Can I make more than one edit in a clip in Imovie?

I converted a VHS tape to an MPEG 4 file and wish to edit multiple portions of it. The tape was converted and is only in one clipping. I'm new to IMovie and can't seem to be able to make more than one edit. Where have I gone wrong or is it not possible? Any help would be appreciated.

arosenberg wrote:
... I'm working with IMovie 6.0.3
This info was essential - iMHD6 aka 'iMovie-a' was a totally different app compared to iMovie-b, versions 08, 09 or the actual vers11, which are the main theme on this board ...-
afair, select the clip in the 'bin' on the right hand side.
select your in- and Out-point in the large Preview window with the sliders or by simply hitting the keys i and o
drag from the preview window into your timeline
repeat steps ....

Similar Messages

How can I make more than one account with chat on clubwpt?

I can't make more than one account with chat on clubwpt? i know several players that has made as many as 20 accounts with chat.I can make accounts but clubwpt will not give me chat,they must have my IP address ,because their response is " you r allowed one account with chat only." But as I have said several players have several accounts with chat. Can anyone help me? Are there any programs or plugins that can do this?Any help at all will be greatly appreciate.

Open another iCloud account for the other user.

Can i make more than one faces-config.xml file ?

Can i make more than one faces-config.xml file under one project or application, if yes than how it will link.

Just that you know,
In the second week of july I was taking the Jdeveloper/Jheadstart course at Oracle Netherlands. During that course we were asked to split the faces-config. After splitting it, we were not able to find the navigation rules that were defined in the first faces-config in the web.xml. The Jdeveloper IDE was confused........
However, we were able to use the navigation rules (type in manualy) and that worked in the application.
I talked about it with Steven Davelaar and he thought it might be a bug. I don't know if it's reported, and I don't know if it's fixed.
So, if you get confused.... it works, but Jdeveloper might have some problems with it.
Luc Bors

In Imovie '11, how can I drag more than one set of video clips to my project?

In Imovie '11, how can I drag more than one set of video clips into my project. I know how to highlight in yellow and drag the set, but can I drag a group of sets? Thanks

To select multiple clips, hold down the command key as you click multiple clips. Then you can drag them all at once.
To drag all clips at once, select one, then Edit/Select All. Then drag them all.

We have tvo computer Can I make more than one website Hove do i do?

Can I bulit a website one one cumputer Than built another website on another cumputer? I have tryed !It don´t work
[email protected]

Yes. As long as you have iWeb on the other computert you can create and publish website from it. You can even build multiple websites on one compter if you'd like. Do you know how to add a new site when working on your current site?
Do you want the other computer to also have your current website available for editing? You need to explain exactly what you are trying to accomplish so we don't spin our wheels offering solutions.
Also in Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Can't add more than one title over single clip

This is the first time I'm using a clip that is unedited apart from a title card over black at the beginning that dissolves into the clip and a dissolve to a still photo at the end of the clip. So far I have only been able to add three titles: the first over black, the second over the actual clip, and the third over the still photo.
The clip lasts around a minute so I want to add titles as it progresses. For example, the first title can last for 5 seconds, then a gap of 10 secs. and then another title for 5 seconds, etc. Every time I try to drag the title
Every time I try to drag a title into the project, it doesn't "take." Does iMovie not allow a string of titles if there are no edits within the actual clip?
Thanx.

