Can I jump between two presentations without exiting presentation mode?
is it possible to quickly jump between two separate presentations without having to go out of presentation / play mode ??
OUCH! Random access in Keynote is difficult. It is essentially a linear presentation format. However, IF you want to do this only once, there might be a workaround:
Create a slide in presentation A that has a black rectangle that covers the entire slide; it could be any slide number, but most likely should be the last slide in the presentation to make it easier to find in a hurry. Make this your Hyperlink to presentation B. (see previous response)
Then, while showing presentation A, when you want to go to B, press the = (equal) key to display the slide selector on the preview display monitor; select the Hyperlink slide and go to it; click on the slide and that will trigger the hyperlink to B. By the way, it will look better if the first slide in presentation B also is all black to mask the transition.
The problem, however, will be returning to A where you left-off. There is another workaround for this. First create another black slide and make this #1 in presentation A. Then create a hyperlink at the end of B that will take you back to A, slide 1. Again, use the slide selector to take you back to the slide where you left-off previously. (When you first leave presentation A, be sure you know which slide number you left, so that you can return there (or the next slide) when you come back.)
Yes, it is cumbersome. Yes, it will not be seamless: there will be some pauses while you are selecting the proper slides and making the transitions. Yes, it should be easier. And, yes, it will be even more difficult to do this more than once (if you can do it at all) in a presentation.
Good luck.
Similar Messages
-
Send videos between two iPads without service?
Can you set something up, like a local network, so that you can send videos between two iPads without cell service or an internet connection?
Unfortunately no.
-
Count days between two dates without weekend
Hi,
I need a solution in query or another thread, that returns the count of days between two dates without consider weekend (saturday and sunday) , I have the columns of type Date, and the return need in format of hours in one column hh:mm:ss and days in another column.
Regards
JonasHi and welcome to the forum.
Keep in mind that you can do a search on this forum.
Your question has been asked before.
Some other pointers:
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551242712657900129
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:185012348071 -
How can we navigate between two windows of same component in webdynpro ABAP
Hi
how can we navigate between two windows( not views ) of same component in webdynpro ABAP. its an urgent requirement
Thanks in advance.
Regards
LaeeqHi Laeeq,
You cannot navigate between windows of one component. You can only call a dialog box showing the contents of a second window, or you can embed the contents of a window of a different component.
Just add all the views you need to the one and only main window of the component.
Ciao, Regina -
I have duplicate pictures in "my catalog" that I believe come from two Adobe folders found under "my pictures/adobe/ one is Revel and the other is Photoshop express which preceded revel. Can I delete those two folder without causing a problem with my catalog?
Thanks for the links, Limnos.
If you are willing to continue helping, here's what I found.
Just to clarify the two iTunes folders I am refering to are:
username-->Music-->iTunes
HD-->iTunes
I am presuming each location has a full set of files as outlined in the above links?
Not all the files are in both locations. Most are.
- The Itunes folder in my home folder does not have itunes library.xml.
- The Itunes folder in my home folder has a subfolder called Mobile Applications (username-->Music-->iTunes--> Mobile application). The Itunes folder at the HD level also has a Mobile Application folder but it is a subfolder of Itunes Media folder (HD-->iTunes--> iTunes Media-->Mobile applications) and has no files in it.
- I do not have an iTunes Media in the iTunes folder in my home folder.
- also the Itunes media folder (HD-->iTunes--> iTunes Media) has subfolders by type (books, movies, itunes u, music etc...) but the iTunes Media-->Music also has some of the same subfolders ( iTunes Media-->Music-->books, iTunes Media-->Music-->Movies, iTunes Media-->Music-->iTunes U). Is this normal repetition?
You say:
/itunes/itunes media/ music
but it is important to note what comes before all that.
There is nothing as far as I can tell before that first forward slash. Since the only iTunes Media folder I have is in the iTunes folder that resides at the HD level (HD-->iTunes--> iTunes Media folder) not the iTunes folder in my home folder (username-->Music-->iTunes) , I assume that's the one that holds the music.
Keep iTunes media folder organized and Copy files to iTunes Media folder when adding to library are both checked on
Does that give more clarity into my problem? -
Can you move between text boxes without using the mouse?
Can you move between text boxes without using the mouse? When I have mutliple text boxes as a template, and then need to move from one to the next can I do it without having to use the mouse to click the next box??
Jon,
Option-Tab will sequence through the tables.
Jerry -
How can I communicate between two simulated software
Hallo,
I have confusion regarding this topic "How can I communicate between two simulated software".
