Can I install Logic X and still use Logic 9?

Id like to buy and install Logic X but I would like to keep Logic 9 on my Mac.  Is this possible and if so, how do I install Logic X so that it will not "over wri

They are different apps, so Logic Pro 9 will remain in the hard drive after installing Logic Pro X. See > https://discussions.apple.com/message/22494912#22494912

Similar Messages

  • Can I install InDesign CS6 and still keep my InDesign CS5 active?

    I have addons in InDesign CS5 that is not compatible with CS6. Can I buy an SC6 subscription (Adobe Creative Cloud) and keep my Adobe InDesign CS5 with addons active (and activated)??

    Honestly its hard to say , becuase it is not just the plugin but the complete suite in itself ,
    First , Post your query on Indesign Forums , there you will find Indesign Expert who will let you will there be any conflict because of this on your CS6
    Secondly, If I would have been at your place, I would have installed the CS6 trial first , used it and tested and if it would have worked , then I would have purchased it.

  • Can you install Lion server but still use the mac as normal?

    I have a Macbook Pro and I would like to install Lion server. I was wondering if when I buy it off the mac app store if it works like any application so I can like close out of the server and use the mac as normal like to get on the Internet, or if Lion server installs like a new operation system and I can't use my mac as normal?
    Thanks
    WirelessCharge

    Welcome to the Apple Support Communities
    Of course. On Mountain Lion and Lion, Server is just an app, so you can close it and turn off its services whenever you want to use your Mac as usual, although you don't have to close Server app to use the computer as normal

  • Can I mute incoming calls and still use as a voice recorder

    I need to take notes during meetings and would like to use an iphone as a voice recorder as a back up as well as taking written minutes. Can I put the iphone into a silent mode so that the meeting is not disturbed if I get a call or SMS but still be able to use the voice recorder? I would like to be able to press record at the start of the meeting and just leave it running for the duration.
    Also, if I fully charge the battery before, will the iphone keep recording for 1.5 hours?
    And.. what is the best voice recording app for meetings and lectures/talks?

    Hey
    It sounds like you're looking for airplane mode, which disables the wireless features of your iPhone while still allowing you to use other applications. You can read more about it here:
    iOS: Understanding airplane mode
    http://support.apple.com/kb/HT1355
    Also, the iPhone comes with an application called Voice Memos that lets you use iPhone as a portable recording device. You can read more about it on Page 105 of the iPhone user guide here:
    iPhone User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf#page=105
    Cheers,
    David

  • My husband has a iphone, now i have one to. We want to work with the same calendar, but i want to play in the game center with my own name... how can i do that? and still use the same calendar

    My husband has a iphone 4 8Gb, now i have one to. We want to manage our calendar with icloud. We use the apple id that my husband made, but i want to play in the game center with my one name and games. How can i do that?

    Sounds like you encrypted your iPhone backup, & if so it's asking for the encrypted backup password. Do you have a company Exchange account on your phone?

  • IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive?

    IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive - which is still working? I took it to the Apple store and they quoted $500+to replace the monitor. No help as usual. Can I buy a MAC compatible monitor ($189) and use it as a primary monitor? Can I set it up if the screen on the IMAC is dead? Any other solutions?

    The only negative to not having the original drive will be the work needed to reinstall all the apps and reconfigure to your liking. You will also have to decide whether to stay on Lion (which you should update to 10.7.4, BTW) or bite the bullet and take a leap of faith on Mountain Lion.
    In either case, to simplify matters you would do well to concoct a Lion or ML bootable installer on a USB stick. In either case, you need to get the corresponding installer downloaded onto the hard drive and, instead of running it to execute the install, extract the coveted InstallESD.dmg image from which you construct the bootable installer. See here for details: https://discussions.apple.com/message/17782820#17782820  The procedure applies the same to both of the latest cat flavors.

  • Hi, I activated my CS6 in 2012 under my student licence and still using it. I've heard that you can't run CS6 on multiple computers. How do I transfer it from one computer to another as I am switching computers?

    Hi, I activated my CS6 in 2012 under my student licence and still using it. I've heard that you can't run CS6 on multiple computers. How do I transfer it from one computer to another as I am switching computers?

    Hi,
    first, I'm not Adobe's "slave" as you might to accuse me. Most of the posters here are users like me.
    I only can repeat that what I found in Adobe's help sites, as I wrote above. You are free to figure out the "real" truth and - the best would be - you may contact Adobe directly, here are - I'm sure you know them -  the links I would use: http://helpx.adobe.com/support.html  and http://helpx.adobe.com/contact.html.
    Hans-Günter

  • Can I stream a movie from my Macbook to my Apple TV on one display, and still use my Macbook for other things?

    I have a Macbook Pro and an Apple TV. What I'd like to do is stream a movie from my CinemaNow Account to my television by using my Apple TV and my Macbook. I know that I can do this my using the mirroring feature, however then I can no longer use my Macbook for anything else because my TV will only display what is on the screen of my Macbook. Now with this is mind, what then is the point of having multiple displays through the use of my Apple TV, if only one display can be used at a time unless they both show the same image? Or is there a way for me to be able to stream the movie to my TV and still use my Macbook for other purposes (multi-tasking)? 

