Can i just partition my HD by using boot camp 4.0.1 without install window?
Can i just partition my HD by using boot camp 4.0.1 without install windows?
cox i want to use rEFIt to boot up my pendrive to install windows.
Due to some reason the boot camp 4.0.1 cannnot detect my usb drive (that contained windows 7), so thats why i use the rEFIt to boot from my usb drive
Yes, you can.
Let the BootCamp Assistant just make the partition and do not click on "Install Windows"-button.
The result is a preformatted FAT32-partition on your Mac.
Stefan
Similar Messages
-
I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?
What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?
-
hi guys i used boot camp and turned my mac into windows and i wanted to play a pc game called guild wars 2 and i cant find a proper program to actually setup the game
Only if you decide to share with us your particular situation. Guild Wars should install and run like any other Game. Other than the Game Installer, Games don't need some other installer to make them work. Only someone who reads the instructions for the proper installation.
-
Windows partition will not open using Boot Camp on iMac 10.9.5
OS: 27" desktop iMac, Maverick 10.9.5, 8 GB RAM
HD Partions: iMac OS X, Windows 7, Boot Camp
For some unknown reason I am having problems getting Windows 7 to open after starting up in Boot Camp, and it's getting progressively worse. After starting Boot Camp I select the Windows 7 partition and either click on that icon or press "Return/Enter". This is where everything freezes and I have to shut down and reboot again into Boot Camp to try again. Sometimes it works, other times not. I've already tried 8 times tonight but can't get into the Windows 7 partition. The OS X partition and everything else is working fine and I have all of my updates.
Any help or suggestions is greatly appreciated.
Thanks,
DennisI am trying to boot into an existing W7. When I turned on the computer this morning I booted straight into Boot Camp and then successfully went into W7 with no problems, never going into the OS X partition. I later rebooted straight into OS X (the default startup) and read your comments.
I entered the four lines of commands you suggested in Terminal and this is what I got...
dennisetonsimac:~ denedg$
dennisetonsimac:~ denedg$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS Macintosh HD 837.0 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
4: Microsoft Basic Data BOOTCAMP 162.3 GB disk0s4
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *500.1 GB disk1
1: Windows_NTFS FreeAgent GoFlex Drive 500.1 GB disk1s1
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.1 GB disk2
1: EFI EFI 209.7 MB disk2s1
2: Apple_HFS Time Machine Backups 499.8 GB disk2s2
dennisetonsimac:~ denedg$
dennisetonsimac:~ denedg$ diskutil cs list
No CoreStorage logical volume groups found
dennisetonsimac:~ denedg$ sudo gpt -vv -r show /dev/disk0
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
Sorry, try again.
Password:
gpt show: /dev/disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1953525167
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 1634773168 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1635182808 1269544 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1636452352 317071360 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712 1423
1953525135 32 Sec GPT table
1953525167 1 Sec GPT header
dennisetonsimac:~ denedg$ sudo fdisk /dev/disk0
Password:
Sorry, try again.
Password:
Disk: /dev/disk0 geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 1634773168] HFS+
3: AB 1023 254 63 - 1023 254 63 [1635182808 - 1269544] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [1636452352 - 317071360] HPFS/QNX/AUX
dennisetonsimac:~ denedg$ -
How can I use Boot Camp in Mountain Lion to mount Windows XP?
I would like to use Windows XP on my 2009 13" MBP in Boot Camp? I have tried and it only asks for Windows 7 and when I use XP it says unable to install.
1. Is this usual?
2. If so, is there a work around?
I do not have Windows 7 nor will I purchase it. I want to use this computer primarily as Widows XP as my new 2012 MBP is for Mac! Please help!
Thank you!I concur with dalstott with the following additional information:
1. I am currently typing on my 2009 MBP. I installed Windows XP in Bootcamp soon after I purchased it. I then upgraded it to Snow Leopard and then later to Lion, and Lion is what I run today.