This applies to iMovie 08:
1) It appears that when you drag a photo or a title to a long clip, then by default, it thinks you want a long photo (or title). It seems like it wants to make the photo 25% or more of the length of the clip. This is why it is hard to drag multiple photos to a clip. The last photo you drag is trying to take up 25% plus of the clip, and there may not be room.
I found a good workaround. I added a dummy clip that was 4 seconds long to the end of the project. (This clip to be deleted before sharing the project). When I drag a new photo to the project, I first drag it to the dummy clip. Now the photo has a duration of exactly four seconds, and I can drag it to the place I really want it. It fits now, because it is only four seconds.
2) I confirmed that when you put over 4-5 photos into a single clip, they will start behaving erratically. One will not show up, and another will show up twice.
The solution is to split the long clip into multiple clips. I had a long clip. I split the long clip into 30 second chunks. To do this, I imported the entire clip several times. Then, in the first instance I selected from frames 00:00 to 30:00. In the second clip I selected frames 30:01 to 1:00:00. Then 1:00:01 to 1:30:00. etc. This way, I did not lose any footage, but I had multiple virtual clips, where before there was only one. Now I was able to add multiple photos to each of these shorter clips with no trouble. And I only needed four photos per clip. It worked great.

I can't make more than one layer show up in the Layers panel.

Hi,
How do I get multiple Layers to show up in the Layers Panel on the right side of the screen? I have two images I want to merge. selecting one displays it right over the other one; I can't perform the Merge.
Thanks!
Lee

From Full Edit (expert Mode) use the top menu:
File >> Open
Choose your first image and click the Open button
Then click File >> Place
Choose your second image and click the Place button

HT5097 How can I make more than one backup at the same time

I use time machine to backup my mac. I want to also make an additional backup on a different hard drive in case the first drive fails. How do I do that?

I suggest you do not use Time Machine for the second backup. Instead, I suggest cloning your drive to a different backup drive using different backup software.
Your secon drive should be the same size as your computer's drive. Start by using Disk Utility's Restore option to clone your computer's drive to the new backup drive:
Clone Lion/Mountain Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
After this initial clone you can use other backup software suggested below to make incremental updates to the backup. These incremental updates can be done on a regular schedule.
Suggested Backup Software
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
The two backups need not be done on the same schedule. Time Machine backsup hourly. The other backup could be done on a daily or even weekly schedule.

Can I make more than one payment on a bill?

I want to pay an amount online with a debit card. Then when the bill comes in the mail, my mom will pay the remaining balance by check. Is this possible?

Great question Rpmcorbin. You absolutely can make a payment online and then another amount via mail. You can access My Verizon at www.vzw.com (sign in as Account Manager), make the payment, enter whatever payment amount you would like to pay. Then mail in another payment via mail, or any other form of payment. If your mom would like to pay online, she can do that as well.
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

How to make more than one person can access the database at one time

how to make more than one person can access the database at one time

Please post further f'up's in the Access forum.
In short: for different reasons it is best practice that each user gets its own local copy of the database. This means that you need to split it into a front-end which only consists of the forms, queries, reports etc. Everything which doesn't need to be
shared. And a back-end, which only stores the data.
Take also a look at Allen Browne's article:
Split your Access database into data and application.
When you've splitted your database, you may often consider to use SQL Server as back-end. Here you may read Armen Stein's
The Best of Both Worlds: Access-SQL Server Optimization.

If I have a pic in more than one album, does iPhoto make more than one copy of that pic? When I search the file name on finder, it seems to be showing one copy of that file for every album it's in.

If I have a pic in more than one album, does iPhoto make more than one copy of that pic? When I search the file name on finder, it seems to be showing one copy of that file for every album it's in.

No it doesn't. Albums simply reference the photos in the Library. A single shot can be in 100 albus and use no extra disk space at all.
If you have the same shot in two Events then yes, the file is duplicated.
When I search the file name on finder, it seems to be showing one copy of that file for every album it's in.
The Finder doesn't really understand the iPhoto Library. It's quite possible for the iPhoto Library to contain many files with the same name. The Library also contains different versions of the same shot - thumbnail, originals and edited version. This is normal.
Regards
TD

Can I assign more than one Pricing procedures to the one vendor.

