Can I install from a shared drive?

I have about 25 people who need to install Technical Communication Suite 4. Does each person need to copy the installation files (exe and 7z files) to their local environment before running the install, or can they run the install files from a shared drive and it will install TCS4 on their local?

Shannon,
If you've purchased your license through the volume licensing program, you should be using the Adobe Application Manager Enterprise Edition Release 3.1 tool to install your TCS4 licenses.
See: http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Ad obeApplicationManagerEnterpriseEditionReadme_v_3_1.pdf

Similar Messages

  • Can't install from USB Thumb Drive

    I'm trying to install MacOs 10.7 from Apple USB Thumb Drive on a 2011 MacMini, but when I restart from the USB drive apper on the screen a "X" and then the computer shuts down.
    What's wrong?
    On the MacMini there was already MacOs 10.7, but now I formatted the HardDisk.
    Sorry for my english,
    Gregorio Pellegrino

    Is the system able to boot into the recovery/installer from the Mac OS X 10.7 USB Drive? Is this error occurring after you've started the install process from the USB?
    You may have to completely repartition the hard disk drive with 1 partition and a GUID partition table. I had a similar issue when I moved a hard disk from a Windows machine and forgot to change the partition type.
    Note: Creating a new partition table will make all data currently on the disk inaccessible, effectively erasing the data.
    Here's the steps to repartition using the Disk Utility application available after booting the mac from the USB Installer.
    1) Highlight/select the Mac's internal Hard Disk Drive (not the volume) in Disk Utility. The disk will be named something like "240 GB OCZ-VERTEX3", depending on your specific size, make and model. Basically the format is "Size GB Make/Model".
    2) Click the "Partition" tab on the right side.
    3) From the "Partition Layout" pick box select "1 Partition"
    4) Click the "Options" button below the drive space diagram. Select the option "GUID Partition Table". Click OK.
    5) Click the Apply button and allow Disk Utility to complete the task.
    6) Quit Disk Utility and begin the install process to the Mac's Internal Hard Disk Drive.
    The above resolved this issue for me and it makes good sense why it worked since the partition scheme/table on my drive was MBR and I changed it to GUID.
    Good Luck,
    -Josh
    Message was edited by: Joshua Kapellen

  • Can you install a second hard drive on a Touchsmart320-1130 PC?

    This question was solved.
    View Solution.

    Here are the specs for your HP TouchSmart 320-1130a Desktop Computer. No, you can't install a second hard drive in this computer. The HP TouchSmart and All-in-One computers have more in common with laptops than they do with desktops.
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Can't install a 32 bit driver on my new 64 bit server

    I have a windows 2008 R2 server runing the print server. I have a HP Laserjet 4345 MFP Printer and can't install the 32 bit driver. I have installed the 64 bit but when I try to add the 32 bit driver is states that it is not the correct driver? I have downloaded the PCl 5 Driver (HP_LJ_M4345MFP_PCL5_32bit) But it states it the wrong driver. Please Help
    Thanks,
    Dave
    David Babbel
    System Admin

    Hi broadwater,
    Could you please re-download the package from this link and then install
    http://www.adobe.com/go/tryphotoshop_elements/
    Regards,
    Sandeep

  • Can I boot from a SATA drive? What if it's RAID?

    I'm planning on getting the MSI 875P Neo FIS2R 800FSB motherboard. I'm also planning on getting ONE SATA hard drive. Can I boot from the SATA drive? Do I HAVE to set up it as a RAID drive? Can you boot from RAID drives? RAID and SATA confuse me a little. Anyone care to help?

    I'm using the MSI 865PE Neo2 board and I'm having this problem.  It probably has an easy solution, but this is my first build, so I'm not sure exactly what to do.  
    MSI 865PE Neo 2 Mobo
    2.4b P4
    Seagate SATA 80GB HDD
    Panasonic FDD
    Lite-On DVDROM
    It took me a little bit of experimenting, but I got the BIOS to recogonize the DVD & HDD.  It seems every time I got it to recognize one, the other disappeared.  Anyway, like I said, BIOS recognizes all 3 now.
    I go to install XP and it says I need to install the drivers from a floppy (after I had previously hit F6).  Well, where do I get the drivers?  I have a CDROM that came with the mobo but I don't know where to find the drivers for the SATA controller on it.  ???  
    Can someone help me by directing me to a download and/or the file names that I need to transfer to floppy for Win XP installation?  I would appreciate it.  Thanks.

