Can I install Windows 7 off a usb on my late 2011 MacBook Pro?

Is there any way to boot off a windows 7 usb install disk?

"Generic" OEM is full verion, minus the "install as many times as you want" option. Usually after 3 different CPUs you need to beg MS to reactivate OEM.
What you cannot do is install an OEM designed for a specific machine (a set from a Dell or a Asus or Toshiba). Those install disks have ONLY device drivers and setups for those specific machines.

Similar Messages

Can i install OS X Snow Leopard on my Early 2011 MacBook Pro 13' ?

Hi guys , just wondering can i install on my Early 2011 MacBook Pro 13'' OS X Snow Leopard ? i dont like Lion at all . Many Thanks .

You may be able to install SL 10.6.8 (assuming there was no firmware update) if you follow these directions. Check with MacTracker http://mactracker.ca/ and download their free app detailing more info you ever thought you needed to know about Apple products.
- you can re partition partition the mac drive so that you can retain the pre-installed lion install
- or use an external drive
- attach your computer via firewire 800 to a Mac computer (capable of running 10.6.8 )
- boot the your computer holding down the T key to get it into target disk mode, it will appear on desktop as an external drive.
- install SLS v 10.6.3 Retail version from the DVD onto the new partition or external drive where you want Sl installed.
- install the 10.6.8 combo update.
http://support.apple.com/kb/DL1399
- Install Thunderbolt Software Update (Snow Leopard) v1.0
http://support.apple.com/kb/DL1452

Can I install two different RAM sizes in my Early 2011 Macbook Pro 2.0 GHz

I just bought me a 8 GB 1333 Mhz RAM for my Macbook Pro. I installed it in slot 2 and I installed the stock 2 GB RAM in slot 1. Is my decision good to have two different sizes RAM in my computer. It is showing me I have 10 GB RAM in my system, and I think my computer has become little faster, but t I had expected that it would be much more faster since I have 10 GB instead of 4 GB.

Boysovereign,
the speed of your MacBook Pro will only increase by installing additional RAM if the apps which you run were constrained by their previous amount of RAM. If they weren’t being constrained by the previous amount of RAM, then adding more RAM won’t affect the speed at which they run.
That being stated, you’ll suffer a minor performance hit by using two memory modules of different capacities; to maximize your MacBook Pro’s performance, you should install two memory modules of the same capacity.

What is the maximum amount of RAM I can install in a late 2011 Macbook Pro 17"?

What is the maximum amount of RAM I can install and will be suported in a late 2011 Macbook Pro 17"?
Thank you,
Patrice

http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i7-2.4- 17-late-2011-unibody-thunderbolt-specs.html
Although Apple states a maximum of 8 GB, OWC (macsales.com) has tested 16 GB, so if you want to install 16 GB, I'd go with OWC as they tested it and do guarantee their RAM to work with Macs.

How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.

How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.
I have Boot Camp 5.1.2 (497) and there is no option for installing using USB. I have downloaded an image of Windows 8.1 already.
I can't install using DVD R/W because it's not working.
Please help me.
Thank you.

unlocked by myself
thanks

How can I install Windows 7 by USB? MacBook late 2008 10.6.8 Boot Camp 3.0.4

Someone please help...
I have tried software update and no luck. I think my Boot Camp on Mac 3.0.4 is not showing me the right option on creating a USB installation. It asks me to load Windows 7 CD when I don't have it, I bought it online... Every download I tried from Apple is .exe and I am losing hope on this one...

You can only install Windows from a USB with one of these Macs:
- MacBook Pro with Retina display.
- Mac mini (Mid 2010 and later).
- iMac (Late 2012).
- MacBook Air.
If you bought Windows in Internet and you got it in a ISO image, you can burn it into a DVD. Simply double-click the ISO image, open Disk Utility, right-click the ISO image in the sidebar and burn it

