Can I move content to ATV using drag and drop?

Sorry if this question was asked before. Please point me to it if it is, coz I couldn't find it.
The situation:
Here's what I am asking for. I have about 400GB of media and many real specific playlists used in the family.
Now I want to have about 20GB of that on ATV.
The problem:
The only way to move the 20GB as I see it right now is to sync the content by creating playlists. And my playlists DO NOT match the content I want to move.
For eg; I want to move all of ledzeppelin to ATV. Its outrageous that I have to create a playlist called LZ just to move it to ATV.
Is there any way I can drag/drop selected content to ATV just like I do on my IPOD? Am I doing something wrong?
Any other ideas?

Actually, I have an update. Finally yesterday night I spent 2 hours creating Artist playlists for ATV syncing. And I created a seperate folder to keep it away from our family playlists.
However, when I go to the syn window, it does not display a folder structure so all my playlists are mixed and sorted in ascending order!!!!!11 @#$@#$#$#$^ Geezzz!!
Come on apple! This is really dissapointing and I hope apple fixes this ASAP.

Similar Messages

Can't move files into trash by drag and drop

with the latest update 10.8.5 I can't move files by drag and drop into the trash on my dock anymore. the files sticks to the cursor.
anyone expierencing the same issue?

Hi Joe,
Welcome to the Support Communities!
Does this issue persist after you restart your computer? The following article will provide some additional troubleshooting steps:
You can't empty the Trash or move a file to the Trash
http://support.apple.com/kb/ht1526
Cheers,
- Judy

When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why?

When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why? I have a heirarchical embedded folder structure under \Documents. Usually, as I drag the file to be moved over the various folders, they will blink twice, then expand/open to reveal contents (in Finder). Now, when the file to be moved is held (hovering) over the destination folder, it will not blink or expand, so there's no place to drop the file. If I release the mouse button, the file image disappears, showing that it is "going back to the place it came from", a.k.a. was not moved. This just started happening. I noticed it after upgrading to Mavericks. Is this a bug or could anything else be causing this?

As of today, Apple Support discovered during a remote support session with me that the same thing happens on their own system. It is isolated to "Column View"; the Icon and List views in Finder behave correctly. Issue is being escalated to engineering, and Apple will call to report status in a couple days. In all likelihood, this is a bug that will need to be addressed in a future update.

I have been backing up iMovie 08 files to my external drive, but for some reason I can't open these files in iMovie. I used drag and drop to copy them.

I have been backing up iMovie 08 files to my external drive, but for some reason I can't open these files in iMovie. I used drag and drop to copy them.

You really should be doing backups with an actual backup application, especially one that will work automatically, and, if your external HD is large enough, back up your entire system. These can automatically back up only what's changed since the previous backup, and some will keep "archive" copies of things you've changed or deleted, also.
Too many things can go wrong, such as your internal HD failing, and you'll have a major project to reinstall everything.
You already have Time Machine, built-in to OSX. You might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions.
#27 in the second link mentions some alternatives, too.

Transfering files using drag and drop to Nano P

I havent installed the supplied disks that came with my Nano Plus but am transfering files using drag and drop from "my music" folder on my computer to the Nano. These files are stored on my computer as the Name of the Artist as the folder name with a sub folder named the CD title (default setting when using Windows media to rip) with the individual track files in that folder.
When I drag the main folder over to my Nano it just displays the Album title on the screen but not by artist and there is no way to select by artist (you can just switch "folders" on the Nano which will then display the CD title. If I used the supplied software with my Nano to transfer the files will I be able to choose by artist, CD, Genre, etc or is this not a function of the Nano?
Is it best to just select the individual song tracks and throw them in one large group on the Nano and then it can figure out which artist, album, genre they belong to?

The player will only show directories that contain music files.
The behaviour you want is common on players that manage their content with a database (typically HD-based devices), but Creative's flash players don't work that way (and the software used on the host computer doesn't have any influence on this - the user interface is controlled by the player's firmware).

How to move javafx stage by mouseevent drag and drop

Hi there,
Do you know how to move stage by mouse event drag and drop event.
My Idea is to create a stage without title header but the user can move it by click the body of the stage and hold it and release it into some where new place by mouse event.
Any body....?
Thanks before

I solved the porblem by using this point code:
onMousePressed: function(e) {
X = e.screenX - stage.x;
Y = e.screenY - stage.y;
onMouseDragged: function(e) {
stage.x = e.screenX - X;
stage.y = e.screenY - Y;
The code can be implemented on every node.
Edited by: 840072 on Mar 15, 2011 8:34 PM

Using drag and drop property in forms.

Hi all,
I want to use drag and drop property in a form during
runtime.I am using oracle 7.3.I don't want to call any
another application.
Is there any way?
Thx in advance.

