Can I Logon to Standby Database Using EM Console Without Broker?

Can I logon to standby database using EM Console without broker?

Robert,
# PlsqlDatabaseConnectString 192.168.80.128:7780:kate ServiceNameFormatThat number I've highlighted in bold, is the port number that your Oracle listener is running on, which usually by default is 1521. The fact you have 7780 makes me 'assume' you've tried to use the port number your HTTP server is listening on (I say 'assume' because the number you've used is so similar to what I'd expect the HTTP to be listening on).
Hope this makes sense.

Similar Messages

Error while creating physical standby database using Oracle Grid 10.2.0.5

Hi All,
I am setting up data guard using oracle grid.
Primary database version: - 10.2.0.4
Standby database version: - 10.2.0.4
Primary OS Red Hat Enterprise Linux AS release 4 (Nahant Update 8)2.6.9
Standby OS Red Hat Enterprise Linux AS release 4 (Nahant Update 8)2.6.9
I am creating physical standby database using EM. But it is getting failed with error message in sqlnet.ora file
Fatal NI connect error 12533, connecting to:
(DESCRIPTION=(ADDRESS_LIST=)(CONNECT_DATA=(SERVICE_NAME=INPRDSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=indb50.oii.com)(USER=oracle))))
VERSION INFORMATION:
        TNS for Linux: Version 10.2.0.4.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
Time: 17-AUG-2010 02:40:07
Tracing not turned on.
Tns error struct:
    ns main err code: 12533
    TNS-12533: TNS:illegal ADDRESS parameters
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0As we can see, address_list is empty.
Can anyone suggest what could be the reason behind this?

Dear user13295317,
Here is the error explanation;
Oracle Error :: TNS-12533
TNS:illegal ADDRESS parameters
Cause
An illegal set of protocol adapter parameters was specified.
In some cases, this error is returned when a connection cannot be made to the protocol transport.
Action
Verify that the destination can be reached using the specified protocol.
Check the parameters within the ADDRESS section of TNSNAMES.ORA.
Legal ADDRESS parameter formats may be found in the Oracle operating system specific documentation for your platform.
Protocols that resolve names at the transport layer (such as DECnet object names) are vulnerable to this error if not properly configured or names are misspelled.Hope That Helps.
Ogan

Can i create a standby database in oracle 10g standared edition ?

what are the steps required for creating a standby database using oracle 10g standard edition. or Any other feature for mirroring database in oracle 10g standared edition

Dear mithun,
Please read the following online documentation;
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14239/standby.htm
+"+
+2.3.2 Oracle Software Requirements+
+The following list describes Oracle software requirements for using Data Guard:+
+* Oracle Data Guard is available only as a feature of Oracle Database Enterprise Edition. It is not available with Oracle Database Standard Edition. This means the same release of Oracle Database Enterprise Edition must be installed on the primary database and all standby databases in a Data Guard configuration.+
+Note:+
+It is possible to simulate a standby database environment with databases running Oracle Database Standard Edition. You can do this by manually transferring archived redo log files using an operating system copy utility or using custom scripts that periodically send archived redo log files from one database to the other. The consequence is that this configuration does not provide the ease-of-use, manageability, performance, and disaster-recovery capabilities available with Data Guard.+
+"+
Hope That Helps.
Ogan

Creating standby database using data guard.

Current Env:
Oracle 11.2.0.1
ASM
Size 1.7T and growing.
I'm rebuilding a standby database and need to use rman because of a few factors. In the past, I did a file copy create a standby control file config init.ora and it always worked.
We have a database and had the stanby build; but someone issued a flashback and corrupted the standby database.
Because of the size 1.7T and growing and we are now using ASM.
My research is only showing building standby through rman using dupicate database command.
I would like to copy the cold backup to a external drive and ship it to the standby site where I'll do the restore. This is because of time and bandwith required to rebuild the standby will interfere with operaitions for the period the files are being copied.
So what would be the high level steps.
1) get the cold backup
2) create the standby control file
3) ship the data via corrier
4) restore the database
5) and this is where i'm not sure. recover the standby control file - but during the restore of the database the "normal" control file will open and perhaps do a checkpoint. therefore the standby controlfile will be usless.
6) recover the standby database.
Has anyone accomplished this?
As much specifics will be helpful. This system is operational and needs to be done right the first time.
thanks,
-Rob