1: PC with CAN simulation
2: PC with AFDX Simulation
Now i have to communicated these two pc with each other.
How can i communicated? which module from ni is best for it.
thanks in advance
BRI recommend looking at the Simple Messaging Reference Library that NI has released. Use the TCP/IP version of it.
FYI, TCP/IP is a communication protocol that is used to communicate between two computers. It is what the internet uses. So you just need a network switch or router between your computers and you can talk to each other with their IP address.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Can you text between two iPod touch iPods and is it free?
Can you text between two iPod touches and is it free? Is it free to text from Canada to US?
Yes and yes. Both iPodsneed to have iOS 5 installed.
-
I am looking for the best way (or any way) to interact between two different frames in the same indesign template as well as from one template to another. It's for a DPS app which needs to carry some button initiated data from one page to another and then present it in a table.
There is no simple way to do it, as itunes wont let you use it on another computer without wiping the contents first.
However if you really want to transfer songs to another computer then you could try this;
* make sure that your ipod is accessible as a disk drive (ipod options)
* when you plug your ipod into the computer you want to transfer to make sure you select "no" or "cancel" when it asks to wipe the contents. Leave the ipod connected and quit from itunes.
* go to "my computer" and access the ipod directly. You probably have to select "view hidden files" from windows. You will see a lot of folders with odd names like ZX838aff with similar named files inside.
* copy these files to a folder on your computers hardrive. Now remove the ipod and start itunes.
* import the files from the folder you made in the last step.
* Now your music is on itunes, but with unrecogisable names.
This is the only way I have found to do it, but there may be another way, say with an application to do the hard work for you.
Generic homebuild PC Windows XP
Generic homebuild PC Windows XP -
Can I run a presentation without the presenter display?
Here's the setup: Mac Mini in the office attached to a 32" Sony Bravia on the wall outside the office and a 19" LCD locally. I'd like to run a slideshow out on the Bravia, but maintain my desktop inside. I can disable the 'Use alternate display to view presenter information' from within Preferences, but that blanks out my local screen while running the slideshow on the HDTV. I want to be able to run the presentation within Keynote, but keep the ability to work on other things on the desktop. Anybody done this?
PS, i know I can export the slideshow as a QT video and drag it to the second display and loop it, but I'd like to be able to change slides on the fly without rendering a whole new movie to play on the second screen. Thanks for any input!Under Keynote preferences, there is an option for "Present on Primary Display", or "Display on Secondary Display". Does this not work when you choose secondary display and nave it leave your primary display as your Finder window? Just curious, since I don't have two displays to try it.
-
Can u proxy between two LOCAL zones on a Gatekeeper?
Is it possible to proxy a call between two local zones on the same gatekeeper?
Thanks for any replies.I also tried this last year to overcome issues with Access Control Lists preventing school sites from directly communicating with each other, and unfortunately the answer is no! The proxy will only work with calls to remote zones.
However from version 12.3 (4)T of the MCM gatekeeper IOS, there is also a feature included called IP to IP gateway, which will do what you want, and will actually work better than the proxy as it is codec transparent (the proxy will re-encode your VC to H.261 and G.711).
More info can be found here:
http://www.cisco.com/en/US/products/sw/voicesw/ps5640/products_qanda_item09186a00801da69b.shtml -
Normally I'd use ArtDirector Toolkit, but I can't install it or oter software right now (too long to explain why).
Anyway I have several elements to scale, and I'm trying to find a formula/calculation to determine scale.
Example - 1 object is 3.7486" and I want to make it 5.3231" - how do I calculate the scale percentage to enlarge it?
I know you smart forum folk can help!
Thanks!142.00234754308275 %
Hugh Betcha wrote: Normally I'd use ArtDirector Toolkit, but I can't install it or oter software right now (too long to explain why).
Alternatively, you could Google "scale percentage between two numbers" - yields plenty of free info/calculators -
How to create the reation between two tables without creating relation
Hi,
I have three tables.( A,B and C)
I created relation between A,B and A,C.
I want to create the relation between B,C without using realtion in oracle forms.
Please do the needful.ok, now i understand your problem. It is a case of one-many-many relation between three blocks.
In this situation what i personally follow that - save records in between when it ask for a commit. And i shall advice you to follow that only. This is the safe and easy method.
Otherwise,
1> make your third block a non-database block.
2> When finish entering/modifying each data set related to 2nd block - insert/update/delete the data grammatically into a temporary table. and after that clear the 3rd block.
3> you need to reload the record in 3rd block from the temporary table when you move to a record of 2nd block that has already been entered.
4> now when you finally commit your form the insert/update/delete record from the temporary table into the final 3rd table.