  • Can I boot from an external drive with a "Virtual CD"

    I just purchased a Hitachi LifeStudio external hard drive for use as my Time Machine backup. When I plugged it in to my MacBook running 10.6.4, I realized that it had one of those "Virtual CDs" that contained the manufacturers crapware, similar to Western Digital's MyWare or whatever its called. It shows up in disk utility as an actual separate disk and not just another partition that can be wiped.
    I reformatted the drive using GUID and and created 3 HFS+ Journaled partitions. One was going to be for the 10.6 installer, one for the 10.6 boot, and one for my time machine backup. I restored a 10.6 install dvd disk image I created using disk utility to the 10.6 installer partition (with erase destination checked) then option booted my mac and the partitions did not show up. The only thing I could see was my internal hard drive.
    I have done this many times before and it has always worked so Im trying to figure out what Im doing wrong. The only thing I can think of is that the "Virtual CD" that Hitachi put on this external drive is stopping the Mac from seeing the bootable partitions I created. I even went into system preferences>startup disk and blessed the 10.6 install partition. That didn't work either, the computer just booted to my internal drive.
    So my questions are. Is it because of this "Virtual CD" that I can't boot from my external drive? If so, is there a way around it? I already searched their web site and emailed their tech support asking for a firmware update to remove the virtual cd.
    Thanks in advance.

    Yes, it's a known issue. You've already referred to the issue with WD systems. WD has a long list of products that are either not compatible with Macs or won't boot a Mac.
    There are practically no problems with bare drives, but once installed in an enclosure there is no guarantee that the package will function as a bootable device. This is especially the case if the manufacturer uses some sort of "virtual" scheme intended for using the device as a sort of one button backup device.
    External drives don't have to specifically say anything about being Mac bootable or compatible. It's up to the consumer to verify compatibility and usability.

  • Can't install from application install dvd and i can't update to 10.6.8 after i restore my macbook pro from mountain lion

    can't install from application install dvd and i can't update to 10.6.8 after i restore my macbook pro from mountain lion. when restart and i press command it still has recovery mountain lion show on my screen.

    What model is the MBP? Did it come with OS 10.6 or a later OS? Is the install DVD one that came with it or something else?
    You can't run an OS older than Mac on it.
    But if came with 10.6 installed & you have the system discs, you should be able to erase the drive & reinstall the original OS.

  • Can you install Tiger onto a drive with data?

    Hello,
    I would like to ask if you can install Tiger onto a hard drive that already has data files on it. I have a 250 GIG hard drive and it already has 10 GIGs of data on it. Can I install Tiger on this drive or might it corrupt my files?
    Its a long story but here is a quick summary of why I am attempting to do this:
    I have a 350 MHz Blue and white G3 (rev 1) with two hard drives: the original 12 GIG ATA drive and a 250 GIG SATA drive (internal) connected with a 1S2 Seritek SATA controller.
    My 250 GIG drive has two partitions but only one is available to Tiger. You see, by accident I originally formatted my 250 GIG drive with an extremely small partion (32 Megs). I meant to type "30 GIGs" and by accident I typed "30 Megs". Oops That was supposed to be my OSX 10.4 volume. Its too late now - its too small. So I only have two choices for a place for TIger: my 12 GIG drive or the other partition of my 250 GIG drive. I am reluctant to choose my 12 GIG drive because it already has an older OS on it (OS 8.6).
    I was concerned about installing TIger on the data partition of the 250 GIG drive because that is where all my valuable data files are - 10 Gigs of data. I don't want to risk scrambling this data in any way.
    Is it safe to install Tiger onto this partition with my data files? Or is the possibility it might do something to my data.
    Its only a temporary install so that I could burn my 10 GIGs of data files to DVD for backup and then I will start all over again and erase the entire hard drive and reinstall from scratch onto the 250 GIG drive once my data files are safely backed up. (I will not partition the 250 GIG drive i nthe final install - it will be one big partition.)
    One other question:
    When you format a disk in Tiger are there options to "low level format" or "zero all data" or will just a straight "erase" do the job sufficiently? I bought my 250 GIG Hitachi SATA drive new and so I am not sure if it worth the time to re-erase it with "zero all data" (if that is an option in the Tiger Disk Utility). What is the best formatting option to prepare this drive in the most beneficial for Tiger?
    Thanks for any suggestions.