Late 2011 MacBook Pro can't boot after Yosemite install

After installing Yosemite on this late 2011 MacBook Pro it stops about a third of the way into booting up. It displays a null sign. I can boot into recovery disk, or external HD (I don't have a backup of this system, but can boot from my MacBook Air's clone) if I use option-R or just option at startup. It won't go into Safe Mode. From the ext HD I have reinstalled Yosemite on the MBP, but it still freezes mid-boot. Disk Utility repair permissions, repair HD, zap PRAM, SMC, I've tried all of these (from reading advice here, and PM from Ogelthorpe). I have copied the Etre Report below. Suggestions?
EtreCheck version: 2.1.8 (121)
Report generated March 24, 2015 at 2:16:55 PM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Late 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.4 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 431
Video Information: ℹ️
    Intel HD Graphics 3000
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.3 (14D113c) - Time since boot: 0:25:56
Disk Information: ℹ️
    ST9500325ASG disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) /Volumes/Macintosh HD : 498.88 GB (345.40 GB free)
            Core Storage: disk0s2 499.25 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Western Digital My Book 1140 2 TB
        EFI (disk2s1) <not mounted> : 210 MB
        MBPClone (disk2s2) /Volumes/MBPClone : 249.35 GB (119.30 GB free)
        Recovery HD (disk2s3) <not mounted> [Recovery]: 784 MB
        Clone27iMac (disk2s4) /Volumes/Clone27iMac : 1.08 TB (918.40 GB free)
        Recovery HD (disk2s5) <not mounted> [Recovery]: 650 MB
        MediaorWhatever (disk2s6) / : 665.53 GB (583.65 GB free)
        Recovery HD (disk2s7) <not mounted> [Recovery]: 650 MB
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.ricoh.print.kext.USBPrintClass (3.01) [Click for support]
        /Volumes/MBPClone/Applications/DiskWarrior.app
    [not loaded]    com.alsoft.Preview (4.4) [Click for support]
        /Volumes/MBPClone/Library/Sophos Anti-Virus/InterCheck.app
    [not loaded]    com.sophos.kext.sav (8.0.14 - SDK 10.5) [Click for support]
Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    net.culater.SIMBL.Agent.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.bombich.ccc.plist [Click for support]
    [running]    com.bombich.ccchelper.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.transcend.TSTRIMHandlerHelp.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    WD Quick View    Application (/Library/Application Support/WDSmartware/WDQuickView.app)
Internet Plug-ins: ℹ️
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Flip4Mac WMV Plugin: Version: 2.3.2.6 [Click for support]
    OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
    AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Silverlight: Version: 4.0.50917.0 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
    QuickTime Plugin: Version: 7.7.3
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
    AdobePDFViewer: Version: 10.1.13 [Click for support]
    Scorch: Version: 6.2.0 [Click for support]
    DirectorShockwave: Version: 12.0.7r148 - SDK 10.6 [Click for support]
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    Perian [Click for support]
    WDQuickView [Click for support]
Time Machine: ℹ️
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
    Destinations:
        MBP Backup [Local]
        Total size: 299.73 GB
        Total number of backups: 20
        Oldest backup: 2013-03-14 16:58:24 +0000
        Last backup: 2014-02-25 16:24:25 +0000
        Size of backup disk: Excellent
            Backup size 299.73 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
         5%    WindowServer
         3%    mds
         0%    AppleSpell
         0%    fontd
         0%    mds_stores
Top Processes by Memory: ℹ️
    249 MB    mds_stores
    150 MB    Finder
    116 MB    Dock
    116 MB    Spotlight
    73 MB    ocspd
Virtual Memory Information: ℹ️
    801 MB    Free RAM
    1.59 GB    Active RAM
    785 MB    Inactive RAM
    1.09 GB    Wired RAM
    2.01 GB    Page-ins
    446 KB    Page-outs
Diagnostics Information: ℹ️
    Mar 24, 2015, 01:44:49 PM    Self test - passed
    Mar 22, 2015, 10:30:37 PM    /Library/Logs/DiagnosticReports/VideoMemoryTool_2015-03-22-223037_[redacted].cr ash

Drive Partition and Format
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Quit DU when it is finished and return to the installer. Install Snow Leopard. Download and install Mac OS X 10.6.8 Update Combo v1.1.