Bootcamp continues to function with Windows XP installed. I also have Parallels 7, and, as one of the features of Parallels, I am able to use the Bootcamp partition to run Windows XP within Parallels, as well, for concurrent use of Windows XP and Mac OS X Lion (saving me the duplication of hard disk space if I had to have both the Bootcamp partition and the very large file that Parallels would create for Windows XP).
2. There may well be a way for you to install Bootcamp and Windows XP in Mountain Lion without restoring Snow Leopard:
This method requires access to a WIndows 7 upgrade disc, but you do not need the serial number and you never actually upgrade to WIndows 7 (stop after Step 8):
User Tip: BootCamp - Install Windows XP & then Windows 7
NOTE: Although the author of this User Tip suggests that it will work on all Macs running Mt. Lion, if you read the thread, you will see that others have had problems, and my post suggesting that this method will only work if the Mac could originally install Bootcamp with Windows XP such as yours and mine.
3. While searching for tip #2, I also came up with this suggestion:
Installing WinXP on Lion or above without BootCamp
Good luck and be sure to come back and let us know what works for you! -
I have an iMac that has been updated to Mac OS X 10.6.8. When I purchased the computer, it came with Mac OS X 10.5.6. Will I be able to use Boot Camp 3.0.4 to install Windows without a physical disk of Mac OS X 10.6 or later? Could I get around that if I've backed everything up to Time Capsule? How do I take care of any drivers I may need?
Thanks!Hi,
you need the OSX Snow Leopard Install DVD since it is the only valid source of the BootCamp Drivers.
The 3.0 version of the BootCamp Drivers is only avaiable on the disc.
Later updates (3.1 and 3.2) can then be downloaded from Apples Support website but require that the 3.0 drivers are already installed.
Easiest solution IMHO is to buy a retail OSX Snow Leopard disc for USD 29.
Btw. the seller of your Mac should have included the install disc for the OSX that is on the harddisk.
Regards
Stefan -
OSX tiger installed, can I use boot camp
Looking on the apple websire it seems that i can only use leopard for an OS if i want to use Boot camp, am I understanding this right?
Just wanted to be sure before i bought leopard just so i can run boot camp. I have had my mac a year and actually found a need to run windows, and nothing else will work as well.
thanksWindows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. -
HT1461 Can one use boot camp to play computer games normally only found for PCs?
I have some older computer games, specifically Warhammer 40k rts games, that I woud still like to play and was curious if boot camp would allow me to play those on my mac? Also, if it is possible am I putting my computer at risk in any way? I'd like to play them but not so badly that I would be damaging my mac pro or shortening its lifespan. There dont appear to be any emulators out there currently so I'm checking here to see if anyone knows anything.
Yes. There are several ways to run Windows on the Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows
XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
4.0 and above you can only use Windows 7 or later. Follow
instructions in the Boot Camp documentation on
installation of Boot Camp, creating Driver CD, and
installing Windows. Boot Camp enables you to boot the
computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business,
Vista Ultimate, or Windows 7. Parallels is software
virtualization that enables running Windows concurrently
with OS X.
3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
or Windows 7. VM Fusion is software virtualization that
enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows
applications without having to install Windows. The
Windows applications can run concurrently with OS X.
5. VirtualBox is an Open Source freeware virtual machine such
as VM Fusion and Parallels that was developed by Solaris.
It is not as fully developed for the Mac as Parallels and VM
Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Benchmarks of all of the above except Crossover can be found in Benchmarking Parallels, Fusion, and VirtualBox Against Boot Camp - The Mac Observer. Boot Camp is only available with Leopard or later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive. -
Cannot install windows 7 using boot camp because screen turns off?
I have a late 2008 Macboook Pro 15 inch
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB
Software OS X 10.9
After partition is complete through boot camp my mac restarts to instal Windows 7
The disk can be heard booting up but my screen is turned off.
After a min or so the keyboard goes active but screen remains off.