Thank you.
1) I'm going to off load the cold backup to an external drive and have a courier take it to the DR site.
Why, we are replicating the SAN over to the DR site. When SAN replication backs up Oracle becomes non-responsive. Therefore; sending the data over the pipe is not an option for the standby rebuild. Yea' that's the easy way to do it. But this system is operational and critical to operations; so we will not risk saturating the pipe for any period of time. The pipe got saturated one time and it was not pretty.
2) I'm running the test in my lab to make sure I can create the standby database using the cold backup and rman.
3) In the past it was easy; I got a cold backup of the data files using the same ksh scripts that have been working for 20 years. Copy the files over to the standby site, and put it into managed recovery. This technique has been working fine sense Oracle 8i days. ASM through a huge monkey wrench in the ksh script backup and now I'm forced to use rman. Hey, I'm told it's an okay product but when it comes to backups I never get fancy; that just makes things more complicated. Okay I wont complain about asm anymore, i guess there is an advantage in there somewhere.
-Rob

Build standby database using cold backup on a different file system & host

Hi gurus,
The database version is 11.2.0.3. OS is HP UX Itanium 11.31
I am building a standby database using cold backup of primary. The primary mount points are (/p003/oracle, /p004/oracle) on HOST1 and the standby file system on HOST2 are (/s003/oracle,/s004/oracle). I am not using Data Guard to apply logs as we have a script that mounts the log location periodically to standby server and apply the logs to make it current. I am using cold backup as the database is small like 200G and can be taken down. Could someone help me with the steps to build standby using cold backup for a different file location in standby ?? My concern is I can copy the data files from /p003 to /s003. How will I build the controlfile ?
If it was same File system on both HOST 1 and HOST2 I can copy the cold backup to the standby server, build a standby control file on primary and copy and replace the standby control file and everything was set.
Thanks
Cherrish Vaidiyan

Hello;
I have a note on this using a cold copy of the current files instead of a copy backup :
http://www.visi.com/~mseberg/data_guard_on_oracle_10_step_by_step.html
I will post SCP SQL in a moment.
Best Regards
mseberg
set heading off
set feedback off
set pagesize 100
set linesize 400
select 'scp '||a.name ||' server_name:' || a.name as newname from v$datafile a;
select 'scp '||a.name ||' server_name:' || a.name as newname from v$controlfile a;
select 'scp '||a.member ||' server_name:' || a.member as newname from v$logfile a;Edited by: mseberg on May 25, 2013 10:35 AM

To create standby database using oracle 10g standared edition

my producation database is oracle 10G standard edition .Can i implement a oracle dataguard or standby database using standard edition licenses.if standby database is possiable in standard edition .what are the steps for creating a standby database using oracle 10g standard edition.

General answer is http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/editions.htm#BABJICBB.
For Data Guard you cannot :
- use instance parameters to automatically send archived redo logs
- use instance parameters to resolve archived redo logs gaps
- create a logical standby
- use SQL statements to do switchover / failover
- use Data Guard Broker.

Problem creating standby database using RMAN

I am preparing standby database on Windows environment. For the same..
1. I have taken full database,archivelog and standby control file backup on primary database.
2.Backup pieces have been moved to standby server.
3.TNS configured on both the servers.
4.connected to target as well as auxiliary database and trying to create the standby database using the below command...
duplicate target database for standby;
But I am getting the below error........
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19870: error reading backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19504: failed to create file "E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM\CONTROL01.CTL"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/01/2009 10:35:48
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
Please provide me the solution for the same...
Thanks in Advance.....
Sukanta

channel ORA_AUX_DISK_1: reading from backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19870: error reading backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19504: failed to create file "E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM\CONTROL01.CTL"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
Can you please confirm if the directory E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM is existing on standby box and rman can write to that location (free space & permissions)
If the issue is still present provide us the control_files parameter from standby..
- Ravi.M