Windows 7 install on late 2011 MacBook Pro without bootcamp (performance issues)

Hey guys I'm hoping I can get this issue resolved. I have purchased a late 2011 MacBook Pro (radeon 6750m 1gig). I installed a fresh copy of windows 7 without bootcamp. Having real issues with game performance like world of Warcraft. I have done this with an older unibody Mac and it ran great (for any non believer)... But now this time around I'm getting horrible fps in game. I'm thinking it may be driver related it buy I am having trouble finding the right drivers to see if that's then issue. Any help on this would be greatly appreciated.

Shotgun00 wrote:
That is completely false. There is no real need to leave OS X on the Mac if you don't want to, especially with Win 7 or 8. That may of been true with Windows XP but not anymore.
The problem with leaving OS X installed is then you are really limited with what you can do with the drive. You can only have one Windows partition and if you fool with it at all Windows will no longer boot. you can't even change the OS X partition otherwise Windows would boot
Windows 7 will install all by itself. No need for any Boot loaders or Hack Boot system. Pop the Win 7 DVD in the DVD drive and restart. Windows will be installed all by itself. But you do need the Apple support files.
In the end if you are going to run Windows on a computer by itself then you really should not buy a Mac. The hardware is the same and as to the OPs perceived better built quality I personally do not see it. And if you actually read some of the posts on this and other Mac forums you will see that perceived build quality is just a bunch of hype, in my opinion.
To the OP. You aren't missing anything.
If you had carefully read what I wrote, I merely said that doing the install on a blank drive wasn't a good idea. That's because it can create issues the OP is having. A Mac's hardware is no different than a comparable Windows machine, but the EFI/BIOS/Firmware is. Macs are in something of a no-man's land in this regard, as they have neither an old-school BIOS or modern UEFI of recent Windows-based notebooks. I'm willing to bet that the performance problems the OP is having relates to the fact that a straight EFI install on a modern MBP "enables" (for lack of a better word) automatic graphic switching. The capability manifests, but the functionality is not there. Enterprising individuals have been trying to get graphic switching in Windows to work as it does on the OS X side ever since MacBooks debuted with this abliity but with zero success.
Using Boot Camp bypasses this, as the discreet GPU is enabled full-time in Windows. Thus, you will realize proper performance.
As far as perceived build quality, Apple machines are at the high end of the consumer notebook spectrum. They're certainly better than most of the other machines you can pick up at your local Best Buy, but they fall short of business-class machines such as the Dell Latitude/Precision, HP ProBook/EliteBook, and Lenovo ThinkPad.

Can I install to G4 iBook via Target mode from a MacBook Pro?

Can I install to G4 iBook via Target mode from a MacBook Pro? I have a non functioning iBook DVD Drive but want to do a clean install. Can I use the FW/Target mode to install? If not what can I do to install w/o the OD not working?

was this a std size disc or a funky shape / small cd of some type?
you will have to pull the machine apart, pull the slot drive, & take all the brackets / slot cover off the front of it (where you put the disc in). you can they try pushing down on the mechanical works (holding the drive as it sits in the ibook & face into the slot where you would put the disc in).
otherwise, you will have to take the drive itself apart, usually taking all the screws off around the outside & pulling the metal cover off will get you in to where you can force or pull the disc out.

How can i drag videos off of my iPhone 5 onto my MacBook Pro?

how can i drag videos off of my iPhone 5 onto my MacBook Pro?

you'll need to import them
try using iPhoto, if you don't have iPhoto then you can use image capture. If you can't find image capture type it into the finder.

I have a late 2011 macbook pro i want to reinstall os lion 10.7 so when i reboot hold down options key click on recovery hd then in the os x utilities screen it says reinstall mac os x is there any way i can save this download so i can burn to dvd

i have a late 2011 macbook pro i want to reinstall os lion 10.7 so when i reboot hold down options key click on recovery hd then in the os x utilities screen it says reinstall mac os x is there any way i can save this download so i can burn to dvd