Now follow which ever steps is suitable for you.
Regards,
Tarun -
Find driving distance between two points without using API by use of Lat & Long?
Using Google geocode API : http://maps.googleapis.com/maps/api/geocode/xml?address=thane&sensor=true
We performed get distance between search criteria entered by user and all related clubs by lat & long stored at db.
2. Two different points such as
(origin: Lat1 & Long1) and (destination: Lat2 & Long2)
We tried for to get distance between these two points,
(Lat2 & Long2) to (Lat1 & Long1)
But distance which we get by calculation is simple straight line distance
Origin Destination
(Lat1 & Long1) (Lat2 & Long2)
3. This is not driving distance as google shows in exact Km
4. For that Google provide another API (distancematrix API)
http://maps.googleapis.com/maps/api/distancematrix/xml?origins=Thane&sensor=true&destinations=khopat&mode=driving&language=en%20-%20EN
5. But there is limit for DistanceMatrix-Service without ClientID and client key
100 elements per query.
100 elements per 10 seconds.
2 500 elements per 24 hour period.
But as element request exceeds it shows : OVER_QUERY_LIMIT error
6. In case of Client ID and Client key
In Distance Matrix 100 000 elements per 24 hour period,a maximum of 625 elements per query and a maximum of 1 000 elements per 10 seconds.
As per this one there is option to get purchase these API but basic question is remain same for us if we are requesting single origin and multiple destination then how element calculation done by google?
But in document google says :
Elements
The information about each origin-destination pairing is returned in an element entry. An element contains the following fields:
Status: See Status Codes for a list of possible status codes.
Duration: The duration of this route, expressed in seconds (the value field) and as text. The textual representation is localized according to
the query's language parameter.
Distance: The total distance of this route, expressed in meters (value) and as text. The textual value uses the unit system specified with the
unit parameter of the original request, or the origin's region.Any information that you see in a google map webpage can be retrieved using the API. The best way of finding the tags on the webpage is to manually perform the query using an IE webpage. Then capture the source and save to a file so you
can use a text editor to look at results. I often on a webpage use the menu : View - Source and then copy the source to a text file.
jdweng -
Home Sharing - Can you share between two accounts on the same computer?
I haven't been able to find any info about this, but does home sharing allow you to share files between to different user accounts on the same computer? I have been struggling with trying to do this for years, and I'm really hoping this solves my problem.
This is true in a sense; you have to use the same itunes account to activate home sharing. BUT, you don't need to use the same itunes account for general use.
Example:
My computer and iPhone has one itunes account.
My wife's computer and iPhone have a totally separate account.
I turned on Home Sharing on both machines using one account name and ID - mine.
Now she can see and copy my music and apps, etc. I can see and copy her music, apps, etc.
However, when she goes to the iTunes store, she still can buy and so forth *on her own account*. Same with her iPhone. And I can still do the same as well on my own account on my machine and phone.
The only limitation seems to be updating apps: If you copy apps over to another machine using Home Sharing and install them on another phone running another account, it works great. But you can't seem to update those copied apps, unless you log in on the phone or the computer it syncs up to with the account it came from.
Aside from that, the apps still work even when the computer it was copied to and the phone it was synced to are active on ANOTHER account.
The key is the setup - for Home Sharing. That needs to be one account, but otherwise it's business as usual.
Message was edited by: controller2k
Maybe you are looking for
-
Problems while activating ABAP proxy
Hi All, I am dealing with a problem while I am trying to activate a proxy in Sproxy tcode Package Check for Table/Structure ZDT_ENVIO_DADOS_MESTRES_IN The object TABL ZDT_ENVIO_DADOS_MESTRES_IN uses TTYP PRXCTRLTAB Table Type PRXCTRLTAB Package
-
I tried the "repair" feature but it does not work. Please help.
-
When will Apple fix OS X Lion or are there known fixes?
Can somebody please tell me what the process of bug fixing is with apple for its operating systems? I was very happy with my upgrade to MAC OS X Lion, but after 6 weeks of using it I really hate it. I used to be an apple enthusiast telling everybody
-
Output file in ANSI Encoding.
Hi, I have created a serch and replace program which works fine with normal text files. But it doesn't work with oracle database dump files because I think they are ANSI encoded. Can someone body please point me in the right direction. My program; Ge
-
Problems getting whole library on ipod
hello. I am having problems with my ipod. My library has 3056 items in it and when I update my ipod only 3005 songs are on it. It wont update everything in my library to my ipod. it also wont ut my videos on my ipod. Why is this happening? What can I