    To enable a second display over AirPlay, you first need to be connected to the same network as your Apple TV. Next, open System Preferences > Displays, and select your Apple TV from the “AirPlay Display” drop-down menu.
    Once you do this, your display may flash as the second display connection is acquired, and the Apple TV takes over as the second display. If the displays are mirrored, then you can correct this by opening the “Arrangement” tab in System Preferences > Displays, and ensuring that the “Mirror Displays” checkbox is unchecked.
    In this same “Arrangement” tab, you can move the displays around in the pane to ensure that they're positioned correctly, relative to your physical space (usually side-by-side, or top-down). The primary display here is denoted here by the Menu bar on the display. The arrangement helps with being able to drag windows from one display to the next: if your secondary display is arranged to be to the right of your primary one, for example, you can drag things to it through the right side of your primarcy screen.

  • HT5922 Can I airplay a movie from safari on my MacBook to Apple TV and still use the computer for something else at the same time?

    Can I airplay a movie from safari on my MacBook to Apple TV and still use the computer for something else at the same time?

    Hi frogjt,
    Welcome to the Apple Support Communities!
    Great question! You can absolutely do this in OS X 10.9. The attached article explains how the process of using AirPlay with Apple TV to create a second display. Also, towards the bottom of the article there are instructions on how to set your Displays preferences on the computer to make sure the TV and MacBook Pro displays are set up the way you want them to be.
    OS X: Using multiple displays in Mavericks
    http://support.apple.com/kb/HT5891
    Have a great day,
    Joe

  • Can I keep photos on external hard drive and still use iPhoto?

    I have virtually no space left on my eMac's 80GB hard drive. For a long time, I have kept my sizable iTunes library on an external hard drive connected to the eMac. It takes a bit of extra time to open up the iTunes library and to upload music from newly purchased CDs, but generally the external hard drive and eMac perform well together. My question is: Can I do the same with my photos (put them on the external hard drive) and still use iPhoto to access them and edit them? I have checked some of the Apple knowledge base documents, and there seem to be warnings against this. I am currently using iPhoto 6.0.6. I have purchased iPhoto 7.0 (with iLife '08) but haven't put the new software on the computer because there is not enough space. I would like to straighten out this space problem and get the benefits of the new software. (I have backed up quite a few of the photos onto CDs, but I like to have them handy--therefore on the eMac or on a hard drive connected to the eMac.) Thanks ahead to anyone with some good ideas on this topic.

    winesmile
    Yes it is, but you cannot access the at the same time as iPhoto can only open one library at a time.
    So, a solution might be to have the entire library on the external, and to carry the smaller subset on the laptop.
    To do this, follow the instructions above to move the library, but instead of deleting the library on the laptop (in the final step), put the pics from the earlier years into the iPhoto trash and empty it. (iPhoto Menu -> Empty Trash. Hint: Don't so them all at one go! Better a few a a time.)
    Now you have the full library on the external (and if you want to access the full library, use that) and the 07 & 08 years on your laptop.
    To switch between libraries, simply hold down the option (or alt) key when launching.
    As you add photos to the Library you can use iPhoto Library Manager to move pics and albums /events between libraries, and so keep them up-to-date with each other.
    Please note this is the only way to sync the libraries, there is no app that can do this automatically.
    Regards
    TD

  • HT201343 can you mirror say desktop 2 and still use your mac on desktop 1 with the movie playing on the tv?

    I'm interested in Apple TV for the mirroring feature through AirPlay, but will only purchase if I can still use my mac as normal whilst i'm watching what is being mirrored on the tv. Is this possible in any way? like possibly having the movie playing on desktop 2 and mirroring that and still use the mac with the other desktops to browse the internet etc?

    No, AirParrot isn't a solution for dexta,
    AirParrot gives mirroring function to older computer that are unsupported by the Apple's mirrorring function.  Dexta is looking to extend is display which isn't a feature of AirParrot.
    AppleTV will only gives you direct access to some web content using the builtin features like YouTube, Netflix, etc.  If you are looking for unsupported access to other website without using mirroring, then the AppleTV isn't the best hardware to answer your need.

  • I installed Firefox sync and then used iphone app called FireFox Home and I can syncronize history, tabs and bookmarks. But I am NOT able to syncronize passwords from Firefox in my Macbook to FireFox Home on iPhone !

    I installed Firefox sync and then used iphone app called FireFox Home and I can syncronize history, tabs and bookmarks. But I am NOT able to syncronize passwords from Firefox in my Macbook to FireFox Home on iPhone so I am very terrible to input my IDs and Passwords with my hands on FireFox Home when I log into Facebook, Twitter etc... Is it issue or something like that? If you have some solutions to make it clear, can you tell me how to syncronize memorized IDs and Passwords for the webs. Thank you.