If the production database i down, how to switch to standby database using the replication environment in ASsE

This question is in Business Continuity Plan (BCP)
if the production database is down, how to switch to standby database using the replication environment in ASE

Assuming you're referring to Sybase's Replication Server (repserver) product ...
Repserver moves data changes from one database to another.
Repserver can't 'switch' your application to use a different database; something outside of repserver has to do the actual switching.
If your application happens to be connecting to your ASE via Sybase's OpenSwitch (or similar) product, then OpenSwitch would be responsible for switching your application to use the standby database. Whether you have OpenSwitch perform the switch automatically, or via a manual command, is up to your BCP requirements.
If your application connects directly to ASE then you'll have to decide how/when to get your application to switch to the standby database. In the simplest form this would require shutting down the application, making sure replication is quiesced (ie, all in-flight transactions have been applied to the standby database), modify the interfaces/sql.ini file (used by your application) to point to the standby database, make any customized changes to the standby dataserver/database (eg, unlock application logins, take databases out of 'dbo use only' mode, etc), and startup the application (at this point it should connect to the standby database per the changes to the interfaces/sql.ini file).

How can I connect to the database using ODBC within excel.

Hi,
How can I connect to the database using ODBC within excel and just refresh the data when needed.
Thanks,
Priyanka
Edited by: user554934 on Jun 9, 2009 2:53 AM

This is NOT an APEX relevant question, try posting it in the SQL/PL/SQL Forum..
Thank you,
Tony Miller
Webster, TX

Can't connect to SQL Database using new login

I can connect to Azure SQL Database using the admin ID created when I set up the Azure account. Now I want to set up a different login that has only regular read/write privileges. I have followed the instructions on several web posts, to create
a login at the server level, then create a user at the database level from the login. When I try to connect, though, the connection fails. I get an error message, and a GUID that I am supposed to supply to MS tech support, except that all I have
is a standard Azure subscription, which does not include tech support.
Here is what I have done so far:
Logging in to the server with the admin account with SQL Mgmt Studio, I go to the master database on my Azure server, and create the login:
CREATE LOGIN clouduser@gxw8x04nlb with PASSWORD = 'xoxoxoxo';
This appears to work (password supplied is a "strong" password), or at least it doesn't show any error response.
Then, connecting to the production database in Azure, I set up a user and set permissions as follow:
CREATE USER clouduser1 FROM LOGIN clouduser@gxw8x04nlb;
EXEC sp_addrolemember 'db_datareader', 'clouduser1'
EXEC sp_addrolemember 'db_datawriter', 'clouduser1'
When I attempt to connect to Azure using the new login, however, I get an error message (from SQL Mgmt Studio as well as from MS Access). I am using the SQL Server Native Client 10.0.
The message is:
Connection failed:
SQLState '28000'
SQL Server Error 18456
[Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'clouduser'.
Connection failed:
SQLState: '01000'
SQL Server Error: 40608
[Microsoft][SQL Server Native Client 10.0][SQL Server]This session has been assigned a tracing ID of
'271851d5-8e94-497c-a332-d9d40682bb7a'. Provide this tracing ID to customer support when you need assistance.
Is there some missing step I need to do, to permit the login to see the database? I have looked for such in the various discussions about connection problems, but have not been able to find such a thing. Or extend more permissions to the new
user? Or specify a default user ID for a given login ? (as they do not have the same names, in the examples I have seen). I tried making the user ID the same as the login (w/o the server name), but that didn't seem to help, either.
I have done numerous web searches, and tried about every variation of login or user ID, password, etc. that I can think of, and all of them encounter the same error. It's got to be something very simple - clearly Azure supports more than one login
per database. But's that's all I have at the moment. That login connects just fine, but others won't, using the same PC, middleware, IP address, etc.
Any help would be much appreciated -
Thanks,
Doug