The disk is a store bought copy of windows 7
I have tried different installers and the same thing occurs the screen just turns off. You can hear the computer running but cannot see anything or do anything.
Have to hold down the power button to restart.
I tried booting it through a bootable usb same thing occurs.
Tried dowloadin drivers and putting them on MBRFAT usb like recomended for iMacs with a similar porblem. That Failed too.
Tried connecting a different monitor it didnt work.
So I am stumped has anyone had this problem. Not the black screen the screen being tuned off.
Ive been searching for days and havent found an answer realting to MBP.Hold the option while turning on the computer. You should see your statup drives. Just choose the OS X drive and eject your disc once in OS X.
-
Thinking about getting a MacBook, using Boot Camp, anything I should know?
I'm going into 8th Grade and my parents are thinking about getting a MacBook for me. Now, because my school uses PCs with Windows, I will need to use Boot Camp so I can save things from Microsoft Office on a flash drive and take it back and forth from home to school. Before I do this I need to know if there is anything I should be aware of because I've seen some weird things on sites about Boot Camp like something called Fat32. I also need to know what version of Windows should I use. XP or Vista? I've heard bad things about Vista like how there are back ways in for Hackers, but it's really eye-catching with it's futuristic look. So should I just wait for Windows 7 to come out and replace Vista in the summer or fall of 2010? (Yes, for people who may not know, Microsoft is developing a successor to Vista known as Windows 7. I read about it in my dad's latest issue of Consumer Reports.)
When you get the computer you can run the Boot Camp Assistant program (Utilities folder) and print out the documentation (it's fairly long.) Read it carefully before proceeding. It should explain what you need to know about installing and using Windows on a Mac.
You can install any 32-bit version of Vista or XP with Service Pak 2.
Windows uses two disk formats - FAT32 or NTFS. Vista requires NTFS but XP can use either. OS X can read/write FAT32 formatted drives but NTFS is read-only to OS X. That means that unless the drive is formatted FAT32 you will not be able to transfer files between the Windows volume and the OS X volume. Neither Vista nor XP are any less secure. Both are vulnerable to viruses and malware unless you run anti-virus/malware software to protect the computer.
There are different ways to run Windows on a Mac. Boot Camp is only one:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not yet fully developed for the Mac - some features are not yet implemented - but it does work otherwise.
6. Last is Q. Q is a freeware emulator that is compatible with Intel Macs. It is much slower than the virtualization software, Parallels and VM Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. -
I tried installing Windows 7 using Boot Camp, but it didn't work.
Although it didn't work, the memory is still divided. So I looked for Boot Camp in aplications, but it literally vanished...
So I tried downloading it again, but I only found EXE files... they don't work on my MacBook Pro...
It's very new... Bought it recently...
Please... I need help to unparticion memory back to original Mac HD and install Boot Camp...
Thanks...Below is the paragraph from the instructions. Follow it exactly and then report what happens at each stage.
How you remove Windows from your computer depends on whether you installed
Windows on a second disk partition or on a single-volume disk.
If you installed Windows on a second disk partition: Using Boot Camp Assistant as
described below, remove Windows by deleting the Windows partition and restoring
the disk to a single-partition Mac OS X volume.
If your computer has multiple disks and you installed Windows on a disk that has only one
partition: Start up in Mac OS X and use Disk Utility, in the Utilities folder, to reformat it
as a Mac OS X volume.
To delete Windows and the Windows partition:
1 Start up in Mac OS X.
2 Quit all open applications and log out any other users on your computer.
3 Open Boot Camp Assistant.
4 Select “Remove Windows 7,” and then click Continue.
5 Do one of the following:
a If your computer has a single internal disk, click Restore.
b If your computer has multiple internal disks, select the disk with Windows on it,
and then select “Restore to a single Mac OS partition” and click Continue. -
I'm using Boot Camp on MacBook Pro (10.8.3)
I am using BOOT CAMP on my MacBook Pro. Running 10.8.3 and Windows 8. All working great....BUT, when I access my work and CITRIX, I receive a warning. It reads "PC5250 - PCSKBD110 - The System Keyboard (type 272, Subtype 2) is not supported. Any fixes or help you can recommend?
nankerphelge wrote:
I am using BOOT CAMP on my MacBook Pro. Running 10.8.3 and Windows 8. All working great....BUT, when I access my work and CITRIX, I receive a warning. It reads "PC5250 - PCSKBD110 - The System Keyboard (type 272, Subtype 2) is not supported. Any fixes or help you can recommend?
