Can I make a "recolor artwork" into a graphic style?

I may be over-thinking this:
Let's say I have a logo that is made with one spot color, plus a gradient of that spot color and white. I want to quickly change the logo from one spot color to another. I can't make the new colors into a Graphic Style, since the logo has multiple fills. I can't just click on another spot color in the Swatches panel, because it fills all the shapes with 100% of that color.
Is there a one-click solution for this? See example if my writing doesn't make sense

I would defer to Wade's knowledge of typos.
If your spot only shows up in your logo, you can replace the swatch with the new spot swatch.  Pick it as usual out of your library and then option drag the new swatch onto the old swatch. (you could also temporarily move to a new document to do it if you don't want to replace all instances of your old color, but at that point, live color seems more efficient...)

Similar Messages

  • Can you make an existing document into a .pdf file?

    can you make an existing document into a .pdf file? I used to use pdf factory before my system recovery. I do not want to reinstall that program. Can I do this in Acrobat Reader 7?

    Adobe sell Acrobat (in various versions) to do this.
    Aandi Inston

  • How can I make an iPhoto slideshow into a DVD in Lion?

    How can I make an iPhoto slideshow into a DVD in Lion?

    If you MacBook Pro came with Lion preinstalled then you will not have a copy of iDVD.  That's because iDVD and iWeb have been discontinued by Apple and is not longer being included in iLife.
    You can purchase a copy from Amazon.com: iLive 11.
    If you do have Lion this post will self destruct in 10, 9, 8... seconds and you can follow Terence's directionsl
    As for iDVD the following is a recommended workflow to follow;
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • How can I make a imovie event into email size segments

    I recorded a 24 minute bicycle ride and the reults were good.
    I imported the AVI file event into Imovie and the file is now a wopping Mpeg 4   3.78 GB.   HD 1280 x 720.
    I tried to share the file to email to some friends (or a segment of) but was far to big.
    I tried to split clip but no matter what I do that modify menu item remains in light grey and that menu item can not be used.
    In a past version I manged to do this on an earlier release. Currently I am using Imovie 10.0.2 which comes up as the currnet version.
    I also now have a "Share Failed" alarm "The share operation "Theatre-SUNPRO0003" has failed. Video rendering error: -50" come up every time I use IMovie and I can not get rid of it as it keeps popping up every minute and is very anoying.
    I also had the computer slow down considerably and found the problem was Drop box  austomatically started uploading the huge file as did ICloud to begin with.
    Any assistance would be of great help.
    Computer is a 2009 MacPro with 10 gig memory and using OS X 10.9.1 and pretty fast internet connection.
    Regards
    Barry

    iMovie does not allow any editing or splitting of clips in events.  You can only do this in a timeline.  Consequently if you want to split or shorten a clip you have to do it before importing into iMovie.  Quicktime 7 or Quicktime 10 are able to do this.
    Your movie is very big becasue of the high resolution.  You can make it smaller using a lower resolution.  There is a share to email option.   I would not share to Theater - it creates several different version s of the movie and slows things down a lot.
    If you only want to share the movie at original resolution and not do any editing, why not simply upload it directly to Dropbox (i.e. not via iMovie) , splitting it first if your Dropbox capacity is not big enough?
    Geoff.

  • Can we make the .class file into executable one? Urgent

    I just made some java programs, which consist of some GUI and robot, and I need to make them into executable file, mean .exe file. From this forum, there was a suggestion to use Excelsior JET that can make .class files into .exe files.
    and when I tried to use the program, it did the job well, but when I try to put the .exe file into another PC, it can not run as if I run it on the system that I made the .exe file.
    Is there anyone experience this before? is there other solution? and is the the .exe file that has just been generated already include all .class file that are needed by the main .class file that has been converted into .exe?
    Thnks for the helps...

    It is sort of possible.
    A good way of doing this is to use an application called Install Anywhere. With this, you can create an installation file for your application, and it does create an executable. Ive used this a few times myself, and it is really easy to use.
    I think another app to do this is one called JToExe (i think), and this basically creates an executable.
    I hope this helps,
    Osh

  • How can I make two separate photos into a single photo.

    I wpuld like to put together two photos into one.
    I will appreciate your help.
    Thanks.
    Vernon

    If you have iWork Pages can be used to do what you want.
    OT

  • How can I make my Lion Server into a Lion Workstation?