Olaf -
I noticed that, but all of the examples I have seen have Users named slightly differently from the Logins. I did try logging in with the Login name instead. No good. I tried making the Login and the User name the same (clouduser). Also
no good - same symptoms.
I think the problem is that the initial creation of the Login needs to be done WITHOUT the server name on the end.
Logged in to the master DB, I tried: Create LOGIN clouduser@gxw8x04nlb with PASSWORD = 'xoxoxoxo';
That didn't give me an error message, but I think it created a LOGIN of 'clouduser@gxw8x04nlb'. When
referenced from the outside world, I would need to specify 'clouduser@gxw8x04nlb@gxw8x04nlb'.
I tried deleting the logins, and then creating the login 'clouduser' in the Master DB. Then in
the application DB, I created User clouduser from LOGIN clouduser, and then assigned a role. That seems to work!
In my connection string, File DSN, etc. I still need to supply the login as 'clouduser@gxw8x04nlb'.
But when I am logged in to the server, and working in the Master DB or the application DB, I just refer to the Login as 'clouduser'.
Seems a little more complicated than it really should be, but at least I now have something that works.
Doug
Doug Hudson

I got the above error while i restore the standby database using RMAN backu

Dear All,
RMAN> crosscheck archivelog all;
using target database controlfile instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=14 devtype=DISK
specification does not match any archive log in the recovery catalogi got the above error while i restore the standby database using RMAN backup from production.
Help need.i take the backup without catalog database.
regards,
DB

rman> list backup;
it shows lengthier but i showed only the corresponding
BS Key Type LV Size       Device Type Elapsed Time Completion Time
3479    Full    17G        DISK        01:29:42     09-FEB-13
        BP Key: 3479   Status: AVAILABLE   Tag: 09FEB13_FULL_ESMSRV1_DB
        Piece Name: /oradatabkp/rman/esmsrv1_full_db_09feb13
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3479
File LV Type Ckp SCN    Ckp Time Name
1       Full 1759250260 09-FEB-13 /esmsrv1/dbs/system01.dbf
2       Full 1759250260 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3       Full 1759250260 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4       Full 1759250260 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5       Full 1759250260 09-FEB-13 /esmsrv1/dbs/example01.dbf
6       Full 1759250260 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7       Full 1759250260 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8       Full 1759250260 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9       Full 1759250260 09-FEB-13 /esmsrv1/dbs/users01.dbf
10      Full 1759250260 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23      Full 1759250260 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39      Full 1759250260 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size       Device Type Elapsed Time Completion Time
3480    Full    17G        DISK        01:21:30     09-FEB-13
        BP Key: 3480   Status: EXPIRED   Tag: TAG20130209T200021
        Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_full_Feb09
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3480
File LV Type Ckp SCN    Ckp Time Name
1       Full 1759422265 09-FEB-13 /esmsrv1/dbs/system01.dbf