steve359 wrote:
Sorry ... I read but was unfortunately distracted from your original post. You have a system that came with Lion. The Lion that is on your system is only for your computer and cannot be downloaded from the app store again because you never purchased it officially through the App Store.
Try this for making an external USB/DVD copy of Recovery on an external disk. internet is still required for reinstall, though, I believe: http://support.apple.com/kb/HT4848. But at least you have a separate Recovery Partition if you ever need a fully new and empty internal disk.
Your assumption is incorrect. Although he may not be able to download it from the App store he can download it directly for the Apple servers using the recovery partition on his original drive.
All you have to do is start the install routine and then point the install to an external hard drive. Once the download is finished the computer will reboot to start the install. At that reboot disconnect the external drive so the install can not start. Boot the computer back into the OS on the internal hard drive, which is what will happen automatically once the external drive is disconnected. Then connect the external and copy the files from it that were downloaded. Right click on that downloaded package file and select Show contents. In the contents of that package is a file called InstallESD.DMG. Copy that file out of the package and burn it down to a DVD or USB thumb drive and you now have the Full Lion Installer. I have several of them laying around on different hard drives and 2 USB thumb drives which I have used to reinstall Lion on my 15" MBP.
Sorry OP I should of just typed this out in my first post.

I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed. Error message: Panic CPU 0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platfor

I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed. It instructed me to hold power button to shut off and then press again to restart. Same error message keeps coming up and computer won't boot to home screen.
Error message:
Panic CPU 0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platform
\"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platformexpert.cpl:150 4
Debugger called panic
Kernal uuid a8ed611fb0f-3729-8392-e7a32c5e7d74
THANKS FOR ANY HELP.
ROBB

Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective.

13" late 2011 MacBook Pro has frozen after Yosemite installation. I can, however, boot from a clone of my MacBook Air that is on an external drive. Despite the fact that I can boot from the external, could it be the RAM that's the prob

My daughter's 13" late 2011 MacBook Pro has frozen (null sign displays) after Yosemite installation. I can, however, boot from a clone of my MacBook Air that is on an external drive. I reinstalled Yosemite on the MBP HD, but it still hangs in mid install. Despite the fact that I can boot from the external, could it be the RAM that's the problem? I'd happily put 8 GB in if it seems probable that would solve the problem. I've tried all the suggested procedures that I've seen posted here. Disk Utility, and my older version of DiskWarrior indicate the HD is OK. I have DiskWarrior 5 on order.

Boot the MBP with the OPTION key down. If successful, you should see two HDD icons, Select the recovery partition (on the right).
From the 4 option menu select Disk Utility.
Run Disk Utility>First Aid, Verify and Repair.
If the disk cannot be repaired, it will have to be replaced.
Ciao.

I have a late 2011 macbook pro and it wont update the firmware to 2.7, it downloads the update then says its installing it but when i go back to software update it keeps coming up saying it needs to be updated

I have a late 2011 macbook pro running OSX Lion, and it wont update the firmware to 2.7, it downloads the update then says its installing it but when i go back to software update it keeps coming up saying it needs to be updated. Im wondering what can i do to stop this or get it to update.

Once it is downloaded you need to restart the computer if it does not restart automatically. When it next starts up you should note a progress bar appearing below the Apple logo. When done the computer will restart once more. The new firmware should now be installed.

Late 2011 MacBook Pro stuck at spinning wheel of death after a Thunderbolt issue, HD erasing and fresh Lion install from Recovery HD. Please help me!!!

So, I think the title says it all, but to give you a little more info:
I connected my late 2011 MacBook Pro to my TV using a Thunderbolt HDMI adapter, and closed the lid. When I opened it, it wouldn't show the login screen, so I restarted using power button. Got stuck at the Apple logo with the spinning wheel. So I booted the Recovery HD and found out it was a HD problem, so I (reluctantly) erased the HD and installed Lion from scratch. When it rebooted (after DOWNLOADING the Lion components) I got some terminal commands (sorry for not being more specific, still a noob when it comes to Mac) and then the screen faded and a message appeared saying I needed to reboot the computer. So I did. 3 effing times. Then I got stuck AGAIN at the spinning wheel, and I'm currently with that on my screen. I'm trying the forums before calling Apple (my computer's still within the 90 days of warranty) because it's not yet 9 A.M. where I live

can you go back to recovery mode then open disk utility.
in disk utility, higlight the disk, the one saying the brand and size then click on repair disk under first aid tab
if it repairs fine, that's okay
if repair was not successful, go to partition and change current to 1 partition then apply
install lion again
hope this helps

Can I install Windows 7 off a usb on my late 2011 MacBook Pro?

Similar Messages

Maybe you are looking for