    How can I downgrade my Mac OS X Lion Server to just a standard Mac OS X Lion machine?
    I've tried everything including re-installing Lion. When re-installing Lion, it seems to automatically pickup on the fact that this is a Server OS & installs Lion Server OS.
    I want to simply downgrade my Lion machine to be running the standard Lion OS instead of Lion Server.
    In case you're wondering, this is on my iMac 27" which I originally upgraded from Snow Leopard to Lion, then from Lion to Lion Server.

    @Chris BeHanna
    You were right for the firewall Issue. I was also running IPSecuritas and I installed Lion Server and the traffic stopped responding on the tunnel, although it connected well.
    I figured out that, for some reason, even if the ServerAdmin indicated that the server firewall (my local "new" server, my own machine) was inactive, some rules must had been set during Server.app installation.
    Anyway, what I did was activate the firewall, and then, allow all traffic on every ip. You can do that in the ServerAdmin app.
    And then the traffic turned back on, on the IPSecuritas tunnels.
    The next step would be to be configure rules precisely, but since I am already behind a firewall, I prefer using a "transparent" setting.

  • How can I make a flashplayer video into a quicktime video?

    There is a video on youtube in flash player form how do I use it in a power point?

    It isn't historic...it is current. 24fps is the film frame rate, and now many cameras can record that as well, either natively or with pulldown (now we get complicated). BUT, my point is, that 30fps is the rate of video...historically and current. Every TV show you watch? 30fps. Even the ones shot on film...at 24fps...air at 30fps.
    DVDs...all play at 30fps.
    Shane

  • Make objects with gradient into a stroke style for frames

    Hi Guys,
    I need the frame of the image below as a stroke style (or at least I prefer that above having to copy-paste the elements of the sides 100 times along a frame in my design )
    The thing is: it contains gradients. How do I get the frame to a stroke style so I can easily use it in Illustrator?
    Many Thanks
    Bob

    Hi BobM1990,
    If you are on AICC, you can try using the Image Brushes. You will have to crop the relevant portion of the image and use it appropriately so as to get the desired result.
    You can look for more about image brushes here:
    http://helpx.adobe.com/illustrator/using/images-in-brushes.html
    http://tv.adobe.com/watch/creative-suite-podcast-designers/how-to-use-images-as-brushes-in -adobe-illustrator-cc/
    Regards,
    Dhirendra

  • Can't Drag Album Artwork into iTunes

    For some reason I can no longer drag album artwork into iTunes. If I click on a song or on a group of songs and there is no artwork available, I can no longer drag album art to the "Drag Album Artwork Here" in the bottom left corner. Same goes for when I right click and say "Get Info". It will show a little green plus sign as I drag the picture over the drop area but nothing happens.
    I'm running 10.4 and have made sure that I have read and write privledges to all of the specified folders.
    Anyone have any other ideas?

    Where are you dragging the images from? It might just be that particular site, if you're using the same location time and time again. I use Amazon music when looking for album art for iTunes and generally have good luck with it.
    Are you trying to drag artwork for songs that already have artwork associated with them? Sometimes you might want to clear the downloaded artwork for those tracks and then drag in the new image. I've run into this in cases where I've downloaded a single track from iTunes but then used something else to complete the album.
    Beyond those suggestions, you might want to try re-creating your iTunes Library, per the steps in this document. Note that some data may be lost, such as play counts and date added.
    http://support.apple.com/kb/HT1451
    CG

  • How can I make my user input on the same line as the question?

    The only way I know of doing it is
    System.out.println ("Please enter an uppercase letter of the English Alphabet: ");
              letter = dataIn.readLine ();But that makes Please enter an uppercase letter of the English Alphabet:
    **User input here, a line down**So how can I make it all fit into one line with this sort of layout:
    Please enter an uppercase letter of the English Alphabet:  **USER INPUTS HERE, SAME LINE**

    change your call from println to print.
    check the API docs for this stuff, it tells you everything you need to know.
    Good Luck
    Lee

  • Can we make this query shorter....?