2       Full 1759422265 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3       Full 1759422265 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4       Full 1759422265 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5       Full 1759422265 09-FEB-13 /esmsrv1/dbs/example01.dbf
6       Full 1759422265 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7       Full 1759422265 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8       Full 1759422265 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9       Full 1759422265 09-FEB-13 /esmsrv1/dbs/users01.dbf
10      Full 1759422265 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23      Full 1759422265 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39      Full 1759422265 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size       Device Type Elapsed Time Completion Time
3481    Full    4M         DISK        00:00:03     09-FEB-13
        BP Key: 3481   Status: AVAILABLE   Tag: TAG20130209T212205
        Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_controlfile_copy_Feb09
Controlfile Included: Ckp SCN: 1759462488   Ckp time: 09-FEB-13
BS Key Type LV Size       Device Type Elapsed Time Completion Time
3482    Full    0          DISK        00:00:01     09-FEB-13
        BP Key: 3482   Status: AVAILABLE   Tag: TAG20130209T212212
        Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_spfile_copy_Feb09
SPFILE Included: Modification time: 08-FEB-13
ls -l /oradatabkp
root@drsrv1#ls -l /oradatabkp
total 1108672
drwxr-xr-x   2 ovsd       dba             96 Sep 27 2009 alert_bkp
-rw-r--r--   1 oracle     dba            195 Mar 15 2007 create.sql
drwxr-xr-x   2 oracle     dba           8192 Aug 7 2009 ctrl_bkp
-rw-r--r--   1 root       sys        565114880 Apr 24 2007 drsrv1.tar
drwxrwxrwx   2 root       sys             96 Jun 17 2011 drsrv2-ignitebkp
drwxr-xr-x   4 root       sys             96 Apr 24 2007 esmsrv1
-rw-r-----   1 root       sys        1613824 Feb 22 2007 esmsrv1stby.ctl
-rw-r--r--   1 esmsrv1    dba           5120 Dec 31 2009 esmtables.dmp
-rw-r--r--   1 esmsrv1    dba            538 Dec 31 2009 esmtables.log
drwxrwxrwx   4 root       sys           8192 Mar 10 2009 export
drwxr-xr-x   8 root       sys           8192 Apr 24 2007 finalbackup
-rw-r--r--   1 oracle     dba           3820 Sep 5 2008 invalid.sql
-rw-r--r--   1 esmsrv1    dba         303104 Dec 31 2009 kirdevports.dmp
-rw-r--r--   1 esmsrv1    dba            591 Dec 31 2009 kirdevports.log
drwxr-xr-x   2 root       root            96 Feb 12 2007 lost+found
-rw-r--r--   1 oracle     dba          24954 Aug 9 2009 ovcontrol-090909.ctl
drwxr-xr-x 22 root       sys           8192 Apr 24 2007 ovpi
drwxr-xr-x   2 oracle     dba           8192 Aug 7 2009 pfile_bkp
drwxrw-rw-   4 oracle     dba           8192 Feb 10 15:25 rman
drwxr-xr-x 28 root       sys           8192 Feb 1 17:15 schedbkp
drwxr-xr-x   2 oracle     dba           8192 Jul 11 2011 sdnnm
-rw-r--r--   1 esmsrv1    dba           2196 Dec 31 2009 srirdevports.log
drwxr-xr-x   2 oracle     dba             96 Mar 13 2009 statsreport
-rw-r--r--   1 oracle     dba            966 Mar 15 2007 tbs.sql
drwxr-xr-x   5 oracle     dba             96 Mar 16 2007 testov
drwxr-xr-x   2 root       sys         442368 Mar 11 2009 trendadm_files
root@drsrv1#ls -l /oradatabkp/rman
total 37244448
drwxr-xr-x   2 oracle     dba           8192 Feb 10 15:25 esmsrv1
-rw-r-----   1 oracle     dba        19068198912 Feb 9 14:21 esmsrv1_full_db_09feb13
drwxrw-rw-   2 oracle     dba           8192 Feb 9 21:36 openview
-rw-r--r--   1 oracle     dba         920442 Feb 9 21:37 rmanbkp-all.log