    Thanks scb and Jeff,
    Jeff, you have me thinking now. I think I will be safe and try another idea. I have a 4 GIG internal SCSI drive I could use to backup my data in 4 GIG sections at a time via my Adaptec 2430 SCSI card. I could then move this hard drive over to my other G3 onto its 40 GIG hard drive. This would be done three times to take off all my data and essentially provide a backup before I install Tiger. Good idea. You are right. It is better to play it safe.
    By the way 8.6 can handle HFS+. And yes, I should eventually buy an external drive solution - probably an enclosure. I saw one called "coolmax" [1]. It could hold a SATA drive and it had USB, firewire and also an external SATA port.
    And also Jef thanks for the info about formatting drives. I am glad to hear it is not important to zero all data if you don't have to. I am not concerned about havig anything to hide and so yes, I will just click "format" - that should be fine. Zero all data takes such a long time and I would rather avoid using it if I don't need this feature. Thanks for the advice.
    Thanks for the new safer direction.
    [1] Coolmax (CD-311-SATA Combo)
    Coolmax Aluminum USB 2.0 External Case/Enclosure for 3.5" SATA/IDE Hard Drives, USB2.0, IEEE1394a, Serial ATA triple interface input CD-311-SATA Combo
    http://www.iocombo.com/product/showproduct.php?productid=0EGD&PHPSESSID=3c41735b f27252cf17a17350cb603e0e
    $69.95
    http://store.yahoo.com/directron/35enclosure.html
    $53.99 at directron

  • CAN NOT INSTALL ON THIS HARD DRIVE

    I am currently running 10.3.9 on my 450 Mhz G4 which has 640 MB SDRAM but when I try to install my Tiger CD's (actually looking for the Archive and install option) I get a message that I can not "install Tiger on this drive". I own the CD's and actually have installed them on my wife's mac mini, so I know that the CD's are good. Thoughts anyone?

    Malcolm,
    'Will have to check with the previous owner of the mac mini as I do not know if they were purchased seperate from the mac mini or came with that HD. But, thankyou; as, I believe that you have me going down the right road.
    Bob

  • HP Pavilion 500-210 QE Can't boot from any hard drive.

    Good Evening. As you can see from the subject, my computer just can't boot from any hard drive that I put on it. I tried swapping the power supply, the SATA cable, resetting the BIOS, enabling legacy boot, changing from AHCI to IDE and RAID... 
    When I get to the BIOS setup, I can see the hard drive and its specifications, but it just won't boot or show up when I'm trying to install a new OS. I'm not an expert, but I think the problem might be in the motherboard SATA ports, but I'm not sure. Just to make sure, I did try another hard drive and it didn't work aswell. 
    I was also thinking about buying an external hard drive and instaling my OS on that, but I don't even know if that's possible and I would really like to have my computer working again.
    Thank you for your attention!
    This question was solved.
    View Solution.