    hi there
    Can any body help me in reducing the number of lines in this query ! I am using union to concat 3 queries. Select fields in every query are same and in where condition also most of the joins are same in every query. but in where clause only two conditions are different. Can we make this 3 queries into one becoze entire select statement fields are same and most of the where conditions are same !
    Below is the query:
    SELECT
    au1.bu_id,
    au1.first_nam,
    au1.last_nam,
    c.id,
    c.first_nam_d,
    c.last_nam_d,
    c.birth_dte_d,
    c.ssn_num_d,
    se.id schd_event_id,
    seu.dsc,
    ssc.dsc,
    sea.access_typ,
    sea.ATTENDEE_TYP
    FROM
    CLIENT c,
    APP_USER au1,
    SCHD_STAT_CD ssc,
    schd_event_url seu,
    schd_evnt se,
    SCHD_evnt_stat ses,
    SCHD_EVNT_ATTENDEE sea,
    CLIENT_APPT ca
    WHERE
    c.id = ca.client_id_k AND
    au1.bu_id = se.APP_USER_BU_ID_PRIME_K AND
    ssc.code = ses.SCHD_STAT_CD_CODE_K AND
    seu.code = se.SCHD_EVNT_URL_CODE_K AND
    se.id = ses.SCHD_EVNT_ID_K AND
    se.id = sea.SCHD_EVNT_ID_K(+) AND
    se.id = ca.SCHD_EVNT_ID_K AND
    sea.ATTENDEE_TYP(+) = 'WORKER' AND
    ses.create_ts = (select max(create_ts) FROM SCHD_evnt_stat ses1 WHERE ses1.SCHD_EVNT_ID_K = ses.SCHD_EVNT_ID_K)
    UNION
    SELECT
    au1.bu_id,
    au1.first_nam,
    au1.last_nam,
    c.id,
    c.first_nam_d,
    c.last_nam_d,
    c.birth_dte_d,
    c.ssn_num_d,
    se.id schd_event_id,
    seu.dsc,
    ssc.dsc,
    FROM
    CLIENT c,
    APP_USER au1,
    SCHD_STAT_CD ssc,
    schd_event_url seu,
    schd_evnt se,
    SCHD_evnt_stat ses,
    SCHD_EVNT_ATTENDEE sea,
    CLIENT_APPT ca
    WHERE
    c.id = ca.client_id_k AND
    au1.bu_id = se.APP_USER_BU_ID_PRIME_K AND
    ssc.code = ses.SCHD_STAT_CD_CODE_K AND
    seu.code = se.SCHD_EVNT_URL_CODE_K AND
    se.id = ses.SCHD_EVNT_ID_K AND
    se.id = sea.SCHD_EVNT_ID_K AND
    se.id = ca.SCHD_EVNT_ID_K AND
    sea.ATTENDEE_TYP = 'ROLE' AND
    ses.create_ts = (select max(create_ts) FROM SCHD_evnt_stat ses1 WHERE ses1.SCHD_EVNT_ID_K = ses.SCHD_EVNT_ID_K)
    UNION
    SELECT
    au1.bu_id,
    au1.first_nam,
    au1.last_nam,
    c.id,
    c.first_nam_d,
    c.last_nam_d,
    c.birth_dte_d,
    c.ssn_num_d,
    se.id schd_event_id,
    seu.dsc,
    ssc.dsc,
    sea.access_typ,
    sea.ATTENDEE_TYP
    FROM
    CLIENT c,
    APP_USER au1,
    SCHD_STAT_CD ssc,
    schd_event_url seu,
    schd_evnt se,
    SCHD_evnt_stat ses,
    SCHD_EVNT_ATTENDEE sea,
    CLIENT_APPT ca
    WHERE
    c.id = ca.client_id_k AND
    au1.APP_ROLE_NAM_DESKTOP_K = sea.ATTENDEE_ID_K AND
    ssc.code = ses.SCHD_STAT_CD_CODE_K AND
    seu.code = se.SCHD_EVNT_URL_CODE_K AND
    se.id = ses.SCHD_EVNT_ID_K AND
    se.id = sea.SCHD_EVNT_ID_K AND
    se.id = ca.SCHD_EVNT_ID_K AND
    sea.ATTENDEE_TYP = 'ROLE' AND
    ses.create_ts = (select max(create_ts) FROM SCHD_evnt_stat ses1 WHERE ses1.SCHD_EVNT_ID_K = ses.SCHD_EVNT_ID_K)
    Thanks in advance
    prasanth a.s.