Mona ! First tell your problem in brief ..Actually what you want
on runtime ...would you like to fetching the data from one item
to another or change the position of any item or
pushbutton ...or what..give detail ...obviously i can help you..
there are many commands like set_item_property ,
get_item_property but right now i could not understand your
prob ..tell me in brief..
You can ask me at [email protected]..
-Anwar

Images resizing when using drag and drop

We just recently got PS Elements 7. I have a blank image that is sized at 600 x 1662 pixels. When I want to put a photo into that blank, I make sure that the photo is 600 pixels high. With 6, what I used drag and drop from the bin, the photo fit perfectly. With 7 it is apparently resizing the photo and I have to stretch it to fit. Is this something that I have set wrong? If I am making sure that both items should fit together based on number of pixels, why is one changing size? Something has to be changing size or the items would fit together. I am assuming that something is set wrong, because this just does not strike me a something that should happen, or the program is not a very efficient photo editor. If necessary I will go back to 5.0, although there are things that I like better in 7.
jean @ buffaloworks

I'm frankly surprised you had success with this in PSE 6, since the past two versions create a special kind of smart object from images dragged up from the bin. You can use copy/paste to create a regular layer, or you can drag down to a thumbnail in the bin from an open image, but the project bin doesn't let you drag up anymore, by design.
Did you mean to say PSE 5 rather than 6? It worked normally there.

Programatic Generation and positioning of components using Drag and Drop

Hi,
I am relatively new to ADF and UI Designing. Im trying to generate a flowchart using drag and drop feature in ADF. This involves creation of dragging images such as start,decision .. etc from one panel to another and dynamically creating a flowchart.
Up to now i have managed to drag images from panel1 to panel2 and create them dynamically in the bean class. However im stuck at this point .. Im not able to position the draggable components on the desired position in the panelGroup. They either appear horizontally or vertically.
Is there any way to achieve this. Also is it possible to assign a dropTarget to a a target component which is created dynamically ?
Thanks in anticipation ....
Lyle

Hi Lyle,
I am too only 4 months old to adf ,i use jdeveloper 10g.
In 10g for the components to be placed at desired locations i think is somewhat possible. While you can arrange them by using spaces which causes
f:verbatim tag to appear or you can use ADF Faces Core items like Object Spacer and Object Seperator where you can set their length and width to space objects on page...
Regards
Rohit

How do i drag indicator control type on WPF instead of using Drag and Drop points

In my WPF application, i have a window which is docked with the screen. i want to automate to expand the window using an Indicator control type, by sliding it. As of now i use StartDrag and StopDrag using specific points, which is not correct when it runs
in many other screens.
Could you please let me know, is there way to slide the control (to set window display size to viewable) without using drag and drop action using points.

Hi Pavithra,
>> As of now i use StartDrag and StopDrag using specific points, which is not correct when it runs in many other screens.
To really understanding this issue, could you share us what you mean by ”which is not correct”? It would be much helpful if you could share us a screen shoot about your UI and your issue.
>> Could you please let me know, is there way to slide the control (to set window display size to viewable) without using drag and drop action using points
Do you mean that the control of the WPF is invisible and you want to set the window display size to make it visible? If so, I think you could use the Mouse.MoveScrollWheel Method to change the windows view until the control is visible. The link below might
be useful to you:
# CodedUI cann't find the controls outside the screen view, Mouse.MoveScrollWheel doesn't work too
https://social.msdn.microsoft.com/Forums/vstudio/en-US/e1dba9ee-dc51-4160-9a1a-a2220c903db0/codedui-cannt-find-the-controls-outside-the-screen-view-mousemovescrollwheel-doesnt-work-too?forum=vstest
If I misunderstood you, please feel free to let me know.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Dragging Icons stops working after organizing using drag and drop. Why?

On the newest MBA (2013)
While organizing my music I was creating new folders within the artists' folder in order to seperate things into albums. sometimes when im dragging the songs into this newly created folder ( I drag them in like groups of 10 , really depends on the length of the album) the ability to drag any icon is completely gone. I can still highlight folders and icons but I can no longer move them at all ( using the three finger move on the mouse pad or by holding the click and dragging )
It only happens when I select and drag a few songs over to the folder and drop them in without waiting for that folder to open up.
This forces me to restart in order to be able to use OSX normally again.
Does anyone have any insight? Do I need to just wait for a new update ?