Error while setting up Standby database using Grid Control

I am getting this on grid control 10.2 on windows env while creating standby database using EM. I have checked this folder and it does exists.
any ideas?
C:\oracle\ora10.1\network\admin\listener.ora: java.io.IOException: The system cannot find the path specified

There is no problem tnsnames.ora & listener.ora since I am getting the same error for just standby backup also.
this is error on emoms.trc file
2007-07-18 13:19:37,318 [EMUI_13_19_37_/console/database/instance/sitemap] ERROR perf.sitemap setMaintenancePage.1812 - java.sql.SQLException: ORA-00933: SQL command not properly ended
ORA-06512: at "SYSMAN.ECM_UTIL", line 509
ORA-06512: at line 1
java.sql.SQLException: ORA-00933: SQL command not properly ended
ORA-06512: at "SYSMAN.ECM_UTIL", line 509
ORA-06512: at line 1
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:625)
     at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:180)
     at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:869)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1153)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2932)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3023)
     at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4132)
     at oracle.sysman.util.jdbc.PreparedStatementWrapper.execute(PreparedStatementWrapper.java:173)
     at oracle.sysman.util.jdbc.CallableStatementWrapper.execute(CallableStatementWrapper.java:135)
     at oracle.sysman.eml.ecm.cloneHome.repaccess.CloneHomeSql.getClonableHomes(CloneHomeSql.java:449)
     at oracle.sysman.eml.ecm.cloneHome.repaccess.CloneHomeSql.getClonableHomes(CloneHomeSql.java:561)
     at oracle.sysman.eml.ecm.cloneHome.repaccess.CloneHomeSql.isHomeClonable(CloneHomeSql.java:363)
     at oracle.sysman.db.adm.inst.SitemapController.setMaintenancePage(SitemapController.java:1807)
     at oracle.sysman.db.adm.inst.SitemapController.setRequestAttributes(SitemapController.java:1385)
     at oracle.sysman.db.adm.BaseController.handleEvent(BaseController.java:1154)
     at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:577)
     at oracle.sysman.db.adm.RootController.handleRequest(RootController.java:174)
     at oracle.sysman.db.adm.DBControllerResolver.handleRequest(DBControllerResolver.java:114)
     at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:781)
     at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:337)
     at oracle.sysman.eml.app.Console.doGet(Console.java:318)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:88)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
     at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:336)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
2007-07-18 13:19:42,505 [EMUI_13_19_42_/console/database/dataguard/create] ERROR em.dataguard validate.1118 - CreateBean: ClassNotFoundException: null
2007-07-18 13:19:44,224 [EMUI_13_19_44_/console/database/dataguard/create] ERROR em.dataguard validate.1118 - CreateBean: ClassNotFoundException: null
2007-07-18 13:19:46,052 [EMUI_13_19_44_/console/database/dataguard/create] ERROR em.dataguard mapHelpPage.2002 - StandbyUtil.mapHelpPage: dghelp for database/dataguard/createSchedule not mapped to any help ID.. Defaulting to oemdba_consens_data_guard_page
2007-07-18 13:19:47,130 [EMUI_13_19_47_/console/database/dataguard/create] ERROR em.dataguard validate.1118 - CreateBean: ClassNotFoundException: null
2007-07-18 13:19:53,052 [Thread-85] ERROR jobs.dbclone createTemplate.379 - TemplateManager.createTemplate(): Exception: java.io.IOException: The system cannot find the path specified
2007-07-18 13:19:53,052 [Thread-85] ERROR jobs.dbclone submitJobPreparation.3013 - DBCloneObject.submitJobPreparation(): Exception: java.io.IOException: The system cannot find the path specified
2007-07-18 13:19:53,052 [Thread-85] ERROR jobs.dbclone submitDBCloneJob.3228 - DBCloneObject.submitDBCloneJob(): Exception: The system cannot find the path specified
2007-07-18 13:19:58,006 [EMUI_13_19_58_/console/database/dataguard/create] ERROR em.dataguard onEvent.1038 - CreateConfigController: Exception: oracle.sysman.db.dg.util.VxxStandbyException: The system cannot find the path specified

Creating a Physical Standby Database using OEM GC

This Paper is about the creation of a physical Stanby Database using OEM GC.
You will see that there is really nothing to it and using the Data Guard Broker, performing a switchover is as easy as 1,2,3,.
BTW, this works in both OEM GC 10.2.0.5 and 11.1
http://oemgc.wordpress.com/2010/07/19/creating-a-physical-standby-database-using-oem-gc/

Thanks Rob for sharing this.
Regards
Rajesh

Standby database using RMAN.

Hi All,
Please provide me complete steps to create standby database using RMAN.
Regards.

http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/rcmbackp.htm#i636377

I can't logon onto Telstra Air using My Account details as suggested.

I can't logon onto Telstra Air using My Account details as suggested in a email I received to get access.

From the FAQ. Note that the "wifi" username is only used overseas.
What’s the difference between the Telstra ID username and the Telstra Air username?
Telstra ID username is what customers use to log in to My Account and other Telstra online services. Customers will also use the Telstra ID for accessing the Telstra Air Network. If customers don’t have a Telstra ID, they can register for one online with their account number.
Telstra Air username ends in .telstra.com and can be used to access the Fon Wi-Fi hotspots when overseas when using the local captive portal to login. The login details can be found in My Account Telstra Air username where users can also reset their password.

Can I Logon to Standby Database Using EM Console Without Broker?

Similar Messages

Maybe you are looking for