    Hi,
    it is difficult to change this query without the possibility to test it in a worksheet. But try the following query.
    I think it should be the same result as your 3 queries.
    SELECT au1.bu_id,
         au1.first_nam,
         au1.last_nam,
         c.id,
         c.first_nam_d,
         c.last_nam_d,
         c.birth_dte_d,
         c.ssn_num_d,
         se.id schd_event_id,
         seu.dsc,ssc.dsc,
         decode(sea.access_typ,NULL,' ',sea.access_typ) AS sea.access_typ,
         decode(sea.ATTENDEE_TYP,NULL,' ',sea.ATTENDEE_TYP) AS sea.ATTENDEE_TYP
    FROM CLIENT c,
         APP_USER au1,
         SCHD_STAT_CD ssc,
         schd_event_url seu,
         schd_evnt se,
         SCHD_evnt_stat ses,
         SCHD_EVNT_ATTENDEE sea,
         CLIENT_APPT ca
    WHERE c.id = ca.client_id_k
    AND au1.bu_id = se.APP_USER_BU_ID_PRIME_K
    AND ssc.code = ses.SCHD_STAT_CD_CODE_K
    AND seu.code = se.SCHD_EVNT_URL_CODE_K
    AND se.id = ses.SCHD_EVNT_ID_K
    AND se.id = ca.SCHD_EVNT_ID_K
    AND ses.create_ts = (select max(create_ts)
    FROM SCHD_evnt_stat ses1
                             WHERE ses1.SCHD_EVNT_ID_K = ses.SCHD_EVNT_ID_K)
    AND
    (sea.ATTENDEE_TYP(+) = 'WORKER' AND se.id = sea.SCHD_EVNT_ID_K(+)) --clause of the 1st query
    OR
    (sea.ATTENDEE_TYP = 'ROLE' AND se.id = sea.SCHD_EVNT_ID_K)               --clause of the 2nd query
    OR
    (sea.ATTENDEE_TYP = 'ROLE' AND se.id = sea.SCHD_EVNT_ID_K AND au1.APP_ROLE_NAM_DESKTOP_K = sea.ATTENDEE_ID_K) --clause of the 3rd query
    );

  • TS3988 When I try and log into the icloud, I get a message that my Apple ID is valid but not an icloud account. How can i make it one?

    Whin I try and long into the icloud, I get a message that my Apple ID is valid, but the it is not an icloud account, how can I make it one?

    To use iCloud on a PC, you must first set it up using a device with iOS5 or a Mac with OS X Lion.

  • I have alot of loose photos at home (old) and I would love to make a bunch of iphoto books and make the pages like whole page collages?  How do I get my photos into iphoto in order to do this?  Can I make a DVD at the drugstore and add them to iphoto?

    I have alot of loose photos at home (old) and I would love to make a bunch of iphoto books and make the pages like whole page collages?  How do I get my photos into iphoto in order to do this?  Can I make a DVD at the drugstore and add them to iphoto?

    You can make the collages easily if you have iWork.  Just open a letter sized page in landscape mode and drag the photos onto the page, rotate and postiion as necessary.  Then do a Print ➙ PDF ➙ Save PDF to iPhoto to get a 200 dpi jpeg version of the Pages page into iPhoto.  From there you can add it to your book and use a blank page with the option to have an image as the backbround. 
    If you have a 3rd party image editor that supports layers you can create the collage with it. 
    OT

  • "iCal got an error: Can't Make id of event of calendar 4 into type referen

    Hello everyone. i am completely new to MAC's and very new to scripting. Thanks in advance for any help.
    I am tying to run an Apple Script that is called Scheduled Delivery.
    I'm running 10.4.10 and have the most recent version of the script.
    Basically what happens is I type up and email, add in the email address and save it to my drafts folder. The Scheduled Deliver script, when run, finds all the emails in my drafts folder and uses iCal to schedule a time to mail them (which is a specific time I enter)
    Here is my process I go through-
    I run the apple script by double clicking on the Scheduled deliver Icon, which was in my appications/MailScript folder. It brings up a new window with all my saved drafts. I select the draft I want to schedule a specific time to deliver. This is great.
    When I click on the lower right button "Update Schedule" I get an error message...
    "iCal got an error: Can't Make id of event of calendar 4 into type reference. (-1700)"
    I cannot figure this out. I've tried testing it anyway. I can close the Scheduled Deliver window but the "Done" button is always grey out. It seems to place an event in iCal but no message ever gets sent.
    Any help is greatly appreciated.
    Thanks

    Anyone? Any help is greatly appreciated.

Maybe you are looking for