Hi Gurus,
Can I assign more than one Pricing procedures to the one vendor.
If possible, where it can assign &give the procedure.
My client requirement is :
Vendor supply the goods from two different countries. So, pricing procedure is different because taxes are differ in two countries and currency also differs.
If goods are supplying from country u2018Au2019 ,automatically pricing procedure for that country was trigger. How the system know , which pricing schema is required.
Give me solution

Hi,
Extend your vendor to new purchase organisation. Assaign new pricing procedure to this Purchase organisation.
Use different Purchase organisation while creating POs for the same vendor procuring from different countries.
Regards,
Satya
Edited by: Penjarla Venkata Satyanarayana on Aug 28, 2008 4:21 PM
Edited by: Penjarla Venkata Satyanarayana on Aug 28, 2008 4:23 PM

How can I maintain more than one contact person for a supplier

Hi
As per our business requirement , How can I maintain more than one contact person for a single supplier in SRM?
How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier.
we are in SRM 7, and currently we are creating contact person throug customised BDC.
please advice.
Thanks & Regards
NITIN
Edited by: nitinkk on Sep 9, 2011 10:22 AM

Dear Yaniv,
Thanks for your information,
I am able to create users But my problem is How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier ? Is there any kind of maping is available for the user/ contact person to the supplier no.??
Thanks & Regard
NITIN

Page HTML Body Attribute - can there be more than one in this area?

In "Oracle Database Application Express Advanced Tutorials", Release 3.0, B32469-01 on page 10-10, in the section labeled "Create a Call to the disFormItems Function" in step 6........it reads:
//start citation
In the Page HTML Body Attribute, enter the following:
onload="disFormItems(); first_field();"
//stop citation
My questions are:
Can there be more than one "onload" statement?
If yes, how do you string them together?
Assume the second function I want to add is "disFormItems_local()"
Thank you,
Maggie

Okay, I have figured it out, I believe. So, I will provide my own answer in case someone else is looking for this type of situation in the future.
I edited the page definition by adding another function, disFormItems_local(), to the HTML Header Attribute.
Next, I edited the item's HTML Form Element Attributes to call the function, onchange="disFormItems_local()"
Then, I created a call to the disFormItems_local function in the page HTML Body Attribute, onload="disFormItems(); first_field(); disFormItems_local();"
Other stuff that you will need to know is to be found in Chapter 10 page 8, Enabling and Disabling Form Elements of the 3.0 Advanced Tutorials.

HT2731 can i have more than one apple id on a computer? As when we go away we want to facetime from our macpro to our main mac at home and both are registered under the same apple ID. Thanks

Can you have more than one apple id on a computer. We are going away and want to facetime from our macpro to the mac computer at home but both are registered under the same apple ID. What should we do ?

I will share with you what I have done to manage this with my family. While the solution isn't without flawes, it seems to do the trick. First, you need to have one person who is managing the synching of everyone's devices. In my family, I have three iphones, about to be four, and five ipads. We all synch to the same apple ID to allow one another to take seemless advantage of our Itunes, which is on our Imac. To synch individual music or video interests, we simply select which playlists we want and manually synch that way. A couple of us use imatch and the cloud to make the entire library accessable as well. With respect to the imessage, mail, contacts, etc. we each have a gmail account for our individual emails, contacts etc. So for instance, my forth grade daughter has a gmail account that we choose to synch her contacts, calendar, etc to and then that is also the account where she receives her imessages from on her ipad and itouch. My son, who has an iphone and ipad, does the same thing, but under settings, he goes to imessage and checks his phone number and his email as his preferred way to receive imessages and texts. My wife and I do the same thing. To avoid having everyone see one anothers contracts etc, we only synch contacts from our individual email accounts. Here is the downfall to this: When you update your phone or add a new device, apple always wants to reset everyone's facetime and imessage settings and then low and behold we are all receiving imessages from one another's friends etc. To work around this, I simply take each of their devices and go to their imessage settings and only check the email and phone numbers relative to their devices. I dont' know is this is the best solution, but it seems to work for us.

Can I make more than one edit in a clip in Imovie?

Similar Messages

Maybe you are looking for