    You can look in Tools > Options > Sync
    Menu differences: [http://kb.mozillazine.org/Menu_differences Windows: Tools > Options - Mac: Firefox > Preferences - Linux: Edit > Preferences]
    See also:
    * [[What is Firefox Sync]]
    * [[How to sync Firefox settings between computers]]
    * [[How to sync Firefox between my desktop and mobile]]

  • Can i unplug time capsule from the ethernet cable and still use it??

    can i unplug time capsule from the ethernet cable and still use it??

    I have tried to extend that wireless line but as soon as i remove the LAN cable i have no internet connection anymore. So basically, does the TC get the signal wireless from the router??
    The Time Capsule can wirelessly extend a wireless signal....but only if it is being provided by another Apple AirPort wireless router.
    If the "main" rotuer there is not an Apple AirPort router,  you will need to connect to the network using a wired Ethernet connection.

  • Can I stop the iPhone from surfing the internet and still use the "find my iPhone" option?

    Hi. Can I use my iPhone without causing internet-costs? I have got a prepaid-card and my iPhone uses the internet all the time - that costs a lot of money. So can I stop the iPhone from surfing the internet and still use the "find my iPhone" option?

    Find My Phone REQUIRES an internet connection in order to work. Either WiFi or Cellular Data. So, if you turn off Cellular data, you're defeating Find My Phone.

  • Can I have a custom RTP payload, and still use a MediaLocator?

    Hi,
    I think I am a little confused. Can I have a custom RTP payload, and still use Manager.createPlayer(MediaLocator locator) to create my player?
    This doesn't seem possible because the RTPManger's addPayload(Format format, int payloadType) method isn't static, forcing me to always create my RTPManager first.
    Is this a valid observation, or am I missing something?
    Your comments are highly appreciated.
    Kind regards,
    Erwin

    Thanks for your prompt reply.
    The short answer is yes.
    The MediaLocator is used to identify the source, or destination for a media stream. For example this could be a file (file://c:\mydisk\audio.wav) or a URL (http://mydomain/music/audio.wav)
    Ok, I get that, but the MediaLocator is also used to identify the protocol, rtp in this case, and the protocol in its turn is used by the framework to locate the DataSource. I am not suggesting what you write is incorrect, I am only trying to understand how this works the way it does.
    RTP is used to transport streaming media in real time over a network (usually UDP).And that is exactly what I need it for.
    The receiver of an RTP stream is an RTP receiver. Players take the datasource(created from the MediaLocator) and feed the data to the RTP manager so it can be streamed across the network or vice versa.
    The vice versa part is what I am interested in. I need to handle a proprietary video format, packed as RTP, and shipped over UDP. My initial approach was to simply register my DePacketizer with the PlugInManager, and add my custom payload type to the RTPHandler (addFormat(Format fmt, int type)). That obviously doesn't work.
    So what I'm trying to convey is that the MediaLocator used in creating a Player will be different, and is used for a different purpose, than the Internet address, and Port used to create an RTPManager.I need a good night of sleep to think that over. I.m.h.o. there is no reason to handle "http://host:port/video/whatever.ext" different from "rtp://host:port/video/whatever.ext". The only difference is that in the first case I can build my graph based on the extension of whatever, and in the second case I have to wait for my first packet in order to determine the payload type. In both cases I expect "DataSource ds = Manager.createDataSource(ml) to work (and it probably does for the standard payload types).
    The JMF framework has a .../media/protocol/rtp/DataSource class as well as a .../media/protocol/http/DataSource class.
    Is this making any sense?Not sure yet, but I certainly appreciate your help.
    Note: In general you don't need to create a custom Payload for RTP.
    What if I want to ship a proprietary video format?
    Thanks a lot,
    Erwin

Maybe you are looking for

  • Barcode not displaying/printing in Crystal Report java viewer

    We have written a Crystal report (in Developer XI release 2 with service pack 4 installed) which produces barcode labels.  The barcodes are Code 39 barcodes and are generated by printing the string \*data_field\* in a Code 39 barcode font.  The aster

  • Parser for Java v2 decimal formatting bug

    XML Parser for Java v2 (up to 2.0.2.7) does not seem to format decimal numbers correctly with format-number() function. It can handle floats, but not doubles. When can this bug get fixed? BTW, is there a bug database for Java XML Parser? Thanks, null

  • Recommendations for a Bluetooth iSynch-capable cell phone Not Motorola

    Hi all, I am in the market for a new phone that willl enable me to interact with iCal and Address Book. I have always hated the Motorola menu systems, currently have a Sony Ericcson Z500, and had great success a long time ago with Nokias in the Winte

  • Why does my yellow bar in itunes use 8.1 gb

    my yellow bar on my itunes says im using 8.1 gb...ive deleted all my emails and close to all my texts...ive deleted 1,000 photos and almost all of my apps and nothing has changed...so frustrated!!! HELP!!

  • What do I need to post online video of digital art being created?

    I have yet to use my iMovie 09, so utter newbie with that program. I want to post video online of my desktop as I create a painting in Corel Painter. I see the videos of other artists who are doing this, where you view their desktop, and watch art cr