I found this by EvB on https://discussions.apple.com/thread/4830916
"Try this.
Open a Terminal and type the following commands:
cd /
sudo rmdir tmp
sudo ln -s tmp /private/tmp
If your tmp directory is not already there then the second command will give an error - just proceed to the third command in this case.
Once you have done this sequence, reboot the machine and see if your drag and drop is restored."
Not sure if this fixed the problem or if rebooting temerally fixed it again.
Nope did not fix it

Moving answers in a quiz once they have been matched to a target in using drag and drop

Hi,
I am having a problem with some of my drag and drop quizzes that I'm wondering if anyone you might be able to help me with?
In some drag and drop quizzes I have created, using the Infosemantics drag and drop light widget in Captivate 5.5, I can move the answer after having matched it to a target but before submittting. Whereas in some quizzes I have created, the answers get stuck and do not let me move the answers after I have matched them to a target, even though I haven't submitted. This leaves me no choice but to clear all my answers and start again if I have made a mistake.
Please can you tell me how to enable the answers to move even after they have been placed on a target?

Emma,
Take a look at the troubleshooting tips on this page from the Infosemantics website:
http://www.infosemantics.com.au/adobe-captivate-widgets/drag-and-drop/troubleshooting-widg et-issues
Pay particular attention to the section entitled: "My drag and drop question works correctly sometimes, but not other times. "
From the appearance of your slide, it looks like you may have removed some of the components from the quiz slide that are necessary for it to function correctly. Try the test that this section of the troubleshooting suggests so that you can see if this is the case. If it turns out that you have deleted some items, you'll need to recreate your quiz slide to get them back again.
Hope this helps.

Unable to use "drag and drop function" from outlook

We are changing from Lotus to outlook and this has made a problem with getting pdf-files into OAWD directly .
Procedure was like this in Lotus
1. We get documents (FI, F-43, aso ) by email
2. We use OAWD function "drag and drop" , document is attached to a document type and workflow is triggered
3. We pick up documents from Business workplace , handle the document and send it to the approver (who earlier got it directly in their mailbox "lotus")
so far so good , everything worked well
Unfortunately we changed to outlook, non attached files can be "drag and dropped" into OAWD (I understand the part about outlook is showing links instead of "real" pdf and know this is part of the problem)
My question, it can not be possible that we have to manually save the documents/attached files from outlook into "desktop" to later use the drag and drop function?
I have read about the programms to solve problem , ex "inPuncto", but our experts says there will be problem with connector to workflow from OAWD.
I have my greatest doubts about that because this must be really two diffrent moduls, one for converting from outlook and the other must be unchange (undependent of the earlier procedure). SAP can not know from what program the documents will be dragged?
Suggestion about some OAWD-adaptor ?
Any suggestions about great solutions ?

it seems there is no way.
See note 1797073
Is there someone with a better solution?

Start Workflow when Upload File using drag and drop

Hi,
I am working with SharePoint 2013.
I have a workflow needed to be started and run only once after a document is uploaded into the document library. The document library has
required custom columns with default values. If I set workflow starting option as 'On Created', when user got redirected to the edit form and click 'Save', there would be error as
"The <filename> has been modified by <user> on <datetime>". Besides the unwanted error dialog, the metadata entered by users are not reflected. I understand the issue is because the workflow had already started before
the edit form showed and it modified the file.
So I changed the starting option to 'On Changed", created an additional column to record if the workflow has been run or not to avoid running the whole workflow more than once. This works fine for normal upload. However on drag and drop, the
event 'On Changed' is not triggered and the workflow is not started. I checked the version of the file but in both normal upload and drag and drop, there is another version after the first version. But
only the version of normal upload triggers the workflow.
I read an article about some Mode = Upload on the edit form.
https://go4answers.webhost4life.com/Example/workflow-triggered-during-upload-user-149297.aspx
It seems that the Mode = Upload is not there anymore for normal upload, but it's still there for drag and drop. Not sure about this
Is there a solution for my case. Basically I want to start the workflow only once when the document is uploaded normally or via drag and drop. For normal upload, user can
edit the custom metadata right after they browse the file. For drag and drop, the
metadata will be set as default values.
Thank you.

I'm still researching your issue, but as an interesting note... This is an issue only when I use a 2013 style workflow. I do not get the error when using a 2010 style workflow.
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

Moving Rows in ADF Table Using Drag and Drop

I implemented a drag and drop functionality it works fine, I want to accomplish the following functionality:
The user selects the rows and what if he drags the selected rows and wants to move to section beyond the limit of the table I want to scroll the table in the direction the user is dragging.
I think it should be a default behavior in the ADF table but it doesn't, could you please anyone tell me how to scroll the table while dragging the selected rows?
Thank you,

What make you think that this is a default behavior?
Adf tables a data bound. So the data appears in an order (mostly defined by a sort condition on the db).
Even if you implement this behavior (which is possible but hard to do) you loose the new order by the next round trip to the db.
You may try to use trinidad tables but then you don't have the drag & drop featur (I guess).
Timo

Can I move content to ATV using drag and drop?

Similar Messages

Maybe you are looking for