    What is the installed operating system?
    Did you make a recovery disk set?
    Did you happen to make a  Windows 8.1 startup disk or USB recovery thumbdrive?
    Have you tested the hard disk?
    Press the power button and then immediately tap the Esc key. In the Startup menu, choose F2 for Diagnostics. In the HP Basic System Diagnostics menu choose hard disk. Run the test and post the results here.
    The issue you are facing has nothing to do with the SATA ports. It is a configuration issue. Your PC is a modern one and its BIOS (UEFI) is far more advanced than what you may have seen before.
    If you want to install a different operating system then you will have to make a few changes in the BIOS configuration. Secure Boot is turned on by default for Windows 8 and Windows 8.1. If you try installing a different OS without turning this off then your system won't boot up. You may be running into this if you are trying to install another operating system.
    The image below is  what will be seen in the BIOS of your PC in the security tab --> . In the secure boot configuration options do not clear the secure boot keys! Those keys are your operating system license activation keys.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Does mountain lion support install from a RAID drive?

    does mountain lion support install from a RAID drive?

    Apple does not support the 3rd party drives.  To enable it (without installing another software package), you can visit the website:
    http://digitaldj.net/2011/07/21/trim-enabler-for-lion/
    I ran the series of commands on my Mac Pro and it did enable TRIM.
    the webpage even has a backup/back-out procedure.
    Without TRIM, my computer was running extremely slowly.  After enabling TRIM, my computer ran substancially faster.

  • Can't boot from an upgraded drive

    Hi, I upgraded a 12" PowerBook G4 to a 160GB HD. The machine was running 10.4.11 on its original 60GB drive.
    The new drive formatted correctly (extended), and I clean installed OS 10.4 without a hitch. But on reboot, after the apple logo, I ended up with a solid blue screen. Tried an update to 10.4.11, and got the same result. I zapped the PRAM and still can't boot -- though now I start up with vertical pinstripes behind the apple logo, then a black screen.
    I've checked the new drive thoroughly with Disk Utility and Tech Tool, and no problems there. SMART status fine, same power requirements, etc. Boot ROM version is 4.9 0f0, which should support a 160 GB drive, if I'm not mistaken, but can't find any info on the Support site as to what the correct Boot ROM version should be to run with 10.4.11.
    I can boot fine from the original drive via a firewire enclosure, so no hardware problems with the G4.
    Any ideas? Thanks!

    Okay, I don't know what happened, but it seems to be fixed now.
    I migrated the old system files over from the original drive (hadn't wanted to, as I assumed a clean install would simplify things). After doing that, I got a kernel panic screen at startup, which after a blank screen, seemed like progress.
    Then I zapped PRAM and reset the PMU again, and voila. Everything is fine. If anyone has any clue what could've been better about a crufty old System folder than a fresh clean install of the same version of the OS, I'd love to know.

  • Can i install iCloud on a drive other than C:?

    I am installing i Cloud on a Windows 7  but do not have an option of putting it any where but C drive. How can i install it to another drive? I keeep my operating system on a small partition and install all my programs to a larger partition.

    Install it normally, launch it with the Shift key held down, and create a new library on the desired drive. The iTunes application contains system components and therefore must be installed on the drive or partition containing the OS.
    (95467)

  • Can I install a 1TB Hard Drive into a late 2007 17" MacBook Pro?

    Can I install a 1TB Hard Drive into a late 2007 17" MacBook Pro currently running a 160 GB Hard Drive?

    It depends upon exactly what you want to do with your Mac.  My old Late 2007 17" MacBook Pro only has 4GB RAM and it works fine.  It is a little slow if I am doing anything involving heavy computing (rendering video, compiling programs, etc.) but it works just fine.  In most cases, the increased RAM will help performance, but the cost can be fairly high with an older machine like you have.

  • Can I install a bigger hard drive on my HP Laptop dv9230us

    Can I install a bigger hard drive on my HP Laptop dv9230us

    Yes and in fact it can accept 2 hard drives. Any 2.5 inch wide SATA laptop hard drive 9.5 mm thick will work and those are available up to 1.5 TB I believe. To add a second hard drive you need a caddy and connector piece sold here:
    http://www.newmodeus.com/shop/index.php?main_page=product_info&cPath=2_5&products_id=131
    There is a link on the page above which will lead you to installation instructions.
    If you can give us some idea of what you are looking to do, we can link you to specific places to buy drives at good prices. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

Maybe you are looking for