Are you using the keyboard on your MacBook Pro? If so, does the problem crop up if you plug in an external USB keyboard? -
HT5628 do you have to purchase a disk copy of windows 8 to use boot camp
do you have to purchase a disk copy of windows 8 to use boot camp.
You need a copy of Windows, disk or download (depends on machine) and you will have to buy it.
-
How can I install windows 7 using boot camp, if the partition will not format correctly?
Hi All,
I'm new to this forum and have had a chance to look around a little bit, but haven't really found an answer to the problem that I'm having.
I have an imac and I'm attempting to use boot camp. I have used it in the past, with prior versions of mac os x, but this is the first time that I have tried it with 10.6.8. The first thing I found out is that I can't use Windows XP, even with service pack 2 installed, because it doesn't find the "boot camp" partition. So, I recently obtained a full retail copy of Windows 7 and have been trying to install it. I have no problem with the boot camp assistant creating the new partition, 200 GB. However, when I insert the Windows 7 DVD and the computer restarts in the Win 7 install screen it tells me that I cannot install Windows on the selected partition (which I expected to see.) So I choose "format" the further format the partition. It doesn't ask me how I would like to partition this, but just seems to start. All seems to go fine until it finishes and i see the same message of "Windows cannot be installed in the selected partition." I can click on the format tab endlessly but it still doesn't seem to work. Does anyone have any ideas? I've called Apple and their technicians keep telling me that I need to reinstall the Mac OS again, which I've tried. It doesn't seem to help either.
Thanks in advance for your help,
DTKDavid Kaff wrote:
Yes, I choose "Format" under the advanced options screen. It seems like it formats, but then I get the same message of "Windows cannot be installed to this disk. The selected disk is of the GPT partition style." I can continue to click "format" but i keep getting the same error.
There is the answer, right in front of us ....
Delete the bootcamp partition and start again the correct partition type is GUID but BootCamp should take care of that automatically so try again. -
Then... I tried to reformat using the start up disk and reloaded everything. When I tried to use boot camp I still get the same message. When I check disk utility, I still show two partitions...same as before... I just can't use the pc side. What's up, please?
I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul
Maybe you are looking for
-
Delay when querying from CUBE_TABLE object, what is it?
Hi Guys, We are using Oracle OLAP 11.2.0.2.0 with an 11g Cube, 7 Dimensions, Compressed and partitioned by Month. We have run into a performance issue when implementing OBIEE. The main issue we have is a delay while drilling on a hierarchy. Users hav
-
PC Sync 2 Synchronisation Extension in Firefox 3.5...
Does anyone from Nokia have an estimated release date for a new version of the bookmark synchronisation extension between PC Sync 2 and Firefox 3.5.2? It's been quite a long time since Firefox 3.5 came out, and those of us who've upgraded have been c
-
K7N2-ILSR not installing windows XP
I got this board well over a year ago and have tried working on it off and on; Of course it is in one of my backup computers. Now, when I first bought it, "secondhand" from a guy online, I found it to be frustrating to work. I had never owned and
-
Can't download music to older iPod after getting the fight generation iPod
I bought the new iPod. I accidentally hit the button that named it the same as my older 3rd gen iPod. My current problem is: recent purchased music won't download to 3rd gen iPod (only new one) because my ipod software is too old (but it won't let me
-
Transfer project/ SO stock between 2 storage locations of same plant
HI, We have a requirement in which the we have to transfer project/sales order stock between 2 storage locations of the same plant.