group of checkboxes, a combo box, or a canvas. Even if I used the same image file, when the panels are finally put together, one can clearly see that the end product is the result of a lot of patch works.
    Hope someone has an answer for this. BTW, I'm using AWT because it works with existing browsers without the need for a separate Java plug-in.
    Regards,
    V.V.

    Look at this :
    import java.awt.*;
    import java.awt.event.*;
    import java.util.*;
    import java.awt.image.BufferedImage;
    public class PanI extends Frame
         Image map;
         Panel pan;
         myPan p8,p4,p6,p2,p5;
         BufferedImage I;
    public PanI() 
         addWindowListener(new WindowAdapter()
        {     public void windowClosing(WindowEvent ev)
              {     dispose();
                   System.exit(0);}});
         map = getToolkit().getImage("map2.gif");
         MediaTracker tracker = new MediaTracker(this);
         tracker.addImage(map,0);
         try   {tracker.waitForID(0);}
         catch (InterruptedException e){}
         I = new BufferedImage(1,1,BufferedImage.TYPE_INT_ARGB);
         setBounds(10,10,map.getWidth(null)+8,map.getHeight(null)+27);
         setLayout(new BorderLayout());
         pan = new Panel();
         add(pan,BorderLayout.CENTER);
         pan.setLayout(new BorderLayout());
         pan.setSize(map.getWidth(null),map.getHeight(null));
         p5 = new myPan(5);
         p5.setBackground(Color.red);
         pan.add(p5,BorderLayout.CENTER);
         p8 = new myPan(8);
         p8.setBackground(Color.orange);
         pan.add(p8,BorderLayout.NORTH);
         p4 = new myPan(4);
         p4.setBackground(Color.blue);
         pan.add(p4,BorderLayout.WEST);
         p6 = new myPan(6);
         p6.setBackground(Color.green);
         pan.add(p6,BorderLayout.EAST);
         p2 = new myPan(2);
         p2.setBackground(Color.pink);
         pan.add(p2,BorderLayout.SOUTH);
         setVisible(true);
    public class myPan extends Panel
         int where;
    public myPan(int i)
         super();
         where = i;
    public void paint(Graphics g)
         if (I.getWidth(null) != pan.getWidth() || I.getHeight(null) != pan.getHeight())
              I = new BufferedImage(pan.getWidth(),pan.getHeight(),BufferedImage.TYPE_INT_ARGB);
              Graphics      G = I.getGraphics();
              G.drawImage(map,0,0,pan.getWidth(),pan.getHeight(),null);     
              G.dispose();
         int x1=0;
         int x2=getWidth();
         int y1=0;
         int y2=getHeight();
         if (where == 8)
         if (where == 2)
              y1 =  p8.getHeight()+p5.getHeight();
              y2 =  getHeight()+y1;
         if (where == 4)
              y1 =  p8.getHeight();
              y2 =  y1+getHeight();
         if (where == 5)
              x1 =  p4.getWidth();
              x2 =  x1+getWidth();
              y1 =  p8.getHeight();
              y2 =  y1+getHeight();
         if (where == 6)
              x1 =  p4.getWidth()+p5.getWidth();;
              x2 =  x1+getWidth();
              y1 =  p8.getHeight();
              y2 =  y1+getHeight();
         g.drawImage(I,0,0,getWidth(),getHeight(),x1,y1,x2,y2,null);
    public void update(Graphics g)
         paint(g);
    public static void main (String[] args) 
         new PanI();
    Noah

  • How can I change the default cover image in iTunes?

    Good evening everyone!
    I've scoured the web for this info but can't seem to find it. Is there a way to change the default cover image in iTunes to one of my choosing? You know the one I'm talking about right? The transparent CD cover with the musical note in the middle of it... the one that shows up when iTunes can' find appropriate cover art for your music. I have another image I'd like to use instead, as I've never liked the default image at all. The one I have to replace it is an image of a blank CD case. Kinda cool and would look infinitely better than the default in my opinion.
    Has anyone done this before? If so, can you describe to me how it's done, or point me to somewhere on the web that describes how? Many, many thanks in advance Have a great weekend!!!

    I understand what you mean - I too, would like to see some variability in the 'default'. Besides having a single default, I would step that up to a default that changes with genre and media: ie. I could see using a sax for Jazz; a microphone for a Podcast, etc.
    I don't have the answer to your question yet, but I think I'm going to crack open the iTunes package to see what default images there are embedded in there.

  • Help: Can't change the Media End Timecode

    Hi,
    We are trying to Recapture a Clip that was originally Captured using "Capture Now" and accidently someone let the Capture continue past the end of the tape.
    This kind of issue doesn't cause a problem using the original clip, because all you end up with is some extra Black at the end of your Clip with no Timecode (you loose some drive space, but not much else).
    But now that we are trying to Recapture this Clip using "Batch Capture", this extra Media with no Timecode will not allow the Clip to be Captured, because FCP doesn't know what to do when it reaches the End of the Tape, it just stops the Capture without saving the hour of media it already Captured.
    I did a little poking around and the FCP Manual says that you can Edit the Clips "Media End" Timecode in the "Clip Properties" Window, but that doesn't seem to work.
    Has anyone run into this? Am I missing something or can you Edit a Clips "Media End" Timecode in the Clip Properties Window like they say in the Manual?
    Thanks for any input.
    Kalagan

    Hi Jim,
    Thanks for the suggestion, but FCP will not allow me to Modify certain information in my Offline Clip, in the Browser or Properties Windows. I can Select and Modify the Duration, the In and Out Points, but FCP will not allow me to select or modify the Media Start or Media End points.
    Should it be able to do this? It seems like FCP should be able to do this.
    I think we just found a WORKAROUND for this, it is a little clunky, but seemed to work.
    It is; we created a dummy sequence that started 10 seconds before the Media End point we wanted, dropped in 10 seconds of Bars and Tone into the dummy sequence, found that dummy sequence in the Browser, then "Option Clicked" on the dummy sequences "Media End" point, dragged the little box that pops up on top of the "Media End" point of our problematic Clip and let go.
    This process replaced the Media End point of our problematic Clip with the Media End point of our Dummy Sequence. That seemed to work. We are currently Batch Capturing that clip again, we will see what happens.
    But at least now our Clip has the proper Media End point.
    I'll let you know what happens.
    Thanks
    kalagan

Maybe you are looking for

  • Where is the deco tool in flash professionnal cc (Was: flash professional cc)

    I want to know if someone know where is the deco tool in flash professionnal CC ?? or how can I use someting similar? the ting I want to do is a flake effect going out of a compagny logo. I don't want to do it frame by frame by hand.

  • Send sms to mobile through forms 6i

    Dear sirs, I want to send sms on mobile through forms 6i it is avalible? and how to do it? pls help me Thanks in advance Yasser

  • Evaluation path reading OM up and downwards

    Hello! Starting from a Person i need a evaluation path that reads P-S-O and then O upwards and downwards. From these O's the path has to find all O-S-C. So, is that possible to read the OM in the same path up and down? Thanks for any information! Bes

  • IRC and proxy setup

    I'm running my MacBook behind a proxy at work. I would like to get to a few open-source software support channels on IRC, and the darn proxy is frustrating. Is there a semi-painless way of doing this? I've tried a few things, including some GUI clien

  • JboInitialContextFactory...

    Hello e'body! I deployed my applet with JDev 3.1 to OAS 4.0.8.1. It works fine any client's browser, but not on the web server machine's browser. I'd got the message: "cannot instantiate oracle.jbo.common.JboInitialContextFactory.", because doesn't f